|
|
| Following the state-of-the-art trend in automation for decentralized systems without cabinets MTM Power has designed the new series PM-IP67A with 50, 75, 100, 150 and 200 W. Remarkable feature of the primary switched modules is that they are suitable for applications with protection degree IP67 for different tasks in indoor and outdoor industrial applications. Without any additional protection against harsh environmental conditions these power supplies can be mounted and used just at the place where needed. The compact power supplies with AC and DC wide input range are designed for worldwide use and are available with single and dual outputs of 5, 12, 15, 24, 36, 48, ±12, ±24, ±36, ±48 and 12/24 VDC. Their dimensions are 166,0 x 85,0 x 35,0 mm and they are connected via 7/8" connectors. The devices are vacuum encapsulated, acc. to Protection Class 2 and comply with the Low Voltage Directives as well as with the up-to-date EMC Standards as regards CE Conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. The series PM-IP67A is short circuit protected, needs no ground load and is operating within a temperature range of -40 to 75 °C. |
|
The TEX-120 series is a range of sealed fieldpower supplies for applications in
harsh outdoor environment. The die-cast aluminium case is water-(incl. salt water), ice, dust and oil resistant to IP67 and NEMA4X requirements.
The construction is shock and vibration proof.The operating temperature range
is specified from -40°C to +85°C without any derating.
There are 2 models available with regulated 12VDC/8A and with 24VDC/5A output. The power supplies feature universal 90 to 264Vac input range and
have safety approvals including CB scheme, IEC/UL 60950-1 and UL 508.
The product is also certified to ATEX94/9/EC for class l, div.ll applications in
hazardous locations. |
|
Specifications:
Power:
Input voltage range: 90 - 264 VAC
Output voltage:
+5VDC @ 2A,
-5VDC @0.2 A,
12VDC @1 A,
-12 VDC @ 0.3 A
Input frequency: 47 - 63 Hz
Inrush current cold: 20 A @ 110 VAC, 40A @ 220 VAC
Hold-up time: 16 ms
Raise time: 500 ms
Overload protection: power limit
Short protection: auto- Recovery
MOSFET design
Built-in line filter
Meets FCC, CE, TUV
Meets UL478 and CS
Fast type FUSE 2A/250V
Bus Interface PC/104 Standard Compliant
Connector
3-pin AC input
6-pin DC output
Dimensions 90(L)x96(W)mm (3.54" x 3.78")
Weight 120g
Operating Temperature 0°C ~ 60°C |
|
| Factorized Power Architecture maximizes a power system by providing a high degree of system flexibility, superior power density, efficiency, transient response, and reliability. This new architecture is enabled by V-I Chip components: the BCM intermediate bus converter, the PRM non-isolated regulator, and the VTM current multiplier. These families of integrated power components provide new ways to create small, cost-effective, high-performance power system solutions. |
|
The B+K 1692 Switching Mode DC Power Supply provides high current output in a lightweight and compact package. It is suitable for a variety of uses, especially for powering DC operated mobile radio equipment on the bench. It provides a variable voltage output from 3V to 15V at 40A continuous operation. In addition a fixed 13.8 VDC output is also selectable by a slider switch. Switching mode power supplies have the advantage of lightweight and high efficiency when compared to traditional linear mode power supplies. The efficiency can exceed 80% under the best conditions. Advanced circuitry protects against overload and provides immunity from RFI. A bright red and green LED display provides for an accurate and highly readable indicator of settings.
Lightweight and compact
High efficiency
Current fold back circuitry with illuminated indicator prevents overloading the power supply
Over temperature protection circuitry
Over voltage protection prevents abnormal high output voltage
High RFI stability
Variable output 3V to 15V at 40A
|
|
Safety and reliability continue to gain increased importance in many industrial applications. The family of power supplies offers several solutions to increase the reliability and safety of the application. The N+1 redundancy modules provide a cost effective means for providing back-up power in the event the primary power supply fails. The "Buffer" module provides added reliability for conditions of "Brown-out" when input power is unreliable. The comprehensive line of Switched Mode Power Supplies accepts wide ranges of both AC and DC input voltages and has global certifications to meet worldwide single-phase and 3-phase application requirements. The line of Allen-Bradley Power Supplies has two distinct families the standard and Compact that are essential components for complete low voltage control solutions.
- Reliable Design
- Leading Edge Technology
- Reserve Power and Load Response
- Parallel Connection Compatible
The Allen-Bradley Bulletin 1497 Global Control Circuit Transformers from Rockwell Automation are designed to reduce supply voltages to machine tool control circuits, providing greater safety to operators. These transformers also isolate the control circuits from power and lighting circuits. They are especially designed to accommodate the momentary current inrush caused when electromagnetic components are energized, without sacrificing secondary voltage stability per NEMA ICS2-100. |
|
Fan-less power supplies for computer systems ATX and U1 form factors
Redundant power supplies
Fan, convection and water cooled
Chargers
Standard and custom products
Made in Germany |
|
Esispower provides several kinds of Switch Mode Power Supplies for specifics applications.
Esispower designs non-standart SMPS's according to customer requirements when it is not available in the standard product range. |
|
Features:
54 Models: 5 to 1000 Vdc, 3 to 900 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz and 60 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics PQ SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. PQ SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies. |
|
80 Models: 16 to 1000 Vdc, 20 to 4500 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics MS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. MS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies. |
|
39 Models ranging from 16 to 2500 Vdc to 40 to 7500 Adc
• Series and parallel master/slave operation
• High dielectric withstand: 2500 Vac
• All user interface circuitry referenced to earth ground
• OVT and OCT shutdown standard
• Automatic V/I crossover
• RS232 interface with SCPI commands
• Optional IEEE-488, RS485, and Ethernet programming
• Front panel potentiometers for stepless rotary control
• Front panel keypad and up/down control for digital control
• 100 memory states with front panel memory indicator
• Auto sequencing by time or external triggering
• Modulation with addition or multiplication
• Front panel calibration
• User friendly controls and indicators
• Remote Interface Software with self-teaching features
• Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
• High power factor |
|
80 Models: 16 to 1000 Vdc, 20 to 2700 Adc
FEATURES:
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics TS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. TS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies. |
|
LoPAC Family - AC-DC Switcher Power Supplies
The LoPAC family consists of three ultra low profile, fan cooled, switching power supplies that combine the advantages of power factor correction (PFC) with high power density. They consist of the PFC Mini, PFC Micro and PFC MicroS. |
|
The Model 9110 is a new type of power supply. Unlike conventional power supplies with fixed output ratings, the 9110 automatically recalculates voltage/current limits for each setting. The 9110 provides 100W output power in any Volt/Amp combination within the rated voltage (60V) and current (5A) limits. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
# Digitally controlled, mixed mode linear/switching DC power supply
# 10mV/1mA resolution over the full range
# Bright, easy to read display
# Very compact and lightweight
# Low ripple and noise
# High reliability due to OCP, OVP and OTP protection
# Output On/Off control
# Store and Recall 4 x 100 groups of preset Volt/Amp values |
|
The 9130 is a fully programmable triple output DC Power Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output. Each output is fully floating and outputs can be adjusted independently or connected in series or parallel to produce higher voltages or currents. The 9130 is ideally suited for applications in Electronic Test, Production and Service, where multiple independent DC supplies are required and bench space is at a premium.
# 3 independent, fully programmable and electrically isolated outputs
# Display & adjust Voltage and Current settings for all 3 channels simultaneously
# Flexible output configuration: Operate in series or parallel tracking mode
# SCPI compatible command set. Communicate via USB interface using the included USB to TTL Serial Converter cable
# RS232 interface cable, converting from RS232 to TTL, is optional (order IT-131)
# OVP (Over Voltage) and OTP (Over Temperature) protection
# Output on/off control
# Excellent stability and regulation
# Very compact foot print (rack mountable 2U x 1/2U)
# Application Software for front panel emulation and simple test sequence generation included
# 50 memory locations for instrument state storage & recall |
|
Our Power Supply with single to 4 channels and digital/analogue display series. Its high stability and enhanced linearity makes this regulated DC power supply significantly useful in where high performance and stable power sources are required. It is widely adopted for R&D, educational and industrial usage.
General Features:
- Single to 4 adjustable channels
- 0-30V voltage linearly adjustment
- 2 display for voltage and current
- Low noise and ripple (<1mV)
- voltage and current pre-set feature
- CV/CC mode auto change
- Full LOADING continuous operation over 16 Hrs
- Conforms to EN61010-1 |
|
Bench Top power supplies are recommended for research and laboratory use. They offer flexibility in terms of voltage range and output polarity. These are stand-alone units which all feature an output voltage display.
The PM20D and PM30D dual output supplies include a 4 digit LCD read out and low voltage (+-5V and +-12V) supplies. Lower cost versions, PM20S and PM30S offering only single polarity output are also available. All supplies in this range accept ac or dc input - referred to as universal supply input.
features :
- mains input
- output range up to 3000V
- low ripple
- positive or negative HV
- overload protected
- clear display of output voltage
- multi-turn set dial |
|
| KSI offers cap charging power supplies tailored to meet your needs by configuring modular designs that are already very close to your exact requirements. |
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
|
|
| In addition to the enclosure, the power supply plays a major role when it comes to the reliability and performance of an industrial computer. Take a look at the various power supplies for different applications, each with different capabilities and substantial safety features. |
|
The fleXPower range allows for simple configuration of a custom modular power supply with up to fourteen outputs. The chassis consists
of either ten, twelve or fourteen slots, and modules are either two or three
slots wide.
- 400-2400 Watts
- Industrial/IT & Medical Approvals
- Configurable for Fast Time to Market
- SEMI F47 Compliant
- Flexible Series & Parallel Capability
- Output Voltages up to 150 VDC |
|
The DP Series of switching power supplies utilizes advanced component
and circuit technologies to deliver the industry's smallest 200 Watt DC/
DC power supply. Built to meet 1U height considerations, the U-Frame
package measures only 3.30 x 5.00 x 1.50". DP200 models offer
48 VDC input with flexible output configurations and compliance to
worldwide safety and EMC standards.
Features include:
- 200W compact high-density models
- Active load current share
- 36-72 DC input
- Ruggedized U-Channel construction
- RoHS compliant
- Includes OR-ing diode for N+1 parallel operation
- International regulatory approvals |
|
| Powersolve are able to offer modifications to standard products and full custom designs to meet specific customer requirements, consult sales office for details or fill in the Enquiry Form above. |
|
|
|
AC / DC Power supplies
