- Electricity - Electronics >
- Switch and Relay >
- Switch
Switches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Primary current: 4 A
Voltage: 230, 24 V
• - Thermoplastic enclosure • - Double-insulated • - 52 mm x 90 mm x 30 mm • - Universal coding • - Long life • - High level of contact reliability with low voltages and currents • - Insensitive to soiling • - Slotted holes for ...
SCHMERSAL
Primary current: 3 A
Voltage: 24, 230 V
Operating temperature: -40 °C - 70 °C
... function range is also divided into two basic versions: the emergency-stop, designed as a pull-wire switch, and the position monitoring. The basic switch on the position monitoring version can be flexibly ...
SCHMERSAL
Primary current: 1,500 mA
Voltage: 24 V
Operating temperature: -25 °C - 70 °C
... and intralogistics The SSB-R sensor box detects the field of suitable actuator magnets on four independent tracks and switches the signal status on pass-by. This level change, which occurs on rapid pass-by, is retained ...
SCHMERSAL
Primary current: 15 A
Voltage: 120, 240, 480 V
The CLIPPARD ES-1 Series Switches are designed primarily to coincide with the MPA series actuators. Made from high-grade materials, it ensures serviceability and reliability in delivering optimum results. Its portability ...
Primary current: 3 A
Voltage: 30, 125, 250 V
Clippard MAS series switches (air to electric switches) use a standard miniature single pole double throw (SPDT) electrical switch which is UL, SEMKO, VDE and CSA certified. The range of switch ...
Primary current: 5, 3 A
Voltage: 125, 250, 30 V
... has sub-miniature air switches. These one of a kind switches use a standard sub-miniature single pole double throw electrical switch certified UL and CSA. These highly flexible and reliable switches ...
Honeywell's MICRO SWITCH CPS Series Cable-Pull Safety Switches provide a readily accessible emergency stop signal, a cost-effective means compared to using multiple emergency stop push-buttons. The CPS ...
S46 and S46T Microwave Switch Systems are designed to simplify the automated switching needed to test a wide range of RF and telecommunication products and devices. The S46 can control 32 relay contacts in a package as ...
Primary current: 10 A
Voltage: 240 V
The SKT safety switch is compact, lightweight, easy-to-install unit for small areas and is thus ideal for applications demanding small switches. Not just small, it is a smart safety switch with a separate ...
BERNSTEIN AG
Primary current: 10 A
Voltage: 240 V
... version of a safety switch featuring a separate actuator. Its dimensions (excluding the actuating head) correspond to EN 50047 requirements. The actuating head, which has two actuator openings, is rotary mounted. The ...
BERNSTEIN AG
Magnetic Safety Sensors BERNSTEIN offers the user coordinated coded magnetic switches and corresponding actuators. With suitable evaluation (e.g. BERNSTEIN MÜZ), the sensor fulfils the requirements of DIN EN 60947-5-3 ...
BERNSTEIN AG
With closed-circuit current or open-circuit current principle Rotatable actuating head made of metal Mechanical release on the front Particularly space-saving design Suited for applications up to Performance Level PL d
Reliable protection of extensive hazardous areas For use on conveyor systems Robust design for use in harsh industrial environments Easy setting of the rope tension Integration into AS-i networks
Interface RF Connectors with Switch, 3.9mm Height, DC to 6GHz Interface RF Connector with Switch, 3.9mm High, DC to 6GHz 1. Low insertion loss Typically, 0.08dB at 1GHz Typically, 0.1dB at 2GHz 2. ...
Diameter / length: 18, 15 mm
Width: 18, 26 mm
Height: 36 mm
SI-RF Series safety switches utilize RFID technology to monitor doors, gates, and other movable mechanical safeguards that separate personnel and equipment from a hazard. They will send a signal to the machine control ...
BANNER ENGINEERING CORP.
Primary current: 4 A
Voltage: 10 V - 30 V
In-line capacitive touch switch with M12 connectors Easy installation with clip-in brackets and durable M12 in-line connection Customizable intensity control and capability to dim lights using PWM output Bright indication ...
BANNER ENGINEERING CORP.
K50 Pro touch buttons combine proven touch technology and ruggedness with the added versatility of RGB LEDs. K50 Pro touch buttons are compatible with the Pro Editor software for easy customization. - Bright LED indicators combined ...
BANNER ENGINEERING CORP.
ExCos/ExBin Range HVAC sensors and switches. ExCos analogue sensors and ExBin binary switches are designed for direct use in hazardous locations. No additional modules in the panel required. No intrinsically safe wiring ...
... from head switch. Intended for heavy loaded industrial machines with fast rundown time. The device comes with the key operating switches such as XCSA, XCSB, XCSC with lesser speed rundown ...
Telemecanique Sensors
Primary current: 10 A
Voltage: 500, 600 V
Operating temperature: -25 °C - 80 °C
Functions - Type 2 interlock device with mechanically actuated position switch with low-coded actuator acc. to DIN EN ISO 14119 Mission time - 20 years, EN ISO 13849-1 B10d - 2,000,000 number of cycles Usage category ...
Primary current: 10 A
Voltage: 500, 600 V
Operating temperature: -25 °C - 80 °C
... weight - 294 g Housing color - Gray Red Type of fastening - Through-hole mounting Type of cable entry - M20 x 1.5 Switch type - Interlock device without guard interlocking, ISO 14119 Switching principle - ...
Primary current: 10 A
Voltage: 500, 600 V
Diameter / length: 93 mm
Functions - Type 2 interlock device with mechanically actuated position switch with low-coded actuator acc. to DIN EN ISO 14119 Mission time - 20 years, EN ISO 13849-1 B10d - 2,000,000 number of cycles Usage category ...
Our Grip Switches can be used as part of the conditions required to allow safe working inside a machine guard. They are lightweight and ergonomically designed for easy use. The standard model includes two independent ...
Allen-Bradley
Voltage: 15 V
Diameter / length: 6 mm
Operating temperature: -25 °C - 85 °C
Encoder with integrated PCB (with and without debouncing function) and various mechanical interface options Product Features Swiching torque up to 4.5 Ncm Various options and customizations available Various mechanical ...
Elma Electronic AG
Primary current: 10 mA
Voltage: 15 V
Diameter / length: 6 mm
Coded switch with two shafts, HEX or Gray coding with up to 16 positions on outer and 2 or 3 positions on inner shaft Product Features 22.5° indexing angle (36° indexing angle on request) Various options ...
Elma Electronic AG
Primary current: 200 mA
Voltage: 42 V
Diameter / length: 1.8, 3 mm
Coded switch with push function, HEX or Gray coding, push force up to 14 N and up to 3.5 Ncm switching torque Product Features 22.5° or 36° indexing angle Various options and customizations available ...
Elma Electronic AG
Primary current: 6, 3 A
Voltage: 250, 230 V
Operating temperature: -20 °C - 90 °C
... self-extinguishing UL 94 V-0 Degree of protection - IP 65 to IEC/EN 60529 B10d (10 % load) - 200 000 TM - max. 20 years Switch insert - 1 x Ex 14 Contact material - silver Switching system - slow action, positive ...
steute Schaltgeräte
Primary current: 0.02 A - 15 A
Voltage: 8 V - 500 V
Best-selling Basic Switch Boasting High Precision and Wide Variety • A large switching capacity of 15 A with high repeat accuracy. • A wide range of variations in contact form for your selection: basic, split-contact, ...
OMRON
Primary current: 1 mA - 100 mA
Voltage: 3 V - 30 V
Ultra-small, Low-cost, Push-operated Switches • All-in-one design means fewer parts are required. This product delivers high reliability at a low cost. • Uses long-lasting resin springs to achieve a long mechanical ...
OMRON
Primary current: 5, 3 A
Voltage: 250, 30, 125 V
Separate Construction with Cylindrical 16-dia. Body • Same separate construction as the A16-series Pushbuttons with Miniature Design of 28.5 mm • The same contacts can be used for both standard loads and microloads. • Oil-resistant ...
OMRON
Voltage: 230 V
The mechanical safety switches PSENmech are suitable for safe monitoring of a movable guard. If guards are opened, the safety switches PSENmech are tripped. The hazardous machine movement is then brought ...
PILZ
... assembly line or machine: where safety in the production area is concerned, the safe rope pull switches PSENrope are a proven, reliable solution. PSENrope switch off functional processes by manual operation. PSENrope ...
PILZ
Primary current: 10 A
Voltage: 240 V
Operating temperature: -30 °C - 80 °C
Mechanical safety switch, with radius actuator, contacts: 1 N/O, 1 N/C. Technical data Utilisation cat. AC15/DC13sta. - EN 60947-5-1 Environmental data Protection type, housing - Mechanical data Connection ...
PILZ
Useful model for convenient installation Compact plastic-type casing Firm as well as mobile actuators A single cable access gland M16 x 1.5 Sluggish motion switching components having 2 or 3 connections
SICK
Primary current: 0.3 A - 15 A
Voltage: 30 V - 250 V
FEATURES Depth of 18.6 mm saves space.This space-saving switch has bodydimensions of 25 (W) x 14.8 (D) x 18.6(H). (63% that of our previous T-15 seriesswitch. PRECAUTIONS WHENUSING CADMIUM-FREECONTACT TYPE Models ...
Primary current: 4 A
Voltage: 28 V
Operating temperature: -54 °C - 121 °C
... introducing our own branded RS PRO Miniature Micro Switch where current mechanical energy applied to an actuator provides a high-precision electrical output. The actuator type comes as a basic switch ...
RS PRO
Primary current: 0.01 mA - 100 mA
Voltage: 0 V - 35 V
Diameter / length: 0.1 mm
MICON 5 tactile switches offer extreme switching reliability, with a very small space requirement. They can be arranged individually, in rows or as key blocks. For use beneath overlays, we recommend combining the MICON ...
RAFI GmbH & Co. KG
Primary current: 1 mA - 5,000 mA
Voltage: 12 V
Operating temperature: -40 °C - 120 °C
Johnson Electric’s automotive switch product line under the Saia-Burgess brand sets a new standard for high reliability in door locking systems. The technology leading line of L16 microswitches increases temperature range, ...
Johnson Electric
Voltage: 4.5 V - 16 V
Operating temperature: -40 °C - 85 °C
Panasonic’s ASQMR1 Series Seal Type Snap Action Switches feature an installed Resistor that protects circuits thus preventing malfunctions such as disconnection and wiring short circuits. Resistor installed Switches ...
Panasonic Electric Works Corporation of America
... Enabling Switches The SFEN series safety grip type enabling switches can be used to manually control operation within a hazardous area during maintenance in order to prevent personal injury in the ...
Autonics
Safety Key Selector Switches The SF2KR series safety key selector switches are installed in safety fences or industrial equipment doors to control operation of machines, offering additional ...
Autonics
... series safety door switches can detect opening and closing of doors in machines. The head can be rotated to change the insert direction of the operation key from 5 directions, with 6 available operation key types. Also, ...
Autonics
Diameter / length: 34 mm
Design - raised Mounting cut-out - Ø 22.3 mm Dimensions - Ø 34 mm Front bezel colour - Black Housing colour - Yellow Lens colour - Red Lens optics - opaque Weight - 0.043 kg Schaltelement max. number of switching elements - 6
EAO France
Primary current: 5 A
Voltage: 250 V
Mounting Mounting cut-out - Ø 22,3 mm Design - raised Front Front dimension - Ø 22 mm Other Attributes Weight - 0,080 kg Operating-/Indication part Lever colour - black Connection Method Terminal - Solder 2.8 x 0.5 ...
EAO France
Primary current: 10 A
Voltage: 250 V
Mounting Mounting cut-out - Ø 33,5 mm Front Front dimension - Ø 40 mm Front ring colour - natural anodized Other Attributes Weight - 0,23 kg Operating-/Indication part Lever colour - black Contact material - Silver
EAO France
Primary current: 1 A - 3 A
Voltage: 240, 230, 120, 110 V
S800 Series snap-action switches feature positive opening operation, which guarantees a reliable opening of NC contacts, even when welded due to a short-circuit or current overload. That is why S800 Series snap-action ...
Schaltbau GmbH
S804 Series switches add to the product line featuring the same snap-action mechanism and positive opening operation as the S800 Series switches. They differ, however, in form ,dimensions and position of the screw-type ...
Schaltbau GmbH
Primary current: 0.5 A - 5 A
Voltage: 60, 120, 230, 240 V
Unlike series S800 and S804, Schaltbau’s S814 Series snap-action switches do not possess positive opening operation. They normally come with silver-plated contacts, but are also available with gold contacts. Due to their ...
Schaltbau GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining