|
|
ATEK Sensor magnetic products offer a range of mechanical strokes from 10 mm to 30 m with resolution better than 0.005 mm. Operational speeds are typically as high as 3 m/s
ATEK Sensor optical products GLASS Grating Industrial encoders use 5 piece high precision mini bearing manufacturers and special preloaded. Optical Products range of mechanical strokes from 50mm to 12000 m with resolution better than 0.001 mm. Operational speeds are typically as high as 1m/s |
|
With the magnetic distance- and angle industrial measuring systems of SIKO, compact single systems can be assembled.
Besides distance and angle also rotation can be recorded. Special sensors register the incremental segmentation of magnetic rings with a resoultion of up to 20.000 pulses per revolution. Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guaranted.
|
|
Races of 200mm with 12000mm
Stainless steel wire rope with protection nylon
Incremental versions, resolutions of 1mm with 0,05mm
Potentiometric versions, linearity from 0,25% to 0,1% of the scale of measurement, exits analogical
Great simplicity of integration |
|
Designed specifically for use in hydraulic and manufacturer of pneumatic actuator applications, where the sensor is fitted inside the pressurised environment.
Available in a choice of two mounting styles (Internal or External), these sensors can be supplied in lengths to suit actuator manufacturers strokes up to 1100mm. |
|
Din track mounted electronics,
Aluminum encased electronics,
Edge-connector PCB electronics for OEM use.
Ranges: 0.5mm to 15mm |
|
The electromagnetic sensors induSENSOR are based on the well-proven inductive principle. They are employed both in single and large-scale applications.
The measurement ranges of the displacement detection extend from a few tenths of a millimeter to over 600 mm. The actual measurement acquisition takes place without contact and wear free.
|
|
INTRA transfers inductive signals from one or multiple Bircher SafeTecâ sensing edges to an electronic unit for evaluation. The redundant evaluation meets the requirements of the German standard ZH1/494 for professional doors and gates.
The main advantage of INTRA is the capability to monitor sensing edges without mechanical or direct electrical connections between the stationary and moving part of a sliding gate. Compared to conventional sensing edge signal transmission via trailing cable, the INTRA system is virtually maintenance free. |
|
J16PS, J12PS, J10PS Position sensors: A Ge, InAs, or InSb position sensor consists of a single element photodiode with a quadruple electrode geometry. These devices can provide linear X-Y beam position information for professional lasers and other infrared beams. Positioning information is determined as shown in Figure 1. The PA6:4C preamplifier is recommended for Judson position sensitive detectors.
J16QUAD, J10QUAD, J15QUAD Quadrant Detectors: A Ge, InAs, or HgCdTe quadrant detector consists of four separate detector elements arranged in a quadrant geometry with element separations of approximately 0.05mm. The PA7:4 preamplifier is available for J16Quad and J10Quad detectors. |
|
The ODS Red-line program is a series of sensors based on optical triangulation, with different measuring ranges and resolutions. All made to be used environments, ranging from the very hot and harsh applications in the heavy industry to delicate applications in the laboratory. Some models are particularly appropriate for cold or hot rolling of steel and metals. The ODS Red-line sensors are used either for larger measuring ranges or for applications where a long stand-of distance is needed along with high resolution.
Nine different measuring ranges are available, the smallest cover 450 to 550 mm and the largest 2000 to 4000 mm. ODS Red-line sensors are available with measuring frequencies of 1 kHz, 2 kHz and 5 kHz. Higher measuring frequencies deliver shorter distance between the individual measuring points on a moving target, and also increase the possibility of averaging sufficiently to obtain the required high resolution.
All ODS Red-line sensors are supplied with a Select functionality, allowing the sensor to be programmed to calculate a user defined running average. Free software provides easy setting of the Select parameters.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
The non-contact professional laser displacement sensors of the optoNCDT series use various optical measuring principles for meausurement of displacement, distance and position. The confocal sensors are designed for high-resolution measurements, the laser-triangulation sensors are designed for precise measurements in industrial applications and the time-of-flight sensors are designed for huge measuring distances.
|
|
With our new Professional laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal |
|
| The Microtrak II is a state of the art CMOS professional laser triangulation sensor for precise measurements of displacement, position, vibration and thickness. It is unaffected by surface texture, color or stray light. Measurement ranges are up to 40 mm at a standoff distance of 120 mm. |
|
What is a professional laser?
Laser light consists of light waves of identical length which have a defined phase relation (coherence).
Laser systems also have a relatively small angle of radiation.
What are the distinctive features of laser systems?
Laser systems are used where detection of small objects or precise positioning is required. Due to the small angle of divergence this can be achieved over long ranges.
How dangerous are laser sensors?
Due to the small angle of divergence laser beams are focussed on a small area. The energy and power density on this area is extremely high. Depending on the technical data of the laser professional transmitter, this is a risk for human health, specially for the eye. ifm laser detection conform to the Euro standard EN60825 and the international standard IEC60825. These standards describe the operation of laser systems. In the standard laser systems are divided in 5 classes.
ifm laser sensors are classified in the laser protection class 2. Thus the laser power, also in the setting mode is max. 1 mW. When the laser beam hits the human eye the eyelid is instinctively closed. When hitting the unprotected eye the laser beam must cause no damage within a time of 0.25 s. |
|
Professional laser-Sensor-MIDI
Types: Laser light barrier, laser reflex probe with analog output, laser reflex light barrier, laser reflex probe with digital output
Position and distance measurement
Compact design
Ideal for application in robotics
Protection class IP67
Scratch-resistant glass-cover
Application in rough environment
Analog and digital distance probes
Switching distance up to 200m |
|
| The LDS-1000 Industrial laser Doppler Scale (LDS) provides high speed, high accuracy and long range positioning for single or multiple axis applications, such as manufacturer of linear motors, large gantry machines, CNC system tools, CMM's, precision stages, and other linear measurement devices. Based on the Laser Doppler Displacement Meter (LDDM), the LDS is compact, easy installation, easy alignment, less Abbe off-set, no cross coupling, high accuracy, high speed and cost effective. Supplying automatic temperature compensation, home position, TTL AQuadB squarewaves, Up/Down pulses or sinusoidial output, the LDS is compatible with all mainstream controller feedback systems. The LDS has been installed in many high performance machine tools. It is insensitive to dirt, oil and hostile environments. HIGHER RELIABILITY: The LDS withstands exposure to the hostile machine tool environment. And there aren't any moving parts to wear out. The LDS comes with a one year warranty on parts and labor. HIGHER PERFORMANCE: High slew rate(5msec), High Device Bandwidth(800KHz), High Resolution(0.002mm) promote servo stiffness. High Precision 1micron/m, operative field till 50m, beam’s size 5mm, 8mm, 20mm. |
|
Designed to remain non-intrusive, Sentinel and Watchman series offer viable alternatives in demanding applications where other technologies fail.
The Sentinel series of continuous non-contact level professional monitors is used to monitor material levels under a wide range of process conditions, from the simplest bin to the most demanding vessel application.
The Watchman series of non-contact object positioners is designed to give reliable measurement in extreme conditions or long range.
|
|
The LDS-1000 Professional laser Doppler Scale (LDS) provides high speed, high accuracy and long range positioning for single or multiple axis applications, such as manufacturer of linear motors, large gantry machines, CNC unit tools, CMM's, precision stages, supermicrometers and other linear measurement devices.
Based on the Laser Doppler Displacement Meter (LDDM), the LDS is compact, easy installation, easy alignment, less Abbe offset, no cross coupling, high accuracy, high speed and cost effective. Supplying automatic temperature compensation,home position, TTL AQuadB squarewaves, Up/Down pulses or sinusoidial output, the LDS is compatible with all mainstream controller feedback systems.
The LDS has been installed in many high performance machine tools. It is insensitive to dirt, oil and hostile environments. |
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Lika magnetic rings are new products joining the magnetic measurement system range.
Different shapes, dimensions and custom-made versions are available.
The magnetic rings can be completely integrated on customer machine; they are available for diameter up to 500 mm and they can be mounted with any Lika sensor.
Thanks to its environmental features Lika magnetic rings can work in harsh conditions and even in presence of humidity or dirt.
The modular construction of sensor and ring allows to separate the rotary part from reading part.
|
|
Highest quality in most compact form, that is that
SENC 50 of ACU RITE.
The small dimensions and the high accuracies of this taper roller bearingled top illumination measuring system are ideal conditions for the employment in the measuring technique.
* Compact dimensions
* Dissolutions of 0,5 µm to 5 µm
* TTL and similar signals
* Measuring lengths from 50 mm to 525 mm
* Coded reference marks %u2013
Position Trac
|
|
The non-contact Gemco LPS Linear Position sensor manufacturer
uses fi eld proven and reliable magnetostrictive
technology to deliver accurate, absolute and
continuous machine positioning. |
|
|
|
Linear encoders, Linear displacement sensors
