|
|
Advanced designs and manufactures hundreds of RoHS Compliant screw-machined terminals for our high quality sockets, adapters, and connectors. Advanced also offers a complete line of EMC® insulated and non-insulated terminals and test jacks for RoHS Exempt applications.
RoHS Compliant terminals are compatible with lead-free processing - select either Matte Tin(M) or Gold(G) plating
|
|
Our new LV Series charging connectors represent the
consistent further development of our well-established
connectors of the LB and LB-L series.
LV Series connectors exceed the requirements of standard
EN 1175-1 and meet all current demands of manufacturers
and users of modern battery-powered machines and
systems, such as materials handling and lifting vehicles,
vehicle batteries, battery chargers, and backup systems
of uninterruptible power supplies.
The charging connectors are also available with the
option, as patented by Schaltbau, for batteries featuring a
commercial electrolyte circulation system.
Used with your products, our charging connectors ensure
the highest reliability and safety in any application under
harsh environmental conditions. Resistant to shock and
vibration as well as to the effects of dust, most acids,
alkalis and vapours, our charging connectors are designed
for daily use and have stood the test millionfold. A wide
range of accessories is available
|
|
FEATURES
* Streamlined design
* 3 hexagonal voltage coding pins for wet, dry/gel and air supply
* 2 main contacts, 4 auxiliary contacts, voltage key and air supply
BENEFITS
* Low mating forces and optional latching available
* Coding pins marked for 24V, 36V, 48V, 72V, 80V, and 96V provide additional safety and prevent cross voltage mating
* "A" series for American wire gauge cable
* "E" series for metric cable - intermatable with European competitive products
|
|
Laird Technologies’ standard precision electronic contacts ground, carry current and signals, and interconnect boards and devices.
Laird Technologies offers a wide choice of plating options for maximum electrical current carrying performance.
Laird Technologies has a wide array of designs in standard formats that are ready for production. Installation costs are lower with tape and reel packaging.
|
|
Your battery set is not complete without a proper connection with the electrical board system. Mastervolt supplies battery terminals, which can be combined with covers, to connect your batteries safely.
Battery terminal (bolt) (M12) (negative)
Battery terminal (bolt) (M12) (positive)
Battery terminal 'type A' (flat) (double) (negative)
Battery terminal 'type A' (flat) (double) (positive)
Battery terminal 'type B' (nut) (M8) (negative)
Battery terminal 'type B' (nut) (M8) (positive)
Battery terminal 'type C1' (flat) (positive)
Battery terminal 'type C2' (flat) (negative)
Battery terminal 'type D' (bolt) (M10) (negative)
Battery terminal 'type D' (bolt) (M10) (positive)
|
|
* up to 37 pins
* mA - 25 A
* Up to 500 V AC and 130 V DC
* Data and signal transmission
* Connectors with combined control and power contacts
* Automatic IP66/67 watertightness when connected without additional manipulation being necessary
* Silver butt contacts for optimum current transmission
* Housing made of glass-fibre reinforced polyester,
highly resistant to chemical agents, UV radiation, shocks,...
or made of anti-corrosion treated metal,
providing high-temperature resistance and excellent mechanical resistance
* 5 different keying positions
* IEC/EN 60309-1
* In compliance with the European Low-Voltage Directive
|
|
|
So far, the WINSTA® range of connectors for building installation has consisted of 3, 4 and 5-pole plugs and sockets, including pre-assembled connecting and interconnection cables as well as various pluggable distribution connectors and distribution boxes – for standard wiring applications in building installation technology. For improved communication, the WINSTA® family now has names hinting on the model or application.
|
|
From September 2008 Cabur products include a new family, CaburSolarLine, a full set of solutions for connections in photovoltaic systems. This product line has been designed to optimize connections between photovoltaic modules and some of the most common inverters on the market.
The product line includes connectors, cables, crimping tools and two practical "first installation kits", packaged in a professional toolbox.
|
|
Wiring solutions for photovoltaic power systems, IP 65/IP 68
Pre-assembled, tested and ready-to-plug solutions, connecting cables with overmolded connectors with protection degree IP 68, module connection boxes in IP 65. For direct current up to 35 A.
|
|
The components of the MC-Plug connector system for photovoltaics are designed to permit time-saving, dependable series and parallel cabling of solar modules which are integrated into buildings and free-standing.
MC-PV Plug connector system permits pre-assembly of the PV modules at the factory or in a site workshop. The equipment from the inverter to the module can be installed quickly by skilled construction workers.
Benefit: Installation costs for these modules are cut sharply.
|
|
|
|
|
|
Winchester Electronics' new 47-position CompactPCI® Power Connectors are designed to the requirements of PICMG® Power Interface Specification 2.11 R1.0 for use in connecting CompactPCI pluggable power supplies to backplanes in subrack equipment based on IEEE 1101.1, IEEE 1101.10, and VITA 30 packaging specifications.
The PICMG Power Interface Specification recommends using 47-position power connectors in all new CompactPCI system designs, superceding prior practices incorporating either similar looking 38-position connectors or DIN 24+8 Type-M power connectors.
Typical CompactPCI system packaging requires right-angle male connectors to be mounted onto daughtercards (free boards) and vertical female socket connectors to be mounted onto backplanes (fixed boards.) Systems containing 3U power supplies utilize one mated pair, while systems containing 6U power supplies use two mated connector pairs.
The 47-position CompactPCI Power Connector provides both versatility and performance through its combination of DC and AC power contacts.
|
|
We manufacture earthing tapes and braided connectors in large and small quantities in standard designs as well as according to our
customers wishes. Different materials are at your disposal:
braided copper tapes
round stranded copper cables
PVC-insulated-copper cables
PVC-insulated braided copper tapes
silicone insulated copper cables
TPE-U insulated copper cables
welding cables and earthing ropes
braided stainless steel ropes
braided aluminium tapes
|
|
|
Land cables that are buried into the soil are subject to pulling forces and mechanical impact, expecially during the laying of the cable. Therefore, specifications in certain countries (e.g. U.K.) prescribe the use of heavily galvanised armouring wires around the cable, thus increasing the cable's operational safety and life time. Bekaert is a reknown supplier of low carbon land cable armouring wires from its various factories all around the world .
|
|
-Quickly connected
-Available with or without fuse
-Clip fixing
The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps, measuring devices, soldering irons etc.
The unit is available with and without fuse and in many world socket standards.
Approvals: UL File Nr. E 222026
|
|
This latest generation of industrial plugs, connector and socket oulets extends and completes the comprensive range of SCAME' s plugs and sockets. Completely new and internationally patented technical and constructional features have been added to the EUREKA Series.
These features, illustrated in the following pages, are of course joined to higt quality functional characteristics, reliability, safety and a long life in even the most exacting operating conditions.
Anoutstanding advantage of the EUREKA Series plugs and sockets - and one which distinguished it from all other plugs and sockets manufactured up to this time - is the extraordinary ease and speed with which the contacts can be cabled and inspected.
Using EUREKA Series plugs and sockets is therefore,higly recommended wherever the electrical contractor considers quick and easy cabling and frequent inspection of the contacts to be very important factors in the installation work.
|
|
SCM series
Socket outlets
Rectangular cut out - 27X12
ENEC electrical rating up to 10A
Italy socket
Suitable for bathroom furniture as further plug
Room temperature: 85 °C
|
|
Halogen Free Bayonet Lock Connector
ABCIRH - Halogen Free Bayonet Lock ConnectorABCIRH Series. The AB Connectors Industrial Range is a development based on the ABB MS Series.
To minimise wear caused by vibration and frequent coupling, the bayonet lock coupling method features stainless steel pins at the critical wear points on the cam track of the fixed connector. The connectors are supplied with low fire hazard halogen free insulators as standard. This material has been independently tested to the most stringent requirements.
ABCIRH connectors meet all the electrical, mechanical and environmental requirement of BS9522-F0032 and VG 95234.
A range of accessories is available which meet the requirements of industrial applications including those of the Mass Transport market.
|
|
UIC568
Pull apart circular connector with painted aluminium socket with automatic cover & composite plug.
Audio coupler connection for rolling stock.
- 1 receptacle shell with removable insert equiped with 13 or 18 crimp contacts for UIC 568 or UIC 558 cables.
- 1 plug with removable insert.
- 1 dummy socket.
Features & Benefits
Nominal current : 5 A
Service voltage : 110 V
Test voltage : 2000 V
Salt spray resistance : 96 Hours (more on request)
Temperature range : -40 degC to +120 degC
Protection Index : IP67 according to EN 60 529
Endurance : > 500 coupling cycles
Pull apart connector
Fire behaviour : following NF F 16-101 & NF F 16-102
RoHS compliance
Standards and Quality Approvals
UIC 568 and UIC 558 standard compliance
SNCF approval
DB approval
SNCB / NMBS approval
TRENITALIA approval
and other networks in Europe
|
|
High quality and competitive price:
KINTO is one of the leading suppliers in China specialized in manufacture of copper parts for electrical applications.
Product range:
- copper flexible connectors made out of copper strips
- copper flexible connectors made out of baided tapes or stranded ropes
- flexible insulated busbars
- primary copper contacts (contact fingers, contact blades, tulip type contacts, bell type contacts, sleeve type contacts,...)
- primary copper connectors
- copper clamps and other customer copper parts
We use technologies such as press-/diffusion welding, braze welding, cold-pressing, stamping, deep-drawing and high precision machining.
The contact areas can be zinned or silver-coated according to customers' requirements.
We are a ISO9001 certificated company with strict quality assurance system, and we have advanced production and testing equipments to assure the quality of each product.
|
|
Hypertac presents its new range of spring loaded contacts Hyperspring which benefits from the superior performances of the hyperboloid socket technology. The range includes power, signal and coaxial contact requirements.
The Hyperspring contact can be integrated into any connector where high reliability is required in harsh environment applications such as military equipments.
|
|
Contact Systems for the Distribution of Electrical Power
Together with customers PLANSEE develops complete contact systems which are used in circuit breakers up to 800 kV and breaking currents up to 63 kA.
Comperative stress according to Mises [MPa] - Calculated stress distribution in a tulip contact The entire development work and fabrication includes design of materials and prototyping to serial production of complete components.
Advantages:
* Choice of optimized manufacturing processes
* Utilisation of low cost joining technologies
* Reduction of the number of components
Forms of delivery:
* Design and manufacturing of contact systems made of WCu and Cu for the medium and high voltage range
|
|
SIG
Nickel plated brass circular signal connector.
Specially designed for signalling fixed equipments.
Locking system with padlock or bolt.
2 shell sizes with 8 and 14 contacts.
Gold plated crimp contact AWG16.
Features & Benefits
Nominal current : 15 A
Nominal voltage : 400 V
Test voltage : 3000 V
Protection index : IP68 according to EN 60 529
Temperature range : -40 degC / + 100 degC
EN 50125-3 standard compliance
RoHS compliance
Standards and Quality Approvals
UK Railtrack agreement
Technology/ Coupling System
Environmentally Sealed
|
|
|
3M™ Scotchlok™ Electrical Spring Connectors Y, R, G and B are the original color-coded wire connectors with a unique soft shell that is easy on the fingers.
|
|
|
|
|
|
The Ex plug-and-socket connector "mini CLIX" from R. STAHL is especially uncomplicated and can be used in a multitude of applications. It's possible to carry installation and maintenance tasks in Zones 1 & 2, 21 & 22 without first obtaining "hot works" permissions. Hot Swap - plug-in and plug-out while energized - is now even possible for non-intrinsically-safe circuits. Can be used even for fieldbus installation because of the high transmission rate of 100 MBit/s.
Handling:
safe, fast disconnection under load
no specialist personnel required
no hot work permission required
coded to prevent confusion
Cable terminal:
crimp terminal or spring clamp terminal
direct connection via led-out single conductors
option for connection of armoured cables
Data transmission:
up to 100 MBit/s
perfectly shielded
option for additional power supply
Advantages:
suitable for high data rates
can be installed and maintained conveniently
no need to switch off the entire fieldbus system in the case of repair
easy modification and conversion
y-adapter for looping through data and power supply lines
Flexibility:
clear, fast installation
modifications to the connections or terminals can be made at any time
option for extension of electrical installations during operation
easy disconnection of individual areas
Installation:
simply screw into existing openings and wire
|
|
* Maximal current: 680 A
* Maximal operating voltage: 1000 V AC / 1000 V DC
* Wiring with a crimping lug (185 - 240 mm2)
* Closing and opening of the pilot circuit by electromechanical interlocking device (microswitch) when plug is connected/disconnected
* Five non-interchangeable positions for L1, L2, L3, N and E
* Equipped with silver-nickel butt-contacts for added reliability and lifetime
* At least 2000 operations can be performed
* Automatic IP65/IP66 ingress protection as soon as the plug is connected
* Casings made of fibreglass-reinforced thermoplastic material providing excellent resistance to mechanical impact (IK08)
* Excellent resistance to most chemicals agents and UV
* ATEX 94/9/CE and 99/9CE directives
* EN 60079-0, EN 60079-7, EN 61241-0 und EN 61241-1 and
* Normen IEC 60079-0, IEC 60079-7, IEC 61241-0 and IEC 61241-1
|
|
|
|
|
|
Temporary but safe disconnection of power is critical in many industries. To meet this requirement Hawke International has introduced a new series of EExd Connectors that are ATEX approved, easy to use and exceptionally robust. They permit the safe and rapid service, repair and replacement of key plant, or provide quick connection to temporary equipment. Their application is beneficial in capital-intensive processes where minimum downtime is essential.
The new connectors are ideal for Zone 1 and Zone 2 explosive environments commonly found in oil and gas exploration, production and process plants. However, their features also offer benefits in Zone 21 and Zone 22 explosive dust environments, or in harsh and hostile non-explosive applications.
In compliance with the ATEX Directive (94/9/EC), the new design retains many of the best features of Hawke's previous connector range, but in addition adds innovations based on user feedback. The heavy duty, maintenance free stainless steel body construction is retained, along with the acclaimed Acme mating thread; enabling quick connection whilst preventing thread binding or galling.
|
|
revos Ex
In hazardous areas such as in mining or the chemical industry electrical components have to cope with special requirements. The revos EX series provides industrial multipole connectors especially for those systems where Ex protection is crucial. The BVS testing institute approved revos EX in zone 1 for intrinsic circuits.
|
|
|
|
|
|
Because of permanent injuries risk in industries, there are more health and safety requirements in harsh environments. Marechal decontactors (DXN, DX, SPeX) comply with ATEX Directives 94/9/CE and 99/92/CE required for these areas.
Thanks to their explosion proof casings and their “de” protection mode, they can apply in explosive atmospheres in zones 1 & 2 (gas) and zones 21 & 22 (dust). Their safety load break switch capability allows a disconnection up to 63 A without any electrocution hazard for users.
The DXN decontactor is EX approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). It offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Its casing made by glassfibre-reinforced polyester affords an excellent mechanical protection (IK08) and resistance to extreme temperatures (-40 °C to +60 °C). From 20 to 63 A, it can be used for mobile gensets, ship-to-shore supplies, offshore platforms etc.
Main applications are for supplying machines and equipments in explosive atmospheres as Chemical industries, Grain silos, Petroleum, Plastic, Fertilisers, Wood, Cosmetics and perfumes, Alcohol and spirits, Pharmacy ....
|
|
The plug and sockets series SolConeX and CES comply with IEC/EN 60309-1/-2 (CEE) and European standards EN 50014, EN 50018 and EN 50019. The ability to plug the Ex-plug into non-Ex sockets is guaranteed, while operation of the Ex-socket using a non-Ex plug is reliably prevented.
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
Certified for gas and dust explosion protection
Type of Protection IP 66
Optimal contact by means of laminated contacts
Individually encapsulated pins, flexibly embedded
Switches with large handle, can be locked in 0 and 1 position indication, with motor switching capacity AC3 acc. to IEC 60947-3, with auxiliary contact for control and signalling purposes
|
|
|
|
Electric power-supply connectors: 
