|
|
|
|
|
|
The B+K 1692 Switching Mode DC Power Supply provides high current output in a lightweight and compact package. It is suitable for a variety of uses, especially for powering DC operated mobile radio equipment on the bench. It provides a variable voltage output from 3V to 15V at 40A continuous operation. In addition a fixed 13.8 VDC output is also selectable by a slider switch. Switching mode power supplies have the advantage of lightweight and high efficiency when compared to traditional linear mode power supplies. The efficiency can exceed 80% under the best conditions. Advanced circuitry protects against overload and provides immunity from RFI. A bright red and green LED display provides for an accurate and highly readable indicator of settings.
Lightweight and compact
High efficiency
Current fold back circuitry with illuminated indicator prevents overloading the power supply
Over temperature protection circuitry
Over voltage protection prevents abnormal high output voltage
High RFI stability
Variable output 3V to 15V at 40A
|
|
The model 1550 is a compact 108 watt power supply delivering 1-36V and 0-3A from its main isolated output. A unique feature of the 1550 supply is the USB charging port located on the front panel allowing the user to charge a cell phone or MP3 player. Clean power and quiet operation make this power supply ideal for laboratories, work shops, and schools where bench space is limited.
# USB Charging port on front panel*
# Rear panel security loop
# Compact design
# Output On/Off control
# Large bright easy to read LCD display
# Constant voltage and constant current operation
# Overvoltage protection
*= Charging port is USB 1.1 & 2.0 compatible. It will not charge USB 2.0 only devices.
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
Linear Power Supplies – 6 watts to 288 watts
Choose from a wide array of options: single, dual or triple output; 6 watts to 288 watts. Worldwide input ranges and industry standard packages available.
|
|
Daitron Low Noise Power Supply DFS series can provide;
- Low Noise
- High Efficiency
- Small Foot Print
- RoHS free
This product is suitable for Engineers who need low noise feature even in a small foot print and light weight required in their applications.
http://www.daitron.com/original_daitron/index.htm
|
|
|
BBS-Series, an ultra compact 300W switchmode power supply, for space critical applications. The fanless concept is well suited for noise-free installations such as high quality servers, routers,LED displays, etc. A great product for lesser money, space and temperature sensible designs.
|
|
ISP Power
Compact High Output Switch Mode Power Supply
The ISP200 and ISP300 Power Supplies were specially designed to provide high-performance power to inductive loads, such as stepping motors and DC servo motors.
With built-in short circuit, over temperature and over voltage protection, they absorb and modulate inductive current surges and rapid changes in power for more even output power and increased performance.
|
|
25 Watt Single and Multiple Output
Features:
- 3.6”x 2.48” Footprint
- Low Cost
- Low Profile fits 1U Height Requirement
- Over Voltage and Short Circuit Protection
- Class B Conducted EMI
Applications:
- Networking
- Peripherals and Terminals
- Compact Equipment
- Microcomputers
Mechanical Characteristics:
- Length: 91.5mm (3.6inch)
- Height: 29mm (1.14in)
- Width: 63mm (2.48inch)
- Weight: 150gm (5.33oz.)
|
|
EASYMOD OPEN-FRAME SWITCHERS - 40W to 350W
AC INPUT & DC INPUT AVAILABLE
INDUSTRIAL, TELECOM & MEDICAL APPROVED
IF YOU CAN NEVER GET WHAT YOU WANT IN A SWITCHING POWER SUPPLY, the POWER SOLUTION for up to 350 watts steady state of high reliability, Universal AC input and DC input power can be found in the EASYMODfamily of switchers. These units are available in a complete range of single to quad output configurations from 1.5 to >48 VDC with power ratings from 40W to 350W.
Any Output Voltage from 1.5V to 48VDC
AC Input and DC Input Models
Approvals to cUL60950-1, EN60950-1 CB
Medical Approvals to cUL60601-1, EN60601-1 CB
Single and Multiple Output
|
|
• Energy Star, CEC & EISA Compliant
• ITE Approvals
• PCB Mount
• Class II Construction
• Compact Dimensions
• EN55022 Class B Emissions
• Low Cost
|
|
|
|
|
|
General
The models of series EA-PS 800 19” are available as sin-
gle, dual or triple output power-supplies. By combining the
synchronised-rectifer and semi-resonant converter princip-
le, an effciency of up to 92% is achieved, thus making them
highly effcient and extremely reliable as a result.
Output
A choice of output voltages between 3.3V, 5V, 12-15V and
24V at power levels of 80W, 150W and 240W are available.
All outputs, main and supplementary, are provided with a
static current limit and a power limit circuit and are stabilised
independently, making them truly zero-load compatible,
fully short-circuit- and overload-proof.
All output voltages can be trimmed within a specifc range
by potentiometers located in the front panel to accommo-
date sensitive loads, and are visualised via LEDs.
The integrated OVP protects the equipment connected
from DC overvoltage damage.
Input
A wide input range of 90 up to 264 V AC (90…360 V DC)
with active PFC (power factor correction) makes them
suitable for a worldwide usage or as isolated DC/DC con-
verters as well.
Remote sense
The remote sensing circuit located at the H15 connector
can be connected to the input terminals of the load in order
to compensate for the voltage loss across the main output
wires, ensuring a stable and precise voltage to sensitive
equipment connected.
|
|
|
|
|
|
Features:
54 Models: 5 to 1000 Vdc, 3 to 900 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz and 60 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics PQ SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. PQ SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
|
|
|
|
80 Models: 16 to 1000 Vdc, 20 to 2700 Adc
FEATURES:
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics TS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. TS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
1U High, Up to 450 Watts with PFC and Hot-Swap Provision
FEATURES
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap Operation
- 12, 24 or 48VDC Outputs
- I2C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 5.6 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Engagement
- ORing Diodes on Output
- 1U, 19" Racks Hold 2 or 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- Front-End Switcher - PCG & TPCG
- SEMI F47 Compliant at Hi-Line
|
|
39 Models ranging from 16 to 2500 Vdc to 40 to 7500 Adc
• Series and parallel master/slave operation
• High dielectric withstand: 2500 Vac
• All user interface circuitry referenced to earth ground
• OVT and OCT shutdown standard
• Automatic V/I crossover
• RS232 interface with SCPI commands
• Optional IEEE-488, RS485, and Ethernet programming
• Front panel potentiometers for stepless rotary control
• Front panel keypad and up/down control for digital control
• 100 memory states with front panel memory indicator
• Auto sequencing by time or external triggering
• Modulation with addition or multiplication
• Front panel calibration
• User friendly controls and indicators
• Remote Interface Software with self-teaching features
• Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
• High power factor
|
|
|
|
|
|
80 Models: 16 to 1000 Vdc, 20 to 4500 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics MS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. MS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
|
With efficient, state-of-the-art serial switchmode rectifier technology and streamlined system control and monitoring, the high performance GPS 4848/100 is the first choice to meet the demanding dc power requirements of large central office applications. This 48V Power System provides output capacities from up to 3080A in a single cabinet, to 14,000A with up to 64 200A/220A rectifiers in an integrated, multi-cabinet configuration, using either centralized or distributed system architectures. Available configurations operate on commercial 208 to 240, or 380 to 480Vac, three-phase, 50 or 60Hz, and provide the wide range of ac input, and dc output distribution options available for GPS systems. The system also incorporates the detailed system status monitoring and flexible control of the full-feature Galaxy Millennium II or the Galaxy SC Controller.
|
|
|
Power supplies: stabilized power supplies, food with cutting, food industrial, rectified food filtered, food rail DIN, food to measure, food hooded, etc
|
|
|
REO build a range of variable output DC power supplies that operate on the switch mode principle. The variable output is produced by high speed switching of the mains supply, after rectification, using IGBT's and controlling the mark space ratio. The DC level is reduced to the required output range by employing REO high-frequency transformers. Smoothing components, also manufactured by REO, are used to give a steady, ripple free DC supply.
|
|
- Universal Input 85-264 AC, 120-370 DC
- Short Circuit Protection
- Over current protection
- Over heating protection
- Over charge protection
- Output Led Display
- EMC standarts compatible
- CE, UL agreement
- Small dimensions
- 2 years guarantee
|
|
GSA TOP- Features
The new series of switching power supply called " GSA TOP " represents a valid and reliable solution to the requirements in power of the modern industrial groups. Characterized from a three phase input with absolute voltages up to 600VAC, it is offered with 24VDC output and five different output currents. Series GSA TOP meets the EN55011 cl. A and the EN 61000-3-2 requirements. The parallel operation and the connection of the negative to mass are allowed .
|
|
|
|
|
|
Safety and reliability continue to gain increased importance in many industrial applications. The family of power supplies offers several solutions to increase the reliability and safety of the application. The N+1 redundancy modules provide a cost effective means for providing back-up power in the event the primary power supply fails. The "Buffer" module provides added reliability for conditions of "Brown-out" when input power is unreliable. The comprehensive line of Switched Mode Power Supplies accepts wide ranges of both AC and DC input voltages and has global certifications to meet worldwide single-phase and 3-phase application requirements. The line of Allen-Bradley Power Supplies has two distinct families the standard and Compact that are essential components for complete low voltage control solutions.
- Reliable Design
- Leading Edge Technology
- Reserve Power and Load Response
- Parallel Connection Compatible
The Allen-Bradley Bulletin 1497 Global Control Circuit Transformers from Rockwell Automation are designed to reduce supply voltages to machine tool control circuits, providing greater safety to operators. These transformers also isolate the control circuits from power and lighting circuits. They are especially designed to accommodate the momentary current inrush caused when electromagnetic components are energized, without sacrificing secondary voltage stability per NEMA ICS2-100.
|
|
Features:
- UL-recognition (in preparation) marking for worldwide
applications.
- Designed for power ratings from 120 to 960 W.
|
|
Regulated switch mode power supplies from 0.3 to 40 A for industrial applications
Description
Modular and optimum power supplies for networks single-phase 100-240 V
Output voltage: 5, 12, 24, 48 V -7 W-145 W
Highly compact sizev
Wide voltage range
Fixing by screw or on omega rail
Universal power supplies, for networks single/3-phase 100-500 V
Output voltage: 24 V and 5 to 15 V by converter modules 48 V/72 W-960 W
Integrated energy reserve
6 product references from 3 A to 40 A
Fixing on omega rail
Advanced diagnostics by LED and relay contact
Integrated anti-harmonics filter
Function modules to respond to problems of network cuts, 24 VDC circuit overloads and availability
|
|
| ... products without technical information |
| |
|
|
Switch-mode AC / DC power supplies
