|
|
| Products 121 to 150 of 259 |
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
Out of the plastic Boxes which are selling at present, it’ s abillty and working efficlency are most excellent, the competitive power is
much higher with the low price same as the level of steel Box.
The products were added the electromagnetic interference(EMI) and preventing substance of the static electricity, and the strong point
was given to the relevant mechanical protection of electricity, electron and etc.
The Uses are possible according to the size such as Small Terminal Box, Signal, Terminal and Pull, Control Box etc.
|
|
| Mechanical parts (punched, bended, stamped, pressed, turned, deep-drawn ...) and assembly components for switchgears such as spindles, spindle-nuts, handles, axis, pins, draw-out units, earthing switches, disconnectors, load break switches, oil dampers, interlock mechanisms and complete operating mechanisms box for vacuum circuit breakers ... |
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
PICCOLO range is especially designed to house push buttons, terminal blocks, motor starters and electronic devices. They are also ideal for mounting and protecting process control sensors and switches. PICCOLO range is available in polycarbonate and ABS.
Dimensions range from 110*80*65 mm to 230*140*125 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4X, 6, 6P, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 6, 6P, 12 and 13; UL 94 HB
|
|
Products Instruction
The protection degree:IP 66
The products are available for the installation of Terminal Substitution Rail,Button box,small terminal,Sigal,Relay and Sensor, Communication and joint Box etcD
Temperature range:-40degree~+80degree
ABS:Acrylonitrile Butadiene Styrene
PC:PolyCarbonate |
|
- Internal separation from Form 1 to Form 4B
- Fixed units (FFF)
- Removable units (WFD)
- Withdrawable units (WWW)
Different types of functional units can be mixed within the same assembly or section, in order to efficiently meet requirements regarding continuity of supply, service conditions or budgetary constraints. |
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating. |
|
MCE - Modular Component Enclosures offer easy-to-use and practical functionality, and are designed to house din rail mounted automation, control and switch gear components. MCE enclosures can be connected to each other with flange openings to build bigger panels. Cable entries are available in all sides. There are 5, 9, 14, 28 and 42 module options available as stock products. Bigger sizes available upon request.
PC: (MCE Control) IP 65; IK 08; UL-94 5V; UL 508
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications. |
|
Areta Multiple doors
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
Areta modular
Using the structure of a standard Areta cabinet it is possible to create modular internal systems for the LV Power distribution.
Specific mounting kits allow the fitting out of:
- Inner front with panels or doors including locking system with no extractable screw.
- Split cubicles adjustable in depth according to the different dimension of the devices to be installed.
The Areta modularity together with a special union system make possible the joining of different modules.
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating. |
|
Aisi 304 EN-14301 stainless steel cabinet. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. certificate NEMA 4x, by UL.
Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
Manufactured in Aisi 316 EN-14401 stainless steel
Controlled maximum door aperture
Bolts for fixing to floor
Anti-graffiti treated
Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336.
|
|
With our outdoor enclosures we construct cabinet systems, which have been weather tested and are extremely stable. The electronic components used outdoors are optimally protected from wind, rain, heat, cold and vandalism.
Schroff offer two standardised outdoor cabinets: "Modular" or "Unibody". Flexible assembly possibilities are possible with 19"" technology, ETSI or other non-standard accessories. With the EMC version, rubber seals or foam seals, which are combined with a metallic mesh, provide protection to IP55 which can be guaranteed. The seals can be replaced if they are damaged.
The cabinets conform to the guide lines and standards for shock and vibration and are tested to IEC 68-2-6 and -27, plus ETS 300 019 for safety during earthquakes. Climate control is tested to IEC 68-2-1, -2, -14. |
|
Aisi 304 EN-14301 stainless steel cabinet for street lighting. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
• Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
• Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
• Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
• Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
• Manufactured in Aisi 316 EN-14401 stainless steel
• Controlled maximum door aperture
• Bolts for fixing to floor
• Anti-graffiti treated
• Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336. |
|
A convex design to match the curves of the body is the characteristic feature of the ERGO-CASE range of cases.
As "bodycases" they for the first time make it possible for the user to wear the unit comfortably - whether on their arm, chest or waist.
The innovative design not only makes it easier to operate but also easier to read off. |
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories. |
|
With BOS-Streamline, BOPLA is introducing a new handheld enclosure whose innovative technology and ergonomic lines create new opportunities for use in the field of mobile data recording and processing. The constructive design permits parallel or inclined arrangement of the half-shells as well as lengthways or crossways use. The enclosure can also be used for graphic-capable displays or as a membrane keypad model with continuous membrane keypad. Depending on the design, ingress protection up to IP 65 is available.
In addition to ensuring ingress protection IP 65, the DI-D decor seal – available as an accessory – also provides an anti-knock function. If the customer does not require this decor seal, the IP 65 type with fitted round cord seal can be supplied. Individual power supply is guaranteed for all 3 basic sizes by means of the type with a battery compartment. Of course, all BOS-Streamline designs can be adapted to customers’ individual requirements by means of membrane keypads and displays as well as mechanical processing and printing. As a system supplier, BOPLA offers this all-round service up to the assembly of complete enclosures including electronic components. |
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture. |
|
| The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories. |
|
Self-extinguishing insulated boxes with double insulation. The bases and opaque lids are in PVC and the transparent lids in polycarbonate. Polished light grey surfaces to RAL 7035.
- Sealing gasket in all models.
- Lid fixing by lodking screws or hinges.
|
|
| Made of halogen free, impact resistant, self-extinguishing thermoplastic material. SCABOX junction boxes are designed for power distributionin outdoor installations and for housing relays, timers, connecting strips, etc. |
|
Descriputions:
TJ-MG wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS with standing harsh industrial and outdoor environments. Available with 3 mm double bit key. Hinges on short side. Standard unit includes cabinet base, door with gasket, hinges,
latches, back panel moun ting scrwes Waterproof and dust-free product which gets through strict quality inspections Proved quality in many reiated tests (IP 66) Convenient to use for console-alternative rail and button box, mini terminal,signal box, gauge/meter console, and communication connection box Temperature range: -40Ž ~+80Ž |
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
|
|