|
|
| Products 181 to 210 of 309 |
|
Boxes polyester: dimensions of 300x250x160mm with 600x500x250mm, carries full or transparent, accessories (platinum of assembly, handles, locks, mural feet mounting,...), sealing IP65, great impact resistance (reinforced glass fibers), electric boxes
|
|
These enclosures are made of heat-moulded polyester, Ral 9002, with a very high mechanical resistance against impacts to allow an IK10.
The waterproof is ensured by a gasket in neoprene between the cover and the body. The high resistance against impacts allows an IK10.
This range is made by 14 references, 7 with blind doors and 7 with transparent doors.
There are 3 types of mounting plate : white self-extinguished polyester, solid and perforated steel mounting plate.
A full range of accessories is composed by (modular chassis, movely support for base plate, ventilation device, wall fastening lug, ...) with several types of locking and keys.
|
|
Thalassa enclosures
■ Polyester monobloc enclosures, reversible, plain or glazed door, IP66, integral top and bottom protective covers.
■ Extensive range of accessories, common to those of the Spacial 3D enclosure range.
root pillar enclosures
■ Polyester enclosures, IP 43, ventilated plain door, intregral canopy.
■ Extremely sturdy constuction with exceptional resistance to mechanical impact and deformation.
■ Polyester plinth option.
Thalassa floor standing enclosures
■ Polyester monobloc floor standing enclosures of modular design, combining 40 dimensions with 4 styles and 5 door configurations.
■ Extremely sturdy construction with exceptional resistance to mechanical impact and deformation.
■ All accessories required for the construction of automation systems, modular and 19" chassis, and for their equipment (internal door, base, plinth, canopy, step slides, horizontal chassis, etc.).
|
|
|
The range of moulded endosures is made up of a wide selection of products such as modular boxes, wall fixed cabinets adapted to special applications for buildings, floor fixed for industrial facilities, electrical distribution, public lighting, etc.
|
|
|
|
|
|
Polyester-Enclosures accord to the high standards of machine constructions, shipbuilding, electroplating and petrochemical industries. Beside the good resistance against most solvents, acids, etc, fibreglass strengthened Polyester is difficult to ignite and is self-extinguishing. They are preferably used as clamp enclosures and as control enclosures in chemically aggressive surroundings such as Refineries or in road tunnels. All enclosures comply with the protection class IP 66 according to DIN 40050 (spray water protected).The lid screws cannot be lost and are made of stainless steel.
The standard colour of the enclosure is grey, similar to RAL 7035. Temperature resistant with Neoprene seal: - 40°C to + 110°C. Temperature resistant with Silicone seal: - 50°C to + 140°C. Special paintings available on request. The fastening grooves are situated outside the seal range. The neoprene lid seal is resistant against oil and petroleum. Special seals such as silicone are available when requested.
|
|
Uniplast range: The answer to your needs for a permament and safer protection of your electrical or electronic systems
Insulating, compact or modular system of enclosures that permits the construction of many different con·gurations, from a plain door to a transparent door, a single or double door and multi-compartment switchboard, effective even under the most severe working conditions.
It complies with the principal of "double insulation", which guarantees the maximum safety to the operating personnel.
The high quality of the material chosen for the construction of these enclosures is tested according to UL norm UL746C§26 "Ultraviolet Light Exposure".
Practice tests in a moderated climate have shown that the polyester enclosures are resistant against outdoor use and aggressive chemical environments for at least 20 years without loosing the quality of the enclosure.
|
|
Plastic enclosure with openings for flange fitting for automation technology
Combination with other polyester flange enclosures possible
Quick release feature
|
|
INTERTEC instrument enclosures are made of long glass fibre reinforced polyester (GRP) in sheet moulded compound design.
This high-tech material has many advantages:
- strength that almost matches stainless steel (non-reinforced plastic material has approx. 100 times less stability)
- the weight of stainless steel is 4 times greater
- by increasing wall thickness and optimum fibre alignment the enclosure can be made with extra reinforcing at the edges
- Corrosion-free
- Excellent chemical resistance
|
|
Pressurized enclosures
Stainless steel 316L, Painted steel (on request).
Pressurized enclosures EEx p II - 316L (AP)
|
|
PILOMAT ENERGY and PILOMAT LONDON:
are ideal to be used with the utmost safety and efficiency
both in indoor and outdoor environments, for
example: markets, squares, areas used for entertainment
events, sports centres, shopping centres, trade
fair pavilions, conference halls, etc. The bollards are
activated by a key-operated control and subsequently
raised automatically via a gas operated actuator.
PILOMAT ENERGY: mobile retractable tower with
semi-automatic movement to deliver: electric power –
water – telephony – data transmission – compressed
air. The configuration can include up to 12 electric
power sockets.
PILOMAT LONDON mobile retractable structure
with semi-automatic movement to deliver: electric
power – water – telephony – data transmission – compressed
air. Enables utilities to be connected
and encloses the mobile structure.
|
|
Turret to passing for distribution electric power complementary and services (water, I telephone compressed air, connections of miscellaneous kind) adapts for installations in areas mercata them, historical center for irregular manifestations, inside of industries, workshops etc
Carrabile Chiusino 25.000kg
Optional: Carrabile Chiusino from 40.000kg
chiusino riempibile carrabile from 25.000 or 40.000Kg.
Max power distribution: the erogabile maximum power 40 KW trifase
|
|
PILOMAT@ ENERGY LONDON B6040
Loading class: 4000 kg.
Crown dimension: 600x430
Lock release: Versione cifrata con blocco automatico
Cover plate: Ghisa perlitica
Category Retractable Bollard - Retractable Bollards
|
|
|
|
|
|
CHARACTERISTICS
Switche disconnectors :
IM from 40 to 500 A with right lateral handle and
visible cut-off.
Handle :
Lateral, isolated, red, lockable with 3 padlocks in
« open » position, can not be unfixed from the outside
of enclosure.
Connexions :
Up/Down or Down/Down connection with pre-cabling
of uper terminals using connecting bars starting from
160 A.
Double door interlock :
impossible to open the door when switch is « ON » and
impossible to shut the switch when door is open.
Visible cut-off :
through transparent polycarbonate lid.
Locking :
using isolating screws for locking of the lid, equipped
with hinges. (other lock on request).
Enclosure :
• box with 3 mm thick polyester fibre-glass reinforced,
Colour RAL 7035
• door made in auto-extinguishible transparent
polycarbonate, with no halegen, implemented with
internal hinges, 180° opening on left hand side,
• overall protection :
IP 55 with air vent.
IP 65 on request.
• auto-extinguishible material according to IEC 695
2-1 standards ; fire-proof according to UL94HB.
• temperature resistant : - 35° à + 120°C.
• IK10 shock resistant : 20 joules.
• 4 wall fixations.
Earth connexion :
using 2 earth connections inside the box.
|
|
|
|
|
|
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
|
|
|
|
The CEFEM steel SAFEBLOC switch Disconnector is a cut-off and lock device. It complies with standards and regulations to ensure the safety of operators in industry, where the risk is permanent.
The SAFEBLOC enclosure includes a position indicator (ON / OFF or I / O) for a better guarantee of safety.
The cut-off system is clearly visible to the operator and is maintained whatever the circumstances.
These boxes can be installed on machines or close to each engine.
The security features are multiple:
The switch contacts are visible when the switch is open, the mechanical indicator allows to view at one glance the position of the switch, double lock prohibits to open the door when switch is ON and the closure of the switch when the door is open, the handle is lockable by 3 padlocks on ON position.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
In all heavy process industries: cement, mines, quarries, Steel, Paper, Sugar, Glass industry…
|
|
|
|
|
|
The new DIN enclosures IDG-B6 and IDG-B9 arefullv insulated and fulfill the requirements of the machinery and car industry.
The enclosures have the installation width of 105 mm for the IDG-B6 and 157 mm for the IDG-B9. They are designed for easy snap-in assembly on DIN-rails.
Three different versions of the housing cover allow customer specific solutions- There can be used commercial terminals from different suppliers or for matea-ble solutions with terminal plugs the according PCB headers from different suppliers with the according terminal plug headers.For solutions with connectors or terminals on the front side there is a fully closed version available.
The transparent front cover protects displays, Potentiometers or other contol devices on the front side against disadjustment or damages.
Features:
2 installation widths:
IDG-B6:105.0 mm, max. 36 terminals IDG-B9:157.0 mm, max. 52 terminals
Overall dimensions per DIN 43 880, size 1
Mountableto DIN rails per DIN 46 277 und DIN EN 50 022
Various termination options: 5.0/5.08 mm terminal blocks 5.0/5.08 mm; pluggable terminal block; Choice of connector on front cover.
Transparent front cover protects displays and control devices
DIN rail clip pre-assemled on housing base
Choice of colors and custom design available upon request (pending min. volume)
2 smaller installation widths are also available: IDG-B2: 35 mm; IDG-B4: 70 mm
|
|
In industrial processes different parameter measurement systems are mounted to optimize and control the process. Housings are a very important part of the whole system as they allow to insert the sensors into the media at a specific place in the process (pipe, vessel or basin).
Depending upon process requirements and the type of electrode/sensor used (pH/ORP, DO, conductivity, turbidity, CO2), the design and function of the housing can vary considerably. The demands placed on process adaption methods by plant manufacturers, endusers and not least legislation, are numerous, particularly in the interests of process reliability, e.g. sterility/hygiene, and operator safety.
METTLER TOLEDO offers, apart from their world-famous INGOLD weld-in sockets, a wide selection of housings to cover the manifold requirements of the process industry, from simple static models throughto sophisticated and certified retractable versions for automated sensor cleaning.
|
|
outdoor racks and enclosures
applications
- Mobile telephony: energy racks.
- LAN, WAN networks.
- Metering stations.
- Electronics.
range
- Metal or polyester «indoor» racks and enclosures.
- Metal (simple or double skin) or polyester «outdoor» racks and enclosures.
- EMC protection.
- Anti-vandalism protection.
- Anti-seismic protection.
- IP 42, IP 55.
- Cooling by convection or by cooling unit.
- Adapted to accept 19" components.
- Individual product configuration.
|
|
|
The good qualities of steel include the potential it offers for customer-specific solutions: even a smaller production series can easily be customised. Stainless steel is suitable for outdoor use, and for demanding industrial environments. Acid-proof steel is used for environments requiring extreme resistance to corrosion, for example, in the off-shore industry.
|
|
|
We are developing and producing high-quality industrial enclosures according to our customers’ requirements. The combination of modern production engineering and traditional craftsmanship convince through ergonomically precise and robust casing solutions. From concept to realisation – together we will come up with your solution.
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
MNX polycarbonate and ABS enclosures utilize world-class injection moulding technology. They are designed to house and protect all kinds of electrical and electronic components in the most demanding applications. The MNX includes more than 260 different variations.
Dimensions range from 100*100*35 mm to 255*180*175 mm.
PC: IP 66/IP 67; IK 08; NEMA 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/IP 67; IK 07; NEMA 1, 4, 4X, 6 (12 and 13); UL94HB
|
|
|
|
|
|
Stainless steel type Wall Mounted Enclosures, Floor Standing and Suite Enclosures, Desk Consoles, Terminal Boxes, Command Panels and special enclosure models are used in harsh environments or hygienic applications, e.g. in the chemical industry or the food and beverage sector. Their technical properties (high IP class and special EEx design, where applicable) ensure full protection even under extreme conditions (low temperatures, high humidity). Selected accessories complement this range to enable conclusive enclosure solutions.
Stainless Steel Wall Mounted Enclosures, Standard:
- enclosure and door made of 1.5/1.25 mm gauge stainless sheet steel material no. 1.4301
- enclosure fully self-contained
- door fitted with double chamfer along all edges for increased stability
- concealed hinges
- door opens ca. 147°
- door fitted with 4 M6 fastening bolts
- rubber profile along all edges (IP 65 compliant, EN 60529)
- sash fasteners with 3 mm double bit insert
- 2.5 mm sheet steel mounting plate, screwed to fitting profiles
- earthing for enclosure, door, and mounting plate
- 4 drillings in the enclosure's back plane (fitted with plastic blanking plugs) suitable for wall mounting lugs or to be used for direct wall mounting
- outside surface smoothed
|
|
|
These enclosures are developed for food, chemicals, oil paper, pharmaceutical industries, ..., where it is required a strict hygiene or a high resistance to corrosion. We offer 2 types of polishing : brushed or micronized in stainless steel 304L (316 on request).
|
|
|
|
|
|
Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Consoles
Elegant, functional consoles manufactured in finely polished
Aisi 304 EN-14301 stainless steel, easily accessed whose design allows for an IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immediate delivery.
Special solutions:
Custom built to order.
Plinths (page 19).
Metal legs.
Polycarbonate window door.
Manufactured in Aisi 316 EN-14401 stainless steel.
Bakelite isolated or stainless steel mounting plate.
Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
|
Stainless steel enclosures are suitable for many environments, such as the chemical, food, pharmaceutical and oil industries. Being one of the fi rst on the market with stainless steel enclosures. Eldon have a long history and experience with this kind of product.
|
|
|
Cases standard stainless AISI 316, sealing IP66, dimensions of 82x82x85mm with 230x260x125mm, resistance in temperature of -40 to +100°C, corrosion resistance, cases electric stainless, cable joint boxes stainless, button stainless boxes
|
|
These Enclosures are made of 304 Stainless Steel used in terminal boxes.
We offer acid resistant AISI 316 Stainless Steel solutions upon demand.
Standard equipment includes a perforated mounting angle to facilitate installation of the mounting plate or DIN rails. This makes it possible to drill access holes for cables anywhere along the sidewalls.
|
|
|
|
Cabinets, Boxes, Cases
