|
|
Absopulse's modular power systems are comprised of plug-in (Eurocard) converter and rectifier modules, and 19" and 23" shelves including motherboards and power distribution panels. These modular designs allow for easy servicing in the field.
Our modular systems offer:
- Output power up to 5kW per 19" shelf
- Almost any input/output and mechanical configuration
- N+1 redundant operation and hot-swap
- Multiple outputs
- Expandability - as power requirements increase, more modules can be added.
- Reconfiguration option
|
|
|
The MTM Power series PMA19 35 has been designed for the use in 19" racks. Due to the very slim case with only 4 TE, the PMA19 35 require very little space within the complete system. The devices have been designed as universal compact power supplies with input voltage ranges of 85...264 VAC and 80...375 VDC for worldwide application. The switching frequency is 80 kHz and they are equipped an internal fuse at the input. The nominal outputs of 5 V, 12 V, 24 V and 48 V are adjustable. Despite the compact design, the devices fulfill all common safety and EMI standards, are prepared for Class I and have a high efficiency. They are continuous short circuit and overload protected and optionally available with a power fail signal.
|
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program the 19" Euro Card with up to six different, galvanically isolated outputs with 6 or 8 TE. With the MTM Power Card of the series MPK1, an unexpected variety of possibilities can be created for 19" applications. Approx. 1.000 different power supply variations as
19" plug-in can be realised. As in a construction kit, the 19" power supplies can be individually assembled with the three basic components front plate, PCB and connector as well as the vacuum encapsulated modules of the series PMA, PMAS, PMN, PMG and PML. The MPK1 offers 2 mounting positions for PCB modules with an output power of 5 to 48 W, either with single, dual or triple outputs. The MPK2 has one mounting position for modules with an output power of 50 to 100 W and up to three outputs. With the MTM Power Card, power supply variations can be realised in seconds. If requested, a separate LED for each output can be included on the front plate. All modules with the same input voltage can be combined with each other. As customised power supplies have the same dimensions and pinning, even these can be combined with standard modules.
|
|
Open frame
- 3 or 4 output voltages
- VME bus signalling
- Fan monitoring
Power systems
- From 300 W to 1000 W output power
- (n + 1) redundancy
- Design in 3 U subrack
19"
- AC/DC switched mode power supply
- AC/DC linear control systems
- AC/DC converts
|
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC UPS units.
|
|
Features :
- 1U low profile
- 19-inch rack mounting
- Control and monitor up to 3 RCP-1000 units
- Suitable for all kinds of RCP output (12V,24V.48V)
- Digital meters for output voltage, output current, and internal temperature on front panel
- Potential meter for adjusting output voltage of RCP-1000 unit on front panel
- Relay contacts and LED indicators for AC fail, DC fail, and over temperature warning
- Removable fixing accessory
- 3 years warranty
Description : RCP-MU is the monitoring and control unit used for the RCP-1000 series rack power. It can decode the l2C signal sent by RCP series and display through digital meters or relay contact signals. RCP-MU can also turn ON/OFF or trim the output voltage of RCP-1000 remotely that make the basic control more easily.
|
|
|
|
|
|
1U low profile 19" rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and three output voltage levels that can allow 12V@180A, 24V@120A, 48V@63A to be selected as the front end power configuration. The racks can also be paralleled together (up to 3 racks) for higher wattage output applications
* Universal AC input
* Built-in 5V/0.3A auxiliary power
* Built-in active PFC function, PF>0.96
* Short circuit, over load, over voltage & over temperature protections
* Forced air cooling by built-in DC fan with fan speed control
* Low profile:1U height
* Active current sharing up to 3000W (3 units)in 19" rack
* Remote control for single unit
* Built-in remote sense function
* Output voltage trimming function
* Hot-swap operation
* Optional I C serial data bus
* AC OK & DC OK signal
* Internal ORing diode
* Option of AC Inlet or Terminal block on Rack
|
|
|
Unipower Telecom's Radian Series are hot-swappable, modular rectifiers which produce up to 1200 watts output. There are 18 different models with different output voltages and power levels. The modules are ultra-compact with power density up to 17 watts per cubic inch.
|
|
Single output 60 - 360 watts
Plug-in Power Supplies for your 19-inch application.
AC / DC POWER SUPPLY
PRIMARY SWITCHED MODE
SINGLE OUTPUT
P 60 SERIES
– 19" plug-in module
– Wide range input 90 – 264 VAC
– Mains buffering 140 ms
– Power Fail signal
– Output permanent short-circuit proof and SELV according to EN 60950
– Overvoltage protection
|
|
AC/DC Power Supplies for 19-inch
Multiple output 60 - 300 watts
Plug-in Power Supplies for your 19-inch application.
|
|
|
|
|
|
DC – UPS Systems for Safety Relevant Installations
With their modular construction, the latest DC – UPS systems in the GTLB/GTPB series from Zentro Elektrik expand the existing comprehensive range of DC – UPS systems for supplying power to safety relevant installations.
The AC/DC systems in standby parallel mode are designed for outputs
from 250 Watt up to 600 Watt and fitted with batteries at the customer’s request. Additional DC/DC converters can be added to the system if more output voltages are required.
A battery control and monitoring module allows to control the charging current and temperature control of the charge closing voltage.
Over and above this, numerous monitoring and control signals are provided via relays, LED’s or potentiometers. A signal relay, for example,
if the charging voltage fails, to switch off the battery on it reaching the closing discharge voltage, to give advance warning of reaching closing discharge voltage with an additional adjustable threshold or individual limitation of the battery charging current to prolong battery life, and
many more. LED displays and adjustable potentiometers provide for comprehensive signalling and the ability to adjust the maximum charging voltage or the defined point of battery switch-off.
|
|
FN-400-ULX, Power Supply
STANDARD FEATURES
Input 115VAC / 60Hz, 1.45 amp.
12VDC or 24VDC selectable output.
Single Class 2 Rated power limited output.
Input fuse rated @ 3.5 amp/250V.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
AC fail supervision (form C contacts).
Low battery supervision (form C contacts).
Battery presence supervision (form C contacts).
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Maximum charge current .7 amp.
Zero voltage drop when switched over to battery backup.
AC input and DC output LED indicators.
Accommodates up to two (2) 12VDC/7AH batteries.
Power supply, enclosure, cam lock and battery leads.
|
|
Features
- Patents
- Charging voltage modify:3V~160VDC
- Immediately switch to battery-powered after AC power off
- Battery low voltage protection (LVP)
Application
a. All use of the lead-acid battery as backup power supply products
b. All use of UPS function products
Standard / Din Rail Dual Purpose Details
- Accessories Mounting Guide
- RoHS Report
- ISO 9001:2000 TUV Certification
|
|
|
|
|
|
The 9130 is a fully programmable triple output DC Power Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output. Each output is fully floating and outputs can be adjusted independently or connected in series or parallel to produce higher voltages or currents. The 9130 is ideally suited for applications in Electronic Test, Production and Service, where multiple independent DC supplies are required and bench space is at a premium.
# 3 independent, fully programmable and electrically isolated outputs
# Display & adjust Voltage and Current settings for all 3 channels simultaneously
# Flexible output configuration: Operate in series or parallel tracking mode
# SCPI compatible command set. Communicate via USB interface using the included USB to TTL Serial Converter cable
# RS232 interface cable, converting from RS232 to TTL, is optional (order IT-131)
# OVP (Over Voltage) and OTP (Over Temperature) protection
# Output on/off control
# Excellent stability and regulation
# Very compact foot print (rack mountable 2U x 1/2U)
# Application Software for front panel emulation and simple test sequence generation included
# 50 memory locations for instrument state storage & recall
|
|
Our Power Supply with single to 4 channels and digital/analogue display series. Its high stability and enhanced linearity makes this regulated DC power supply significantly useful in where high performance and stable power sources are required. It is widely adopted for R&D, educational and industrial usage.
General Features:
- Single to 4 adjustable channels
- 0-30V voltage linearly adjustment
- 2 display for voltage and current
- Low noise and ripple (<1mV)
- voltage and current pre-set feature
- CV/CC mode auto change
- Full LOADING continuous operation over 16 Hrs
- Conforms to EN61010-1
|
|
Bench Top power supplies are recommended for research and laboratory use. They offer flexibility in terms of voltage range and output polarity. These are stand-alone units which all feature an output voltage display.
The PM20D and PM30D dual output supplies include a 4 digit LCD read out and low voltage (+-5V and +-12V) supplies. Lower cost versions, PM20S and PM30S offering only single polarity output are also available. All supplies in this range accept ac or dc input - referred to as universal supply input.
features :
- mains input
- output range up to 3000V
- low ripple
- positive or negative HV
- overload protected
- clear display of output voltage
- multi-turn set dial
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
|
|
|
The NEW and compact generation of AC-DC converters with universal input range for worldwide use. This small 150 W unit, is available with 5 single outputs. It’s very compact design with an ultra low profile suits very well for U1-size racks and systems. A highly effiecient (89-90%) and reliable converter for high end applications like Semiconductor-equipment, traffic-information systems, LED displays, etc. NEE –Series are safety approved acc. to UL, C-UL EN.
|
|
RS-300 Regenerative Source
The RS-300™ is a regenerative three phase AC/DC converter intended to supply constant DC link voltage to AV-300 series inverters. The unit is also able to supply a DC input to inverters of other brands. The output DC link voltage of RS-300 is kept constant within a specified range even if the inverter operates in regenerative mode and supplies the power back to the DC link. The RS-300 converter is designed for continuous operation in regenerative mode up to the full rated current of rectifier mode. This makes it possible to use a RS-300 fed inverter in applications which require continuous regeneration.
Features and Benefits:
Can feed single inverter and multiple inverter systems
Energy savings for applications which require frequent regeneration
Optional keypad programmer or standard GE Toolbox
Two choices for start-up and tuning
Windows® based GE Toolbox
Set parameters and program converter I/O, self-tune regulators, or keypad
Communication Options
|
|
ACD26
The open-frame power supplies are available in special EX-protected versions with 48 watts and triple output.
* Open-frame
* EMI-compliant Design
* Wide Range Input 85 ... 264V
* Dual Output 25.5W
* MTBF 400,000 h @ Tamb 40°C
* Outputs with Common Ground
* Savety Approvals Available
|
|
Low cost modular power solution
- Customized Power Supplies
- Universal AC Input
- Power factor Corrected
- Capable of up to 16 fully regulated and independent outputs
- Output Voltages from 1.8V - 48V
- Low Leakage Medical Options
- Input Transient Protection
- Compact Package
- International Safety Agency Approvals
Other Lambda Solutions
- Sirius 250-350W Modular
- NV 350W Modular (1U)
- Vega 450-900W Modular
|
|
GlobTek brings to power supply design and production the same skills and advantages that have made us number one customer's choice for over 25 years. Our vertical integration, highly efficient facilities, and steadfast obligation to quality and service excellence have enabled us to provide high-value custom engineered power supplies to many satisfied customers.
GlobTek engineers, designs, and manufactures both standard and customized AC-AC, AC-DC, DC-DC power supplies. Our designs fulfill power requirements ranging from 5 watts to 2 kilowatts. GlobTek's greatest advantage is our pledge to serving our customers. Recognizing your need to lower costs and get products to market faster, our team delivers your solution on time and on budget.
|
|
MyPowerSupply is MGV´s individual range for your own special solutions.
Are you currently developing a new appliance or tackling a complex application and just can´t find the right power supply?
We can develop your own special power supply with outputs ranging from 10W to 5kW, offering bespoke design at optimal cost
As a specialist in customised switch-mode power supplies with more than three decades´ expericence, we are proud to have solved every technical challenge to date. Tell us about your operating conditions – and we´ll look after the details.
Benefit from our experience in the fields of:
* Industrial plant and equipment
* Automation and robotics
* Measuring technology and optoelectronics
* Telecommunications and medical engineering
* Studio engineering and transmission systems
* Industrial computers and housing systems
* Renewable energy, incl. wind power and solar technology (photovoltaic)
|
|
|
Powersolve are able to offer modifications to standard products and full custom designs to meet specific customer requirements, consult sales office for details or fill in the Enquiry Form above.
|
|
|
|
|
|
DC – UPS Systems for Safety Relevant Installations
With their modular construction, the latest DC – UPS systems in the GTLB/GTPB series from Zentro Elektrik expand the existing comprehensive range of DC – UPS systems for supplying power to safety relevant installations.
The AC/DC systems in standby parallel mode are designed for outputs
from 250 Watt up to 600 Watt and fitted with batteries at the customer’s request. Additional DC/DC converters can be added to the system if more output voltages are required.
A battery control and monitoring module allows to control the charging current and temperature control of the charge closing voltage.
Over and above this, numerous monitoring and control signals are provided via relays, LED’s or potentiometers. A signal relay, for example,
if the charging voltage fails, to switch off the battery on it reaching the closing discharge voltage, to give advance warning of reaching closing discharge voltage with an additional adjustable threshold or individual limitation of the battery charging current to prolong battery life, and
many more. LED displays and adjustable potentiometers provide for comprehensive signalling and the ability to adjust the maximum charging voltage or the defined point of battery switch-off.
|
|
AC / DC Power Supplies
Encapsulated Power Modules
We offer the widest range of fully encapsulated AC/DC power modules in the market. There are 4 product series with more than 300 standard models from 6 to 60W for PCB-mounting, with screw terminal block ,with Faston-tabs or for DIN-rail mounting. These power supplies feature universal input 85-264VAC and are available as safety class l or class ll product. The TMT series complies also with medical safety standard IEC/UL 60601-1 and withindustrial safety standard UL508.
|
|
Daitron Ultra Low Noise AC/DC Power Supply HFS50 series can provide 50W at 5/12/24/36/48Vout options available.
In a small foot print and ultra low noise features are suitable for high end application in industry.
HFS series also has 30W type. (HFS30)
See product overview below link;
http://www.daitron.com/original_daitron/catalogs/Ultra_Low_Noise_Power_Supply_Daitron_Dec08.pdf
|
|
MCS-B Power supply 1-phase, primary switched IN: 95-265VAC OUT: 4-6V/3ADC
Input voltage: 95...265 V AC
Output voltage: 4.2...6 V DC
Current: 3 A
– stable output voltage, short-circuit and overload protected
– Wide voltage input
– touch protected acc. to (EN 60529) IP20
|
|
A wide range of power supplies for nearly every requirement.
- Powers from 80W to 12kW
- Currents from 0,4A to 300A
- Voltages from 18V to 300V (or even higher, by request)
- 19" and desktop models with 2/3/6/9HE
- Custom designs possible
- Programmable via analogue interface, USB, IEEE, RS232 or CAN
- Exchangable interface cards with LabView support
- Special version ZH with active load (2400W peak pulse power) and high voltage dynamics, as well as triggerable car start curve according DIN 40839
|
|
|
|
AC / DC power supplies: Voltage rectifiers, Other converters
