|
|
| Products 121 to 150 of 309 |
Junction boxes, cabinets and control stations for increased and intrinsic safety EEx e / ed / ia /eia / deia.
Aluminium, polyester and stainless steel (316L). Boxes assembling.
|
|
|
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our own facility, Pepperl+Fuchs is able to offer its world-class products in a variety of panels and enclosures designed and built according to your specifications.
|
|
Junction boxes are used for carrying and distributing electrical power in hazardous areas. They are supplied in different sizes with and without small equipment fuse, and are therefore suitable not only as pure connection and distribution boxes, but also for protecting electrical loads up to 6,3 A. Cable glands in plastic are used as standard cable entries. Bell-mouthed or metal glands can be fitted if ordered. The metal cable entries are connected to the earthing system via brass plates.
Explosion protection to CENELEC, IEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin
Degree of protection IP 66
|
|
R. STAHL supplies explosion protected terminal boxes in various versions and sizes, as individual enclosures or as terminal box combinations, presented in ecnclosure series.
8118:
glass fibre-rinforced polyester resin, in 3 basic enclosure sizes
8146:
glass fibre-reinforced polyester resin, in 8 basic enclosure sizes and various heights
8125:
painted steel plate or stainless steel, in 6 basic enclosure sizes and various heights
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2
Terminals fitted to order
Cable entry mounting to order
Degree of protection IP 66
Specialised knowledge is required for designing and construction of explosion protected electrical engineering, it is vital to observe the explosion protection regulations. R. STAHL is experts in this subject! R. STAHL design and manufacture explosion protected terminals to order and to customer specifications taking into account all relevant regulations and standards.
|
|
The robust junction boxes made of plastic stainless steel and light alloy are featured by their friendly mounting and installation capability and their design.
They are fitted with pillar terminals for cable of up to 6 mm2. The practical orientated housing form allows for a problem-free access to the connection
terminals for installation.
|
|
As practised by automation engineers for some time, the trend in engineering and plant construction is strongly towards the supply of complete systems. Drawing on several decades of experience, INTERTEC does not have to reinvent the wheel for every new project. Access to an intelligent modular concept allows industrial quality at low costs.
SAFE LINK - A Convincing System
• Enormously reduced engineering costs
• Low material procurement costs
• Pre-installed hook-ups save time and costs at the site
• Sensible standardization reduces the variation in range of instrument installations and saves storage costs
• Field-proven and practice-proven solutions for traditional installations and innovative direct mounting
• High measuring accuracy resulting from short impulse lines
|
|
INTERTEC cabinets and shelters are designed as sandwich constructions with inner and outer skins made from very strong GRP skins - or other materials such as aluminium sheet or stainless steel - and a core of closed cell light weight and insulating PU foam. This construction ensures high strength and rigidity and is unaffected by environmental influences.
The design spectrum covers nearly every application case, from an insulated cable distribution cabinet through Analyser House or Radar Equipment Shelter to a complete - even multi-storey - utility building with attached office. Whether in aggressive industrial atmosphere or extreme environmental conditions of the arctic or the desert - there are nearly no limits.
|
|
These case are ideal for hand held instrument and a tilting bail is supplied .
With and without battery comparment externally.
The top and bottom parts incorparate a tongue and groove sealing system which accept gasketing .The gasket is available as a separate item.
A durable and proeessional moulded tilting bail is available which also can be used to wall mount the enclosures.
Colour :cream-colored
Material :ABS
|
|
|
|
|
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole
|
|
The new hand-held enclosure system for data acquisition and instrumentation in mobile applications.
Mountable components:
Chip card/magnetic readers, scanners, PCMCIA-interfaces, displays, membrane keypads, switching mat sets, plug connectors, socket connectors etc.
|
|
|
Cases plastic: various materials: polystirene, polycarbonate reinforced glass fibers, dimensions of 50x52x35mm with 361x254x165mm, sealing IP66, full or transparent lid, boxes with buttons plastic, cases electric plastic, boxes distribution plastic, joint boxes cable plastic, self-extinguishing, high impact resistance and to the chemicals
|
|
CAB
CAB wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are produced with hinged covers. Transparent cover options allow easy viewing of installed equipment and indicators. Glass fibre reinforced polyester cabinets are also available.
Dimensions of CAB PC/ABS range from 150*150*110 mm to 600*400*220 mm. Dimensions of CAB P range from 315*215*170 mm to 1030*835*300 mm.
PC: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL-94 5V; UL 508
ABS: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
P: IP 66; IK 10, T:IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V
|
|
- Resistant to high-pressure cleaning
(protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening
- Suitable for clean room use.
Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws,
internal with plastic stoppers.
- Optimum EMC conditions.
The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
- Accessibility.
Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view.
- Wall mounting can be implemented directly from the rear using M8 pull-in nuts, or from the front using wall mounting brackets.
|
|
-Placing keypad or logo sticker on screw cover type
1. It can be placed keypad or logo sticker on the cover.
2. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
3. Available 18 kinds sizes from 80x130x35 mm to 180x255x125 mm
4. selectable gray cover or clear cover
5. Available stainless steel wall mounting bracket
|
|
|
Two new ranges of connection boxes for electrical installations are available in 6 different sizes. Manufactured in thermo-plastic, shock-resistant and self-extinguishing material, Series CUBIK boxes are weather-proof and ideal for housing small equipment.
|
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
Junction box
MATERIAL Tecnopolymer
COLOR Gray RAL 7035
QUALITY MARKS IMQ
STANDARDS CEI 23-48
IEC 670
IMPACT RESISTENCE 6J at -15C
USAGE TEMPERATURE From -15C up to +60C
|
|
modularity
consistent dimensional range, graduated and logical, enabling fast and adapted selection; precise correspondence of boxes means perfect alignment
MUREVA family
the junction box is at the heart of the MUREVA family, now comprising
enclosures, junction boxes and equipment
infallible
the patented mixed EVA/stepped entry enables direct entry of cables.
Cables and tubes are tightly retained for total sealing.
|
|
Application
This enclosure provides the convenience of quarter-turn latching with an aesthetic, easy-to-maintain light gray textured finish.
Features
- Quarter-turn latch with screw-driver slot for easy access
- Seamless foam-in-place gasket
- Weldnuts provided for mounting optional panels and terminal block kits in size 6.00 x 4.00 in. (152 x 102 mm) and larger
- Quarter-turn latch(es) on cover capture(s) internal catch(es)
|
|
Helio Box junction boxes for protecting photovoltaic installations are designed to protect between 4 and 12 strings in parallel.
These junction boxes are IP55 according to the IEC 60529 Standard. They are fitted with Helio Fuse dedicated to blow under the vvery low fault currents encountered in such applications. Helio Fuses are hold in fuse-disconnector. Surge Trap protecting against overvoltages fit also the Helio Box.
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 20 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B.or DIN rail mounted terminal
The lid is hinged with the bases, and closed by easy lock
Replacement of solid lid by transparent lid for 20C series
Custom material and color available (Bone as standard color)
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
METALLIC DISTRIBUTION SWITCHBOARDS
ATLANTIC Series of metal distribution cabinets have been developed and designed to fulfill an efficient and safe electrical installation where both, technical and aesthetic aspects are demanded.
Easy handling and improved working space are due to their flexibility and reduced number of fixing components, therefore these cabinets are an excellent tool for any type of low voltage-electrical installation.
They are available in different versions depending on use and installation requirements: Surface or flush-fit mounting, watertight enclosures...
This new line of products is well complemented with a serie of accessories providing to the installer versatility and integral solutions to their needs.
|
|
|
Mechanical parts (punched, bended, stamped, pressed, turned, deep-drawn ...) and assembly components for switchgears such as spindles, spindle-nuts, handles, axis, pins, draw-out units, earthing switches, disconnectors, load break switches, oil dampers, interlock mechanisms and complete operating mechanisms box for vacuum circuit breakers ...
|
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
PICCOLO range is especially designed to house push buttons, terminal blocks, motor starters and electronic devices. They are also ideal for mounting and protecting process control sensors and switches. PICCOLO range is available in polycarbonate and ABS.
Dimensions range from 110*80*65 mm to 230*140*125 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4X, 6, 6P, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 6, 6P, 12 and 13; UL 94 HB
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
|
|
MCE - Modular Component Enclosures offer easy-to-use and practical functionality, and are designed to house din rail mounted automation, control and switch gear components. MCE enclosures can be connected to each other with flange openings to build bigger panels. Cable entries are available in all sides. There are 5, 9, 14, 28 and 42 module options available as stock products. Bigger sizes available upon request.
PC: (MCE Control) IP 65; IK 08; UL-94 5V; UL 508
|
|
|
The PROLINE Modular Enclosure systems are designed to protect electrical and electronic equipment in industrial, local area networking, and telecommunications applications.
|
|
|
|
Cabinets, Boxes, Cases
