|
|
| Products 151 to 180 of 309 |
|
|
|
|
Modular design
The Bernstein light control housing CC-3000 is especially suitable for
mounting display components or control elements, (HMI's, IPC's etc). Its
height and width are variable up to a maximum recommended size of
approx. 600 x 600 mm. Various combinations of the 55, 120 and 200 mm
wide aluminium profiles give the housing several depth possibilities.
Customer-specific housing
The light control housings CC-3000 are supplied from the factory as standard housings or as custom-built versions. The modular concept is superbly suited for customer-specific solutions. The aluminium profiles are simply cut to length and assembled with the corner modules to create various sizes. The basic housing profile sizes can be combined with each other to achieve the required housing depth.
Besides the dimensions, many other housing properties are selectable in customer-specific configuration, e.g.: the hinged side of the door
the housing configuration for suspension systems the colour of the corner modules.
The front panel is also available ready for use: machined to customer's specifications, screen printed or engraved. A checklist helps to define the required housing configuration and at the same time serves
as an enquiry and order form.
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
|
|
|
|
Areta Multiple doors
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
Areta modular
Using the structure of a standard Areta cabinet it is possible to create modular internal systems for the LV Power distribution.
Specific mounting kits allow the fitting out of:
- Inner front with panels or doors including locking system with no extractable screw.
- Split cubicles adjustable in depth according to the different dimension of the devices to be installed.
The Areta modularity together with a special union system make possible the joining of different modules.
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
|
|
- Control housings from aluminum
- Support arm systems
- Control housings from steel sheet with the series "BAE" and "BAV"
|
|
Simplify your next operator interface project with a STRONGARM mounting and enclosure combination.
Enclosures are designed to your exact terminal specifications; including the cut-out, cable space, drive access and cooling requirements. Specify pushbutton cut-outs and other extras to complete the ideal, hassle-free enclosure to complement your STRONGARM mounting. Enclosures are specially reinforced for pendant arm mounting to assure solid, wobble-free operation.
Features:
Operator "friendly" interface
Compact and repositionable including three levels of vertical travel (13", 23", 30")
Internal, local, or remote PC (Internal MicroBox PCs available from STRONGARM)
Multiple keyboard and pointer selections (including STRONGARM's revolutionary Stainless Steel Mouse)
Feature panel for easy pushbutton additions
Post Mount, Machine Top Mount, Wall Mount and Ceiling Mount available
Horizontal and vertical extension capabilities
|
|
HMI Enclosure Series. Functionality and versatility are found in the HMI Series. From standard "off the shelf" designs to al stainless steel construction, the HMI Series provide solutions to a wide variety of applications. Some of the features include:
- Powder Coated OR Stainless Steel Construction.
- Multiple Mounting Options
- Configurable Cable Connections
- Gasketed Doors and Openings
|
|
CC3000 Operator Interface Enclosures
CC3000 Accessory Mounting Brackets
CC3000 Clipboard
CC3000 Command Handle
CC3000 Door Stop Kit
CC3000 Fan Mounting Bracket Kit
CC3000 Keyboard Connector
CC3000 Keyboard Drawer
CC3000 Keyboard Front Plate
CC3000 Keyboard Straps
CC3000 Mouse Pad
CC3000 Pedestal
CC3000 Spring Nut Fastener Package
CC3000 USB Interface
|
|
|
|
|
|
Outdoor cabinet of stainless steel Aisi 304 (En 14301), robust, developed and devised for use outdoors, monobloc structure, with embedded door of 2mm, triple action vandalproof rotating handle and officially approved water repellent seal tight joint, Ce, UL.
Our outdoor cabinet, with its design, finish and seal tightness, is specially suited to urban equipment (public lighting, auxiliary railway line services), and to reliably house the protection of electrical and electronic equipment in the railway sector, urban cabinets and telecommunications (ICT), TV, RDSI, RT, TB, TLCA.
The monobloc design of the outdoor cabinet allows IP 65 seal tightness and IK10 maximum possible resistance. A self-ventilating overhead cover and optional base can be included. With high resistance in the embedded doors, it is designed to be fully vandalproof.
Our outdoor cabinet replaces concrete cabinets which are heavy, cumbersome and offer a lower level of seal tightness.
Built in line with EC regulations. Certified UL 50, Nema 4x.
Flexibility in dimensions,and design.
Automatic evacuation of condensation.
With vandalproof handle included, preventing forced openings.
Maintenance free throughout its useful life +30 years.
Resistance to bangs with sharp objects in accordance with regulations.
High resistance to fire.
Special paintwork and designs to order.
Base of any size to allow the cabinet to be raised from the ground, providing extra housing for cable input (recommended). In heights of 100 and 200mm.
Stainless steel Aisi 316, EN 1.4401 (maritime areas).
Attachments and anchorings for securement to the ground.
Graffiti-proof treatment.
|
|
With our outdoor enclosures we construct cabinet systems, which have been weather tested and are extremely stable. The electronic components used outdoors are optimally protected from wind, rain, heat, cold and vandalism.
Schroff offer two standardised outdoor cabinets: "Modular" or "Unibody". Flexible assembly possibilities are possible with 19"" technology, ETSI or other non-standard accessories. With the EMC version, rubber seals or foam seals, which are combined with a metallic mesh, provide protection to IP55 which can be guaranteed. The seals can be replaced if they are damaged.
The cabinets conform to the guide lines and standards for shock and vibration and are tested to IEC 68-2-6 and -27, plus ETS 300 019 for safety during earthquakes. Climate control is tested to IEC 68-2-1, -2, -14.
|
|
|
Why risk hazardous spills with unprotected outdoor drum storage? Justrite Outdoor Safety Lockers offer compliant, FM approved storage solutions that simplify meeting local regulations and insurance considerations. Reliable, pre-engineered Lockers are superior to site construction by saving time and money, and offer greater flexibility.
|
|
A convex design to match the curves of the body is the characteristic feature of the ERGO-CASE range of cases.
As "bodycases" they for the first time make it possible for the user to wear the unit comfortably - whether on their arm, chest or waist.
The innovative design not only makes it easier to operate but also easier to read off.
|
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
Series D standard case
- plastic case constructed from
impact-resistant polystyrene, 3mm
- connected by snap locks; no screws
required
- easy assembly
Specifications
Application:
case for boards or small modules
Material:
polystyrene, 3mm
|
|
-Molded hinge type&latch type
1. Molded hinge&latch design is easy to separate the cover from the base for printing or processing holes&cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top&cover gasket.
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 46 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
Self-extinguishing insulated boxes with double insulation. The bases and opaque lids are in PVC and the transparent lids in polycarbonate. Polished light grey surfaces to RAL 7035.
- Sealing gasket in all models.
- Lid fixing by lodking screws or hinges.
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B. or DIN rail mounted terminal
Transparent lid is available for most models.
Wall mounting holes and lid attaching screws are outside the sealing area
Custom material and color available (Bone as standard color)
Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
|
Made of halogen free, impact resistant, self-extinguishing thermoplastic material. SCABOX junction boxes are designed for power distributionin outdoor installations and for housing relays, timers, connecting strips, etc.
|
|
Thermoplastic enclosures are light, their impact resistance is very high and they are easy to clean. In addition, they are easily mounted and machined.
Polycarbonate is suitable for demanding conditions and also for outdoor use. The temperature resistance of polycarbonate ranges from -50 C to +120 C.
ABS is a more cost-effective material than polycarbonate. However, it is only suitable for indoor use. ABS has good resistance to certain chemicals, e.g. strong detergents used in dairies.
The Ensto Cubo M enclosures are made of glass reinforced polyester. Thanks to their sturdy construction, 7 Nm impact strength, corrosion and weather resistance and high tightness, they meet the demands of durability in severe environments.
|
|
PL6 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
PL7 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Integral Steel Earth Continuity Plate.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
|
|
|
|
|
|
|
Richard Whr GmbH does not only have in its program an enormous selection of standard housings, but is also in the situation to supply a customized solution co-ordinated with the respective application. Anywhere, where in the industrial, commercial, public and medical surrounding field one measures, one regulates, one steers, one examines and one seizes, are the housing systems the ideal solution manufactured developed by Richard Whr and. Influences like electromagnetic and electrostatic loads/unloadings, temperature differences, heat, cold weather, vibrations, impacts, shock loads, dirt, dust, humidity u.v.m. require everyday life and industrialsuited concepts, in order to thus exclude malfunctionings of controls and the endangerment from humans and machine. For many applications standard designs present themselves for favourable prices. On the basis of the key components ready to be installed customers in the building block principle PCPC PC, display as well as indicating and control stations can manufacture housings/mechanics, keyboard and CONTROLLER as well as further accessories. To the offer furthermore extensive services belong in the range sheet metal working, like consultation and construction (production of production-correct designs and data files), stamping machines and a transforming, milling, thread cut, bend/edge, slam shut, saw, weld, sharpen and deburr, pins press in/pins weld and rivet, bore, turn, to surface technique for optimum, decorative optics and reliable protection (, paint, powder-coat, screen printings, (glass bead) jets brush), complete solutions and system engineering.
|
|
- flexible use in
- advertising technology
- information technology
- sports facilities
- for indoor and outdoor use
- stylish frame design
- with single- or double-side display
field
- can be mounted upright or hanging
- non-glare plexiglass, tempered glass
or laminated safety glass panels
- customized solutions
- standard models are available
- up to IP 54 degree of protection
- corrosion-protected fixtures
|
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
ITW TekFast hole plugs provide a strong, effective seal for gage and drainage holes necessary for assembly-line operations.
Key benefits of our hole plug designs:
- Cost Effective - Replaces typical metal hole plugs with a light-weight, inexpensive part.
- Non - Corrosive
- Ergonomic - Designed to snap into position quickly and easily.
- Superior Sealing - Heat activated adhesives provide high strength and fill any gaps or voids between plug and sheet metal.
- Versatile - Can be designed for any hole configuration.
|
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
OEM Enclosures- PC or ABS
Manufactured from high performance thermoplastic, polycarbonate or ABS. these Enclosures are suitable for demanding OEM applications, e.g. for the protection of electronic and pneumatic components.
|
|
|
|
|
|
Polycarbonate Enclosure
Polycarbonate Enclosure offer excellent characteristics for the packing of electronic and electrical components as well as complete control systems, even with extreme outside weather conditions and resistance against UV. They are easy to machine and can be configured variably for our customers with screen-printing or with a Membrane keyboard. The lid screws cannot be lost and are made of stainless steel. The standard colour of the enclosure is light grey, similar to RAL 7035. Special paintings available on request. All enclosures comply with the protection class IP 65 according to DIN 40050. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum.
ABS-Enclosures
ABS-Enclosures are excellent for the packing of electronic and electrical components as well as complete controlling systems inside. They are easy to machine and can be configured variably for our customers with screen-printing or with a Membrane keyboard. The lid screws cannot be lost and are made of stainless steel The standard colour of the enclosure is light grey, similar to RAL 7035. Special paintings available on request. All enclosures comply with the protection class IP 65 according to DIN 40050. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum. Temperature resistant: - 40C to + 80C. EMV version with copper conductive lacquer and conductive lid seal are available.
|
|
Enclosure system with flange openings
Robust aluminium distribution enclosure with 4,6 or 8 flange openings
Prepared for the installation of DIN rails
|
|
|
|
Cabinets, Boxes, Cases
