Electronic filters

Frequency: 30 MHz - 40,000 MHz

... power operation. Each filter is custom-designed to your exact specification so that you will receive the optimum performance at the lowest cost. Standard cavity filters generally are designed using aluminum ...

Frequency: 24 MHz - 3,000 MHz

... the factory for your specific requirements. An additional feature of our Tunable Filter Product Line is the ability to ship standard bandpass and bandreject filters overnight from stock.

Frequency: 18 GHz

Planar X Thin Film RF Filter solutions Planar X Series is part of an overarching initiative by Smiths Interconnect that entails the creation of best-in-class planar RF filter solutions designed and tested ...

Frequency: 10 Hz - 55 Hz
Voltage: 12 V - 30 V
Primary current: 4,000, 500 mA

S15F in-line filters are small, plug-in accessories designed to connect directly to a sensor, indicator, or other device. They fit seamlessly into your factory applications and begin operating immediately to suppress ...

... of CISPR22 /EN 55022 Class B. EMC filter used with the MORNSUN AC/DC module, AC/DC module’s max. Input voltage must not more than EMC filter’s max. Voltage, AC/DC module’s max. Input current must less ...

... requirement of CISPR22 /EN 55022 Class B. EMC filter used with the MORNSUN DC/DC module, DC/DC module’s max. Input voltage must less than EMC filter’s max. Voltage, DC/DC module’s max. Input current ...

Frequency: 150 kHz - 500,000 kHz
Voltage: 110 V
Primary current: 3.5 A

FEATURES - Meet IEC/EN61000-4 series standards and CISPR32/EN55032 - Meet railway industry EN50155 standards - Efficiency up to 98%

Littelfuse common mode noise filters with ESD protection are used to suppress unwanted common mode noise with no adverse effect on the signals (differential cut-off frequency) and also offer additional ESD protection functions.

Frequency: 60, 50 Hz
Voltage: 208 V - 480 V
Primary current: 20, 320, 40 A

... Energy? • More than 20 years experience in active filtering solutions • Compliance to grid standards and norms • Integration of load balancing, power factor compensation and harmonics filtering ...

Frequency: 60, 50 Hz
Voltage: 480, 400 V
Primary current: 30 A - 400 A

... filtered for maximum filter effectiveness Power factor correction both inductive and capacitive Phase current balancing, improvement of consumption in neutral (4W model) If higher filtering capabilities ...

Frequency: 60, 50 Hz
Voltage: 480, 400 V

LCL filters have been specially designed to eliminate the harmonics from the current absorbed by 6-pulse power converters, such as frequency variators for motors, UPS, etc. These are essentially passive filters ...

Frequency: 60, 50 Hz
Voltage: 480, 400 V

The LCL-TH filter is an LCL filter that is regulated through static switching operations (thyristors) and which has been specially designed to compensate harmonics in 6-pulse power converters that work ...

Voltage: 24 V
Primary current: 4 A

Filters of the SFK12-4S2124 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 24VDC. Interference pulses or interference voltages are dampened independently ...

Voltage: 48 V
Primary current: 4 A

Filters of the SFK12-4S2148 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 48VDC. Interference pulses or interference voltages are dampened independently ...

Voltage: 24 V
Primary current: 16 A

Filters of the SFK12-16S2124 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 24VDC. Interference pulses or interference voltages are dampened independently ...

Frequency: 60, 50 Hz
Voltage: 690, 400 V
Primary current: 30 A - 150 A

... series Active Harmonic Filter is a new type of power quality improvement products for the harmonic distortion in the circuit. With the advantage of the Fast Fourier Transform(FFT) and 3-Level technology, the SFR-APF Active ...

Frequency: 50, 60 Hz
Voltage: 400, 690 V
Primary current: 30 A - 150 A

... series Active Harmonic Filter is a new type of power quality improvement products for the harmonic distortion in the circuit. With the advantage of the Fast Fourier Transform(FFT) and 3-Level technology, the SFR-APF Active ...

Frequency: 50 Hz
Voltage: 300 V - 720 V
Primary current: 6 A - 400 A

Design : Universal horizontal high-performance two-stage filter. Typical Applications Variable speed electric drive systems/motor drives primarily for industrial use. Various industrial applications, ...

Frequency: 50 Hz
Voltage: 380 V - 520 V
Primary current: 5 A - 200 A

Universal compact thin-walled filter DAQI ® EMC filters are essential devices that prevent interferences in machines and systems. They reduce the interference emissions while improving immunity from ...

Frequency: 50 Hz
Voltage: 300 V - 720 V
Primary current: 1 A - 40 A

... for low current and low power, with small size, light weight, and high cost-effectiveness. EB11 has excellent broadband filtering effect, suitable for broadband strong electromagnetic interference application environment. EB12 ...

With the development of power electronic technology, the application of power electronic equipment, such as all kinds of rectifier, is widely used in industry, traffic and domestic appliance, and the ...

Frequency: 50, 60 Hz
Voltage: 400, 690 V
Primary current: 200 A

Active Power Filter (APF): Model Number: APF 3P3W 50A – 200A, APF 3P4W 50A – 200A Nominal Capacity: 50 A – 200A Nominal Voltage: 220VAC, 400VAC, 690VAC Nominal Frequency: 50HZ/60HZ Installation method: Stand, Wall Mount ...

Frequency: 50 Hz - 60 Hz
Voltage: 220 V - 690 V
Primary current: 100 A

Active Power Filter (APF) Model Number: APF 3P3W 50A – 200A, APF 3P4W 50A – 200A Nominal Capacity: 50 A – 200A Nominal Voltage: 220VAC, 400VAC, 690VAC Nominal Frequency: 50HZ/60HZ Installation method: Stand, Wall Mount Application ...

Frequency: 50, 60 Hz
Voltage: 400, 690 V
Primary current: 150 A

Active Power Filter (APF): Model Number: APF 3P3W 50A – 200A, APF 3P4W 50A – 200A Nominal Capacity: 50 A – 200A Nominal Voltage: 220VAC, 400VAC, 690VAC Nominal Frequency: 50HZ/60HZ Installation method: Stand, Wall Mount ...

Nominal inductance: L1/L2 11mH Rated current: 5Arms @50Hz Ripple current: L1 4.5Arms @1.5kHz Nominal capacitance: 6.8 uF Rated voltage: 680Vdc Environment : PD3A Weight : 15 Kg Fire/smoke standard: NFPA 130/EN45545-2

Frequency: 50 Hz
Voltage: 380 V
Primary current: 188 A

Sikes passive harmonic filter is designed for almost any kind of electronic applications with six pulse front end rectifiers . The filter can efficiently reduce the harmonic current distortion ...

Frequency: 50 Hz
Voltage: 400 V
Primary current: 100 A

EMI/EMC filter dedicated for Rail and transportation . The train electrical system is very complex with many big power electrical devices resulting in severe electromagnetic interference . This products is specially designed ...

Frequency: 50 Hz
Voltage: 400 V
Primary current: 10 A

Optimize harmonic performance Advanced Harmonic Filter PHF 005/010 is a cost-effective total solution. Compared to traditional harmonic trap filters PHF offers a smaller foot print and higher harmonic ...

Frequency: 500 kHz
Voltage: 70, 40 V
Primary current: 10, 20 A

SynQor provides EMI filters for the Hi-Rel series DC-DC converters. All EMI filters provide >50dB or >80dB differential mode attenuation (model dependent) and >60dB common mode attenuation and include ...

Frequency: 500 Hz
Voltage: 400, 500 V
Primary current: 3, 2, 1 A

SynQor provides EMI filters for the Hi-Rel series DC-DC converters. All EMI filters provide >50dB or >80dB differential mode attenuation (model dependent) and >60dB common mode attenuation and include ...

Frequency: 250, 500 kHz
Voltage: 40 V - 210 V
Primary current: 70, 10, 40, 30 A

SynQor provides and DC-DC EMI filters for the Mil-COTS series converters. All EMI filters provide differential mode attenuation and common mode attenuation (model dependent) and include stabilizing bulk ...

All ROPEX temperature controllers require a line filter in order to comply with EMC directives and ensure CE conformity. Line filters damp the reaction of the phase control on the line and protect the ...

3-Phase Filters LF-10520 rated current 10 A @ 50°C LF-20520 rated current 20 A @ 50°C LF-30520 rated current 30 A @ 50°C LF-50520 rated current 50 A @ 50°C

Frequency: 50 Hz - 60 Hz
Voltage: 520 V
Primary current: 8 A

... Benefits Increase in the interference immunity of the connected equipment Efficient filter effect against line-bound interference emissions Single-stage filter concept Reduced leakage current ...

Frequency: 50 Hz - 60 Hz
Voltage: 400 V - 600 V

Matrix AP Harmonic Filters Product Overview The Matrix AP Harmonic Filter with MTEs innovative adaptive passive technology*, is the most advanced harmonic filter that provides improved ...

... Guaranteed results Unlike other harmonic filter technologies, the performance of MTE Matrix Harmonic Filters is guaranteed! On AC variable frequency, variable torque drive applications (fans & pumps), ...

Matrix Filters® Product Overview MTE Matrix Filters solve the problem of harmonic distortion on virtually any two or six pulse rectifier. These power supplies are commonly found in electronic ...

Frequency: 320 MHz - 2,500 MHz

... example in cordless telephones and mobile transceivers there is a need of high selectivity RF filter circuits. We have developed a series of helix filters providing an improved performance in such applications. At ...

Frequency: 915 MHz
Voltage: 5 V

SAW Filter SAW Filter, usually called SAW, makes use of the piezoeletricity effect, to convert the input signal into mechanical energy with input and output transducer. After a procedure of processing, ...

Frequency: 4 kHz
Voltage: 200 V - 690 V
Primary current: 12 A - 1,500 A

The DU/dt 12A-3000A Trafox filters is manufactured by MUUNTOSÄHKÖ OY - TRAFOX, and decreases the insulation stress of motors by lowering the dU/dt value of the variable speed drive output voltage. It can be utilized with ...

Frequency: 1.5 kHz - 4 kHz
Voltage: 380 V - 500 V
Primary current: 10 A - 460 A

The Sine series is manufactured by Trafox, and are filters which eliminates the additional voltage stress from the drive output voltage. The filters help the to increase the lifetime of the motor.The ...

The series of Harmonic filter reactors, which is manufactured by Entes, is device that is suitable for use in serial connection with capacitor banks in power factor correction components. By utilizing these kinds of reactors, ...

Frequency: 400 Hz
Voltage: 250 V
Primary current: 16 A

RF filters which provide high attenuation in both differential and common mode. Their extended low frequency performance makes them particularly suitable for industrial frequency converters, motor drives and switch mode ...

Frequency: 60, 50 Hz
Voltage: 300, 520 V
Primary current: 3 A - 20 A

• Line filter as standard, industrial and medical version • 1 stage • Filter with standard or high attenuation (HP) Unique Selling Proposition • Compact single-stage filter • Various ...

Modular Jack Filters, 8-Pin Jack, 8 Loaded Positions, RJ45 Connector Input, PCB Mount Output, Filtered, None, None, Ethernet Magnetics • TE Internal Description: DISCR.ETH.MAG. 10/100 SINGLE SMT • Filter ...