|
|
| Products 151 to 180 of 222 |
|
|
|
|
Enterprise Network Power Solutions
3G Enterprise Power Solutions - EPS2 Series
Eaton 3G Enterprise Power Solutions (EPS) offer high density and highly configurable, advanced power protection for IT network/wiring closets, communications/VOIP/PoE network systems, low powered telecommunications, and other mission-critical applications.
Data Power Solutions
The Eaton Data-Voice- Video Power Solutions range of DC power systems is designed for telecommunications network applications requiring compact, efficient and flexible DC power supplies.
3G Enterprise Power Solutions - EPS5 Series
Eaton 3G Enterprise Power Solutions (EPS) offer high density and highly configurable, advanced power protection for IT network/wiring closets, communications/VOIP/PoE network systems, low powered telecommunication, and other mission-critical applications.
Enterprise Extended Battery Module
The Eaton Enterprise Extended Battery Module (EBM) is designed as an optional integrated backup power source to the 3G Enterprise Power Systems, providing secure power during AC grid failure for anything from orderly shutdowns through to extended runtimes for continuity of service. Multiple battery modules can be connected together to achieve increased backup capacity for a given output demand.
|
|
Eaton APR48-3G Access Power Rectifiers are designed specifically for network access applications such as cellular base stations, customer premises equipment and road-side cabinet installations.
The new generation 3G architecture of the APR48-3G Access Power Rectifier has improved space utilisation so rack space can be maximised for use with telco equipment and not power equipment. The APR48-3G size has been reduced by approximately 50% with an increase of power output by 20%, over the previous model. This more than two-fold increase in its power density allows as little as 2U of rack space to be occupied by power.
Operating with the Eaton SC100 or SC200 series of system controllers, the APR48-3G rectifier modules will provide years of cost-effective, and trouble free service for your 48V network access equipment.
|
|
|
|
|
|
Application
The ASi switch-mode power supply is a powerful and robust device to power sensitive loads in a hard industrial environment. These features result from the modern construction with a good radio shielding and high reliability integrated in a functional and stable casing. The short circuit proof output DC voltage is 30.5 V. This power supply is optimally suited for loads requiring
high starting currents.
Functional principle
In the ASi power supply a flyback converter operates to transform the energy in two steps. During the conducting phase the diode is blocking, the inductor is energized and a magnetic field establishes. There is no electrical transmission; the consumer load is supplied with energy from the capacitor.
When the switching transistor opens, the blocking phase begins. The current in the inductor cannot change immediately, discharges through the diode and a negative voltage establishes at the inductor.
Now operating like a power source the inductor reloads the capacitor and supplies the consumer with energy. The energy flows from the inductor into the capacitor and the consumer and through the conducting diode back to the inductor.
Technical data
Input voltage: 85-270 VAC / 120-400 VDC
Output voltage: 30.5 VDC
Output current: up to 4.0 Amp
Power: up to 122.0 Watts
Efficiency: 89%
Operating temperature range: -30°C / +70°C
Mounting: on rails acc. to DIN 46277 or wall mounting with screws
|
|
|
Test laboratories are confronted by a huge range of electrical and electronic products with vastly differing power requirements. Frequency and voltage combinations not available from the mains power outlet. Test samples that cause inadequate supplies to cave-in under load. PS3, from EMC PARTNER, solves these problems instantly. Convert the mains wall plug into a custom AC and DC power supply, changeable at the push of a button to any pre-selected frequency or voltage combination.. PS3 is flexible enough to perform EMC immunity tests for CE mark compliance yet stable and robust enough to drive magnetic field antennas. PS3 can be used for industrial, telecom, transport and a host of other applications. An innovative design incorporating the very latest technology, PS3 gives the right power right when it’s needed.
|
|
Ideal for home use, schools, laboratories or R & D facilities. Robust design, digital LED volt- and amperemeters, extra outputs and closed housing for improved safety.
- AC and DC outputs, continuously adjustable
- Outputs: 0..32V DC/AC and 0...300V DC/AC
- Extra outputs: 3/12/18/24V AC
- Currents: 0...2A or 0...5A
- Galvanically isolated
- Filtering switchable
|
|
|
|
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
|
|
|
|
Multi-Channel I-V Test Solutions, Source Measure Units (SMU), Curve Tracer, and Precision Power Supplies for current/voltage source/measure capability.
Series 2600 System SourceMeter instruments offer electronic component and semiconductor device manufacturers a scalable, high throughput, highly cost-effective solution for precision DC, pulse, and low frequency AC source-measure testing. Building on the tightly integrated source-measure technology originally developed for Keithley's popular Series 2400 SourceMeter line, Series 2600 instruments provide from two to four times the test speed of competitive solutions in I-V functional test applications. They also offer higher source-measure channel density and a significantly lower cost of ownership than competing products. The analog-to-digital converters provide simultaneous I and V measurements in less than 100μs (10,000 rdgs/s) and source-measure sweep speeds of less than 200μs per point (5,500 points/s). This high speed source-measure capability, plus advanced automation features and time-saving software tools make Series 2600 SourceMeter instruments an ideal solution for I-V testing of a wide range of devices.
|
|
AC current supplies for laboratories Range
The output voltage is completely isolated from the mains and can be
adjusted from 0 to 250 V
Isolating transformer to EN 61558, VDE 0570
|
|
| ... products without technical information |
| |
|
|
AC / DC power supplies: Voltage rectifiers, Other converters
