|
|
| Products 91 to 120 of 262 |
| The Ni1000SOT is a nickel thin film resistance temperature detector (RTD) that is suitble for use in contact temperature sensing. The characteristics of the temperature sensor comply with DIN 43760. The Ni1000SOT is manufactured by PVD-depositon on a silicon substrate. The thin film structure is covered by a passivation layer for environmental protection and enhanced stability. The nickel elements are mounted on lead frames and encapsulated in SOT23 packages. This technology allows the production of miniature, low cost, high precision temperature sensors. The Ni1000SOT sensor is qualified for the most demanding automotive applications (including exposure to hot oil) and is suitable for many more applications in harsh environments. |
|
Insert these thin, laminated RTDs in winding slots to detect high temperatures before insulation damage occurs. RTD temperature sensors continuously monitor conditions and provide the long term trend data that is necessary for making adjustments before unexpected alarms occur.
The sensing elements of stator RTDs extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of the windings for best performance.
Some models comply with European standards for electrical apparatus for potentially explosive atmospheres: ATEX Directive 94/9/EC EN 50 014: 1997, General requirements EN 50 019: 2000, Increased safety.
|
|
The relative humidity is in most industry domains and in the quality control a decisive quantity. That is why high requirements relatively to measurement accuracy, long time stability and equipment are postulated for temperature / humidity probes in industrial environments.
The technologically highly up-to-date capacitve humidity sensors used in the TH109 probes fulfill all these requirements. The temperature humidity probes excel also with the following features:
- compact and robust stainless steel housing,
- standardized M12-plug,
- standardized analogue outputs,
- exchangeable filter caps and various fixing possibilities thanks the practical housing form.
The temperature measuring range covers -20°C up to 80°C. The humidity measurement covers the full range from 0% to 100% RH with an accuracy of 2% RH. The areas of application of these probes are for example the climate control, air conditioning and heating installations, building controlling, dryer systems, process controlling, plants construction and in warehouses. Customer oriented solutions are thanks the modular conception realizable.
|
|
Minco humidity and humidity plus temperature transmitters are designed using an advanced microprocessor. Digital signal processing allows these transmitters to precisely match the characteristics of the humidity sensor to a wide range of RH and temperature values found in the many applications the product serves.
The humidity sensor is comprised of an integrated circuit (IC) with a stable polymer element and platinum RTD that is used for temperature compensation. This sensor offers outstanding resistance to airborne contaminant and chemicals, and is protected by a sintered stainless steel filter which resists condensation.
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with a detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
| Conax Buffalo designs, engineers and manufactures sensors in sizes starting at 0.040"/1mm diameter with probe configurations available in over 30,000 combinations of mounting styles suitable for applications from laboratory to large industrial environments. We offer a complete system approach, from sensor to transmitter, to provide a single source to satisfy your temperature sensing needs. It's one more way we give you exactly what you want and make it easier than ever. |
|
| The temperature sensors TF with sensor PT100 of weak inertia ensure the exact measurement of the temperature of the liquid. The liquid-level switches the electrode NS MTS and detectors of level allow the regulation and the control of the levels mini, maximum and of safety of the liquid thus avoiding the risk of total draining, dry walk or overflow. |
|
Product Description:
Libratherm offers micro-controller based Process Transmitter model PTX-3000 for measuring and transmitting the analogue and digital values proportional to the Process Input. It can accept the universal input, which is user selectable using internal DIP switch. Three options are available, where user can specify the model for universal input, any of the two fixed input or any of the single fixed input. The current output of 4-20mA proportional and linearized to the process input is available for remote measurement and indication. For dual input model, two independent 4-20mA are available. To suit industrial requirement the transmitters are available with and without display.
For serial interface with PLC or DCS or with any other process controller – digital serial communication on RS485 bus with MODBUS RTU protocol in slave mode is also provided. Using the RS 485 interface is advantageous, since number of wires coming from the various sensors can be avoided and instead only two wires can be used to interface on serial port. For example, for a large heating system incorporating 16 thermocouples, under conventional method 16 dual core cables will run from the system to the control panel, where as in case of RS485 interface, only two wires will run from the system to the control panel.
|
|
Application:
The device Thermocont ST with integrated digital evaluation electronic is a compact sensor for measuring and monitoring of temperatures in the range from -99,9°C up to +500,0°C.
Because of the integrated four digit digital display and two implemented PNP-switching outputs, separate evaluation and display devices are not necessary in most cases. |
|
Besides manufacturing and selling calibrators from AMETEK Denmark A/S we also produce and sell industrial sensors under the brand name Frode Pedersen.
The STS-100 reference sensors for the DTI-1000 reference thermometer and the ATC dry-block calibrators are also manufactured by this team. |
|
High temperature applications
High pressure applications
ATEX executions
Custom models for special applications
Wells, Flanges and accessories |
|
fluid-Check ® Temperature Sensor TS-1-A-120-3/8“
for measuring flow of oil in pipes.
Installation ONLY 3 Minutes, NO NEED TO CUT PIPES www.servclip.com
Examples:
Temperature of aggregates, overheating of pumps, control of heat exchangers, lubrication systems.
Description
The temperature sensor TS-1-A-120-3/8“ can be used for direct temperature measurements inside pipes such as hydraulic and lubricating oil pipes.
In addition to its robust and compact design, this sensor stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571) Soft seals consist of Viton.
Can be combined with measuring connector serv Clip® type 2 (for mounting on non-pressurized pipes).
Technical data:
- Temperature sensor Type L thermocouple
- Temperature range -30 ... +120 °C
- Output 4 ... 20 mA / 2 wires
- Protection mode IP 65
- Right-angle plug connection DIN 43650 A
- Robust stainless steel housing |
|
Major advantages of this temperature sensor are its high accuracy and the long service life. The sensor can be modified to the customer 's needs regarding measuring range and accuracy.
The response time is less than 5 seconds. A temperature sensor with a wider range is available as well as a submersible sensor (see reverse side of the data sheet). |
|
Temperature switch TSM series
With G1/2" connection thread
Various lengths available
Available functions: temperature bi-metal switch
Contact function: opener or closer |
|
Temperature
ND500 Series: Handheld Digital Thermometers
SC Series : Sheathed Thermocouples
NC Series : Solidpak Thermocouples
NR Series : Sheathed Resistance Thermometers
C015 Series : Roller Surface Thermocouples
R060 Series: Surface Temperature Sensors (RTD)
C060 Series : Surface Temperature Sensors (T/C)
MF1000 : Digital Thermometer For Foods
|
|
| Conax Buffalo designs, engineers and manufactures sensors in sizes starting at 0.040"/1mm diameter with probe configurations available in over 30,000 combinations of mounting styles suitable for applications from laboratory to large industrial environments. We offer a complete system approach, from sensor to transmitter, to provide a single source to satisfy your temperature sensing needs. It's one more way we give you exactly what you want and make it easier than ever. |
|
| Evikon MCI manufactures wide range of sensor assemblies for temperature measurement in gases and air, liquids and on solid surfaces for different applications |
|
Temperature Sensors
- Different type of sensor :
- Pt 100, Pt 500, Pt 1000 resistance bulbs,
- T/J/E/K/N/R/S/B thermocouples or others,
- Execution according to specifications,
- Protection sheat, specific case, seals, screwed connection in every material,
- Extension and compensation cables,
- - Connectors.
|
|
Wired Sensor Elements
C - Cryo Temperature Range (-196°C to +500°C)
L - Low Temperature Range (-50°C to 400°C)
M - MediumTemperature Range (-70°C to 600°C)
H - High Temperature Range (-70°C to 1000°C)
|
|
Honeywell Sensing and Control temperature sensors feature two distinct series. These sensors are thin film RTDs and are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast.
|
|
Temperature Sensor TSA 03 in Stainless Steel for Wall Fastening
TSA 03
Characteristics
Measuring element: Pt100
Output: 4-20mA (2- wire), or 0-10V DC (3- wire)
Max. temperature range: -30°C up to +100°C
Electrical connection: Aluminium case 64 x 58 x 36 mm
Protection: IP66
Reasonable prices
Areas of application
Temperature sensors TSA 03 are used for measuring temperatures in refrigerated warehouses, in greenhouses, in production halls and storehouses, outdoor etc. |
|
Example:
-Platinum-chip temperature sensors in SMD style on epoxy card to EN 60 751, PCSE style (90.6122)
for temperatures from -20 to +150°C
Reference values Pt100, Pt500 and Pt1000
standardized nominal values and tolerance
pre-assembled measuring insert
automated processing is possible
SMD temperature sensors offer a price advantage
|
|
| From miniature detectors to 100 foot averaging thermometers, from flexible Thermal-Ribbons to heavy duty probe assemblies, our selection lets you choose the best model for your needs. We can supply platinum, nickel, nickel-iron, and copper RTDs with curves to match any instrumentation. Minco also offers thermocouples and thermistors mechanically interchangeable with RTD models to help you standardize installations. |
|
ColdMark™ is an environmental indicator. Affixed directly to your products' packaging, this reliable temperature sensor provides indisputable visual evidence of exposure to unacceptable temperature levels, protecting product quality throughout the entire shipping and handling process.
ColdMark™ is encased in a cylindrical tube, specially formulated fluids turn from clear to violet when exposed to temperatures below the predetermined activation temperature level. Four activation temperatures cover a broad spectrum of applications. Simply peel the release liner off the back of the indicator and apply the pressure-sensitive adhesive backing to any dry surface to activate and apply
|
|
Design and fabrication of our industrial sensors correspond
with the technical standard of DIN 43770. Our sensors can
be divided into two groups, depending on the measurement
method used.
Resistance thermometer
Resistance thermometer have a defined resistance value
at 0°C which alters, depending on temperature.
This alteration is presented as temperature value.
Thermo couples
Thermo couples consist of two different metal wires which
are welded together at one point. When the weld spot is
heated, a thermal voltage is generated at the open ends
of the wires which provides the temperature measurement.
The sensors have a modular design and consist of
• a connection head
• a protective tube
• a replaceable measurement insert.
The connection head for wiring is the standard head of shape B. The protective tube and the measurement insert of the sensor vary, depending on application conditions and temperature range.
|
|
| Temperature transmitters are fitted with either Pt100 or Pt1000 sensors. Their change in resistance relative to temperature is transformed into an electric output signal or used to control relay contacts. |
|
At United Electric Controls Co. we manufacture a broad range of temperature sensors. We design, engineer and manufacture:
Thermocouples
RTDs both wire wound and thin film
Thermistors
Integrated Circuit temperature sensors
We also have Temperature Sensor Accessories available
Our ISO 9001 certification is objective proof of our company wide commitment to quality. |
|
|
|
Temperature sensors
