|
|
| Products 181 to 210 of 428 |
The GP-IP(USB)FL can connect a measuring instrument to a USB port on your PC via GPIB communication. One of the major features of this product is a simple look as it can connect them using a general USB cable in place of a GPIB cable. As the product itself is a USB device, you can easily and quickly install it on your PC. This means you can use the product to enable GPIB communication even from a notebook PC with no expansion board slot or a space-saving PC with few expansion slots via IEEE-48. The product supports USB 2.0 to enable communication at high speed (a maximum of 480 Mbps). The product is bus-powered from the USB port and thus requires no external power dispensing, resulting in its compact design and best suited for use in a narrow space with a small number of wall outlets available.
|
|
| Mencom Corporation is an industry leader in the manufacturing of Panel Interface interconnectors. With over 3000 designs available, and new ones being created weekly, we offer a wide range of interface solutions. These interface ports allow for safe, easy access to PROFESSIONAL PLC's and other controllers housed inside control panels. The operator can directly interface with the controller without ever having to open the panel door. A wide variety of International power ports have already been worked into current designs. |
|
SCAME, ADVANCE 2 Series, interlocked socket outlets have smooth and well-connected surfaces, with no sharp edge or lines, included the hand grip, which ensure top safety and ergonomic use as well as easy cleaning, being installed in environments that particularly need such requirement.
A vertical convex strip symmetrically runs along the front side, gathering the handgrip control, which can be also provided with lock, the transparent opening for the monitoring of switches or protective fuses that connect down with the socket, following the round profile of the cover and being a sort of functional axis of the product. The small window has been installed by overprinting. It allows maintaining the IP67 degree of protection without using any gasket or shutter, with perfectly smooth surfaces. |
|
| OMNIA Series, in surface mounting and flush mounting versions without protective devices, is designed for industrial use could also be used commercially with its attractive appearance and reduced size. |
|
MERCROTARY
It is a unipolar rotary mercury ring with hole inside. The typical applications are in the following field: splicer, robotic, galvanic.
Suited for high Amps and low RPM. It is manufactured by Celco Profil. S.r.l. and it supplements the Mercotac products range.
The main charatteristic are:
Current capacity: 250Amps. 500Amps. 1000Amps. and on request over 1000Amps. awailable.
Standard cooling system: air. Max speed 300 Rpm.
Special models with water cooling for higth speed, over 300rpm., are awailable.
All the models are builted with hole inside shaft, to pemit the passage of auxillary conductors for signals. |
|
The high-speed SMT connector specification Microspeed with the pitch 1.0mm is especially designed for modern board-to-board applications in telecom and datacom equipments with data rates up to 10 GBit/s. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. Two different signal contact arrangements are possible. For improved crosstalk parallel signal ports are recommended. A excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination area of the shield contacts is available in 2 options: SMT or THR (Thru Hole Reflow).
For fully automatic SMT assembly the connector features:
- Tape and professional reel packaging
- Black high-temperature insulator for fast and reliable visual recognition.
- Integral pick and place surface for easy grip with a vacuum pipette |
|
Custom designed Micro-D industrial connectors
Axon’ propose custom designed Micro-D connectors which meet the most severe requirements (shock resistance, limited space, weight, etc…)
A custom designed number of ways (for example, 18, 33 or 120), connectors including power and coaxial contacts, overmoulding solutions, circular connectors suppliers, etc… are requirements that Axon’ can meet.
Axon’ manufacture the key components of Micro-D connectors (twist pin contacts, insulators, gaskets, etc…).
This strong integration helps the group to offer complete solutions which meet the special requirements of the aeronautics, space, military, industrial, military and off-shore markets.
Axon’ are also able to offer EMI solutions (special shielding, backshells, etc…).
The group also offer a range of standard Micro-D connectors which are QPL qualified per MIL-DTL-83513. The QPL-approval enables Axon’ Cable to do business with military companies which require this approval throughout the world.
All of these MIL qualified products use high reliability twist pin technology.
|
|
Features - DRS
Specifications - Materials & Finishes
Insulator
-Polyphenylene Sulfide per MIL-M-24519, Type GST 40F, Black
Contact Material
-Professional pins - Beryllium Copper per ASTM B194, Alloy C17200
-Professional socket - Copper Alloy per MIL-DTL-83513
Contact Finish
-Gold plate per ASTM B488, Type II (Hard Gold), Code C, Class 1.27 (.000050)
Standard Termination Finish on Integral Tails
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Solder per J-STD-006 (Non-RoHS)
RoHS Termination Finish on Integral Tails
-Pin - Hard gold plate per ASTM B488
-Socket - Hard gold plate per ASTM B488
Standard Termination Finish on Soldercups
-Pin - Solder plated per AMS-P-81728 (Non-RoHS)
-Socket - Hard gold plate per ASTM B488
RoHS Termination Finish on Soldercups
-Pin - Hard gold plate per ASTM B488
Latch
-Beryllium Copper per ASTM B194
Latch Finish
-Electroless Nickel per AMS-C-26074
Professional guide Post
-Brass per ASTM B16, Alloy C36000
Guide Post Finish
-Electroless Nickel per AMS-C-26074
Guide Post (DRS ONLY)
-303 Stainless Steel per ASTM A582
Professional wire - Standard
-26 AWG, 7 Strand, Type E per NEMA HP3
Professional jack Post & Professional screw Receptacle (DRP ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
Retaining Screw (DRS ONLY)
-303 Stainless Steel per ASTM A582, Passivate per QQ-P-35
|
|
| The SS Series and SSC Series short plugs feature an innovative design and lightweight, miniature construction for applications requiring space saving and high pin density configurations. The 102 series, for example, is available with up to nine professional pins in a 9mm diameter. |
|
| Mencom Corporation manufacturers a wide range of PVC, PUR, and Hi-Flex quick disconnect cables. The product lines include; standard MIN (M18,) MICRO (M12,) and NAN (M8) cord sets and field wireable interconnections. In addition to the cord sets, Mencom also offers a full line of mating receptacles, cable glands manufacturers, and other accessories. |
|
Current Rating: 3 amps max
Dielectric Withstanding Voltage:
600 VAC RMS
Insulation Resistance:
5000 Meg ohms min @ 500 VDC
Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating Force:
Forces not to exceed 6 oz/contact
Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles
Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B
Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's
Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's
Durability:
500 cycles
Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps
Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact
Salt Professional spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B
Low Professional level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps
Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps
Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact
Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention
Thermal Vacuum Out gassing:
NASA SP-R-0022
Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force
Solder ability:
MIL-STD-202, Method 208
|
|
Bi-Lobe® - Standard Metal Shell Nano Offset Interconnections
Sizes are 9,15, 21, 25, 31, 37,51 & 65 professional pin, at .025 Mil. Pitch (Currently Available)
Mating Pin & Professional socket models available
All sizes with 18" pre-wired leads
Wiring is Color Coded IAW MIL-STD-681, System 1, using ten solid repeating colors
All sizes Horizontal Surface Mount
All sizes Flex-Circuit Mount
All sizes Vertical Surface Mount
All sizes Straight Thru Hole Mount
All sizes Professional panel Mount Versions (Female Only)
Shells are factory installed
|
|
- Modular Attachable Interconnector System
- Signal, Power, high frequence, professional fiber optic, pneumatic fluid, BUS modules can be mounted into the ODU MAC connector
- Alu-Frame and DIN-housing
- Locking with lever or manufacturer of spindle
- High contact density
- Versatility
- Easy handling with the locking spindle
- High number of mating cycles
- Modification of the catalogue version possible
|
|
The rugged, reliable and flexible industrial connectors specifications as system components.
Also for BUS and fibre-optic cable applications.
Applications include electrical and telecommunications engineering, measuring, test and control technology, mechanical and equipment engineering.
EPIC® is a registered trademark of the Lapp Group in many countries, and the genuine product is therefore only available from Lapp. |
|
The newly developed GES RJ45 module for Heavy Connector Housings enables Ethernet connectivity with the proven durability of industrial industrial connectors. The RJ45 module ensures simple wiring of Industrial Ethernet components with excellent protection against electromagnetic fields, moisture, dust and mechanical influences. The module was specifically designed to withstand the rigors of the harsh industrial environment. This module provides the rapid enhancement of Fast Ethernet professional connections to any equipment utilizing the Modular Connector power/control system, at <=100 MBit/s transmission rate.
Find more information on the datasheet and on www.ges-electronic.de |
|
The HiPro HV-Module presents a major improvement to high voltage modular connection systems. Crimp contacts provide the possibility of connecting conductors with different wire gauges, increasing the modules applicability. The Module is designed to withsatnd voltages up to 18 kV DC and a 30 A current load and increases the variety of possibilities for custom-application industrial manufacturers of connectors.
Find more information on the datasheet and on www.ges-electronic.de
|
|
Multi-Conductor Power Professional bar Systems
Through its Multi-Conductor Power Bar Systems Woodhead delivers high speed electrical power to your operation floor, in the configuration that best meets your unique needs. Whether you choose a Pow-R-Feed system or an AeroBAR system, we have a solution for you. |
|
|
Electric connectors, Electronic connectors
