|
|
AC-DC Power converter
Advantages
Power converter, supplies DC-standards fans from AC power
Parallel use of several fans possible
Idle- and short circuit protected
Protective insulation conforms to VDE
Attractive and practical design
Features
Input voltage 198 … 154VAC
Output voltage 12VDC ±5% (5VDC and 24VDC optional)
Max current 1A
Efficiency >90%
Operating temperature range from -10 up to +85°C
|
|
Wall plug adapter
- Safety transformers
- Power max: Dc 6 VA
- Inlet with plug EUR,USA, UK, JPN, AUS
|
|
Desktop Switching power supply
Electrical caracteristics:
- Universal input: 90-264 Vac
- Single input: 230 Vac
- Frequency: 47.63 hz
- Output: Single or multiple voltage
- Efficiency > 70 %
- Working temperature: 0-40 C
- Storage Temperature: 0-70 C
|
|
Features :
- Universal AC input / Full range
- No load power consumption<0.3W
- Pass energy star level (CEC) for full series
- Meet energy star level (CEC) for full series
- Meet EISA 2007(Energy Independence and Security Act)
- 3 pole AC inlet IEC320-C14
- Class power ( with earth pin)
- Protections: Short circuit / Overload / Over voltage
- Fully enclosed plastic case
- LED indicator for power on
- Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE
- Pass LPS for full series
- 2 years warranty
|
|
95510255 - RID-LPX Power Supply
The low power supply RID-LPX is a stand-alone unit to support the RID 512 and RID 1640 detectors with four different voltages. The power supply supports 230 V ±10% at 50 Hz and 115 V ±10% at 60 Hz and 50 Hz respectively. Three lights at the backside are showing the status of the three voltages.
Even though the industrial grade RID-LPX power supply is well suited for the requirements of the RID 512 as well as the RID 1640 series of detectors, it is strongly recommended to use the medical grade RID-EP power supply for the RID 1620 and 1640 ES series as well as for all applications requiring medical grade approval.
|
|
4 Watt Flip-Plug Compact Adapter
Features:
- No Load Power Consumption < 0.5 Watt
- Low Leakage Current
- Flip Plug Design
- Low Cost
- EISA Compliant
Applications
- Wireless Communications
- Portable Equipment
- Peripherals
- PDA
Safety Approvals
- cUL/UL
Mechanical Characteristics
- Length: 69.4mm (2.73in)
- Height: 25mm (0.98in)
- Width: 48mm (1.89in)
- Weight: 145g (5.12oz)
|
|
* Universal input 90 ~ 264V AC
* Over load, short circuit protection. Auto recovery start up.
* AC inlet IEC 320~C14
* With LED indicator
* UL, cUL, TUV, CB, CE approved
|
|
A compact Wall Mount Switchmode AC-DC Adapter designed for worldwide applications. Featuring over voltage, short cirsuit and open circuit protections and UL/cUL, CE & TUV safety approvals. The interchangeable AC plugs make the EA1015-AR Series ideal for portable applications that target the consumer market such as MP3 players, mobile phones etc. and for corporate appications that target the worldwide market, such as POS.
* Universal AC input 90 to 264V AC
* Low ripple noise
* Output voltage available from 3V to 5VDC, maximum 2.5A
* Over voltage, short circuit protections
* Safety: UL/CUL,CE,TUV,DoIR, C-Tick
* EMI/EMC: FCC part 15 class B and EN 55022 class B
* AC plugs: USA,TUV,UK,SAA PIN
|
|
PPT10 Series 10 Watts, Single Output, Interchangeable AC Input Plug, Flying Lead Ouput
PPT15 Series, 15 Watts, Single Output, Interchangeable AC Input Plug, Flying Lead Output
|
|
Daitron DLS100 series Low Noise Power Supply features;
- Low Ripple Noise : 30mV typ
- RoHS free
- Small Foot Print
- High Efficiency : 77/82%
- UL file #: E237238
- Standard off-the-shelf products
|
|
JWS Series
- High quality industrial power supplies
- 50-600W
- Five year warranty
- Universal AC Input with PFC
- Optional Din Rail Mounting
- Input Transient Protection to VDE0160
- Output Adjustment
- 200% Peak Power on (JWS-P models)
- UL508 approval (JWS/508 models)
Other Lambda Solutions
- HWS 15 to 1500W, Single Output
- JFS 500 to 2000W, Single Output
- ZWS Low Cost 5-150W
- LW Low Profile Dual & Triple Output
|
|
Fan-less power supplies for computer systems ATX and U1 form factors
Redundant power supplies
Fan, convection and water cooled
Chargers
Standard and custom products
Made in Germany
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
Low Power Switchers – Up to 250 watts
The switch mode power supplies in this category span a large power range – from 7 watts to 250 watts. Many models available in open frame, rack mount or enclosed. Most product families are available for commercial and medical applications. Most families conform to industry standard footprints to optimize size and space constraints.
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
PSM500 500W 1U RPS and Bulk n+1 Power Supply with active PFC
Features:
- SELV Output with 1500VAC Isolation
- Diagnostics
- 500 Watts X 3 in 1U 19” Rack
- Full Protection OTP, OCP, OVP
- Hot Plug N+1
- 85-265VAC with Active PFC
Applications:
- Power Over Ethernet
- Network Redundant Power Source
- Telecommunications
- Servers
Safety Approvals:
- cUL/UL
- TUV
- CE
Mechanical Characteristics:
- Length: 300mm (11.81in)
- Height: 41mm (1.61in)
- Width: 107mm (4.21in)
- Weight: 1.81kg (4lb.)
|
|
Compact PCI : 175-350 WATT SWITCHERS
FEATURES
* Standard Compact PCI Outputs
* Outputs; 5, 3.3, ±12VDC
* Hot-Swap, N+1 Redundant Operation
* AC or DC Input
* Integral LED Status Indicators
* up to 6.8 Watts/Cubic Inch Power Density
* Power Factor Corrected (AC Input)
* Standard 47 Pin PICMG Connector
* ORing Diodes on All Outputs
* Active Current Sharing on V1, V2 & V3
* Class B EMI Input Filter
* Universal 90 to 264VAC Input
* Wide Range 36 to 72 VDC Input
* Complies with PICMG Specifications
* Control & Monitoring Features
|
|
19-inch CompactPCI Switch-mode Power Supplies
Multiple Output 75 - 200 watts
High performance CPCI-Power Supplies for your application.
|
|
1U PSU
Model ORION-A1501
150W 1U ATX power supply with active PFC
Model ORION-A4001
400W 1U ATX power supply with active PFC
2U PSU
Model ORION-B4001
400W 2U ATX power supply with active PFC
Model ORION-B3501P
300W 2U ATX power supply with active PFC
PS/2 PSU
Model ORION-D5601P
560W PS/2 ATX power supply with active PFC
Model ORION-D3501P
350W ATX power supply with active PFC
|
|
|
|
|
|
Application
The switch-mode power supplies are powerful and robust devices to power sensitive loads in a hard industrial environment. These features result from the modern construction with a good radio shielding and high reliability integrated in a functional and stable casing. The short circuit proof output DC voltage of this type can be adjusted. This power supply is optimally suited for loads requiring high starting currents.
Product information
Switch-mode controller with low residual ripple
Overload- and open circuit protected
Short circuit proof
Output separated according to VDE 0551
Smoothed output
Operating status shown by LED
Parallel connection possible
Suitable for the tropics - epoxy resin casted
Safety acc. to VDE, EN, UL, CSA
Technical data
Input voltage (VAC): 85 ... 270 / 320 ... 550 VAC
Input voltage (VDC): 120 ... 400 / 450 ... 780 VDC
Output voltage: 5 ... 130 VDC
Output current: 0,5 ... 50,0 A
Power: 12 ... 1200 Watt
Operating temperature range: -40°C / +80°C
Mounting: on rails acc. to DIN 46277 or wall mounting with screws
|
|
*Compact size, High quality, Competitive price
*Universal input power source
*Able to drive various controllers
*Built-in over current protection circuit
*DIN rail mounting and mountable without the rail
|
|
PS-30-12:Switching power supply PS, 12V DC
* stabilized switching power supply
* to supply control machines, alarm systems, to be used in measuring and regulation.
* galvanically separated from the main
* PS-30-12: fi xed output voltage DC 12 V, stabilized 30 W
* PS-30-24: fixed output voltage 24 V DC, stabilized 30 W
* PS-R: output voltage: DC 12 - 24 V regulated, stabilized 30 W
* when short-circuit-output is disconnected
* exceeded limit values ( temperature , current) is indicated by red LED and output is disconnected
* output current is limited by an electronic fuse
* input voltage: AC 230 V
* 3-MODULE, DIN rail mounting
|
|
|
|
|
|
Switched-mode power supplies SN3 - the ideal power supplier for your 24 V DC PLCs
The switched-mode power supply unit is indispensable in the fields of power engineering and automation. The technology features a high efficiency and the development of heat and power losses are thus kept to a minimum.
The wide input voltage range which accepts both AC and DC power supplies guarantees world-wide use, even with fluctuating power networks and battery operated systems.
The new devices feature integrated performance reserves of up to 50 %; which avoid the necessity for over-dimensioning with high starting loads. They are also no-load and overload protected and feature permanent short-circuit proofing.
Devices with adjustable output voltage, e.g. for compensation of voltage drops on long cable lengths enable matching to the demands of different applications.
An additional annunciation module which can be retrofitted with a remote function for external switch on and off, as well as a relay output for indicating that the input/output is ok, optimise the monitoring features of the control.
|
|
Features
- Output Modify Range:3V~200VDC
- Redundant Function (HOT SWAP)
- Alarm Signal (RDY) Exposition Details
- RDY Signal Wirigin Diagram Circuit
- Standard / Din Rail Dual Purpose Details
- Accessories Mounting Guide
- RoHS Report
- ISO 9001:2000 TUV Certification
- Part Number Rule
- Split rail, Series, and Parallel, Redundant use, and Remote sensor connection circuit
|
|
Features:
- Standard/ DIN Rail Mounting Dual purpose
- Convection Cooled
- input/ output LED indicator
- 100% burn in test
- MOSFET designed
- 1 yar warranty
|
|
|
The successful PowerVision range has been extended. From the 4th quarter, you will also receive single-phase stabilised switch mode power supplies with a rated output current of 2.5, 5, 10 and 20 A respectively. The three-phase economy switch mode power supplies can now also be supplied with isolated DC OK signal output and active inrush current limiting as an option. The range of uninterruptible power supplies has also been extended with a buffer module and an accumulator module.
|
|
|
The PAM Series consists of large-capacity, variable-switching DC power supplies based on the seemingly incompatible design concepts of high quality and good cost performance. This Series offers large-capacity power devices to limit temperature rise, minimizing temperature dependence and improving reliability. Models in this Series also offer a TP-BUS-based digital communication function and can be configured for a power supply system of up to 434 channels in combination with power supply controllers in the PIA4800 Series. The PAM Series products are suitable for power sources such as burn-in and aging equipment.
|
|
|
|
|
|
# The VSP Power Supply series utilizes modern switch mode technology to produce high-power, low-noise switching supplies that cost around twenty five percent less than linear supplies with the same power. The VSP series offers as much as 1.2 kilowatts in a 19 inch rack mountable chassis that measures just 1U (1.75 inches) in height. The VSP series power supplies can provide precise output voltage control via manual tuning utilizing front panel mounted ten-turn potentiometers or by remote control from an RS 232 interface (provided on standard VSP models) or by GPIB interface (add "GPIB" to the model number for a VSP with GPIB interface instead of RS 232). All models have remote sensing capabilities to automatically maintain desired voltage levels at the load. Provides 1.2 kilowatts at 20V, 40V, 60V and 120V output voltages (output voltages vary between different models)
# Compact 1U (1.75 in by 19 inch rack mountable chassis) is just a home on a bench as it is in a Rack
# Up to nine units can be cascaded, producing more than 10 kilowatts of DC power
# Front-to-back air flow allows full power operation without space between supplies
# Output on/off switch on front of unit
# RS 232 interface
|
|
Switching Power Supplies
Delta's switching power supplies provide power ranging up to 7,200W+ per power module, with efficiency of over 90% and power density of up to 25W/inch3. These products are modular, redundant, hot swappable, and provide universal input power systems for high reliability. Delta offers custom design and high volume manufacturing capability of power supplies for PCs, servers, workstations, networking, peripherals and office equipment.
Delta's switching power supplies use state-of-the-art circuits and advanced packaging technologies such as ASIC, hybrid circuits, and thin film to achieve high efficiencies and power densities.
|
|
|
|
Switch-mode AC / DC power supplies
