|
|
| Products 121 to 150 of 222 |
AC/DC Power Supplies up to 500 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies 15 - 250 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
The SFB-technology (Selective Fuse Breaking Technology) has been designed to provide up to 6x the nominal output current rating for 12ms. This circuitry allows for individual device protection to activate, preventing the entire DC bus from collapsing.
-Six times the nominal current rating for 12ms
-Adjustable output voltage form 18-29.5Vdc
-Wide operating temperature range of -25° to 70° C with nominal operating temperature rating of 60°C without de-rating.
-Built-in load sharing capability for parallel operation and increased output current
-5 Year USA warranty with optional TRABTECH no-fault warranty
|
|
Universal single and double phase power supplies, CWS series.
185-550Vac input, very high efficiency, low operating temperature . 75, 120 and 24W power, 12, 24 and 48V output.
> 14 A output current peak for 0.5 s for starting-up heavy loads and fuses selectivity.
Short circuit, overload, over temperature, input / output overvoltage protection.
High reliability and immunity against overvoltages due to failures on AC line.
|
|
AC / DC Power Supplies
Enclosed Metal Case
For general purpose applications we offer a range of cost-effective power supplies in low profile metal case with screw terminal block. There are 92 models available from 15 to 1000W with single-, dual-, or triple-output.
|
|
|
TBF-Series is a fully cased AC-DC Converter. High reliable, small sized and high efficient it delivers 300W without Forced air cooling.
|
|
|
AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts.
|
|
|
The DeviceNet protocol dramatically reduces costs by integrating up to 62 devices on a 4-wire trunk network. Communications data is carried over two wires with a second pair of wires carrying power. Discrete and analog devices may be connected into the DeviceNet protocol.
|
|
|
This front-end supports our ETD, ETF and ETG series. An integrated power factor correction circuit provides 0.99 % PFC. Universal input for worldwide plug-in and application is standard. High reliablility and very high density creates space saving comfort for embedded applications and other professional solutions. Fan-less cooling makes for silent running. The unit is approved according to the relevant safety standards.
|
|
ULTRA-COMPACT 1U x 2U FRONT ENDS / RECTIFIERS
UP TO 650W OUTPUT WITH HOT-SWAP
FEATURES:
- Front End or Rectifier Versions
- 5V, 100mA Standby Output
- Hot-Swap or Chassis Mount
- Dual A/B AC Inputs
- Dual A/B DC Outputs
- 12, 24 or 48 VDC Outputs
- Class B Conducted EMI
- DC Good LED
- I²C Serial Data Bus Option
- Up to 9.5 Watts/Cubic Inch
- 1U x 2U Profile: 1.6 x 3.3 Inches
- Staged Pin Engagement
- ORing Diode on Output
- 19" Rack/Shelf Holds 4 Units
- Active Current Sharing
- Universal 85 to 264VAC Input
- SEMI F47 Compliant at Hi-Line
|
|
240, 600, 1200 W, Industrial, Prepared for N+1 Fault Tolerant operation
DC power supply
High quality Industrial Power Supplies
Built-in series diode and undervoltage alarm circuit, for use in N+1 Fault Tolerant (redundant) systems
Very reliable, MTBF 500 000 - 1 000 000
Protected against all overload and short circuit conditions
CE
|
|
SS-300TFX is a full range input TFX 12V Active PFC power supply which complies with 80Plus specifications.
* Full range AC input
* Active PFC
* Specification compliance: TFX 12V V2.1
* Compliance to 80Plus
* Pentium 4 ready with P4 connectors
* Forward converter circuit
* High efficiency and reliability
* Low ripple & noise
* Super low noise fan control
* Short circuit protection on all outputs
* Over voltage, over power protection
* 100% burn in, high temperature cycled on/off
* Approvals: CUL, TUV, FCC, CB, CE, C-tick
|
|
|
The Series D100 DC Dual Output Power Supply is designed to deliver a highly regulated voltage. This supply is ideal for transducers that require a regulated DC voltage for operation, and can also be used where a dual supply is required, such as with the Series 1000 O/D or Model 605 ADT.
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
Daitron Inc offers ultra low noise AC/DC power supply for noise sensitive applications in small foot print, light weight and high efficiency with ultra low noise equivalent to linear type of power supply products at reasonable price range.
See product overview below link;
http://www.daitron.com/original_daitron/catalogs/Ultra_Low_Noise_Power_Supply_Daitron_Dec08.pdf
As a critical power component, our solution can provide high performance in medical, industrial and even other applications, too.
HFS150A series certified EN60601-1 medical standards.
These products line are Green conscious products - RoHS free, Halogen Free PCBs and Vinyl Chloride free.
Also met with several safety standards - UL60950-1, CSA-C22.2, EN61000-4-2/3/4/5/6/8/11, EN55022-B, FCC-B, VCCI-B.
Some specific products comply Harmonic Regulation : EN61000-3-2 Class A compliance*.
* HFD, DFS100/150A, DLS100B series
|
|
The fleXPower range allows for simple configuration of a custom modular power supply with up to fourteen outputs. The chassis consists
of either ten, twelve or fourteen slots, and modules are either two or three
slots wide.
- 400-2400 Watts
- Industrial/IT & Medical Approvals
- Configurable for Fast Time to Market
- SEMI F47 Compliant
- Flexible Series & Parallel Capability
- Output Voltages up to 150 VDC
|
|
AC / DC Power Supplies
Open Frame Construction
Our open frame power supplies with output power from 10 to 300W guarantee an excellent reliability by exclusive use of industrial grade components and an superb thermal management. For easy connection the products are also available with screw terminal block (TOF series) and as option there is a chassis and cover kit offered for all models.The new TOP series provides very high power density supplying 100W in the 4x2" resp. 200W in the 3"x5" standard format with natural convection cooling.
|
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC UPS units.
|
|
Customer specific power supplies and power conversion systems
Our professional development engineers solve even the most difficult problems in accordance with your specifications.
Based on our thorough experience and development process, we have become experts for our customers when it comes to packaging power supply solutions. In this way we can relieve our customers of development and application expenses and provide the necessary environment for trouble-free operation of their devices by using our highly reliable power supply units.
Our vast experience provides a great platform for us to deliver industry specific power supply solutions.
Whether it involves meeting the demands of the rail industry, or under-standing the issues faced by communications engineers, Zentro-Elektrik has the expertise to provide application know how, working with customers from conception through to manufacture of a safe and reliable power supply solution.
|
|
Open Frame Switching Power Supply
Caracteristics
- Open frame switch-mode power supplies which can be manufactured with different features according to the technical needs of the buyer
- Comelit carries out the design of the circuit, technical testing and the attainment of approval certification
|
|
Condor has a broad range of products for OEM industrial and instrument applications with power levels from 6 to 6000 watts. Our line of commercial products are available in standard, modified and custom configurations. We've successfully designed the power for many products for over 25 years including: elevator controls, test equipment, laboratory instruments, embroidery machines, document feeders, engraving equipment, and money order dispensers.
|
|
Daitron Ultra Low Noise AC/DC Power Supply HFS50 series can provide 50W at 5/12/24/36/48Vout options available.
In a small foot print and ultra low noise features are suitable for high end application in industry.
HFS series also has 30W type. (HFS30)
See product overview below link;
http://www.daitron.com/original_daitron/catalogs/Ultra_Low_Noise_Power_Supply_Daitron_Dec08.pdf
|
|
|
The BF-series is a board-type power supply matched with a new design, providing high efficiency, small sizes and low cost. The BF-series is built to meet the harmonic current standard EN61000-3-2.
|
|
Features :
Universal AC input/full range
Low leakage current<0.5mA
Protections : Short circuit / Overload/ Over voltage / Over temperature
Cooling by free air convetion
100% full load burn-in test
Fixed switching frequency at 100Khz
Low cost
High reliability
2 years warranty
|
|
Features:
- Output Modify Range:3V~200VDC
- Full documentation for safety application available (Please contact us for details.)
- RoHS Report
- ISO 9001:2000 TUV Certification
- Part Number Rule
- Split rail, Series, and Parallel, Redundant use, and Remote sensor connection circuit
- Additional services provided for your convenience.
- In house test facility for EMI and RoHS F.O.C!!
|
|
* Light weight, compact size
* High efficiency, high reliability
* Low ripple noise
* Over load, over voltage, short circuit protection
* 100% 50°C burn-in test
* UL, CSA, CE approved
|
|
- Worldwide Medical Approvals
- Single, Dual, Triple and Quad Outputs
- Small Size - Only 7" x 4" x 1.5"
- Power Fail Detect & Remote On/Off
- Universal AC Input with Active PFC
- High Reliability - 350k Hours MTBF
- 100 Watt Convection-Cooled Rati
|
|
Active Power Factor Correction EN61000-3-2 Harmonic Compliance Active AC Inrush Control 2U X 3U Form Factor 7.5" Long 12.6 / in3 +12VDC Output
+3.3VDC Stand-By Hot Plug Operation N + 1 Redundant Internal OR'ing Fets Main & Stand-By Active Current Sharing Built-in Cooling Fans (60mm x 38mm) I2C Communication Interface Bus EERPOM for FRU Data Green LED Status, Power OK Amber LED Status, Power Failed Internal Fan Speed Control Fan Failure Output Signal INTEL, SSI Std Logic Timing INTEL, SSI Std. FRU Data Format AC Shutdown <85VAC or 170VAC
|
|
This classic form of plasma excitation makes use of direct current (DC) generators.
When cost is a factor, this technology offers one of the most economical solutions. These generators, which are used mainly in single cathode systems, are used in DC bias processes such as for metallic mode sputtering.
HUETTINGER Electronic offers a broad range of direct current generators for plasma excitation.
|
|
|
|
AC / DC power supplies: Voltage rectifiers, Other converters
