|
|
SCAME, ADVANCE 2 Series, interlocked socket outlets have smooth and well-connected surfaces, with no sharp edge or lines, included the hand grip, which ensure top safety and ergonomic use as well as easy cleaning, being installed in environments that particularly need such requirement.
A vertical convex strip symmetrically runs along the front side, gathering the handgrip control, which can be also provided with lock, the transparent opening for the monitoring of switches or protective fuses that connect down with the socket, following the round profile of the cover and being a sort of functional axis of the product. The small window has been installed by overprinting. It allows maintaining the IP67 degree of protection without using any gasket or shutter, with perfectly smooth surfaces.
|
|
|
OMNIA Series, in surface mounting and flush mounting versions without protective devices, is designed for industrial use could also be used commercially with its attractive appearance and reduced size.
|
|
|
Power supply connectors e.g. according to DIN 45323 and JEITA RC-5320A. Wide range of parts, 1.7- 7.0 mm diameter. For low load currents up to 3 A at 34 V DC.
|
|
|
|
|
|
The iCon is a fail-safe InterConnect method that provides versatility and convenience for test engineers. It combines signal, power and coaxial modules in one compact device. High density modules can be used for mating up to 320 signal contacts using VPC’s QuadraPaddle technology. Engaging the ITA and the Receiver only requires a quick half-turn of the handle. This engaging mechanism secures the connector while guaranteeing consistent performance up to 10,000 cycles. Its keying and guide pin configurations protect contacts from damage when using multiple connectors, and contacts have been recessed for added pin protection. The removable U-shaped cable clamp and slide-off cover allow modules to be pre-wired before assembly providing ease of installation and serviceability.
Convenient Rack and Panel Connector
* Slide-off cover allows access to probe points while engaged
* Fail-safe features include offset guide pins, recessed ITA (interchangeable test adapter) contacts and keying pins
iConEMI
* Electro-Magnetic Interference is protected by the stainless steel fibers in the plastic cover and threaded metal coupling adapter minimizes unwanted noise and maintains signal integrity.
* For reduced wiring cost and ease of integration, the iCon receiver is capable of being mounted directly to PCBs.
Innovative and Practical Module Features
* Standard Modules allow a mix of I/O
* Captive hardware in modules guarantee screws will not get lost
* Rear mount modules allow for easy installation of pre-wired cable assemblies
* Modules available in coax, power and signal—other module types available upon request
|
|
The HiPro HV-Module presents a major improvement to high voltage modular connection systems. Crimp contacts provide the possibility of connecting conductors with different wire gauges, increasing the modules applicability. The Module is designed to withsatnd voltages up to 18 kV DC and a 30 A current load and increases the variety of possibilities for custom-application industrial connectors.
Find more information on the datasheet and on www.ges-electronic.de
|
|
Marechal Electric multicontact plugs and socket-outlets are used to signal and control purposes. They convey information (power) and signals (low voltage). Automatically watertight IP66/IP67, their metal casings guarantee an excellente resistance to shocks, corrosion and high temperatures: from -25 °C to +40 °C.
With the same butt-contact technology, the complete range of connectors from 6 to 37 contacts is compact and provides a high eletrical performance.
They are specially designed to combine low currents and high current contacts: telephone line connections, wastewater treatment, town equipment, emergency vehicles...
|
|
* Polarity: 36+ E
* Max. 5 A
* Maximal operating voltage: 220V AC
* IP65 as soon as the plug is connected
* Equipped with silver-nickel butt-contacts for added reliability and lifetime
* Casings made of metal protected against corrosion (IK09)
* Operating temperature: -40°C to +60 °
* Cable entry point max. M40
* Interlocking is performed via padlock
* increased safety "e"
* ATEX Directives 94/9/EG
* EN 60079-0, EN 60079-7, EN 61241-0 und EN 61241-1
* IEC 60079-0, IEC 60079-7, IEC 61241-0 und IEC 61241-1
|
|
The Winchester Electronics line of PC Power connectors provides a versatile and effective means of supplying low- to mid-range power for board-to-board applications. PC Power connectors are available in 8-, 12-, and 30-position socket receptacles and pin headers. All connector types are available in straight and right-angle solder terminations as well as straight compliant press-fit terminations. The compliant press-fit connectors are available for the "standard" press-fit PCB hole size of 0.64" and also in a .080" PCB hole size for the direct drop-in replacement of solder termination connectors.
PC Power compliant termination connectors utilize Winchester's unique
"C-Press" contact design. The press-fit installation of C-Press contacts do not require soldering and, as a result, are a more cost-effective means of board termination. C-Press contacts readily conform to plated through-holes and maximize mating surface area for reliable and effective board connections.
|
|
Marechal Electric manufactures a comprehensive range of both industrial and hazardous-area electrical connectors from 5 to 700A.
However the decontactor is also switch-rated and thus safe to make and break and provide visible isolation. As such a mechanic can disconnect on load and isolate an equipment in seconds without incurring the costs of an electrician. Downtime is reduced with lower labour costs.
Automatically IP66/IP67 watertight when the plug is inserted, Marechal products provide excellent resistance to shocks and corrosion.
Marechal Electric’s advanced technology with silver-nickel butt contacts, guarantees superior electrical performance. Moreover, it can simplify and reduce installation costs thanks to its dual voltage: 3pne 415 V sockets which accept 3pne 415 V, 3p+e 415 V and spne 230 V plugs.
Marechal Electric's products constantly meet plant engineers. They comply with the French decree N°88-1056 dated 14/11/1988, the european and international standards IEC 60309-1.
|
|
* Extremely compact design
* mA - 30 A
* Up to 500 V AC and 130 V DC
* SPS signal can be transmitted
* Automatic IP66/67 watertightness when connected without additional movements being necessary
* Silver butt contacts for optimum current transmission
* No access to live parts
* Housing made of glass-fibre reinforced polyester,
highly resistant to chemical agents, UV radiation, shocks, ...
or made of anti-corrosion treated metal, providing high-temperature resistance and excellent mechanical resistance
* Multipin versions
* 16 different keying positions
* IEC/EN 60309-1
* In compliance with the European Low-Voltage Directive
|
|
- No minimum order quantities
- Same day shipment on in-stock products
|
|
MUREVA.Configured
A special service to better meet your requirements.
MUREVA.Configured is:
- The possibility of building a sealed switchgear solution, surface or flush
mounting, perfectly adapted to your requirements.
- A range of simple functions that can be incorporated for you based on multiple stations or frames.
with MUREVA.Configured
- You save installation time.
- You optimise stock to a finished product.
- You can customise your installation.
|
|
Conventional high current plugs and socket-outlets are difficult to handle and don't guarantee watertight for plug insertion and removal.
Marechal Electric well known for its safe and robust, offers a product line that goes from 315 to 700 A and up to 1000 V a.c. Usually used in harsh environments, they are automatically watertight IP66/IP67 as soon as the plug is inserted in the socket and offer a high resistance to shocks (IK08/IK10). Built with silver-nickel butt contacts, they are corrosion resistant and provide a high electrical performance even after years of use.
Simple to connect and disconnect, Marechal connectors and plugs and sockets are safe for users and equipment through its pilot contacts that de-energize the circuit when the mechanical lock opens.
They are ideally suited for power supply to machines for mining, ship, power generator system, shipyard and other harsh environments requiring high current connections.
|
|
SCAME have further improved the performance and design of their wide range of industrial plugs and sockets that comply with IEC309 standard. special attention has been pait to the use of isolating materials and the treatment of metal components.
The outstanding mechanical characteristics of IEC309 Series plugs and sockets and their ability to withstand weathering and chemicals make them safe and reliable even in the most severe environmental conditions.
|
|
* DECONTACTOR for motors, can be connected and disconnected under load
* 40 A - 125 A
* 3 to 30 kW
* Up to 690 V AC and 250 V DC
* Protection degree IP67 achieved when ring is turned (protection against dust penetration and temporary immersion in water)
* Can be locked in the ON and OFF position
* Silver butt contacts for optimum current transmission
* No access to live parts
* Housing made of anti-corrosion treated metal
providing high-temperature resistance and excellent mechanical resistance
* Versions with auxiliary contacts
* 24 different keying positions
* IEC/EN 60309-1
* Load-breaking capacity according to IEC/EN-60947-3, AC3 and AC23
* Conformity to the Machine Directive in terms of power supply isolator device
* American standard UL 98/508
* European Low-Voltage Directive
|
|
* Plugs and socket-outlets with an integral switching device
* Separated by simply pressing the latch
* 16 A - 63 A
* Up to 690 V AC and 250 V DC
* 1000V (no on-load disconnection)
* Automatic IP66/67 watertightness when connected without additional manipulation being necessary
* Silver butt contacts for optimum current transmission
* Socket-outlet safety shutter, no access to live parts
* Housing made of glass-fibre reinforced polyester, highly resistant to chemical agents, UV radiation, shocks, ...
* Extremely compact design
* Versions with auxiliary contacts
* 24 different keying positions
* IEC/EN 60309-1
* Load breaking capacity according to IEC/EN 60947-3, AC22/AC23
* In compliance with the European Low-Voltage Directive
|
|
Cavotec Connectors are robustly designed for use in harsh and difficult environments such as mines, tunnelling, marine applications, steel works, railways, ports, bulk and container terminals.
The low voltage range starts at 15A and goes up to 660A, 15kV with electrical or mechanical interlocking.
They can be delivered in our own standard manufactured panels, including short-circuit breakers. A range of multi-pin outlets for control cables are also in the product range with a max of 50 pins and 15 Amps.
|
|
FCI offers a broad range of power connector solutions for power supply and backplane-to-card interfaces as well as cable assemblies for power distribution.
FCI understands the evolving market requirements for power connectors and continues to provide innovative and cost-effective power product solutions to address the challenges of increasing power density and facilitating airflow for thermal management.
FCI can provide the design engineer with end-to-end power solutions for chassis-based equipment designs. FCI is ready with the right power solution for you.
Power Supply Solutions
> PwrBlade® Connector System
> HCI™ Connector System
> Power Card Edge
Backplane-to-Card Solutions
> AirMax VS® Power Connectors
> Metral® High Power Connectors
> Metral® Power Connectors
Power I/O Solutions
> PwrBlade® Cable Assemblies
> Pwr TwinBlade™ I/0 Cable Assemblies
> D-Subminiature Power Connectors
> USB + Power
> Sofix® Power Connectors
|
|
The new SPeX connector, is an EX power connector (1000 V, 680 A) with ‘e’ increased safety enables the user to connect and disconnect heavy duty equipment simply and safely.
Designed for use in hazardous areas the SPeX is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). It offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment.
The casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents.
Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc.
The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check.
|
|
BradPower is a robust, scalable and easy-to-install power distribution system that does not require the specialized tools and labor typically associated with traditional conduit or raceway installations.
BradPower wiring systems modular components make installation faster, easier, and more reliable. BradPower products deliver the same unsurpassed performance and innovation the industry has come to expect.
The BradPower product line includes:
Cordsets and Connectors
Tees and Reducers
Receptacles
Disconnect Switches
Accessories
BradPower Solutions for food and beverage processors: To meet the unique needs of the food and beverage industry, we offer a complete range of specialized BradPower modular power components designed for use in food and beverage processing machines and automated cleaning systems.
|
|
ABPC Series. The AB Power Connector range of heavy duty electrical connectors is designed for general purpose use and to meet the requirements of power distribution in harsh environments.
The outer shell components are manufactured from a tough thermo-plastic to ensure full insulation and high corrosion resistance. Inner shell components are plated aluminium for strength and to provide electrical continuity for screening purposes.
The connectors feature bonded leading earth contacts and pilot pins for 'earth loop monitoring'.
The AB Power Connectors have contact arrangements suitable for both single or three phase power supplies.
The connectors are approved to specification CECC 75.201.007.
|
|
|
Amphenol is a technological leader in the design, manufacture, and supply of high performance interconnect systems for a broad range of industrial applications, including medical equipment, factory automation, heavy equipment, instrumentation, motion control, rail mass transportation, and natural resource exploration. Amphenol's core competencies include application specific industrial interconnect solutions utilizing integrated assemblies with flexible printed circuits as well as high power interconnects requiring a high degree of engineering and system integration. Our innovative solutions facilitate the increasing demands of embedded computing and power
|
|
FEATURES
* High performance #16 contact
* Mechanical polarized housings
* PCB, panel or cable mounting
* Optional positive latches and back shells
* Optional sequential contact mating
BENEFITS
* Rated to 30 amps per IEC512-3 test 5a
* Housings only mate one-way, ensuring proper circuit mating
* Product flexibility for a wide variety of system packaging
* Provides additional safety and security
* Up to 4 pin contact lengths can be specified to create Make First / Break Last and Make Last / Break First circuits
|
|
CAM
Circular connector in aluminium with handle locking system.
Used on very harsh environments.
Designed for intervehicle jumpers (dynamic applications).
From 4 to 61 poles, straight or angled plugs.
Features & Benefits
Nominal current : 10 to 500 A
Service voltage : up to 750 V
Temperature range : -40 degC / +100 degC
Endurance : > 500 mating cycles
Salt spray resistance : 96 hours (more on request)
Robust and many configurations available (signal and power)
Harsh environment use
Safe and easy locking system
Technology/ Coupling System
Environmentally Sealed
|
|
|
|
|
|
Lucy Switchgear has in depth knowledge in providing substation connectors up to 145kV and accessories.
Designed to interface with all associated products including circuit breakers, disconnectors, voltage transformers and sealing ends, our connectors are ideal for new build and refurbishment projects.
Connectors Key Features
Connections up to 145kV
Copper connections to ENA TS 41-16
Aluminium connections to ENA TS 41-11
Rigid to palm connector ref. RD-PALM
Rigid Connector to suit Copper/Aluminium Conductor to Flat Palm.
Number of clamps per connector dependant on current rating or mechanical requirements. Triple clamps only used for aluminium stranded conductor.
Angle of entry and splay to be advised at time of quotation or order.
Conductor clamps
- C14 to C75 clamps are electro tinned CZ122 brass
- A40 to A90 clamps are LM6 aluminium
- UC25 universal clamps are to suit copper or aluminium stranded conductor.
CZ122 brass/HE30T aluminium
- Transition washers will be used if aluminium clamps to copper support plate or brass/gunmetal clamps to aluminium support plate are required
|
|
|
Available in 2 through 24 circuits . Positive housing lock for secure mating retention Material PBT UL 94 V -0 .For free hanging or panel mounted
|
|
Winchester Electronics' new line of power snap-on style connectors have a snap feature for secure mating that does not exist on typical slide-on power connectors. PowerSnap connectors come in both SMT, thru-hole, and cable versions and are capable of carrying current up to 40 amps, depending on configuration.
Key features of PowerSnap connectors include:
- Snap feature for improved mating
- Current capacity up to 40 amps
- Pick-and-place, tape-and-reel versions for automated equipment
- Low mated-pair profile - enables power in tight spaces
- Custom designs based on your system requirements
- RoHs compliant
- SMT, Cable, and Thru-hole designs
|
|
|
|
|
|
Winchester Electronics is pleased to announce the release of our new Advanced 100-Amp female power modules, which provide a substantial increase in current-carrying capacity over 20- and 30-Amp connectors. These modules are stackable in design to accommodate all your power handling needs. Advanced Power Modules can be used in discrete applications as well. These next-generation power modules are backwards compatible with existing HD+ 4-row stiffeners, giving designers an easy method to upgrade system designs.
Winchester’s 100-Amp female power modules contain two rugged power contact assemblies - each rated at 50 Amps and mate to existing 30-Amp vertical and right-angle male blade power modules.
Winchester’s Advanced Power Modules are an extremely versatile board-to-board power connector system consisting of power, guide, and polarization modules. Backplane connectors are sold individually, while daughtercard modules can be mounted on an extruded aluminum stiffener and sold as a complete connector assembly.
|
|
OVAL POWER CONNECTORS
Available in both polarized and nonpolarized designs; the nonpolarized design permits reverse phasing in three phase applications.
Receptacles have terminal backs for easy wiring and are available with spring-loaded sealing covers. The heavy-duty castings can be either panel mounted or furnished with a wiring box. Mating male and female plugs molded to standard lengths of cable are available with or without safety chains to prevent accidental disconnect.
Ovals are molded to various standard lengths of neoprene jacketed cable.
|
|
|
|
|
|
Self-Contained Power Connectors from Molex are used to splice and tap solid and stranded non-metallic sheathed cable. The connector family supports two and three conductor plus ground circuits for AC power applications. The product line features insulation displacement contacts which provide wire termination without the need to pre-strip the wires. The splice connectors are used to splice two cable segments together and replace butt connectors, wire nuts, and junction boxes used in traditional splice applications. Tap connectors operate in similar fashion and are used to support taps of existing cable segments to create new branch circuits.
Features and Benefits:
A double-latching system provides positive connection security when required, but is fully releasable so the connector can be mated and remated as needed during the manufacturing process
Once the connector is closed, the strain relief is automatically set into place so screws and human factors are not a worry
No special tools required, just pliers
Large markable surface area on housing allows for easy circuit identification, eliminating circuit mix-up
Double insulation displacement contacts provide maximum conductivity and reduce voltage drop to a bare minimum
|
|
|
|
Electric power-supply connectors: 
