|
|
The UMT 560 multi transducer and analyser is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard. Records are stored in the internal memory for the period of the last three years. Moreover, more than 100,000 deviations of the measurands from the standard values are stored, which enables finding eventual reasons for the problems in network. Optional limits and required quality in a monitored period can be defined for each monitored characteristic.
The transducer measures and records the following characteristics:
- Frequency deviations
- Voltage deviations
- Voltage clips
- Voltage interruptions
- Voltage unbalances
- Over-voltages
- Fast voltage changes
- Flicker intensity
- THD
- Harmonics
|
|
Universal mobile
The test system is equipped with a universal tester. With this new developed unit you can also carry out high- voltage tests with AC or DC.
Furthermore you can also realize an insulation- and PE- resistance test. Moreover the test system can be expanded with a leakage current tester for the latest norms. The components are connected with a matrix and they are controlled with a special software package.
The slots are placed in a 19 / 12HE Rack. The whole test system is placed in a mobile. To adapt the test probes serves a connection box. With this box you can contact all kind of test probes.
At the back of the tester are high- voltage sockets. So you can realize a manual high- voltage test.
As an option the mobile is equipped with a PC.
|
|
|
SIRIUS89N is a complete model to perform all safety tests in compliance to VDE 0413, measure of values of environmental parameters (temperature/humidity, illuminance, sound level with optional probes), leakage current with optional clamp and to perform a network power quality of single phase in compliance to EN50160 guideline.RCDs which suddenly trip out, transformers which overheat, motors which burn out, voltage sags and surges which create problems, all these problems could be easily solved with SIRIUS89N. The meter permits to perform a Loop impedance measurement (P-P, P-N, P-PE) also with high resolution (0.1mOhms) with the use of IMP57 optional accessory and five predefined recording settings are integrated in order to to help the user on the most common situation which are present on the network quality (EN50160, Voltage Anomalies, Harmonics, Start-Up and Power & Energy). SIRIUS89N can perform current measurements up to 3000A AC also by using a flexible clamp type in order to perform measurements on big cables or bars also. Thanks to the PC interface and the powerful software you will create accurate documents qualifying your professionalism more and more.
|
|
|
SIRIUS 87 is a model to performing all safety tests according to VDE 0413 on electrical installations. Inside model are integrated new fundamental features: the possibility to perform Loop Impedance (P-P, P-N, P-PE) at high resolution (0.1mOhms) with use of IMP57 optional accessory. Thanks to its PC interface and powerful software you will create accurate documents qualifying your profession more and more.
|
|
STL's unique 26 bit ADC pioneers in a novel underwater system to measure magnetic and electric fields. Three or more sensor platforms are connected to a base station in a chain configuration by a single cable used for power and data transmission as well as for deployment and recovery. The analogue sensor front end is formed by 3 pairs of UEP Carbon electrodes followed by ultra low-noise isolation preamplifiers, a 3-axes low-noise fluxgate, and environmental temperature and pressure sensors.
The digital part is based upon a novel high performance 26 bit analogue-to digital converter. Consequent digital signal processing provide temperature and geometry compensated signal output.
The three magnetic and electric field vector components are complemented by a pair of high resolution tilt sensors to achieve the precise softwarealignment of the sensor platform with respect to magnetic North and the Earth's gravity centre. In addition the system can be equipped with sensors to measure acoustic and pressure signature as well as environmental information like water current vector, temperature and conductivity.
The sensor system includes also DGPS and, therefore, is able to track the target traces with high precision. All signal channel can be read out and visualized in quasi real-time.
|
|
DIRIS has been developed by Socomec over the last 10 years. It is a complete system for the operation of low and high voltage electrical networks and offers measurement and monitoring of electrical values, energy metering and management (electricity, water and gas), command and remote control of equipment and network protection.
3 new, highly-innovative products are being added to this range: the DIRIS A20, A40 and A41
Application:
All industrial or commercial LV/HV electrical installations
Original features and advantages:
The DIRIS A products meet all the requirements of installers and users:
- Easy to fit (compact casing, plug-in terminal blocks)
- Extremely accurate with high quality measurements using an ASIC component developed by Socomec
- Optimum readability with backlit, high-resolution LCD display
- Direct access to data via 4 or 6 large keys
- Board can be upgraded with additional modules (communication, harmonics, alarms) providing long-term value for your investment
|
|
BT 200 Bus Tester - Check the physical bus design of the PROFIBUS network at the end of the installation phase. Installation errors can be detected quickly and without any effort; no special knowledge of PROFIBUS is required. It is an invaluable assistance when installing distributed automation solutions with PROFIBUS.
BT 200:
Check electrical PROFIBUS networks also without a connected master
Minimizing errors during installation and commissioning
Easy to operate even without special PROFIBUS knowledge
Finds installation errors within seconds
Reduces commissioning and service times and increases plant availability
Optional logging kits available for compiling acceptance reports/documentation
Choice of 6 languages
For installers, start-up engineers and service personnel
|
|
E-Ze TEST NON-TRIP EARTH LOOP IMPEDANCE TESTER - EZ2100 - £199.00
A revolutionary new 17th Edition tester with T-Safe™
non-trip earth loop impedance check.
The E-Ze Test performs:
• non-trip earth loop test
• voltage test
• socket test
Test readings scroll through in sequence on the clear,
back lit, 32 character display to show socket problems,
or high/low voltage conditions. Then the earth loop
impedance test result is displayed.
|
|
Small and practical radiation monitors worn directly on the body are used for personal safety in strong electromagnetic fields. Visual and acoustic warning signals alert the user when threshold values are exceeded, for example during service work on transmitting equipment for radio relay, satellite and broadcast communications as well as radar and telecommunication facilities.
RadMan has been designed for daily use, not just as a warning and monitoring device, but also for taking quick measurements of EMF levels present in the immediate environment and detecting leaks in antenna cables.
The sensors are integrated in an orthogonal pattern, which allows them to measure electrical fields (up to 40 GHz) and magnetic fields (up to 1GHz) separately and independently of direction. This makes it simple and quick to test the EMF situation in the workplace at any time. RadMan is also an excellent tool for finding leaks in cables and power supplies for antenna connections.
Monitors in the RadMan range are also available as an "XT" version with a long-term data memory for monitoring and recording the minimum, maximum and average radiation levels. With the help of analysis software it is also possible to evaluate the results as easy-to-read graphics or tables.
|
|
|
The advanced model VEGA 76 is a recorder instrument which performing analysis and tests on electrical single and three phase system with or without neutral. The instrument displays in real time the values of all fundamental electrical quantities featuring the electrical installation under test (Voltage, Current, Active Power, Reactive Power, Apparent Power, etc.) showing the trend of wave forms of voltage and currents. It is also possible to store in the instrument's memory a maximum of 64 quantities, voltage anomalies. VEGA 76 use innovative inputs flexible clamps for current measurements (up to 3000A) directly connected without any other interface. The software (Windows compatible) provided with the instrument enlarge the potentialities of the instrument. It is also possible to display and recording the harmonic values of voltage and current.
|
|
The UPM6100 is a portable analyser suitable for electrical parameters measurement on single- and three-phase systems, as well as on direct current systems.
Main features:
- 4 MB Removable Memory Card for Data Logging
- Integrated Printer (Option)
- Large Graphic LCD Display with Excellent Visibility
- Graphic Representation of Voltage and Current Waveforms, Harmonic Spectrum and Phasor Diagrams
- FFT Harmonic Analysis up to 50th Order
- Sags and Swells Detection
- Power and Current Demand Calculation
- Compact and Rugged Case Carrying Accessories
- UL Listed Under UL61010B-1 and CAN/CSAC22.2 No.1010.1-92, File #E231725
- Dedalo Software Included
|
|
Examples for the use of a Helmholtz Coil system:
- generation of a 3 dimensional homogenous magnetic field
- active magnetic shielding from sub Hz to MHz frequencies
- specification of gradiometers
Some characteristics:
- large 1/1000 error free homogenous region (20x20x20 cm3)
- transportable unit (1hour installation)
- delivery including transportation box
|
|
This world-wide unique system allows for automated testing of power transformers, CTs, VTs, resistance testing, and more.
Providing up to 800 A (or 2000 A with current booster) and 2000 V, it comes complete with an integrated PC. Its software routines test a wide range of substation equipment, and automatically create customizable reports. The compact design (29 kg / 64 lbs) and the innovative software save testing time and minimize transportation costs.
Benefits
- Lightweight (29 kg / 64 lbs)
- One test unit for multiple uses
- Automated testing and reporting
- Safety Features
- Prepared for the future
|
|
# he model 8500 is an affordable full-featured Programmable Electronic DC Load with a high degree of accuracy and great display resolution. They are great units for DC Power Supply and DC-DC Converter testing and calibration. Because the are fully programmable via the RS 232 or optional USB interface they are ideal for Automated Test Systems. Operates Between 0-120VDC, 1mA-30A (300W MAX)
# High Resolution 0.1mA/1mV (range dependant)
# VFD Display
# CV/CC/CW/CR Operation
# Over-Current/Over-Voltage/Over-Power/Over-Temperature Protected
# RS 232 Interface Cable and Software Included
# Optional USB Interface Available (order IT-E132)
# Thermostat Controlled Internal Fan
|
|
The network analyzer MCA Plus is an instrument that measures, calculates and shows the main electrical parameters in industrial 3 phases networks (either well-balanced or non-well balanced).
Reactive energy controllers MCE and MCX are designed for measuring the needs of reactive power in an installation and carry the necessary instructions for switching on/off the capacitors in order to maintain the right power factor cos.
|
|
CM-Line Secondary Injection test sets are the right choice for Utilities, Industry and Railway as well as for Relay, Meter and Measurement Device Manufacturers. The combination of a robust, truly portable, reliable and accurate Hardware designs together with the incomparable Test Universe Software is the basis for OMICRONs ongoing success in maintaining its place as World Leader in the 3-Phase secondary injection test set market.
CMC 356
"The workhorse" - The CMC 356 is designed to optimally cover the modern requirements for commissioning and maintaining substations and protection devices. Its specifications cover applications in generation (including distributed generation), transmission, distribution, industry and railways - in high, medium and low voltage levels.
CMC 256plus
"The reference" - The CMC 256plus is the universal solution for testing old and new generations of relays and calibrating all kinds of meters, power quality devices and transducers. It is the first choice for all applications requiring the highest versatility and accuracy. The CMC 256plus supersedes the well-known CMC 256-6 test set.
CMC 156
The compact solution for three-phase testing of relays, meters and transducers, weighing only 9.8 kg / 22 lb. Ideal for applications requiring a high degree of portability (routine testing, etc.).
|
|
Imagine a rooftop with several mobile radio systems and a TV transmitter nearby. How can you tell what each system is contributing to the overall field exposure level? When it comes to different areas such as occupational safety, the general public and the home, the relevant field levels can vary. Which field sources are at stake? What is the corresponding fieldstrength?
The SRM-3000 answers these questions, directly on site. With its triaxial probe, the SRM-3000 measures the electromagnetic field selectively, by service and frequency, regardless of where the radiation is coming from. You can view the results as a field strength or as a percent of the legal limit. It provides an immediate summary of all sources with their field strengths, right on the spot.
Nardas Selective Radiation Meter SRM-3000 is highly portable, battery-powered and immune to interference so you can take it with you wherever you go. It covers the frequency range of main interest from FM radio to 3rd generation mobile radio systems. The SRM evaluates the field strengths it measures in accordance with the applicable regulations, and delivers results as a field strength level or as a percent of the legal limit. No PC is required for this operation.
|
|
We offer the world's largest range of EMC Transient & Impulse test solutions for compliance or 1st article testing. Innovative transient/impulse test systems from a few 100 volts to over 100 kV, tailored specifically for your industry. Specialists in avionic, CE immunity, telecommunication, and component test equipment.
|
|
We offer various solutions for PC-controlled automatic winding test systems.
Standard test systems and customer-specific solutions
Contact and test fixtures Test-cabins
|
|
Testing circuit breakers to ensure proper operation
High voltage circuit breakers are extremely important for the function of modern electric power supply systems. The breaker is the active link that ultimately has the role of quickly opening the primary circuit when a fault has occurred. Many times, the breaker has to perform its duty within a few milliseconds, after months, perhaps years of idly standing by.
Ever since its introduction in 1984 of the first microprocessor based breaker analyzer on the world market, Programma has taken the lead in portable test instruments for high voltage circuit breakers. Over the years, many new user requirements have lead Programma to innovate new solutions to provide test engineers in the field with effective tools for determining the status of circuit breakers.
|
|
Breakers are situated at the key points of electrical energy transmission and distribution systems. Their reliability has a decisive influence on the availability, safety and economic efficiency of electrical supply networks.
Initially, the reliability of newly installed breakers depends on their construction, the manufacturing quality and the type and scope of final factory inspections and tests. However, once installed on site, only regular tests can guarantee perfect functioning throughout the operational life of a breaker.
Automatic test systems provide precise information as to the state of the switching chamber and drive unit throughout the entire operational life of a breaker without requiring these to be opened. The sheer number of parameters to be calculated, the wide variety of different breakers in use and the harsh environmental conditions encountered during on-site tests make extremely high demands on the test technology involved.
|
|
|
Transformers are very reliable devices and can provide service for a long time if maintained and serviced regularly. They are also the single most costly item in any substation. To protect against failures that can result in costly repairs and long periods of downtime, trust your transformer to the accurate and reliable test equipment from Megger. The best insurance against transformer failure is to ensure that they are properly installed and maintained. The complete line of Megger equipment make testing easy and accurate.
|
|
The OMICRON Transformer Diagnostic System is a unique test equipment which provides automatic testing of important transformer parameters within one portable system. The test system is comprised of the CPC 100 Multi-function Primary Test System and the CP TD1 Tangent Delta unit.
The patented CPC 100 is the main control unit for the test system and the CP TD1 unit is used for testing of insulation condition. Together, the system is the ideal tool for comprehensive testing of the
following parameters of a power transformer:
Winding resistance
Turns ratio and excitation current
On-load tap changer condition
Leakage reactance
Insulation condition (capacitance, tangent delta, power factor)
|
|
Features
Programmable Test Sequences
Multi-link Solution Software
Tests DCR/ACR/L/C/Z/LL to 200KHz
20 Independent Channels
Versatile I/O RS-232 Interface
Q Factor and Phase Angle
Hi-speed Production Testing
|
|
All measured values in any desired power supply system can be measured with one single unit, the SIMEAS T. The unit possesses 3 electrically isolated analog outputs, one binary output, as well as a RS232 or RS485 serial interface.
Any desired measured value (current, voltage, active power, frequency, etc.) can be assigned to each of the 3 analog outputs, as well as any desired measuring range.
The output signal (e.g. ± 20mA, 4 to 20 A, etc.) can be freely parameterized for every output. The binary output can be used as a kWh meter to register the energy or as a limit monitor. Input currents up to max. 10 A or input voltages up to 600 V with rated frequencies of 50, 60 or 16 2/3 Hz can be connected.
Features:
Smallest size
Short delivery times, from stock
CE mark
EMC interference immunity
Satisfies relevant international standards
High quality, long life
Electrical isolation with high test voltage
High measuring accuracy
Real rms measurement
Powerful output signal circuits
One unit for all applications
All data freely parameterizable
High plant security and reliability
Very easy servicing
|
|
Power Transducers
ET-P-IU Active Power Transducer (604 200)
604 200 ET-P-IU
3-Phase active power measurement
Compatible with 3-Phase/3-Wire, 3-Phase/4-Wire,
0.1% error
IEC 60688 class 0.1
Universal AC or DC power supply options
3 port 2.5kVAC isolation
Low power
Wide operation temperature range
ET-P-IU is a high accuracy, 3-phase active power measurement transducer designed for 3-Phase/3-Wire, 3-Phase/4-Wire services The ET-P-IU measures active power and produce an industry standard analog output which is proportional to the measured input value.
ET-Q-IU Reactive Power Transducer (604 300)
604 300 ET-Q-IU
3-Phase reactive power measurement
Compatible with 3-Phase/3-Wire, 3-Phase/4-Wire,
0.1% error
IEC 60688 class 0.1
Universal AC or DC power supply options
3 port 2.5kVAC isolation
Low power
Wide operation temperature range
ET-PF-IU Isolated Power Factor Transducer
Power factor measurement
0.1% error
IEC 60688 class 0.1
Universal AC or DC power supply options
3 port 2.5kVAC isolation
Low power
Wide operation temperature range
ET-LF-IU Isolated Line Frequency Transducer (604100)
Line frequency measurement
0.1% error
IEC 60688 class 0.1
Universal AC or DC power supply options
3 port 2.5kVAC isolation
Low power
Wide operation temperature range
|
|
|
Other electrical measuring instruments
