Amplifier modules

89 companies | 261 products
Filters
  • What’s new?
    Submit
differential amplifier - ADL5xxx, ADAxxxx, ADxxxx series

Analog Devices has developed a wide range collection of high speed differential amplifiers allowing easy configuration of output common-mode voltage through a VOCM pin. These amplifiers control the differential...

wide-band amplifier - ADL5xxx series

The Broadband Amplifiers is an innovative product designed by ADI. It is...

{{productDetail[22009]}}
current preamplifier / precision - ±10 V, max. 100 mA | SIM918

The SIM918 is a flexible preamplifier that features auto-zeroing that can be controlled remotely or from the front panel suitable for sensitive applications requiring...

dual-channel amplifier / wide-band - DC - 300 MHz | SIM954

The SIM954, which is manufactured by SRS, is a 300 MHz, dual-channel inverting...

analog amplifier / summing - ±10 V, 1 MHz | SIM980

What made the SIM980 Summing Amplifier the top of the line among the other amplifiers is that it has four input channels that can be added or subtracted...

synchronous amplifier / synchronous - 0.001 Hz - 102.4 kHz | SR850

The SR850 is a digital lock-in amplifier based on an innovative DSP (Digital Signal Processing) architecture. The SR850 boasts a number of significant performance advantages over traditional lock-in amplifiershigher dynamic reserve, lower drift, lower distortion, and dramatically higher phase...

synchronous amplifier / synchronous - 1 mHz - 102.4 kHz | SR810, SR830

Providing high-quality performance at a reasonable cost, the SR810 Lock-In Amplifier displays...

{{productDetail[7218]}}
differential amplifier - THS, LMH series


TI's analog fully differential amplifiers are a part of our...

differential amplifier - INA series

TI analog Difference Amplifier Amplifiers and Linear products are a subset...

{{productDetail[33647]}}
capacitance amplifier - ± 0.02 %, 0 - 12.5 mm

The Accumeasure 500 compact capacitance rack system allows up to 6 standard/MTII proprietary push/pull capacitance...

{{productDetail[19330]}}
wide-band amplifier - 10 - 3 000 MHz

Pasternack RF amplifiers are suitable for conversion of low power, low frequency RF signal into a higher frequency signal at greater power. Typical uses are in systems for driving antenna transmission power. The amplifiers are suitable...

low noise amplifier - 50 MHz - 1.8 GHz

To convert low power, low frequency RF signal into a larger frequency at higher power the Pasternack RF amplifiers can be used effectively. These are mostly used in applications such as driving transmission power of an antenna....

{{productDetail[18635]}}
frequency distribution amplifier - SAS-E

SAS-E Switch & Amplifer Systems offer distribution of signals to many devices in applications...

frequency distribution amplifier - 7535-001

The model 7535-001 is a Quad (4) buffer amplifier (1 input to 4 output). Each...

frequency distribution amplifier - 8140

Spectracoms Frequency Distribution System comprises of the Model 8140 Distribution Amplifier and combinations...

frequency distribution amplifier -  8143

The Model 8143 Signal Selector/ Distribution Amplifier detects failure of either input signal and provides manual or automatic...

frequency distribution amplifier - 8144

The Spectracom Model 8144 Clock Selector / Distribution Amplifier...

{{productDetail[34040]}}
wide-band amplifier - 300 Vpp, 150 mA, DC - 500 kHz | 9100

Model 9100 is a Single-Channel, 2U, half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9100 amplifies...

wide-band amplifier - 400 Vpp, 125 mA, DC - 500 kHz | 9100A

The Model 9100A was designed as a general purpose, wide band and high voltage amplifier however, with specific applications in mind. Its a single four...

dual-channel amplifier / wide-band - 300 Vpp, 100 mA, DC - 500 kHz | 9200

Model 9200 is a Single/Dual Channel, 2U, half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9200 amplifies...

wide-band amplifier - 400 Vpp,100mA, DC - 500 kHz | 9200A

Model 9200A was designed as a general purpose, wide band and high voltage amplifier however, with specific applications in mind. It is built in a small case size to save...

four channel amplifier / wide-band - 400 Vpp,50 mA,DC - 500 kHz | 9400

Model 9400 was designed as a general purpose, wide band and high voltage amplifier however, with specific applications in mind. It has four channels built in a small case...

{{productDetail[33695]}}
wide-band amplifier - 2 - 20 GHz, 7.5 dB | TGA8622-SCC

The TriQuint TGA8622-SCC is a broadband general-purpose amplifier that operates over the 2 to 20 GHz frequency range. Six 200 um dual-gate FETs provide the amplifier with a typical...

low noise amplifier module - DC - 14 GHz, 11 dB | TGA8349-SCC

The TriQuint TGA8349-SCC is a GaAs monolithic low noise distributed amplifier designed for use as a multi-octave general purpose gain block. Nine 122 um gate-width FETs provide 11dB nominal gain at 3.1 dB...

low noise amplifier - DC - 45 GHz, 13 dB | TGA4830

The TriQuint TGA4830 is a medium power wideband low noise amplifier (LNA) which operates from DC to 45 GHz. Typical small signal gain is 13 dB with > 20dB AGC range. Typical input and output return loss is 15 dB. The TGA4830 provides...

wide-band amplifier - DC - 12 GHz, 16 dB | TGA8652-SL

The TriQuint TGA8652-SL is a medium power wideband AGC amplifier combined with off-chip circuitry assembled in a surface mount package. The part typically provides 16 dB small signal gain with 6 dB AGC range. Typical input and output return...

power amplifier module / RF - TQM7M9053

The TRIUMF™ TQM7M9053 is a fully matched Multi-mode Multi-band Power Amplifier module that offers quad-band GSM/EDGE and WCDMA/LTE bands 1, 2, 5 and 8 for the 3G/4G market in North America, Europe and Asia. The versatile 5 x 7.5mm module simplifies RF design for increasingly complex...

{{productDetail[34240]}}
microwave amplifier - M20579xA series

Multi-octave bandwidths
2 to 18 GHz
Max input...

microwave amplifier - M20579xA series

e2v designs and manufactures a wide range of High Power Satellite Uplink satcom amplifierAmplifiers (HPAs) under the StellarCool and Stellarmini brands.

The Stellar range covers all of...

TOP amplifier / TOP - StellarMini™

The StellarMini™ is the latest generation of e2v high power Travelling Wave Tube (TWT) outdoor satellite uplink amplifiers. Smaller and lighter (weighing only 8kg) than any other equivalent high power amplifier available on the market today, but with just as much power (180W), StellarMini™ proves great things...

{{productDetail[60092]}}
capacitance amplifier / single-channel - 0 - 10 VDC | 410 series

Capacitec single channel capacitance amplifier is available in various versions.

The 4100-SC, ± 2.0% linearity, without meter, is a basic capacitance amplifier module with single channel. When compared to the conventional rack and amplifier method, this stand-alone module is more economical. The...

capacitance amplifier / rack-mounted - 0.2 - 12 kHz, ± 10 V | Capteura™ 200 series

The Capteura™ 200 Series has an extreme security and lowest noise solution for displacement measurements when used in combination with any of capacitec...

capacitance amplifier / rack-mounted - 0.2 - 16 kHz, ± 10 V | Capteura™ 520 series

The Capteura® 520 Series amplifier card, which is manufactured by Capacitec, are designed to operate with every probe diameter configuration...

capacitance amplifier - 0.23 kHz, ± 15 V | 4000 series

The modular non-contact capacitive displacement instrumentation in the 4000 series is known for the ability to drive a maximum cable length using very small sensor diameters, along with exceptionally large linear ranges. The products are...

capacitance amplifier - 0.23 kHz, ± 15 V | 4000 series

410-XSC is a product delivered with a BNC input connector, while the probe description OEM style in the HPC series is an open frame signal conditioning board, which works well with both new and existing HPB,...

{{productDetail[15734]}}
conditioning amplifier / signal - Red-FTV

The 3-way isolation amplifier is used for electrical isolation and conversion of current and voltage signals. The 3-way isolation guarantees reliable decoupling of the sensor circuit from the processing circuit and prevents linked measurement circuits from influencing each other....

conditioning amplifier / signal - Red-MTV-6200

The 3-way isolation amplifier is used for electrical isolation and conversion of bipolar and unipolar process signals. Input and output range can be set by using DIP switch. The zero/span adjustment on the front allows a fine-tuning of the measurement signal and the recalibration after a range selection. The 3-way isolation guarantees reliable decoupling of the...

signal amplifier / conditioning - Red-NTV-28K

The 3-way isolation amplifier is used for electrical isolation and conversion of standard process signals. The signal combination is selected by the order no. The 3-way isolation guarantees reliable decoupling of the sensor circuit from the...

signal amplifier / conditioning - Red-STV-7200

The 3-way isolation amplifier is used for electrical isolation and conversion of bipolar and unipolar shunt voltages. Input and output range can be set by using DIP switch. The zero/span adjustment on the front allows a fine-tuning of the measurement signal and the recalibration after a range selection. The 3-way isolation guarantees reliable decoupling of the sensor...

{{productDetail[38912]}}
RF amplifier module / power - 10 kHz - 250 MHz | DP series

The Prana DP series is an array of RF power amplifier modules used in EMC tests, RF tests and instrumentation, radio communication...

RF amplifier module / power - 10 kHz - 400 MHz | DR series

The DR series is a solid-state amplifier manufactured by Pico Electronics. It is suitable for EMC and RF tests and instrumentation,...

RF amplifier module / power - 10 kHz -1000 MHz | DT series

DT series broadband power amplifier is constructed with accessible components, enclosed in a modular-patterned housing. It requires...

RF amplifier module / power - 100 kHz - 200 MHz | GN series

The GN series is a solid-state amplifier manufactured by Pico Electronics. It is suitable for EMC and RF tests and instrumentation,...

RF amplifier module / power - 20 -1000 MHz | LT series

Maintenance:
It has an amplified design which requires minimal maintenance. It enables easy access to every part because of its highly modular design. It can be repaired easily by making...

{{productDetail[68783]}}
wide-band amplifier - 1 GHz | J750

Highland technology's single channel compact wideband amplifier is fitted for general-purpose instrumentation. This wideband amplifier has an adjustable...

pulse width modulation amplifier module / PWM - max 10V | V860

MODEL V860 PULSE AMPLIFIER VME MODULE

The V860 is a multichannel pulse amplifier packaged as a standard VME module. It accepts logic-level...

pulse width modulation amplifier module / PWM - 10 V | V860

V860 6-CHANNEL VME PULSE AMPLIFIERS are specifically designed and manufactured to amplify signals accepting logic-level signals as inputs and in turn generating high-level...

{{productDetail[55423]}}
transimpedance amplifier module / transimpedance - DC - 100 kHz | TA107

The TA107 by Newtons4th Ltd. is a transimpedance amplifier (TIA) module which are the compatible unit for systems...

wide-band amplifier - LPA05  20Vpk @ 3Arms,  18Vpk @ 5Arms, DC to 1 MHz

Wide bandwidth signal amplification at up to 8 A is provided by the LPA05A & LPA05B. It can be used in an extending range of industrial as well as laboratory applications. It is designed for the...

wide-band amplifier - 400 V @ 50 mA, DC - 1 MHz | LPA400

Newtons4th Ltd releases a range of LPA power amplifiers that are strong and reliable making them perfect for different kinds of industrial and laboratory applications. Initially, they...

wide-band amplifier - 14 V @ 1 A, DC - 1 MHz | LPA01

The Newtons 4th Ltd LPA range of power amplifiers are used in various industry and laboratory operations because they are extremely strong and reliable. They were originally designed for the use with...

{{productDetail[67414]}}
low noise amplifier - 3 - 3.6 V | AWL9966

The ANADIGICS AWL9966 is a high performance InGaP HBT FEIC that incorporates dual band power amplifiers, low-noise amplifiers, RF switches, and filters. The FEIC is designed for WLAN transmit and receive applications in the 2.412 GHz to 2.484 GHz and 5.15 GHz to 5.85 GHz bands. Match to 50 Ohms at...

power amplifier / linear - 12 V, max. 1 GHz, 180 - 530  mA | ACA0, ACA1 series

Our 12 V and 24 V CATV surface mount line amplifier ICs provide exceptionally low distortion and noise figure over the entire
frequency spectrum...

{{productDetail[34226]}}
wide-band amplifier - 1 kHz - 1.2 GHz, 20 dB | S5200

The Baytems S5200 with key features like minimum distortion, minimum noise, long life stability...

wide-band amplifier - 1 kHz - 1.2 GHz, 40 dB | S5400

Baytems S5400 broad band amplifier has a 40 dB gain which covers the normal frequency range starting from 9 KHz to 1 GHz. Having a superior gain and reduced...

{{productDetail[100717]}}
frequency distribution amplifier - FDU-240

FDU-240 LOW PHASE NOISE DISTRIBUTION UNIT - OFFERS 24 5MHZ OR 10MHZ OUTPUTS

The Brandywine Communications Model FDU-240 offers the user the most requested and reliable frequency distribution features in one time and frequency distribution unit. The base unit is a dual input, 24 output frequency distribution amplifier suited for 5MHz or...

frequency distribution amplifier - IBU-240

The Brandywine Communications IBU-240 is a dual input to 24 output low frequency distribution amplifier specifically...

frequency distribution amplifier - TDU-310

The TDU-310 is a high performance time signal distribution...

{{productDetail[54201]}}
power amplifier module / RF - 3.2 - 8.8 kW | 5CX series

The 5CX1500A is designed for use as a Class C rf power...

power amplifier module / RF - 10 - 33 kW | 3 CX, 4 CX series

The 3CX10,000U7 high-mu triode is intended for
use as a cathode driven RF amplifier in the VHF
spectrum. It is a very linear...

TOP amplifier / TOP - 200 - 750 W | T, V series

higher
efficiency in an
environmentally...

TOP amplifier / TOP - 7.9 - 8.4 GHz | T, V series

high
efficiency in an
environmentally...

{{productDetail[33711]}}
release  amplifier / switch-mode - Digispeed DS2 V4

Features:

Power supply 24V DC
100V overvoltage pulse
DIN rail mounting
Logic...

release  amplifier / switch-mode - Digipow DP DC

Features:

2 channels
Switching delay time of 60 µs
2 inputs with logic AND...

{{productDetail[26815]}}
conditioning amplifier / signal - AT063

The function of the amplifier module AT063 is identic to AT057. The new module is mounted into an aluminum box for protection...

conditioning amplifier / signal - AT063

The function of the amplifier module AT063 is identic to AT057. The new module is mounted into an aluminum box for protection against electro magnetic compatibility. This module is...

pulse width modulation amplifier module / PWM - AT155

The PWM U/I module AT155 is able to transform 4 pulse-duration modulated input-signals to analogue output-signals. The signals may be generated by different controllers. The galvanic separation...

{{productDetail[112981]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation