|
|
| Products 91 to 120 of 309 |
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist however particular the task in hand.
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures.
DSE Electronic Box has been developed to protect electrical and electronic components in wet, dusty, and hazardous environments.
|
|
|
An extensive range of enclosures and accessories that let you install any voice and data application in any area, be it industrial, services or tertiary sector.
|
|
Each model includes two aluminum end panel and all hardware
PCB can be slide into internal slots pre-extruded in the enclosure body
The depth of enclosure body is variable upon customerfs request
Surface of enclosure is painted in black(35A series)or clear anodized(35C series)
The 35C series enclosure includes two plastic bezel kit(UL 94-HB)
Custom special colors available upon requirement
|
|
The two part Electronic Enclosure in a shapely version made of shock toughened Polystyrene is especially suitable for the packing of small control systems and tabletop units. An excellent stability is reached through groove and clip sealing.
Open side parts of the lower enclosure allow a swift mounting of the components. In the standard specification, it is possible that the lid of the lower page is hidden-screwed, optionally with a lid fastener of the lid upper page. Specification with air slots (Protection class IP 20) or with integrated Schuko plug is deliverable immediately.
Temperature resistant: - 20C to + 60C
Standard colours: Lower part dark grey similar to RAL 7012. Upper part light grey similar to RAL 7035. Special painting or with See-through lid available on request.
|
|
|
|
|
|
Standard cases
There is a very great selection of standard cases at our disposal for carrying out your projects in-house, as well as a very large variety of processing technologies.
The advantages for you as our customer are obvious make use of them!
* Manufacturer-independent consulting based upon your specifications
* Profound knowledge of the market and many years of experience
* Extremely large number of perfected cases, as well from own development and fabrication, as from world-wide acquisition.
There is often a price benefit resulting thereof, because of the selection of cases which are already close to the desired product in there basic conception. Moreover, our customers appreciate the wide variety of design resulting from this, and the optical difference from widespread case types of the market leaders
* For modifications in large quantities or ones which cannot be realized mechanically, or only with great difficulty, the exchangeable tools designed in close cooperation with the device manufacturers offer a cost-effective solution
* Problem-free implementation and processing of customer-specified foreign products
* As a matter of course, you can also make use of our processing service for customer-provided cases
* Price benefits because of world-wide delivery contracts as well as purchasing of large quantities
* Development and fabrication of cases and enclosures up to complex complete solutions
|
|
SOLID range is an excellent choice to house electronic and electrical components. It is also an ideal alternative to polyester enclosures. It is available with screw and hinge covers in both polycarbonate and ABS.
Dimensions range from 188*188*130 mm to 558*378*180 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 3, 3S, 4, 4X, 6, 6P and 12; UL-94 5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13; UL 94 HB
|
|
Functionality and safety for the built-in electronics.
Variability and the best possible adaptation to individual electronics are the key features offered by ROSE electronic enclosures. The three product lines provide the best possible protection in all applications.
Multitronic - PCB enclosures in many different designs
Profitronic - Profile enclosures for sophisticated electronics that can be used both indoors and outdoors
Wavetronic - Desktop enclosures for lab and instrumentation technology, variable in height
NoVoTronic - Aluminium profile enclosure system in 3 sizes. For data collection, PC, measurement and control technology.
|
|
We package your electronics! The Weidmller range of products for housing your electronics comprises numerous different open and closed types for mounting in electrical cabinets or for installation directly in the field.
Our modern and innovative electronics housings are successful because of the synergy between design, connection systems and functionality. These success factors form the focus for the ongoing developments and expansion of the range of electronics housings to meet your future needs. CAD data for PCBs can be provided for all housings, and users can choose between screw or tension clamp connections.
|
|
The growing electromagnetic pollution and the European and international standards require electromagnetic shielding.
The European EMC 89/336 directive affects electric and electronic equipment which can create or be subject to electromagnetic disturbances.
Cabinets and empty enclosures in general do not directly generate any disturbance and are not ruled by the EMC directive.
In order to meet the directive and offer an effective product, Eta has developed a specific Areta cabinet suitable for EMC applications.
|
|
We offer complete manufacturing of custom cabinets, boxes and enclosures for shielding unwanted EMI. Magnetic Shield Corporation delivers the highest quality shielding enclosures, fabricated to meet your design criteria. We fabricate engineering prototypes, small test runs, and annual production volumes to meet your OEM delivery schedules.
It is this level of expertise that you draw upon when you rely on Magnetic Shield Corporation, an ISO 9001:2000 Certified company, to mitigate your EMI problems. Our staff possesses an intimate understanding of the complexities of creating quality custom magnetic shielding. They know how to maximize the magnetic shield's effectiveness through the most efficient design, the best choice of material and the manufacturing process itself.
|
|
Schlegel and DUX enclosures offer much space inside safeguarding your control units and terminal blocks to an optimum. The enclosures are made of plastic or aluminium alloy casting.
The varied types allow to find the right enclosure for every application.
|
|
Deep Drawn aluminum enclosures are our specialty. Zero Manufacturing perfected the deep draw process, and now we have the largest range of tooling in the world. No matter what the required size and shape, ZERO can handle any deep drawn requirement.
The numerous advantages of deep drawn aluminum products are clear. ZERO uses only the highest grade aerospace aluminum throughout the deep drawing process; these light weight aluminum alloys, known for their strength, are also incredibly resistant to corrosion. Aluminum enclosures provide excellent resistance to breakage and fractures, and optimal protection against water and even salt damage.
In-house customization and modifications are available for all our aluminum products. For seamless, draft-free construction in aluminum enclosures, precision miniatures, or deep drawn cans look no further than ZERO for all your manufacturing needs.
|
|
GRP INSTRUMENT ENCLOSURE (MODEL CP)
Instrument enclosures are used to protect instrument from corrosion, chemical attack, mechanical abuse, freezing and weather.
They are made in GRP ( Glass Reinforced Polyester ) with stainless steel hardware and closed cell neoprene gasket.
ENCLOSURE SPECIFICATION
Made by two identical mouldings
Light grey colour
Waterproof construction
Antistatic
Fire retardant and self extinguishing
UV resistant
Non absorption of hydrocarbons
ACCESSORIES
Viewing window
Insulation for heat retention
Electrical heating
(for hazardous or non hazardous area)
Steam heating
Thermostat
Wall or pipe stand mounting bracket
Internal mounting bracket
Grommets, cable gland, bulkhead compression fittings
Identification label
Enclosures can be supplied fully assembled with instrument, manifold and accessories, ready to be installed on field.
|
|
Flush mounting enclosures with horizontal door
Flush mounting enclosures with vertical door
Surface mounting enclosures IP40
IP40 surface mounting enclosures with vertical hinge
IP55 surface mounting enclosures with horizontal hinge
Surface mounting enclosures series 18
Surface mounting enclosures series 20
Accessories for enclosures
|
|
|
IMO's range of Enclosures manufactured in ABS offer IP66-67 protection and are pre drilled for base plate or din rail fixing.
|
|
Hawke International, a member of the Hubbell Inc group of Companies, has over the last 50 years, built a world-wide reputation in the hazardous area and hostile environment markets, with an innovative range of cable connection, termination and barrier products.
Our GRP Enclosure range is the ultimate in robust construction featuring Anti-Static Properties, External Mounting Feet, Corrosion Resistant Stainless Steel Lid Fixing Screws with Nylon Retaining Washers, One Piece Durable Captive Moulded Silicone Gasket and Stainless Steel Rating Label and includes the innovative new PL626 Enclosure.
Our Stainless Steel Enclosure range features a Robust Stainless Steel Construction, Electropolished Surface Finish, Softer Finished Rounded Edges, Rigid Slotted External Mounting Feet, Superior Silicone Sponge Gasket and includes the ground breaking new EZE range.
|
|
|
VCC's HMS panel lens has been designed to display printed circuit board mounted 10mm LEDs. The unique feature of the HMS low-profile lens is its special threads. Each mating component is designed with six single-entity threads. The six individual threads allow for multiple mating entry points between the lens and the retaining ring. In addition, the amount of rotation required to secure the assembly is only a one-half turn. HMS mating components have a unique thread cross-section design that eliminates over-tightening- a typical cause of thread stripping of plastic mating parts. Any attempt to over-tighten the HMS will result in the retaining ring sliding into a previous thread without damaging either component. The unit can then be retightened to a secure position. The assembly is installed by hand, eliminating the necessity of tools. A specifically designed compression seal serves to provide both moisture and dust protection for the HMS.
|
|
INTERTEC instrument enclosures are made of long fibre reinforced polyester (GRP) in sheet moulded compound design. The enclosures are very strong and have an excellent chemical resistance. They are therefore preferred in chemical industry and raffineries.
INTERTEC offers worldwide the largest range of instruments enclosures as well as the corresponding mounting systems.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
|
|
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
Switch and control systems
- Electric switch and control systems
- Marshalling and distribution panels
- Electrical switch panels in accordance with national and international standards
- Special cabinets (steel, stainless steel, aluminum) for instrumentation, control and electro-technics and for use in hazardous areas
BARTEC BENKE designs and manufactures control system solutions for automation of machines and processes.
|
|
Safety enclosures for explosive environments are meant to
be used in areas with explosion risk 1, 2, 21 and 22 gaz G
and dust D according to 94/9/CE directive.
They ensure emergency stop, load break for electrical
maintenance and switch disconnection next to all low voltage
network.
|
|
|
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Under ATEX, the requirements placed on EX enclosures for use
in explosion hazard atmospheres are high.
For this reason, Rittal refuses to compromise in this area. Enclosure concepts proven a million times over are tailored to the specific Ex requirements.
The results is a series of empty enclosures providing ideal conditions for applications in the chemicals
and petrochemicals industries, in the offshore sector
and in the foods industry.
|
|
|
|
|
|
Our product range contains a wide variety of enclosures which offer a selection of sizes, designs and materials. It is designed for single installations as well as for large distribution units. The dimensions of the enclosures are so designed that they can be combined into a large modular unit. A large number of components, such as contactors, switches, instruments and PLCs can be built into these enclosures. Naturally, customer-supplied equipment layout is designed by us to customer's requirements. Cable entry is either direct (cable glands or conduit entries) or indirect via en EEx e housing (stud-type or conductor bushings).
The design and installation of explosion-protected distribution and control boards having flameproof enclosures require considerable experience and careful consideration of relevant regulations in relation to the application data. Only thus are technically and economically satisfactory solutions, which combine a user-friendly design with a high degree of safety, possible. In addition to Ex-regulations, the general regulations must all be bserved in the assembly of distribution and control boards.
Standard industrial electrical equipment can be bult into enclosures. It is, however, subject to a "type test" by a recognised testing station. R. STAHL has such certificates issued by PTB permitting the assembly of explosion-protected systems for all standard applications.
|
|
We were dissatisfied with what was available for mounting single and multiple rail-mount instruments in the field, so we designed our own. Made of metal with a rugged clear polycarbonate cover, the R-BOX meets standards for enclosing indoor and outdoor electronics approved for use in instrinsically safe and non-incendive areas. It installs quickly and easily on a surface or pipe, or in a panel.
Use the R-BOX with our SPA and SPT Site-Programmable Alarms and Transmitters, TRY and SIY PC-Programmable Transmitters, and our complete line of economical ECT Signal Isolators, Converters, Repeaters, and Splitters.
|
|
Technical Data:
Version: II B
Explosion protection: Ex II 2 G
Ex II 2 D
Ex d, Ex d[ia] II B
Certificates: empty enclosure: INERIS - 00 ATEX 0021 X
Material: copper free aluminium
Surface treatment : unpainted, painted on request
Ingress protection : IP 65/67 in accordance with EN 60529 on request
Temperature range:
-50C to +55C / Ex-d IIB T6/T5/T4
-50C to +40C / Ex-d (ia) IIB T6
-50C to +40C / Ex-d (ib) IIB T6
-50C to +55C / Ex-d IIB+H2 T6/T5/T4
-50C to +40C / Ex-d (ia) IIB+H2 T6
-50C to +40C / Ex-d (ib) IIB+H2 T6
|
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands
|
|
|
|
Cabinets, Boxes, Cases
