|
|
Sturdy, flexible and portable, modular, elegant design, EMC, IP, Handles & Feets i. e. for the use in Test & Measurement. General electronic packaging and medical industries.
|
|
ratiopacPRO / -air
- Case with 19"-compatible dimensions
- Identical front and rear structure (symmetrical)
- Identical space for boards in all versions
- EMC shielding optional via gaskets
- Suitable for extraction handles complying with IEEE 1101.10/11 for CompactPCI and VME 64x applications
propac
- Desktop case or portable case p case or portable
- Design alternative for compac
- Degree of protection IP 20
- EMC shielding optional via gaskets
- Extensive accessories, for portable applications
- High stability
compac
- Desktop case or portable case
- Degree of protection IP 20
- High stability, configured for portable application
- Identical front and rear structure
comptec
- Can support 19" subracks
- Height 3 U to 12 U
- Degree of protection IP 20
- High stability
- Identical front and rear structure (symmetrical)
- With protective earth connection
|
|
|
Km-Gehäusetech is a product group within Richard WÖhr GmbH and developed by assumption of the Km-Gehäusetech GmbH & CO. Kg, Villingen Schwenningen, by Richard Wöhr GmbH in yards. The product range covers a variety to standard and customized plastic and aluminum housings, which lead in combination with Foientastaturen, electronic construction units and refined accessories to intelligent, custom-made solutions.
|
|
|
|
|
|
The KM6 Caseframe is designed for applications that require the mounting / housing of Eurocard-style electronics (cards or modules) in either a 19” rackmount or desktop formfactor. A step up from a standard subrack, its design requires no external housing, and offers optional EMC protection along with the integration of cooling fans and power supplies in a self contained, attractive unit. A range of accessories are available including Tilt Feet, Carry Handles, Fan Trays and Hinged Front / Rear Covers, allowing the requirements of many applications to be met with standard off-the shelf parts. The use of standard KM6 subrack components means that the KM6 Caseframe can accept most accessories from our KM6-II product range, including, for example, card guides, front panels and plug-in units. The top and bottom covers are easily removed for system building and servicing requirements.
Accessories A wide range of accessories support our four main subrack families. The majority of items are compatible with all platforms; each subrack variant also has its own dedicated range of support products.
* Plug-in modules and front panels
* Card Guides
* Divider kits
* Top and bottom covers
* Thermal management products
|
|
Our standard range has more than 160 references of DIN Rails.
It allows to answer any type of requirements :
- mini-rail 15x5,5
- symmetrical rail 35x7,5
- symmetrical rail 35x10
- symmetrical deep rail 35x15x1,5
- symmetrical reinforced deep rail 35x15x2,3
- asymmetrical rail 32
There exists :
several types of treatments : zinc bichromate or white zinc
several types of raw material : zinced steel, galvanised or stainless steel
several lengths : 1,2, or 3 meters 2 types of perforation
Also, we manufacture a wide range of C Rails and Uprights (2,5 thickness) in L,U,Z shape.
This range of rails and uprights is completed by several types of accessories : metal clips, nuts, mounting brackets, spacers and insulators.
|
|
|
|
|
|
The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the auto motive industries.
Designed for easy snap-on assembly onto DIN-rails by integrated snap-on clip. These enclosures facilitate economical device assembly with optimal utilization of space. For the termination of the conductors of the cable 2 enclosure versions are availible:
- pluggable terminals for easy servicing and exchange (commercial pin headers on the pcb.
- screw terminals for a fixed termination of the conductors. For effective heat dissipation the LDG-S enclosure features a base part with integrated ventilation slots. Closed versions (without ventilation slot) are availible upon request.
Features:
2 installation widths: LDG-S2: 22.5 mm; LDG-S4: 45 mm.
Options for the termination of the conductors:
LDG-S2: 4 screw terminal blocks with 4 terminals each or 4 pcb headers with 4 pin contacts each for connecting cable cnnectors with 4 pins.
LDG-S4: 8 screw terminal blocks with 4 terminals each or 8 pcb headers with 4 pin conacts each for connecting cable connectors with 4 pins.
Easy snap-on assembly on DIN-rails according to DIN EN 50 022
Easy assembly of the enclosure achieved by snap-in design of the two base part and the top part
Transparent housing cover with the option for a label
Customized colors and versions upon request
|
|
l Hosing shell moulded in ABS
l Mount easily onto standard DIN rail
l With base for mounting rail
l PCB can be connected with terminal by welding
l Fast mount due to screwless assembly
l Custom material and color avilable
l Temperature range -20°C - 70°C
|
|
OKW offers a comprehensive range of cases for DIN rail mounting. All types are extremely installation-friendly, for mounting components as well as for connection work!
Your advantages:
- Different connection options for commercial components such as terminals, PCB plug headers and front connectors.
- Without/with integrated connection system.
- Without/with ventilation slots.
- Different sizes following DIN 43880, unit 1.
- Suitable for DIN rails EN 60 715.
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
DIN-MODULAR CASES TYPE A:
The DIN-MODULAR CASES TYPE A differ from conventional systems for mounting control panels complying with DIN IEC 61 554 through simple, screwless assembly of all case parts. This reduces production work and ependiture to a minimum. A further advantage of this design principle is the implementation of flexible case lengths to match the application exactly.
DIN-MODULAR CASES TYPE B:
THE DIN-MODULAR CASES TYPE B is available in 3 different case designs.
- For horizontal slide-in mounting of PCBs from the front, there are closed cases with removable front frame and rear panel.
- Versions with separate lids allow vertical and horizontal slide-in PCB assembly.
- A special version for 19" racks rounds off the comprehensive range.
|
|
DIN rail case 420 for PCB size 100mm x 160mm
DIN rail case 420 for PCB size 100mm x 220mm
|
|
|
Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering.
|
|
* Designed for the PN, DS and DSN ranges.
From 16 A to 63 A
* Impact-resistant thermoplastics (IK08)
* Captive screws made of stainless steel
* Protection degree IP66/67
* Can be combined as required
* Connection possibilities: 2 x 1.5 mm2 to 5 x 35 mm2
|
|
Compressed air and electrical outlets within easy reach
The power box provides a simple and safe means of powering:
- pneumatic tools
- blowers
- electric power tools
- and inspection lamps
Suspended from the ceiling at the desired height, power boxes make life easier for operators by avoiding:
- the need to move around the workshop
- hoses trailing on the floor
- tedious operations in the workspace
The built-in handle and hanger makes it easy to grab the box while freeing space at the operator's work position.
|
|
|
|
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
|
|
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
|
|
|
The Tern Way 800 pan assembly has been designed for easy installation, ideal for switchboard manufacturers and a wide range of specifications. A short time withstand rating of 35kA or 5()kA for I second makes this assembly one of the most versatile on the market. Busbar raiings are available at 800A and 1250A.
Key Features
• Busbar assembly and MCCBs manufactured in U.K.
• Fully shrouded busbars.
• Four possible frame sizes for outgoing MCCBs.
• Shrouding to IP20 protection.
• Terminal covers available for both line and load side terminals. (line side fitted as standard).
• All MCCBs are padlockable in both ON and OFF position.
• Easy connection onto assembly.
Specification
Manufactured in accordance with BS 5486 Part 1 (1990)/ EN 60 439-1 (1990). Busbar ratings 800 Amps and 1250 Amps. Fully tested for both 35kA and 50kA short lime withstand for 1 second. 6. 12 and IS triple pole versions which accept outgoing MCCBs from 125A frame size single pole to 250A frame size triple pole. 3 way triple pole version which accepts outgoing 400A frame size triple pole MCCBs.
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
|
Electric steel boxes, with reversible frontal door and basic panel 20/10, meeting the standard INTO 60439-1, protection IP 55, also provided with transparent door and screen-door, dimensions of 300x200x150mm with 1200x800x300mm
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged
|
|
|
These boxes are for distributing electrical power (maximum 40 KVA) to service industry, craft industry and manufacturing industry buildings: storage warehouses, garages, maintenance hangars, sheet metal workshops, wine cellars ...
|
|
|
|
|
|
This chapter illustrates the technical characteristics of FM enclosures for distribution
boards and of ILME industrial socket-outlets for which these enclosures are
designed.
It is possible to use SQ interlocked socket-outlets for industrial use (with or without
protection devices), simple flush-mounting Pluso socket-outlets (without interlock)
and compartments for modular units.
These components enable to configure a wide range of distribution boards, both
mass-produced (AS) and custom-made (ANS), suitable to meet all possible installation
needs.
FM enclosures for distribution boards offer tested reliability and can be used, in combination
with FM socket-outlets for industrial use, as integrated modular systems to
configure distribution boards for industrial socket-outlets. Distribution boards with
ILME enclosures and socket-outlets can be installed in:
- Industrial applications
- Services applications (commercial, exhibitions, etc.)
- Agricultural and livestock breeding applications
- Residential and similar applications (i.e. common areas of condominiums, cellars,
garages, community buildings, kitchens, etc.).
|
|
These boxes comply with the norm NFC 15-100 .
They provide optimal protection against electric contacts: differential devices, isolating plastrons and casing.
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
|
These panel enclosures are designed for supplying electricity to workstations in workshops, mainly for car industry.
|
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures. The enclosures dimension start from 50X65X55 to 600X800X280 mm and DSE have 400 kinds of enclosures-! Refer to the gereral catalogue of HIBOX in Direct-Industry or www.dsehibox.com
|
|
DISTRIBUTION ENCLOSURES
ECOLOGY series of distribution enclosures can be sealed and they are provided with opaque or transparent (UV protected) reversible windows. They are made from halogen free longlasting plastic material and equipped with dust caps for wall mounting screws and 1/4 quick locking unloosable screws.
They have supports for mounting plates fixing, they are prepared for installation of earth and neutral bars and cable entries are adapted to the metric system. On the 26 and 57 modules versions DIN rail can be adjusted on its height.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
Wall mounting enclosures :
The balance between pure design and total pragmatism is never easy to achieve. The unique Eldon Multi-Mount® enclosure will make your specifi cation and component requirements easier to come up with. Making your enclosure both practical and aesthetically pleasing at the same time.
Floor standing enclosures :
Nowadays, mounting speed is one of essence and Eldon Multi-Flex® enclosures belong to the fastest you'll fi nd on today's markets. With fewer parts than our previous designs, which means that availability of the parts you need is always high.
|
|
|
|
Cabinets, Boxes, Cases
