|
|
|
|
|
|
Power Supply Modules
• Range of Fixed or Variable Power Supply Module
• Battery Simulator Module Capable of Sinking or Sourctng Current
• Fixed Supplies Have up to U User Specified Outpi Voltages
• Variable Supplies Can Deliver up to 48V Per Channel With 2A Maximum Current
• VISA and Kernel Support For PXI Environments
• Complies with PXI and CompactPCI Specifications
The 41-720 range of Fixed Power Supply modules provides the user with up to 4 separate voltage outputs isolated from the PXI backplane. Any combination of 3.3V. 5V. 12V or 15V can be specified with a maximum current capability of 4A for the 3.3V option Software provides on/off control and status monitoring for each output.
Programmable Power Supplies provide voltage outputs which are fully adjustable under software control. The 40-735 delivers posilive 10V and the 40-736 delivers negative 10V. both with a maximum current of 1A. The output voltage can either be derived from the PXI chassis supply or from an external source.
The 41-740/741 are dual Programmable Power Supplies and can deliver up to 48V at 2A. They are fed from an external AC mains, or DC 56V supply.
|
|
|
|
|
|
Characteristics
DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering. Due to its compact design, the units take up only one half 19" width. A 19" adapter is available for mounting the R&S NGSM into test racks.
Application-specific characteristics
Car electronics
R&S NGSM is a precise and, thanks to its versatility, an extremely economical tool for use in the production of electronics. With the aid of an IEC/IEEE bus or RS-232-C interface (optional), the power supply can readily be integrated into in-line production systems. The startup curve in line with DIN40839 can be adapted to other factory standards by reprogramming it. High surge currents typically occur in applications such as central lock-ing or ABS, but with a pulse current of up to 30 A, R&S NGSM32/10 is ideally prepared for these applications.
Mobile radio systems
The high resolution for current measurements allows the maximum operating time of a mobile phone to be accurately predicted; typical voltage drops during the startup of a car - which have to be tolarated by telephones operated at a car net can be simulated.
DC Power Supply R&S NGSM is insensitive to the RF voltage conducted from a device under test or radiated from a nearby antenna.
|
|
|
Power Management IC solutions ranging from standard ICs to high performance plug-in, power brick, digital power and integrated power modules.
|
|
The model 9124 is a laboratory grade, 0-72V/0-1.2A programmable DC Power Supply providing great performance and features not found in other supplies in this price category. The power supply was designed to meet the needs of today’s applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution/accuracy and fast transient response time.
* Excellent display resolution
* Fast transient response time (<20ms)
* SCPI compatible
* RS232 interface (standard), USB optional
* Closed case calibration
* Compact size for bench use or rack mountable (2U x 1/2U size)
* DVM and Miliohm meter
* Discrete Fault Indicator/Remote Inhibit (DFI/RI). Useful for turning multiple power supplies On/Off simultaneously
* Application Software for front panel emulation and simple test sequence generation included
|
|
|
|
|
|
GPIB Programmable DC Linear Power Supply ( PPS 3520)
Dual output 35V/ 2A
Model: PPS-3520
Standard GPIB Interface
Electronic Calibration via Front Panel or GPIB
Programmable over voltage and over current protection
Low ripple and noise output
Voltage controlled external programming capabilities
Output enable and disable
Remote sensing function
Programmable up/down fine tuning
Power-off memory
PPS-3520 GPIB Programmable Power Supply
GPIB PPS 3520 Specifications:
DC Output Max Ratings : 70W per Channel
Output Voltage : Dual 0 to 35V
Output Current: Dual 0 to 2A
Programming Accuracy :
Voltage 0.05%+2LSB
Current 0.15%+5LSB
Programming Resolution :
Voltage 10mV
Current 0.6 mA
Operating temperature 0 to 50 deg C.
Ripple and noise : 1 mV rms
Ripple peak(p-p) : 10mV p-p
Read back Accuracy
Voltage 0.1%+2LSB
Current 0.2%+5LSB
Transient Recovery 50 micro sec. typical
Programming up/down speed 15ms/20ms typical
General
Power requirement : 115V , 230V AC+10%, 50/60Hz
Dimensions : 8.7"(W) x 3.4"(H) x 11.8"(L) (220x86x299mm)
Weight : 18lbs (8.16kgs)
Accessories : Test leads, power cord and owners manual
|
|
Our broad selection of both bench-friendly and system-ready instruments can meet your testing challenges - from basic to complex - with a wealth of available capabilities.
* Test confidently with clean, precise DC power that's fully specified and guaranteed
* Safeguard loads from potential harm with robust output protection and fault detection capabilities
* Enhance system flexibility with built-in, DMM-quality measurement functions
|
|
SM800 - Series
800 W, Bench, Programmable System
DC power supply
NEW
* High quality Power Supplies, designed for long life at full load
* Protected against all overload and short circuit conditions
* Very stable voltage or current 5.10-5 - 10.10-5
* EMC: class B for Generic Emission. Can be used safely near sensitive equipment
* Accurate voltage and current control by 10 turn potentiometers
* Potmeters optionally replaced by digital encoders
* Programmable by Analog voltage, Isolated analog, Ethernet, RS232 or IEEE488
* Sequencer option, for both waveform generation and stand-alone automation
* CE
* High Speed Programming versions available for ATE, Laser Diodes
* 2 Autoranging (AR) versions, doubles voltage and current range
* Power Sink Option: 2 Quadrant operation for PWM motor testing or fast down programming in ATE systems
|
|
|
|
|
|
XHR provides 1000 watts of programmable DC power in a compact half-rack package. It is available in eighteen 1 kW models. Its unique features and size make XHR ideal for OEM applications where high power and wide adjustment of output voltage or current is required, and a compact half-rack configuration is advantageous.
It is stackable with a small foot print, front panel binding post connectors and a low current requirement that allows it to be plugged into a standard 120 VAC, 15 A circuit. State-of-the-art zero voltage or "soft" switching technology virtually eliminates switching transients for high efficiency, low noise and high reliability. XHR is also power-factor-corrected for low current draw (only 11 A at 120 VAC for 1000 watts) and reduced generation of input current harmonics.
The half-rack XHR is ideal as a "companion" for another half-rack instrument in a test system equipment console, eliminating the need for a blank panel while preserving vertical rack space. With a choice of rear and/or front panel connectors, XHR offers added system flexibility.
|
|
|
A range of multi function products specifically designed to suit the requirements of all combined heat and power, co-generation, diesel and gas engine generator applications. This high quality product portfolio offers the generator set manufacturer and panel builder a flexible mix of contemporary and traditional products, including a comprehensive range of generator set controllers, integrated digital power metering, and a one stop solution package of measurement, protection and control instrumentation.
|
|
|
|
|
|
The modular AMKASYN servo inverter series KE/ KW consists of a compact supply module (KE) and different compact inverter modules (KW) in various power ranges.
Features:
- Power range up to 120 kVA
- Modular design
- Nearly limitless module arrangement
- Number of servo axes at a supply module is limited only by total power
- Cooling with coldplate technology
- Regenerative feedback optional
- Variable encoder technology standard encoder inputs for resolver, square or sine-wave encoder, EnDat, Hiperface pulse forwarding
- Multifunctional networking via powerful ACC bus
- PLC functionality optional
- Fieldbuses:
- SERCOS
- Profibus DP
- CAN
- EtherCAT
The most important advantages at a glance:
- Reduction of control cabinet space through compact devices
- Cost savings through possible integration of control cabinet in machine
- Cost-optimized solutions through modular system design
- Complex networked machines possible through precise synchronization
- Simple implementation of motion control functions through integrated PLC
- Integrated safety functions to category 4
|
|
Model ORION-D4602P
460W+460W mini-redundant switching power supply with active PFC
Mini-redundant power supply suitable for 2U/4U and larger chassis
Active PFC, full-range input
Two independent AC inputs
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-A4001
400W 1U ATX power supply with active PFC
Low profile power supply suitable for 1U and node chassis
Active PFC, full-range input
Support for dual Intel® Xeon™ processors
Total output of +5V and +3.3V is 50A
Max. +5V standby output is 2A
|
|
|
Vibra-Metrics designs and manufactures a wide variety of single and multi-channel low noise, portable battery powered accelerometer power supplies, as well as line powered units designed for lab use, rack mount, and a variety of applications. Many connector options are available to insure the flexibility you would expect from V-M products. For specifications click any series number.
|
|
- Input fuse protection
- 100 % thermally protected.
- Floating output, continuously short circuit and open circuit
proof.
|
|
MEN Power supply unit 1/2-phase, smoothed IN: 115/230+/-15VAC OUT: :24V/1ADC
Current: 1 A
Output rating: 24 W
– Single-phase, smoothed
– touch protected acc. to (EN 61558)
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
# The Model 1672 is a Quad Display Triple Output DC Regulated Power Supply that provides one fixed output (5V/ 3A) and two variable outputs (0 – 32V/ 0 – 3A) ratings. The four displays allows the user to continuously monitor the voltage and current values of the two main outputs. The variable outputs can work independently, or in series tracking, or parallel mode. Independent control of Voltage and Current for variable output
# CV/CC operation
# Separate 3 digit displays for voltage (Green) and current (Red) for both variable outputs
# LED indication for CV (Green) and CC (Red) modes
# Overload indication LED for Fixed output
# Series tracking and parallel mode operation for Triple output unit
# Output terminals are banana style (not binding posts), click on Accessories for leads
|
|
|
The EG...-130-... series control units contain a DC-side short-circuit protected power pack, voltage stabiliser and output relay. The control units can be actuated by all 2, 3 and 4-wire sensors with PNP, NPN, No, NC or antivalent functions.
|
|
Systems with a DC outlet transform the input alternative voltage, which was pre-conditioned, into a direct, filtered and controlled voltage supported by a series of batteries which is the ideal power supply for Telecommunications operator equipment and other types of equipment with a DC power supply, in which a faulty supply make cause the interruption of the services offered to customers or defects in the production, etc.
SALICRU has two ranges of rectifiers DC Power Systems DC Series OPTIMUS and energy systems of the DC series FAC P.
|
|
|
|
|
|
The Teledyne Hastings Instruments Digital 4-Channel Power Supply units are featured in a half-rack profile for simple drop-in replacement of the existing Model 200 and 400 units.
The THPS-400 instruments incorporate many features including an integrated totalizer with a count-up or count-down options, user selected filtering of readings, serial communications or Ethernet, communications.
These units also offer a simultaneous display of all four channels or selective blanking of unused channels, ratio control with analog outputs for stacking multiple power supplies, and easy to follow, menu driven calibration and setup.
Also available are the THPS 100 Power Supply units which are self-contained power supply and display for gas mass flowmeters, pressure transducers or any device with a voltage output. The units feature an automatically generated set point (0-5V or 0-10V), making it ideal for use with flow controllers and pressure controllers. Features include 4.5 digit display, ±15 volt, 250 mA transducer supply and CE compliance.
|
|
|
|
|
|
They may be unglamorous and unobtrusive, but without them it would not be possible to operate an electronic system. Power supplies are essential. They provide the voltage supply for sensors, actuators, controllers and other electrical loads. ifm offers low-cost transformer power supplies but also powerful switched-mode power supplies for different applications.
Transformer power supplies
Transformer power supplies provide a low voltage, normally 24 V DC to supply PLCs, sensors or evaluation electronics. A transformer according to DIN 0551 ensures a safe electrical separation from mains voltage and low voltage. The output voltage can be regulated (± 5%) or smoothed by means of capacitors. The different designs and output powers allow adaptation to diverse operating conditions.
Switched-mode power supplies
Primary switched-mode power supplies are a compact and economical solution to supply sensors, actuators and sensitive electronic components and are gaining more and more acceptance. As opposed to conventional transformer power supplies with regulated output voltage primary switched-mode power supplies need no heavy transformers so that there are fewer iron and copper losses. They are therefore distinguished by a very high degree of efficiency of up to 92 %.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
Performance:
The high-quality design of Comdel's XDC 1000 assures ultra reliability, while the small size fits easily into your system. What's more, with the XDC's flexible options and controls, you don't need to purchase a new power supply every time you make a change in your system. Current and voltage control capabilities are standard with each supply.
Applications:
Comdel's XDC is the ideal supply for reactive PVD sputtering, DC Bias and hard-coating applications.
Features:
Compact, lightweight, 3 1/2" rack-mount DC generator
Accurate output control by voltage or current
Self-limiting circuitry that eliminates short-circuit failures
Low stored energy that reduces arc damage
Front Panel, continuously variable control of output voltage and current
Calculated MTBF: 30,000 hrs. minimum
|
|
|
The PSR series power supplies are regulated DC power supplies capable of operating from 100/240 VAC input, 50/60 Hz. The PSR power supplies include a shunt regulator and blocking diode. They can be used with any controller/amplifier combination to provide a complete solution for single- or multi-axis applications. The PSR series are available in two models: PSR-12-24 and PSR-6-48.
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
|
The PWR Series offers constant voltage (CV)/constant current (CC) automatic crossover DC power supplies that enable you to combine a wide range of voltages and currents within the output power rating. For example, the model that has an output power rating of 1600W (PWR1600L) provides a seamless operation range from 80 V - 20 A to 16V - 100A. With a single PWR Series power supply alone, you can cover an extensive output range equivalent to what is provided by three to six conventional single range DC power supplies. L type can output up to 160% of the output current rating (in the continuous and intermittent extended operation areas). PWR1600L supports a maximum output of 10 V - 160 A.
|
|
Features :
- AC input range selected by switch
- Protections : short circuit/ Over load
- Cooling by free air convection
- 100% full load burn-in
- Fixed switching frequency at 37 Khz
- Lost Cost
- High reliability
- 1 Year warranty
|
|
|
|
AC / DC power supplies: Voltage rectifiers, Other converters
