|
|
Switch & Fusegears
SAFECLIP Fuse Holders provides economies in cost, size and installation time.
|
|
The Fuserbloc CD's mean that SOCOMEC has a wide range of fuse switches on the market
The Fuserbloc CD's incorporate functions which make them simpler to fit and use.
Application:
Load-break and protection for low voltage installations and equipment
The range consists of:
25A - 32A - 50A – 63A – 100A – 125A – 160A – 250A – 400A – 630A – 800A – 1250A
Original features and advantages:
The Fuserbloc CD's can meet all the requirements of installers and users:
- The same product reference can be operated from the front, from the door or from the side
- The range includes the "Test" function as standard, so that auxiliary circuits can be tested without connecting the power.
- A patented system gives the customer the option of front or rear connection for the equipment.
- Modular design so that 2-pole products can be used in DC installations together with 6, 8, 12 etc. pole equipment so that several loads can be controlled with the same handle
|
|
Fused isolator switches from 32 to 1250 A
Description
For NFC or DIN, BS, UL type fuses
3 or 4-pole
For direct operator, external front-mounted and RH side-mounted operators, external LH side-mounted operator
Robust and compact handles : padlockable using up to 3 padlocks, lockable, with door interlock, black/grey or yellow/red, IP65 or IP55
Auxiliary contacts:
» Two early break and “O” and “I” position signalling auxiliary contacts, configurable and common throughout the range (GS1AM110 and GS1AM101)
» Auxiliary contacts GS1AN suitable for isolation. Reversibility of these contacts to convert a N/C contact to a N/O contact and vice versa
» Off-load control circuit test facility, with auxiliary contacts GS1AM110, GS1AM101 or GS1ANT used in conjunction with handles GS2AHT
» Auxiliary “blown fuse” signalling contacts.
|
|
|
|
|
|
Fuse switch-disconnectors from 32 A to 800 A
Description
Nominal current from 32 to 800 A
Voltage rating up to 690 V (AC) and 750 V (DC
3 and 4 pole version
Test position
Indication by fuse operating mechanism
Positive contact indication
Fuse compartment with IP20 protection by insulating covers as standard
Locking device to prevent access to fuses when the switch is in the "ON" position
Upstream-downstream double insulation
Reversed power supply
Compliance with standards IEC 947-1,-3,-5, EN 60947-1,-3 and -5, IEC 60269-1 to -4, EN 60269-1 to -4, BS 88-1 to -4, DIN 43620, NFEN 60269-1 to -4, NFC 63220
Specificity of the INF family:
Nominal current from 32 to 800 A
Nominal current from 32 to 800 A
Available in 7 sizes
Can be used for all NFC, BS, DIN fuses
Specificity of the ISFT/ISFL family:
Nominal current from 100 to 630 A
3 sizes in ISFT (100, 160, 250-630 A)
2 sizes in ISFL (160, 250-630 A)
Several installation types: mounting plate, DIN rail (ISFT) or on busbar (ISFT/ISFL)
Connection by cables or on busbar
|
|
|
ELECTRICAL POWER DISTRIBUTION: ETI provides high-quality solutions for the protection of low and high-voltage electrical installations in the field of electric power distribution. We supply a wide range of high-voltage fuse-links of the type VV, low voltage power circuit brekares ETIBREAK, distribution cabinets KVS, medium voltage surge arresters ETISURGE and ceramic as well as polymeric insulators.
|
|
These fuse links are intended to protect high-voltage distribution networks and transformers according to the International Standard IEC 60282-. They are of current-limiting type and for indoor as well as outdoor use.
The line is made by:
· Back-up fuse links with or without CPD (Controlled Power Dissipation),
· General Purpose type fuse links.
The line lies between 3/7.2 kV and 20/36 kV of rated voltage.
Two ranges exist in this line :
· International range complying with IEC 60282-1,
· German range complying with IEC 60282-1 (VDE 0670 T4) as well as VDE 0670 T402.
The Controlled Power Dissipation (CPD) from Ferraz Shawmut is driven par power dissipation and not only by temperature. While operating faster, it avoids high temperatures especially in SF6 switchgear. The mechanism of the CPD actuates the ‘medium’ type striker of the fuse link. In that case a combination with a switch is required.
|
|
The 458 Series Nano2® Fuse is an ultra-small, square surface mount fuse designed to support a variety of space constrained overcurrent protection applications. Offering a 1206 size footprint, it is the smallest wire-in-air type surface mount fuse offered by Littelfuse.
Features:
Surface Mount Fuse
Fully compatible with lead free soldering profiles
RoHS Compliant
Halogen Free
Available in ratings of 1to 10 Amperes
Applications:
Notebook PC
LCD backlight inverter
LCD Panel
DC/DC converter
Battery Pack
Car Navigation System
Network Equipment
Telecom Equipment
Electronic Signage
Portable Consumer Electronics
|
|
|
RESIDENTIAL AND COMMERCIAL ELECTRICAL INSTALLATIONS: ETI provides high-quality and integral solutions for protection of electrical installations in buildings. We supply all kinds of type D, D0 and C fuse-links, as well as MCB's and various types of residual current protection switches from ASTI group. In our sales program you will also find various types of switches and supervision & control devices of EVE group. Very important is also overvoltage protection ETITEC. All together shall be built, of course, into a distribution cabinet DIDO of your choice.
|
|
Ferraz Shawmut offers you the benefits of a truly global supplier from the one-stop-shopping advantages of our complete line of European and North-American fuses, holders and accessories.
Modulostar®, Lindner® and Blue Dot® are brand names for fuses and fusegear complying respectively to NF, DIN and BS88 standards. Space-saving, modular, modern-day design, reliability are the key words for these lines. To limit drastically short-circuit current and downsize overloads while providing easy installation and complete safety for the operators only one spot: Ferraz Shawmut.
|
|
|
ELECTRICAL POWER DISTRIBUTION: ETI provides high-quality solutions for the protection of low and high-voltage electrical installations in the field of electric power distribution. We supply a wide range of high-voltage fuse-links of the type VV, low voltage power circuit brekares ETIBREAK, distribution cabinets KVS, medium voltage surge arresters ETISURGE and ceramic as well as polymeric insulators.
|
|
|
Ferraz Shawmut is involved in the medium voltage protection from many years. The expertise is centered on the protection of the MV/LV transformer in the power distribution networks with solutions encompassing medium voltage Limitor® fuses for overhead lines protection, oil-tight medium voltage fuses fitting the transformer tank and fault indicators especially the Nortroll® products. Our medium voltage solutions concern also the industrial field with both North-American and European (DIN) standard medium-voltage motor protection fuses. The offering covers also the protection of potential transformers and medium voltage capacitors.
|
|
|
Ferraz Shamwut is global leader for fuse-based electrical protection solutions. Miniature fuses are part of the offering. This international range of miniature dimension fuses offers you all the protection you require with convenience fuses essentially glass-type fuses as well as high-breaking capacity and low I2t fuses with ceramic body all within the popular footprint 5x20 and 6.3x32 mm.
|
|
The 369 series in its compact TE5® package provide an ideal alternative over glass cartridge fuses in electronic ballast application, especially where PCB board space is limited.
The 369 series radial leaded fuses are rated at 300VAC as compared to existing competition in the market which are rated at 250VAC.
In addition, it can either be directly soldered or used in conjunction with plug-in holder. And its Tape and Ammo-packaging are ideal for high volume production.
Features:
Offer adequate circuit protection at high operating voltage
Help to optimize the use of limited PCB board space
UL and CSA agency approval
Application:
Electronic Ballast
|
|
Miniature fuses serv to main purposes:
a) To protect components, equipment and people from risk
of fire and shock risk caused by overcurrents.
b) To isolate subsystems from the main system once a fault has occurred.
|
|
|
|
|
|
NV KOMBI advantages
ETI is introducing a new generation of low-voltage fuse-links from size NV00C up to to NV3 with new, dual indication
of fuse-link operation, called KOMBI. The indicator is easily visible on the top and centre of the fuse link, whether it is
situated in a standard fuse base or vertical fuse rail or in fuse-switch disconnector.
The most important advantages of NV/NH KOMBI fuse-links:
- High breaking capacity, 120 kA
- Rated voltages: 400V a.c., 500 Va.c., 690V a.c. and 1000V a.c and up to 440V d.c. In case of use in d.c. voltages,
consultation with ETI technical team is recommended.
- Two versions of covers: aluminium, when the removal tag is under voltage and plastic, when insulated metal
removal tag is incorporated into the plastic cover
- VDE certificates and CCA/CB test reports
General about NV/NH fuse-links
Theirs dimensions correspond with DIN 43620, other technical characteristics correspond with the requirements of the
following standards:
- Rated voltage 400V/500V/ IEC 60269-1:2005 / EN 60269-1:1998+A1:2005 IEC 60269-2:1986 Corr.1:
690V/gG/gL: 1996 A11995 A2:2001 / EN 60269-2:1995 A1:1998 A2:2002 IEC
60269-2-1:2004 / HD 60269-2-1:2005
- Rated voltage 690V/aM: VDE 0636-2011
- Rated voltage 400V/gF: PN-IEC 60269-2
- Rated voltage 400V/gTr: VDE 0636-2011
|
|
Ferraz Shawmut offers you the benefits of a truly global supplier from the one-stop-shopping advantages of our complete line of European and North-American fuses, holders and accessories.
Modulostar®, Lindner® and Blue Dot® are brand names for fuses and fusegear complying respectively to NF, DIN and BS88 standards. Space-saving, modular, modern-day design, reliability are the key words for these lines. To limit drastically short-circuit current and downsize overloads while providing easy installation and complete safety for the operators only one spot: Ferraz Shawmut.
|
|
RADIAL MICROFUSES
Format: cylindrical or parallelepipedo
Dimensions: diameter 8,35x7,7mm
Capacity: from 50mA to 6,3A-250Vac
To be able of interruption: 35A@250Vac and 100A@277Vac (cURus)
Fusion: fast or delayed
Norms: cURus, CSA, CE, CCC, VDE, SEMKO, PSE
MICROFUSES SMD
Dimensions: from 1,60x0,79mm to 9,65x3,05mm
Capacity: from 250mA to 15A- 32,125,250 and 600Vac
To be able of interruption: from 35A and 300A
Fusion: fast or delayed
Norms: cURus, cULus, CSA, CE
|
|
|
|
|
|
SMD FUSES FF 470
The Bussmann SMD Tron is designed to EIA-PD-100, DWG SOPM-7243.
A high temperature body material is capable of surviving a 60 second exposure to a temperature of 215°C. Because the SMD Tron is totally sealed, it can be subjected to cleaning by a wide variety of aggressive solvents.
PICOFUSES PF 257
The PF 257 fuses are designed to safely interrupt 50A at 125V ac. This excellent performance is achieved at power factors as low as 97%. Competitive components claim similar short circuit interrupting ratings, but at 100% power factor - a condition that rarely exists in real world applications. In addition PF 257 fuses are capable of interrupting a 300A fault at 125V.
MICROFUSES FF 785
At 250V ac, the 0.5 to 3A PC-TRON can safely interrupt 50A; at 125V ac, the 0.5 to 5A versions can interrupt 10.000A.
This high breaking capacity makes the PC-TRON subminiature fuse ideal for line-side protection of power supplies.
CYLINDRICAL FUSES CT 515
5x15mm glass fuses are available with axial leads. The fuse is available with an optional sleeve of flexible fluoropolymer (UL flammability rating VW-1). The tube will self-extinguish within one minute.
|
|
|
ULTRA QUICK - SEMICONDUCTOR PROTECTION: ETI fuse-links for semiconductor protection ULTRA QUICK present an optimal solution for protection of power semiconductors, such as diodes, thyristors and other power semiconductors in DC and AC power applications such as AC/DC, DC/AC, DC/DC converters and frequency converters. ETI fuse-links elements for semiconductor protection comply with IEC 60269 and VDE 0636 standards.
|
|
FUSE AUTORIPRISTINANTE FROM PRINTED CIRCULT
Capacity: from 0,05A to 14A
Voltage: from 6Vac to 265Vac
Norms: UL, CSA, TUV
FUSE AUTORIPRISTINANTE SMD
Capacity: from 0,05A to 18A
Voltage: from 15 (6) Vac to 600Vac
Norms: UL, CSA, TUV
|
|
Features
Radial leaded devices
Very high voltage surge capabilities
Lead-free and compliant with the European Union RoHS Directive 2002/95/EC
Agency Recognition: ULCSATUV
Applications
Customer Premise Equipment
MDF modules
Network Interface Devices
Base station
Power supply
|
|
|
ULTRA QUICK - SEMICONDUCTOR PROTECTION: ETI fuse-links for semiconductor protection ULTRA QUICK present an optimal solution for protection of power semiconductors, such as diodes, thyristors and other power semiconductors in DC and AC power applications such as AC/DC, DC/AC, DC/DC converters and frequency converters. ETI fuse-links elements for semiconductor protection comply with IEC 60269 and VDE 0636 standards.
|
|
Ferraz Shawmut is well renowned for power electronics fuses. Protistor® is definitely recognized worldwide as the must. Protistor fuses' performances are ever unmatched till now. It's a combination of drastic current limitation, low provided I2t level (a key factor regarding the protection of power semiconductor), reduced power losses.
Protistor® line encompasses Form 101 round fuses for North-American market, ferrule-type fuses and square-body PSC fuses especially for large current ratings.
This line is supported by world-class design, manufacturing and testing capabilities as well as strong and educational assistance by technicians and experts.
Select-A-Fuse/Power Electronics is a program for selecting the appropriate power electronics circuit protection. It's the proof of our comprehensive knowledge in this field.
|
|
Protistor means unmatched performances in the field of power semiconductor protection
gS class (as defined by the EN 60269-4 standard) means reliable I2t and protection against all type of overloads
NH standard (blade-style fuses) means the capability for installing in any type of NH fusegear: bases and holders, disconnectors, switch-disconnectors.
|
|
Technology: Fuses
Series: LVSP
LVSP Series - Surge Fuse For TVSS Protection. The Littelfuse Varistor Surge Protection (LVSP) Fuses are intended for the protection of TVSS products. The LVSP Series has been designed to survive the 8x20�s lightning surges described in various Standards(UL1449, IEC61000-4-5 & IEEE C62.41) without opening. This allows the TVSS to perform the necessary suppression. The LVSP Series is not rated for continuous current and the ratings are to specific 8x20�s surge capability. The LVSP Series can be used to facilitate TVSS module compliance to UL1449 in permanently connected applications (abnormal overvoltage, unlimited current conditions)
|
|
|
|
Fuses, Fuse holders
