|
|
Features
- Radial leaded devices
- Aids compliance with:
- ITU-T K.20, K.21, K.45
- Narrow resistance tolerance
- RoHS compliant
Applications
Used as a secondary overcurrent protection
device in:
- Customer Premise Equipment (CPE)
- Central Office (CO)
- Access equipment |
|
Ferraz Shawmut's North American standard power industrial fuse offering covers a complete range of applications and a complete range of circuit protection needs.
By opening in less than ¼ cycle under short circuit conditions Amp-Trap® 2000 fuses limit enough current to prevent undue downstream damage and therefore comply with the extra-stringent IEC Type-2 standard.
SmartSpot® is the name of our new solid state visual open fuse indicator. Finding an open fuse is faster than ever! |
|
Ferraz Shawmut offers you the benefits of a truly global supplier from the one-stop-shopping advantages of our complete line of European and North-American fuses, holders and accessories.
Modulostar®, Lindner® and Blue Dot® are brand names for fuses and fusegear complying respectively to NF, DIN and BS88 standards. Space-saving, modular, modern-day design, reliability are the key words for these lines. To limit drastically short-circuit current and downsize overloads while providing easy installation and complete safety for the operators only one spot: Ferraz Shawmut.
|
|
Principales características de los fusibles D y NH W eg :
Alta capacidad de ruptura (tipo D : 50kA, tipo NH : 120kA);
Clase gL - gG (acción retardada) 500Vca;
Fijación por rieles o tornillos en las bases de los fusibles D;
Material cerám ico de alta calidad;
Bases NH 00 con encaje facilitando el m ontaje de los conjuntos;
Especificación técnica según norm as IEC 269, VDE 0636,
NBR 11844 (Fusibles Tipo D),
NBR 11841 (Fusibles Tipo NH). |
|
DESIGN
BIAX Street lighting Cut-outs in Sheet Steel Construction have been specially designed, keeping in view the application and climatic condition in the Gulf region.
In addition to meeting all the technical requirements,special care has been taken to,ensure excellent corrosion resistance. To facilitate easy installation and connection of Professional cables, requisit number of Knock-out holes are provided along with prescribed type of Cable glands of required size.
During wiring /installation the Cover can be completely opened by removing a single screw.
CONSTRUCTION
Street lighting Cut-outs are manufactured with precision, out of extra thick, best quality CRCA Steel Sheets, Galvanised and Powder Coated for smooth finish and protection against atmosphere.The cut-outs are tested and approved as per IP 44 and IP 54.
RANGE
BIAX Street lighting Cut-outs are available in a complete range from one outgoing type to six outgoing type either with Industrial fuse Carrier or MCB so as to fulfil all requirements. Specially small sized Cut-outs are made for 4.5 MTR poles. |
|
• Ratings to 16A, 250V ac
• For: 5 x 20mm & 6.3mm fuses
• Finger and tool release versions
• PC2 protection category
• Proud and low profile bezels
• Screw and snap to panel fixing
• Wide choice of terminals
• RoHS compliant
|
|
Bulgin’s extensive range of fuseholders are designed to give the degree of protection demanded in today’s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO and IMQ, all types are manufactured from high grade flame retardant nylon and polyester materials.
Designed primarily for 5 x 20mm and 6.3 x 32mm size fuses with protection against shock to categories PC1, PC2 and PC3. There's a choice of styles for in-line, PCB mounting and panel mounting (screw or snap fit) with terminal options for solder, 2.8mm, 4.8mm or 6.3mm tabs or PC spills.
Dust and waterproof designs provide a front of panel industrial seal to IP68 in both 5 x 20mm and 6.3 x 32mm size fuses.
Industrial fuse carrier styles include captive drawer, screw cap - with screw driver release, bayonet cap - with screw driver release and screw cap - with finger release.
|
|
Fuse-holder supplier of terminal blocks, polyamide insulating body, UL94V-0 flame behaviour..
To be mounted onto TH35 - 7.5; TH35 ? 15; G32 type rail, according to IEC 60715.
Version with mounted diode available.
|
|
Ferraz Shawmut offers the most extensive line of fuses worldwide. This line is matched by our line of fusegear. Amp-Trap® UL-CSA fuses line is supported by UltraSafeTM holders line and a complete range of power distribution blocks. For IEC low voltage fuses Modulostar® is a complete and innovative line of holders and disconnectors for ferrule-type fuses, Lindner encompasses numerous solutions of bases, holders, switch-disconnectors for DIN standard fuses, holders also for BS88 standard Blue Dot fuses.
Protistor® fuses for power electronics can be mounted in Modulostar® holders and disconnectors when they are of ferrule-type and in IP20 bases when they are of square-body type. |
|
Category PC1:
No integral protection against electric shock. If required, Designers / Manufacturers must provide additional protection against electric shock on equipment.
Category PC2:
With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC 529 Standard Test Finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Category PC3:
With integral protection against electric shock. Fuseholders shall have live parts inaccessable to IEC 529 1 mm dia. rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn. |
|
Switch & Fusegears
SAFECLIP Industrial fuse Holders provides economies in cost, size and installation time. |
|
- No minimum order quantities
- Order fuses by the box, typically 100 fuses
- Same day shipment on in-stock products
|
|
The new Fuserbloc CD's, from 25 to 1250 A, mean that SOCOMEC now has the most complete range of fuse switches on the market
The Fuserbloc CD's incorporate new functions which make them simpler to fit and use.
Application:
Load-break and protection for low voltage installations and equipment
The range consists of:
25A - 32A - 50A – 63A – 100A – 125A – 160A – 250A – 400A – 630A – 800A – 1250A
Original features and advantages:
The Fuserbloc CD's can meet all the requirements of installers and users:
- The same product can be operated from the front, from the professional door or from the side
- The new range includes the "Test" function as standard, so that auxiliary circuits can be tested without connecting the power.
- A patented system gives the customer the option of front or rear connection for the equipment.
- Modular design so that 2-pole products can be used in DC installations together with 6, 8, 12 etc. pole equipment so that several loads can be controlled with the same handle |
|
EK-3/EKO-3 9F61 Industrial fuse Disconnect Switches
These devices have the additional feature of serving as disconnecting switches to isolate the equipment they protect. It should be noted that the disconnecting switches are not load-breaking devices, therefore the circuit must be open prior to the fuse disconnection. The EKO-3 models are designed to be installed outdoors.
Product Scope:
Indoor and outdoor models.
From 2.75 to 38kV
From 60 to 200 BIL (kV)
|
|
These industrial fuse links are intended to protect high-voltage distribution networks and transformers according to the International Standard IEC 60282-. They are of current-limiting type and for indoor as well as outdoor use.
The line is made by:
· Back-up fuse links with or without CPD (Controlled Power Dissipation),
· General Purpose type fuse links.
The line lies between 3/7.2 kV and 20/36 kV of rated voltage.
Two ranges exist in this line :
· International range complying with IEC 60282-1,
· German range complying with IEC 60282-1 (VDE 0670 T4) as well as VDE 0670 T402.
The Controlled Power Dissipation (CPD) from Ferraz Shawmut is driven par power dissipation and not only by temperature. While operating faster, it avoids high temperatures especially in SF6 switchgear. The mechanism of the CPD actuates the ‘medium’ type striker of the fuse link. In that case a combination with a switch is required.
|
|
|
|
Fuses, Fuse holders
