|
|
| Products 91 to 120 of 222 |
Single Phase Power Supplies
Based on the experience we have built over the past 30 years, we are offering a wide range of power supplies which provide many features to meet customer requirements. We have compact standard Power Supplies and as well versions with display, which provide additional information such as maintenance forecast monitoring, or total run time, both with under-voltage alarm. The slim housing features two under-voltage alarms which indicate lifetime. Last but not least, we offer our modular power supply with multiple configurations and features.
Three Phase
The 3-phase power supplies are available from 120W up to 960W at 24VDC. The key features of this family are the slim and compact housing and its high efficiency. All with natural ventilation.
|
|
|
The MN-2PS40 is an unregulated, linear DC power supply that provides 40VDC to the ControlPoint network. This supply is ruggedly constructed, with de-rated components to ensure long life and reliable operation; built-in fusing prevents damage due to prolonged overloading or short circuits. The extruded case provides various mounting configurations.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
|
Eaton has an extensive line-up of 24VDC switch mode power supplies to fit almost any application. Available with a variety of features including DIN rail and panel mount, Class 1 Divison 2 ratings, parallel capabilities, and many others. Choose from the basic and inexpensive ELC power supplies, the general purpose & heavy-duty industrial PSG series, or the high current boost (outrush) and feature-rich PSS series.
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
Lütze Power Supply Units: Filtered, single-phase and three-phase; All power supplies carry UL-CSA approval; Layout according to EN 61558-2-6 or EN 61000-3-2 and 3-3; 100% ED at nominal load up to 60ºC.
Lütze Primary Switched Power Supplies: Single-, two- and three-phase; Universal usage thanks to wide-range input 85-550V; Versions for 2-,5-,10-,20- and 40 A, with Power Boost function; Overload or shutdown function; Snap-fit on 35mm DIN rail; PFC.
|
|
TELE is your reliable source of DC power
TELE offers you a wide range of power supplies with a variety of voltages and functions together with very high efficiency, covering compact DC supplies, installation-type units and regulated switch-mode power supplies. The regulated switch-mode power supplies provide a wide input voltage range and electronic short-circuit protection against overloading.
|
|
Transformers and power supplies are important links in the supply of power to automation systems. They are the core of each and every switchgear cabinet.
In the supply of power to electronic modules cabinet a control voltage of 24 V DC has become generally established around the world as the power supply for all electric modules. But other voltages are still in use. The power supply must be chosen with extreme care, because it is crucial for the reliable functioning of all the components it supplies.
Over many years Weidmüller´s power supplies have proven themselves in the supply of power to electronic modules. They are CE certified and comply with the requirements of DIN EN 50081-1 and DIN EN 50082-2 (EN 61000-6-2 with effect from 1st April 2002). This means that they can be used in adverse industrial environments, small-scale industrial installations and also in residential areas.
|
|
PS24V8AG-110 and PS42V6AG-110
• Enclosed linear unregulated power supplies
• PC-type AC power cord
• 4 pin AMP connector on output
• Internally fused on both primary and secondary side
• Toroid transformer for minimal voltage drop and minimal EMI
Includes 1, KITDC1- connector kits
SHUNT42V100W
• Provides protection against Back EMF
• Automatically gates on at >49 VDC
• 27 Ohm 100 Watt Resistance
• Connects in parallel with above enclosed power supplies
• Pin-out is same as enclosed power supplies
• Dimensions are same as enclosed power supplies
The SHUNT42V100W can be inserted between the DC power supply and the SmartMotor to monitor the power voltage. If the voltage exceeds the threshold, the shunt gates on to clamp the voltage to safe level.
This is designed for the 42V supplies but it can also be used for 24V supplies.
Includes 2, KITDC1- connector kits
Use with cable CBLDC1
|
|
IDEC switching power supplies offer worldwide approvals, universal voltage inputs, fused inputs, auto-resetting overload protection and two different styles.
DIN Rail Mount
PS5R Slim Line
30W, 60W, 90W and now 120W and 240W models are available in a slimmer footprint than traditional power supplies. UL508 listed and approved for Class I Div 2 hazardous locations. The new 120W and 240W also comply with SEMI F47 sag immunity requirements.
PS5R Standard
UL508 listed switching power supplies with worldwide approvals and convenient mounting with output capacities up to 240W.
Metal Frame
PS3L
Traditional metal-frame power supplies with worldwide approvals and output capacities up to 300W with 5, 12, 24VDC versions.
|
|
|
Eaton's 3G series of Powerware rectifiers were designed to meet the growing demands of our customers. Increased power density significantly reduces CAPEX requirements and space utilization. Improvements in system flexibility include horizontal and vertical mounting (solutions for space critical applications), universal AC inputs, and a high degree of scalability for changing future requirements. The 3G series of rectifiers are based on the design architecture of the previous generation of rectifiers to maintain the characteristics of extremely high reliability in the field. Long life, efficiency, and greater power density reduce environmental impact, as well as CAPEX and OPEX concerns.
|
|
|
KSI offers cap charging power supplies tailored to meet your needs by configuring modular designs that are already very close to your exact requirements.
|
|
|
|
|
|
Absopulse Electronics designs and manufactures an extensive range of rugged, high-performance AC-DC power supplies, rectifiers and battery chargers. They are suitable for operation in industrial, mining, military, marine, railway and utility environments.
We provide cost-effective solutions for almost any input/output and mechanical configuration requirement, with output power ranging from a few watts to well over 5000W.
Our rugged, field proven AC-DC designs offer:
- AC-inputs: 85Vac to 264Vac universal, 115/230Vac or custom
- Outputs: 12Vdc, 24Vdc, 48Vdc, 125Vdc, 250Vdc or custom
- High input and/or output voltages available
- EMI filtering to meet any standards
- Immunity to shock, vibration, humidity, moisture, dust and insects on conformal coated and potted/encapsulated versions
- Operating temperatures of -40°C to +85°C available
- Power factor corrected inputs (PFC) available
- Single or three-phase designs available
- Full electronic protection
- Unit/module fail alarms (form C contacts) optional
|
|
Special power supply for drive electronics
PFC, high impulse load.
DIN rail mounting clip and heatsink option.
|
|
CSD Series Switching Power Supplies, in modular DIN case with Class 2 double isolation, 90…264Vac/100…350Vdc input.
Items with adjustable 5…15Vdc, adjustable 12…15Vdc, adjustable ±12…±15Vdc and 24Vdc output, 0.6A , 1A , 2.5A , 3A output currennt in 2 or 4 module-cases are available.
EMC compliant to Civil application standards; RoHS compliant; no grounding needed;
Short circuit, overload, over temperature, input / output overvoltage
protection. Designed for use with SELV and PELV circuitry.
|
|
|
Power supplies in modular 2- or 4-modules DIN boxes, 15, 30, 60 or 60W power, stabilized 5, 12, 15 or 24Vdc output; high efficiency, 50°C operating temperature without any performance reduction.
|
|
The Convel 41000 Series range of power supplies are designed for quick and trouble-free installation onto 35mm profile DIN rails.
With outputs ranging from 5 V to 24 V and maximum current capabilities from 100mA to 500mA, these units are ideal for most instrumentation and control systems.
Every model in the range is provided with output current foldback limiting and is fully short-circuit protected. Great attention has been taken to usability and safety. A green “supply on” LED is provided to clearly indicate the presence of power, and link selection allows the use of 110 or 230V supplies without derating.
|
|
DIN rail power supplies with high performance and compact dimensions, in linear or switching technology. For instance, the 240W/24V/10A model come with PFC, 3-phase wide range input and are only 125 x 125 x 125mm.
- DC output: 12V or 24V fixed, 12...14V, 24...27V, 48...56V adjustable
- AC input: 230V or 90..264 (wide range)
- Powers from 6W to 960W
- Linear and switching mode types
- PFC
- 3-phase variants
- Remote sense
- Power fail output
|
|
|
|
|
|
|
MTM Power GmbH, the specialist of individual power supplies, has designed a new generation of DIN rail power supplies, series HSA, for industrial application. As universal compact power supplies, they have an output power of 120 or 240 W. One of the major advantages is to increase to a maximum the readiness for operation of the system to be supplied even under difficult conditions. With dimensions of 50 x 130 x 130 mm (HSA120) and 80 x 130 x 130 mm (HSA240), they perfectly fit into cabinets only offering little space. The devices are available with output voltages of 12, 24, 36 and 48 VDC. They have a high efficiency of up to 89 %, are continuously short circuit protected and need no ground load. The output current is electronically limited in case of overload and the devices then change into constant current operation. Due to this characteristic curve and the reduction of the output voltage to 0 V at the same time, they are protected against short circuit damages and thus offer the possibility to supply loads with high inrush currents without switching-off or intermitting resp.
|
|
|
MTM Power GmbH, the specialist of individual power supplies, offers power supplies for DIN rail mounting with 15 to 75 W. These primary switched modules have been designed as universal compact power supplies with wide input ranges for worldwide applications in switching cabinets and allow an efficient, cost-saving solution for different tasks. They are vacuum encapsulated which allows the use under critical environmental conditions. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. MTM Power DIN rail power supplies comply with the Low Voltage Directives as well as the up-to-date EN standards as regards CE conformity. All devices are short circuit protected, need no ground load and are available with various modification possibilities.
|
|
|
|
|
|
RPS-30: DIN rail power supply for automation systems, in plastic cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-30:
- universal AC or DC input (full range),
- protections: short circuit, overload, overvoltage,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 100 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
RPS-120: DIN rail power supply for automation systems, in metal cover. They are designed for direct mounting on 35 mm DIN rail mount, EN 50022 (wires connection: input - 2 terminals, output - 4 terminals).
Features of RPS-120:
- AC input range selectable by switch,
- protections: short circuit, overload, overvoltage, overtemperature,
- cooling by free air convection,
- LED indicator for power on,
- 100% full load burn-in test,
- fixed switching frequency at 55 kHz,
- high efficiency and low dissipation,
- low nois and interference,
- 3 years warranty.
Compliance with EMC standards:
- EMI conduction & radiation: EN55011, EN55022 (CISPR22) Class B,
- harmonic current: EN61000-3-2,-3,
- EMS immunity: EN61000-4-2,3, 4,5,6,8,11, ENV50204, EN55024,
EN61000-6-2, EN61204-3 Heavy industry level, criteria A.
|
|
|
|
|
|
General Purpose 24 to 240W
The TCL series is a family of DIN-rail power supplies which come in ultra compact, light weight plastic housing. These products offer an economical solution for many applications in the industrial, office or residential environments. Easy snap-on mounting on DIN-rails or also wall mounting with an adaptor.
High Performance 70 to 600W
The TSP series represents a range of high performance DIN-rail power supplies with innovative and powerful features! Shock and vibration proof construction with a rugged metal case these products are designed to work reliable even under most difficult factory floor conditions. Excellent electrical specifications and high immunity against electrical disturbances makes the TSP series product the best choice to power sensitive loads in industrial process controls, machine tools or other demanding applications. A high power reserve guarantees a reliable start-up of loads with high inrush currents as i.e. motors. 14 standard models are available with tightly regulated, adjustable output voltages of 12, 24 and 48VDC and up to 25A. The power supplies are specified for industrial operating temperatures from -25°C to +70°C with convection cooling and provide also a thermal overload protection. All models feature as standard Remote ON/OFF and remote diagnostic via relay contacts or NPN output.The products come with an International safety approval package incl. ANSI/ISA 12.12.01 and
ATEX 94/9/EC certification for hazloc applications (class l, div.ll)
|
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC UPS units.
|
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
|
|
DHP Series
480W Single Output DIN Rail Mount Power Supplies
- Single phase or Three phase input versions available
- Wide range AC input with power factor correction
- Designed for Rugged Industrial Applications
- Convection cooled
- Built in signals
- Three Year Warranty
Other Lambda Solutions
- DLP 75 to 240W Single output
- DPP 15 to 100W Single output
- DSP 10-100W Single output
- DLP-PU 20A Redundancy Module
- MC/MZ 6 to 30A Single & Three Phase EMI filters
|
|
Features
- Universal AC input/Full range
- Protections:Short circuit/Over loqd/Over voltqge
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Isolation class II
- LED indicator for power on
- 100% full load burn-in test
- 3 Years warranty
|
|
The POWERTERM range of dc power supplies is specifically designed for industrial instrumentation applications. Use of carefully selected long-life components and conservative design parameters ensure increased reliability even in harsh conditions. Convenient DIN rail mounting and plug-in terminals on some models make these power supplies ideal for powering instrument panels
universal ac inputs 85-264Vac on all models
removable terminal blocks on most models for easy system maintenance
enclosed housings with protected terminals for safe mounting in serviceable areas
|
|
40A max DC UPS (battery control) module, for 24Vdc power system. Accompanied by external batteries (not included), it can back-up up to 40A of current to critical loads for a period of time dependant on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge, and the repeated Battery Test function to check the situation of external batteries, users can customize their own DC UPS system to back up critical loads and capture the status of the whole system easily.
* Battery controller for DIN Rail UPS system
* Parallel connection to DC BUS
* Suitable for 24V system up to 40A
* Can be installed on DIN Rail TS35 / 7.5 or 15
* Built-in battery test function
* Battery polarity protection
* Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge
* Cooling by free air convection
|
|
AC/DC Power Supplies up to 1000 watts
Single output
Your compact Power Supplies for DIN-Rail or wall mounting.
|
|
AC/DC Power Supplies up to 2000 watts
Single output
Your compact Power Supplies for wall mounting.
|
|
|
|
AC / DC power supplies: Voltage rectifiers, Other converters
