|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program the new DC/DC converter series URC for automotive applications. Due to the ultra wide input range of 14,4…154,0 VDC, the 50 W or 75 W converters can be operated at all standard battery voltages (24 / 36 / 48 / 60 / 72 / 110 VDC ±40 %) in railway vehicles acc. to EN 50 155 and in stationary applications. There are 8 different versions with single, dual or triple outputs available. The converters can be used for 19" rack or wall mounting with H15 connector and can be switched on and off by the enable input. Further features of the URC series are input and output voltage monitoring, high temperature range, high reliability and long life.
|
|
Absopulse Electronics offers a line of plug-in (Eurocard) DC/DC converters designed for railway and other harsh-environments. These units utilize field-proven topology to deliver any DC output up to 130Vdc. They can typically be operated from supply voltages of 24Vdc ((14.4–37V), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). Other inputs are available on request.
Absopulse’s line of plug-in (Eurocard) railway converters are designed to meet the requirements of EN 50155 for electronic equipment used on railway rolling stock. They also meet EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). The plug-in (Eurocard) series is rated for operation over a -25 to +70oC temperature range without derating, with natural convection cooling. Features typically include full electronic protection on the input and output, optocoupler, optional alarm output and optional control input. An optional built-in redundancy diode to allow for parallel connection to achieve higher output power or N+1 redundancy is available on most designs.
These compact plug-in modules are typically used in 19” rack-mount applications. They are heavily ruggedized and conformal coated and designed to meet IEC 61373 Categories 1 A & B shock and vibration standards.
Absopulse Electronics provides an extensive range of power supplies for operation in railway, industrial and other extreme environments in encapsulated or vented, chassis mount packages. If our standard designs do not meet your requirements, our engineering team will provide a cost-effective solution to meet your exact specifications. |
|
| The DC/DC power supply systems of the series MPG from MTM Power, the specialist for high-quality unparallely power supplies, are designed among others for different applications in transportation, telecommunications and the charging of lead batteries during stand-by parallel operation. The universally useable, modular and easy-to-scale system is based on the DC/DC converters of the series PCMD200W and PCMD400W which are proved in transportation applications. The series MPG2 is available with 2 plug-in positions and a total output power of 500-800 W and the series MPG3 with 3 plug-in positions and a total output power of 750-1.200 W. With different wide input voltage ranges between 14,4 VDC and 154 VDC, the devices supply an output voltage of 12, 24, 48, 72 and 110 VDC. The output voltage operates with UI characteristic curve. The system can be switched into an energy-saving stand-by operation via a remote control input. Further features are signalling of input and output voltage by an LED as well as a potential-free power good signal. The whole system is passively cooled by convection and is designed for an ambient temperature range of -40...+70 °C. |
|
FlatPAC-EN - AC-DC Power Supply
Small, versatile and flexible, the FlatPAC-EN can be configured with all standard VI-200 / VI-J00 and Maxi, Mini and Micro DC-DC converters %u2013 full, half and quarter-brick sizes. These modules cover the entire range of outputs from 1 to 100 Vdc and 25 to 500 watts, as well as an array of non-standard voltages.
LoPAC Family - AC-DC Switcher Power Supplies
The LoPAC family consists of three ultra low profile, fan cooled, switching power supplies that combine the advantages of power factor correction (PFC) with high power density. They consist of the PFC Mini, PFC Micro and PFC MicroS.
Javelin MIL-COTS PFC Power Supply
The Javelin is designed to withstand the extreme environments and stresses that are often inherent in military applications and industrial uses. Operating from single or 3%u2013phase AC lines, it provides a single output from 2 to 54 Vdc at up to 5,400 watts. |
|
This range of compact, modular, dc to dc power supplies is recommended where cost and space restrictions are important. The range has been designed with the needs of instrument manufacturers in mind.
Provision is made in the PS2001 and the PS3000 for continuous monitoring of output voltage and current.
A coaxial high voltage power lead, type RG174, is used in the PS2001 and PS3000. The lead can be fitted with a connector to your required specifications.
features :
- output voltage range up to 3000 V
- positive and negative versions available
- choice of 5, 12 or 24V input, depending on product
- internally or externally programmable
- excellent line load regulation
- input and output protection
- output voltage and current monitoring
- customised lead/connector option
- low ripple and fully screened |
|
MTM Power GmbH, the specialist for high quality power supplies, has designed the DC/DC converter series SMM50 for the use in vehicles, particularly for railway applications. These converters have an output power of 50 watts and are suitable for the stationary use as well as for the mobile use acc. to EN 50 155. The nominal input voltages are 24 VDC ((14,4…50,4 VDC), 48 VDC (28,8…100,8 VDC) and 110 VDC (43,2…154 VDC) and 230 VAC (85…264 VAC). Due to these input voltage ranges, the converters can be used in all on-board power systems. The output voltages are galvanically separated and are available as single, dual and triple versions. Further features are vibration and shock resistance acc. to IEC 68 T.2-27, high efficiency of 79...89 % and reverse polarity protection at the input. The devices are prepared for the use in 19" racks and have a H11 connector acc. to DIN 41 612. The dimensions are 173,0 x 38,7 x 111,2 mm or 177,0 x 40,2 x 128,4 mm (length x width x height). The series SMM50 needs no ground load, is short circuit protected and has various monitoring and protection systems.
|
|
| MPD offers a variety of units with isolation levels as high as 6,000 VDC. These 1W to 3W units are available in DIP, miniDIP, and now SMT (see our new LF100ESI and LF100EDI series below) packages with industry standard pin-outs. "Cost Cutter" products, including our new A100EHI, A200EHI and D100EHI series, offer the economy of very low prices without sacrificing performance. They are an ideal choice for applications that require compact size, high isolation levels and low cost. |
|
| The product family PMN/PCMN with low voltage input completes the range of primary switched MTM Power Modules. The modules offer input ranges of either 20/30...60 VAC or 18/30...72 VDC and allow - due to the different types available in this series - efficient solutions in numerous application fields. The vacuum encapsulated devices offer an isolation of 3,3 kVrms and comply to the up-to-date EN standards as regards CE conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. The series PMN/PCMN offers 10 and 30 W constant output power, is short circuit protected, needs no ground load and is designed for PCB-mounting (PMN) or chassis mounting (PCMN). |
|
VoltaLab instrumentation is ideal for DC and AC electrochemical analysis applications in corrosion, pitting tests, battery testing, fuel cells, electroplating, electrocatalysis, nano materials, coatings and sensor development.
It includes a range of potentiostats and current/voltage boosters as well as rotating disc electrodes, electrochemical cells and electrodes.
|
|
1U High, 48VDC at 1200 Watts with PFC and Hot-Swap
- 1500VAC Output Isolation
- Meets IEEE 802.3af
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap or Chassis Mount
- 48VDC Output at 25A
- I²C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 15 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Lengths
- ORing Diodes on Output
- 1U, 19" Racks Hold 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- PoE - Power Over Ethernet |
|
Javelin MIL-COTS PFC Power Supply
The Javelin is designed to withstand the extreme environments and stresses that are often inherent in military applications and industrial uses. Operating from single or 3-phase AC lines, it provides a single output from 2 to 54 Vdc at up to 5,400 watts. |
|
Model ORION-D3002DDP
300W -48V & 24V DC input DC/DC PS/2 ATX power supply
Mini-redundant DC to DC power supply suitable for 2U and larger chassis
Active PFC, full-range input
-38 V DC to 72V DC output for telecommunication applications
Test equipment for telecommunication applications
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-3002
300W PS/2 hot-swap redundant power supply
Mini-redundant power supply suitable for 2U and up chassis
Max. +5V standby output is 2A |
|
Absopulse Electronics’ RWY Series of encapsulated DC/DC converters are designed for operation in railway, industrial and other harsh environments. These designs are based on field-proven topology with excellent track-record in hundreds of applications. Typical input ranges available are 24Vdc (14.4–37V range), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). RWY designs for almost any output power requirements from 15W to over 280W are available, with either single or dual outputs.
The RWY Series power supplies are designed to meet the requirements of EN 50155 for electronic equipment used on railway rolling stock. They also meet EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). These converters are entirely potted with a thermally conductive MIL-spec. silicon rubber compound for resistance against shock, vibration, humidity, moisture, dust and insects and are designed to meet IEC 61373 Categories 1 A & B shock and vibration standards. The RWY converters are conduction cooled via a base plate and rated for operation over a -40 to +70oC cold-plate temperature range without derating. The use of components with many years of established reliability and generous headroom results in a high demonstrated MTBF.
Absopulse Electronics provides an extensive range of power supplies for railway, industrial and other extreme environment applications. If our standard designs do not meet your requirements, our engineering team will provide a cost-effective solution to meet your exact specifications. |
|
| MPD now offers SMT mount DC/DC converters over a power range of 1W to 50W. These units are specifically designed to provide miniature size, high performance features, field reliability and compatibility with automated assembly equipment. New models include the LF200S and LF200D, providing 2W of power in a miniature SMT package. Also, our LF100Ex series now features UL approvals. Most series are available on tape & reel. |
|
| MPD offers a variety of DC/DC converters with very wide input ranges. Standard 2:1 and 4:1 inputs are offered on isolated converters ranging from 1W to 30W. Our new non-isolated POL converters also offer very wide inputs on models up to 50W. Standard models feature many high performance specifications such as: single and dual outputs; robust filtering; high efficiencies; wide operating temp ranges; and industry standard pin-outs. Models are available in a variety of packages including compact SIP, DIP, and miniDIP models. |
|
| With 20 references, GEORGIN is covering the main applications with these barriers, certified [EEx ia] IIC in accordance with ATEX directive |
|
| ... products without technical information |
| |
|
|
DC / DC Power supplies, Converters and Regulators
