|
|
| Products 91 to 120 of 152 |
The progressive design of the TRI-DELTA® cable leads to a longer service life of this medium voltage cable.
With continuous further development from 1990, LEONI Studer AG has made the plastic insulated medium voltage cable more compact and lighter by replacing the steel reinforcement of the three-core cable with an extremely tough sheath. At the same time the copper wire shield was replaced by a hermetically sealed longitudinally and transversely water-proof tubular aluminum shield.
The name TRI-DELTA® comes from the triangular cross-section form of the three-wire cable. As a solution to the problem of “water trees” in polymer-insulated cables the TRI-DELTA® cable provides a «dry» medium voltage cable for the first time on the Swiss market.
TRI-DELTA® cables have the certificate «SEV Plus» for conformity and quality. They meet the special SEV quality requirements for plastic insulated medium voltage cables. |
|
Power feed supply for Ibeam (IPN ou IPE)
for all mowing engine, machine, cranes,
standard application for inside or outdoor
version for flat, round or hose or twice
for Ibeam section 48 to 140mm
up to 140mm please ask us specia trolleys
version with 2,3 or 4 wheels |
|
As power cables only
With one control pair resp. quad
With two control pairs
For Indramat® and Siemens® servo motors
|
|
| VFD is the acronym for Variable Frequency Drive, which has become a very popular method to adjust a motors speed. Frequency can be defined as an electrical term meaning power pulses of voltage and current. In the United States 60 Hertz, or 60-power pulse cycles per second, are conducted through most wires and cables throughout the country. As the power in the United States is alternating current (AC) each of these frequency cycles contain one positive and one negative power pulse of voltage and current. Increasing the number of power pulses per second will make the motor turn faster. Likewise, decreasing the number of power pulses per second will make the motor turn slower. Therefore by increasing and decreasing the frequency of the power pulses, the drive can adjust the speed of the motor. |
|
The OLFLEX® VFD and VFD-CT cables are now CE and CSA approved, in addition to being UL-listed, making the popular cables ideal for international use.
The semi-conductive material extruded over the cable’s copper forms a spike resistant barrier, eliminating the corona discharge normally resulting from voltage spikes, reflections, and power distortions. Unlike standard power cables, the enhanced VFD power cables are excellent for connecting variable frequency drives to motors, especially in applications that require a voltage rating of 1000 V/2000 V peak.
A 12x minimum bending radius allows the cable to flex and bend in both moderate flexing applications and confined areas. In addition, the cables offer superior oil resistance thanks to its orange PVC outer jacketing.
The OLFLEX® VFD-CT is rated for use in cable trays and features all the benefits of the OLFLEX® VFD. In addition, the cable is flame retardant, UV resistant, and meets NEC and NFPA requirements.
OLFLEX® VFD SLIM is a reduced diameter shielded motor supply cable for variable frequency drives. The materials used are designed to hold up to the non-linear power distortions associated with VFD drives. This cable has a specially blended PVC jacket that is approved for both UL and CSA standards for 600V. |
|
Multi-Conductor Power Bar Systems
Through its Multi-Conductor Power Bar Systems Woodhead delivers high speed electrical power to your operation floor, in the configuration that best meets your unique needs. Whether you choose a Pow-R-Feed system or an AeroBAR system, we have a solution for you. |
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
-DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
-SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
-FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
-INSTRUMENTATION CABLES
Seismic and oceanographicals
-INBOARD CABLES
Power and control cables for naval defence and maritime industry
-HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
-TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
Applications:
Power and data transmission cables are used for outdoor and underground applications, in water and in concrete provided mechanical damage can be ruled out. These cables are installed for applications such as petrol stations and oil refineries where resistance to oils and fuels is
required. |
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
-DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
-SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
-FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
-INSTRUMENTATION CABLES
Seismic and oceanographicals
-INBOARD CABLES
Power and control cables for naval defence and maritime industry
-HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
-TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
| The Power Cables division covers all commonly used low- and medium voltage cables and the relevant accessories for energy supply networks, up to and including easy-to-install, environment-friendly cabling for cutting systems. |
|
| Wire+Cable for the railway industry |
|
Robotic cables 300 volt ~ 300/500 volt ~ 600volt ~ 0.6/1 kV
PVC Control and Power Cables
Low capacitance zero halogen PUR Electronics Cables
PVC/PUR Control Cables
PE/PUR power and servo single conductors 0,6/1 kV
TPE-E/PUR Electronics and Control Cables
TPE-E/PUR servo single conductors 0,6/1 kV |
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
Bending
Bending/Torsion combined
Oils
Paint, Solvents
- ROBOCABLESÒ F3
Miniaturized cable for drag chain
- ROBOCABLESÒ F1X
Miniaturized cable for very long and high speed drag chain
- ROBOCABLESÒ F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLESÒ F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLESÒ UL
All our range of ROBOCABLESÒ with UL homologation
- ROBOCABLESÒ BUS
Cables answering to all existing bus protocols
- ROBOCABLESÒ CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
- ROBOCABLES F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLES F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLES UL
All our range of ROBOCABLES with UL homologation
- ROBOCABLES BUS
Cables answering to all existing bus protocols
- ROBOCABLES CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
Gore engineers round cable to provide high performance in demanding applications by precisely matching materials to your requirements. We work with you to design and develop cable specifically for your needs. Our expertise in materials engineering and precision manufacturing provides signal transmission performance and mechanical and environmental robustness not available elsewhere.
We assist you in selecting materials and incorporating them into cables designed to deliver precisely the performance you need. We can customize each component, from conductor to final jacket, to your exact specifications. We can assemble groups or individual lines to maximize function, fit, ruggedness and long-term maintenance.
|
|
The nutsetter of spiral lines becomes necessary in nearly all market segments. Whether communication (telephone, radio) or medical technology, Kfz industry, machine, equipment construction, etc. or as inlet in the lamp industry, everywhere find spiral spiral lines their application.
Apart from the electrical-mechanical use, spiral lines are often also a optical-formatively protruding solution. With nutsetter of PVC or polyurethane lines often the inlet can be adapted coloured to the object. Also copper-shielded lines are available.
PVC spiral lines:
small mechanical and chemical maximum stress, middle resetting force.
Polyurethane spiral lines:
in most applications the optimal solution. Both chemically, mechanically, thermally and optically (various paints possible) excellently. Very good resetting force.
Neoprene spiral lines:
The robusteste inlet. Only in black available. Very good resetting force. |
|
All sections, all lengths, with standard right parts of 0,20m on each side.
Possible manufacture with unequal right parts on each side. Possible lengths according to type of cable: 0,20m - 0,30m - 0,40m etc... 2,80m - 3m.
Spiral pipe (4,5x6 - 6,3x8 - 9,5x12 - 12,6x16) to consult us. |
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
- DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
- SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
- FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
- INSTRUMENTATION CABLES
Seismic and oceanographicals
- INBOARD CABLES
Power and control cables for naval defence and maritime industry
- HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
- TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
Irrespective of the application, axon' is able to offer interconnect systems terminated with different types of connectors.
Characteristics
Dependent on the application
- Miniaturised solutions
- EMC/EMI protection
- High flexibility
- Resistance to heat, chemicals, pressure, sterilisation, shock, torsion,...
Construction
- Cables insulated with silicone, thermoplastic materials and any material to customer’s request
- Circular, rectangular, coaxial, Micro-D (D-Line®), Nano-D,
Sub-D connectors
- Shielding for electromagnetic protection
- Termination system : axoclamp®
- Overmoulding solutions
- Multi-branch and hybrid assemblies integrating various configurations of wires and terminations
- Assemblies and couplers manufactured to MIL-STD-1553, axobus®
Applications
- Aeromil : Radars, missiles, military transport aircraft, navigation and communication systems, counter measurement, satellites, …
- Medical : Endoscopy, laparoscopy, ultrasound probes,
medical imaging, …
- Telecommunication : base stations
|
|
Directory of the Workings
Cut, sguainatura, spelatura from 0,12 to 200 mmq
Seam finishes them and capocorda to knots or preblocks, nastrati or melted.
Labelling to warmth or jet or with labels.
Working cables plates step 1,27 and 3,96
Supply Harmonized, special cables, UL, AFUMEX, TEFLON, TEFZEL
Resinatura cables with I rendered some epoxy
Sovrastampaggio cables
Realization cables details, antioil, immersion.
Visual tests and work them
Test of rigidity, isolation, short circuit, continuity.
Fatigue tests
Tests of traction
|
|
| ... products without technical information |
| |
|
|
Electric cables
