|
|
Absopulse Electronics' rugged, high performance backlight inverters for LCD displays are used in airborne, marine and land-based systems for the military and civilian sectors. They are also used for fluorescent lamps in the industrial, scientific, medical and commercial applications.
We provide backlight inverters for almost any type of fluorescent lamp.
Custom AC-input back-light inverters are also available.
Absopulse offers:
- DC-input: 12V, 24V, 28V, 48V or custom
- Output power from 1W to over 200W
- Open circuit voltage up to 3300Vrms
- Dimming ratio 2000:1 and wider
- Immunity to shock, vibration, humidity, moisture, dust and insects on potted/encapsulated versions in precision milled casings
- Operating temperature ranges including -55°C to +85°C available
- Designs for hot cathode and cold cathode lamps
- Electronic protection
|
|
|
The new SFW Series of DC-to AC inverters for CCFL backlights are designed for display applications that require high efficiency, wide range dimming and lamp current stability over a wide input range, with full RoHS compliance. They offer an extremely low profile (< 6 mm high), with wide input voltage and wide range PWM dimming.
|
|
G&M Power Plant has considerable experience in the design and manufacture of specialist industrial generators for the provision of:
- Base Load Power - (in the absence of a mains supply).
- Emergency & Standby Power - (in the event of mains supply failure).
- Peak-lopping - (a combination of base-load and emergency using the generating set to supplement the mains supply during periods of high demand in an effort to maintain lower pricing tariffs, whilst being available in the event of a mains supply failure).
Full choices of reliable, highly efficient industrial engines are used as prime movers. The generating sets, engineered for operation under all climatic conditions, can be found throughout the world in all of the above modes of operation.
|
|
|
|
|
|
The PowerHub converts power stored in your deep cycle batteries to 1800 watts of household power to operate your essential applications. It provides an affordable, high output, primary power solution for an off-grid cottage or cabin, as well as backup power for grid-connected homes when the power goes out. Setting up this power system is simple and hassle-free with built-in fuses, breakers, and cables. The PowerHub is designed to be part of a system that allows you to easily connect to and charge your batteries with solar and wind inputs, and allows for pass-through generator output or generator charging of the batteries as well. And, its advanced automatic power transfer switching ensures your essential applications keep running in your grid-connected home should the power go out.
Product Features
- Modified sine wave inverter/charger with battery box
- Designed to include a generator as part of the system; generator power can pass through the unit to the - AC outlets, and recharge the batteries
- Integrated transfer switch
- 40-amp three-stage charger
- Four AC outlets with hardwire option
- Two DC inputs for solar and/or wind connections
- Full-feature LED display for system monitoring
|
|
The switches of sources of automatic feeding and without cut aim to ensure the automatic passage of a renewable energy source (solar or wind) on source EDF and vice versa without
interruption of food for the user.
These systems are addressed to any site equipped with a means of production of renewable energy (solar panel or wind mill) which is not connected to network EDF.
Consequently, no administrative authorization is obligatory for their installation.
|
|
Combis (Inverter/Charger)
The Dakar Combi, an all-in-one power centre, is the ideal inverter for use in the solar market. Its use in a system is displayed above. The Mastervolt Mass Combi is increasingly playing a leading role in carefully designed marine electrical systems, allowing owners to get the most value for their money.
A professional inverter and advanced battery charger in one compact device, the Mass Combi employs high-frequency technology for the most vital functions. Batteries are always charged to 100% and last longer, and the 230V power supply is perfectly reliable. You won't have to worry about the quality of shore power in any port - things will always work with the Mass Combi. The Dakar Combi comes in a compact package and is the ideal inverter for use in remote locations and for solar applications.
|
|
|
|
|
|
Absopulse's rugged, single and 3-phase DC-AC inverters typically deliver sinusoidal voltage ranging from 30VA to well over 15kVA, and meet 50Hz, 60Hz or 400Hz application requirements. Our custom solutions address almost any DC/AC or AC/AC specifications.
Other products in our AC-output range include a selection of single and 3-phase frequency converters and phase converters, on-line sine-wave UPS systems, transfer switches, AC-fail alarm circuits and soft-start circuits.
Standard AC-output products with under 1kVA output power are typically housed in conduction/convection cooled, chassis-mount, vented enclosures. Systems with higher output power are available in 3U fan-cooled modules assembled in 3U or 6U chassis-mount or in 19” rack-mount format. AC-output products are also available in customer specified cases.
We provide:
- Inputs: 24Vdc, 48Vdc, 72Vdc, 110Vdc, 250Vdc or custom
- Outputs: 115Vac, 230Vac or 415Vrms at 50, 60 or 400Hz, or custom
- EMI filtering to meet any standard
- Immunity to shock, vibration, humidity, moisture, dust and insects on conformal coated or potted/encapsulated versions
- Operating temperature ranges including -40°C to +85°C available
- Single or three-phase designs available
- Full electronic protection
- Unit/module fail alarms (form C contacts) option available
- Remote shut down option on some designs
- Adjustment for output voltage and frequency available
|
|
Powerful and compact inverters for the use in cars, camping, boating and everywhere, where no 230V mains is available.
- Powers from 80VA to 2000VA
- Peak power up to 2500VA
- Input voltages: 12V, 24V, 48V
- Output 230V AC voltage (some models with pure sine)
- E-Mark approval for the use in cars
- various safety features for overload, undervoltage etc.
|
|
|
GUTOR's inverter systems WEW (1phase output) and WDW (3phase output), are based on the same concept as the PEW/PDW UPS systems. The systems basically consist of an IGBT inverter and a static, manual bypass switch. Inverter systems convert DC into AC current from a DC source mainly used in Power Plants or Telecom installations. We offer output ratings ranging from 5kVA - 220kVA and all common input and output voltages, frequencies. Higher ratings are available on request.
|
|
DC/AC Inverters
Zentro-Elektrik inverters are characterised by their high efficiency and
hard-wearing performance under load.
They come with intelligent functions included, with such features as
stand-alone and parallel switching / redundancy with external static switch / online/offline application functions / compact design / low weight/ high efficiency / high load capacity / user-programmable functions / remote monitoring via RS232 and much else besides.
|
|
|
|
|
|
Power Inverters
Power serie Inverters have been designed to be used in many applications. Amongst these applications, telecommunication systems, cooling, ventilation apparels, automation and control instruments take place. The difference of Power serie is in DC/AC inverter which has a very high efficiency. With it’s high efficiency; AC voltage in Sine wave shape can be produced via using DC source at maximum duration with lesser losses. Output transformer ensures galvanic insulation for sensible mechanismes, between the network and it’s output. Power inverters contain polarised connectors inside, to ensure full safety and to easily let the connection montage and detachment.In case of emergency, Power is endowed with static and maintenance bypass to allow the system work by removing the inverter from the circuit. With it’s small dimensions, no vibration structure,no maintenance requiring technology, Power is ideal to us efor 19 th cabin applications. Power is produced in –open frame- format to be applied in various applications. Power offers true quality and high technology via CE norms.
- 24, 48, 110 VDC input
- Input and output RFI philter
- Small and light
- Sine Output
- %90 - 91 Efficiency
- Microprocessing controlled
- Relay and Contact outputs
- Input and Output short circuit protection.Over Charge protection
- Advanced front panel functions
- 2 Years of Guarentee.
|
|
|
ERG's Smart Force™ inverters offer a wide range of solutions for electroluminescent (EL) backlit displays. Vacuum encapsulated for maximum reliability, Smart Force™ inverters actually prolong the useful life of EL lamps by automatically adjusting operating voltage and frequency as the lamp ages and changes.
|
|
|
|
|
|
General description
Robust and reliable, Aurora was designed to last up to 25 years, and features large derating criteria on all critical components. It delivers true maximum output power on a continuous basis. With this design concept we achieve peak effi ciencies of over 96%. Total current harmonic distortion, is typically less than 2% through the use of high-frequency switching techniques. Exclusive to Aurora, is its power curve in software that optimizes the wind turbine's output.
Benefits :
- PMG (Permanent Magnet Generator) Power Curve implemented in high speed MPPT
- IP65 (NEMA 4X)-The completely sealed, rugged unit can withstand the harshest environmental conditions
- High speed MPPT for real time power tracking and improved energy harvesting
- Compact size and high power density: 3600W of output power in a box just 420mm x 326mm x 141mm (16.5in x 12.8in x 5.55in)
- Front heatsink keeps the unit cleaner and more effi cient over time
- Transformerless operation for highest effi ciency-up to 96%
- Reverse polarity protection minimizes chance of damage due to incorrect wiring, only if used in conjunction with Aurora PVI-WIND-INTERFACE BOX.
- High overload capability-works up to 3600W under most ambient conditions
- True Sine Wave Output
- Anti-islanding Protection
- Certified grid connected operation according to the international standards
- LCD on the front to monitor the main parameters and display kW and kWh
- Wind interface box is optional
|
|
Features :
- 12V or 24V DC input
- Power ON-OFF switch
- Input voltage range: -15% ~ +25%
- Output voltage regulation: 10%
- Protections: Bat. Low alarm/Bat. Low shutdown/Over voltage/
- Over temp./Output short/Input polarity reverse/Over load.
- Output waveform: Modified sine wave
- Topology: Microprocessor
- Approvals: e13/ CE
- 1 year warranty
|
|
|
|
|
|
Motech FLEX-MPPTs PV inverter offer high efficiency, high reliability, light weight, and lower installation cost. With PVMate inverters, it makes grid-tied installations a simple task and that translates into lower installation cost. In addition, the features of PVMate, such as FLEX-MPPTs, high threshold for derating, master & slave mode, monitoring software, data logger, etc. have set a new bar in the industry.
Efficiency and Performance: With maximum efficiency at 96.3%, European efficiency at 95.2%, and no derating at temperature up to 55°C, Motech inverters outperformed nearly all of its competitors. In addition, the FLEX-MPPTs and master/slave mode features further enhance the performance of Motech inverter and differentiate it from the competition.
High quality product at a competitive price: Although Motech inverters are priced very competitively, however, all the systems are built and tested with the highest standards in the PV inverter business. Furthermore, the default warranty is five years, and there is an option to extend the warranty to ten years.
High reliability: Motech inverters are designed for a MTBF of over 100000 hours and more than 20 years of operation. PVMate 4600MS / 3800MS / 3300MS comply with VDE 0126-1-1, and they have built-in monitoring systems for residual current leakage.
|
|
|
NAI offers COTS and Custom DC/AC Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. Our DC/AC converters provide high power-density, low profile, high reliability, and rugged packaging. They are available in ratings up to 65 VA. All power supplies are designed with NAVMAT component derating and have integrated EMI filters per MIL-STD-461. All units are specified over their full operating temperature range at full-load conditions.
|
|
Offering superior quality true sine wave output, the Prosine 1000 and 1800 stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.
Product Features
- 1000 and 1800 watt inverters (1500 and 2900 watt surge capability)
- True sine wave AC output (crystal controlled)
- Removable LCD display can be mounted remotely for control and monitoring
- Unique DC terminals offer 180-degree connections for easy installation in tight places
- Powersave mode draws only 1.5 watts under no load
- Two year warranty
|
|
|
PSI350 Series 350 Watts, 12V, 24V or 48V DC Input, 230V AC Quasi Sine Wave Output, Optional 115V Output PSI600 Series 600 Watts, 12V, 24V or 48V DC Input, 230V AC Quasi Sine Wave Output, Optional 115V Outpu
|
|
|
|
|
|
The 9150 is a high performance linear-regulated 5.2V/60A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
* Very low ripple and noise due to linear regulation
* Excellent display resolution
* Fast transient response time (<100 µs)
* Programmable via USB and RS232 using SCPI compatible command set
* Closed case calibration
* List mode operation for increased throughput
* Very quiet due to intelligent fan speed control
* For bench use or rack mountable
* Application Software for front panel emulation and simple test sequence generation included
* Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
* Over voltage protection
* Digital Volt Meter and Milliohm Meter
|
|
|
|
|
|
The 9151 is a high performance linear-regulated 20V/27A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
* Very low ripple and noise due to linear regulation
* Excellent display resolution
* Fast transient response time (<120 µs)
* Programmable via USB and RS232 using SCPI compatible command set
* Closed case calibration
* List mode operation for increased throughput
* Very quiet due to intelligent fan speed control
* For bench use or rack mountable
* Application Software for front panel emulation and simple test sequence generation included
* Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
* Over voltage protection
* Digital Volt Meter and Milliohm Meter
|
|
Model 1762 Triple Output DC Power Supply delivers 0-60 V/0-2 A on 2 outputs and 4-6.5 V/4 A on 1 output. The 4 digit LED display offers 10mV and 1mA resolution, providing the capability to set voltage and current values more accurately and precisely compared to 3 digit displays found in most comparable power supplies. The power supply is fully overload protected and comes with a two year warranty.
Features:
* Continuously monitor voltage and current output on two 4-digit LED displays
* Connect two supplies in parallel to double the current output
* Connect two supplies in series to double the voltage output
* Constant voltage and constant current operation
* Reliable & durable
* Operate continuously at full load without overheating
* Fully overload protected
* Course and fine voltage and current controls
* Excellent regulation
* Very low ripple and noise
|
|
|
|
|
|
The 9153 is a high performance linear-regulated 60V/9A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
* Very low ripple and noise due to linear regulation
* Excellent display resolution
* Fast transient response time (<50 µs)
* Programmable via USB and RS232 using SCPI compatible command set
* Closed case calibration
* List mode operation for increased throughput
* Very quiet due to intelligent fan speed control
* For bench use or rack mountable
* Application Software for front panel emulation and simple test sequence generation included
* Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
* Over voltage protection
* Digital Volt Meter and Milliohm Meter
|
|
|
|
|
|
The 9152 is a high performance linear-regulated 30V/18A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
* Very low ripple and noise due to linear regulation
* Excellent display resolution
* Fast transient response time (<100 µs)
* Programmable via USB and RS232 using SCPI compatible command set
* Closed case calibration
* List mode operation for increased throughput
* Very quiet due to intelligent fan speed control
* For bench use or rack mountable
* Application Software for front panel emulation and simple test sequence generation included
* Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
* Over voltage protection
* Digital Volt Meter and Milliohm Meter
|
|
|
Our power supplies are used in test laboratories, service centres, research and development departments and for production quality testing. They can be supplied with isolation windings, manual or automatic controls, electronic regulators or rectifiers to provide a DC output.
|
|
|
The Model 0901 power supply is intended for use with New Focus receivers and amplifiers, but can also be used for general laboratory applications. Two of the three ±15-V outputs have microconnectors that match the cables supplied with New Focus photoreceivers and amplifiers. The third output has banana jacks for use with other laboratory equipment.
|
|
PCR-LA Series
Multifunctional AC Power Supply (CV/CF) / 5 Models
Interfaces GPIB(option) RS-232C CE marking Drivers
PCR-W/W2 Series
High Efficiency AC Power Supply (CV/CF) / 6 Models
Interfaces GPIB(option) RS-232C(option) Drivers
PCR-M Series -NEW-
Compact AC Power Supply (CV/CF) / 3 Models
Interfaces GPIB(option) RS-232C USB(option) CE marking Drivers
|
|
Macro Results for Micro Processes
Radio Frequency (RF) generators for plasma excitation are useful for a variety of sputtering and etching applications. Many critical processes can only be successfully performed with RF solutions.
RF generators, with their very high output stability, are used in manufacturing the tiniest of devices, such as semiconductors and micro components.
Listed below are the HUETTINGER generators available in the RF range.
|
|
Performance:
The CLF series generators provide stable process power up to 5 kW. The half-rack supplies operate at any fixed frequency from 20 to 50 kHz. The full- rack models can operate at any fixed frequency from 20 to 450 kHz or auto-tuned up to +/- 15% bandwidth. In many applications, the combination of auto-tune and excess power headroom will allow delivery of power to changing reactive loads without the need for mechanically tuned matching networks.
Applications:
The CLF series is designed to meet the performance demand in RF-driven plasma systems for semiconductor processing. Applications include etch, RIE, parallel plate, ICP, RF sputtering, CVD and PVD, as well as induction and dielectric heating processes in industrial systems.
|
|
Achievers for Large Areas and High Sputter Rates
Generators in the medium frequency (MF) range combine several advantages:
* Higher process stability than direct current systems,
* More cost effective than RF solutions,
* Ideal in large area sputtering processes with high coating rates,
* In dual magnetron applications, they are the building blocks for architectural glass and thin film coating systems.
As the leading manufacturer of generators for large-area coating worldwide, HUETTINGER offers the best there is in generators in the medium-frequency range.
|
|
Features:
- Displays Summary Process Data
- Closed-Loop Temperature and Time Control
- Real Time Temperature Graph
- Stores up to 15 Heating Profiles
- Statistical and Graphical Output to PC
- Process Alarms and Counters
- Remote Programming via PC
Uniflow2 is a power supply for selective hot bar soldering, heat sealing and conductive adhesive bonding applications. Utilizing pulsed heat technology, it provides targeted heating and precision temperature control for a variety of components including flex circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding of gold ribbon.
|
|
|
|
DC / AC power supplies: Linear, Inverters, Sine wave inverters, Converters...
