Processors and Controllers (MPU, MCU, DSP)

3V to 60V Operating Voltage Range Integrated 10-bit ADC 3-Wire Serial Interface Microcontroller Compatible Low Power Minimum External Components TSOT23 RoHS Compliant Package Applications Lighting Management Current Shunt ...

The ADuC841/ADuC842/ADuC843 are complete smart transducer front ends, that integrates a high performance self-calibrating multichannel ADC, a dual DAC, and an optimized single-cycle 20 MHz 8-bit MCU (8051 instruction set compatible) on ...

The CS48L10 ultra low power voice and audio DSP chip has been designed to bring best-in-class audio processing capability to mobile/portable applications, while having minimum impact on overall system power consumption. The CS48L10 provides ...

The CS49834/44 Audio DSPs provide high capacity processing for today’s new generation of surround sound applications. The DSPs support all legacy DVD audio codecs and all Blu-ray Disc® audio formats, along with enough DSP capacity ...

The i9600 is a 9600baud half-duplex serial modem controller suitable for use with wideband receivers, transmitters and transceivers. It takes care of preamble, synchronisation, bit balancing and error checking and enables a transparent ...

The M48A is a half-duplex serial modem controller suitable for use with narrow band receivers, transmitters and transceivers. It supports a maximum transparent data throughput of 4800baud while baseband modulation frequencies do not exceed ...

The Narrow band Evaluation Kit (NBEK) IC can be used as 1200baud half-duplex serial modem suitable for narrow band receivers, transmitters and transceivers (or any RF modules with >5kbps data rate). It takes care of preamble, synchronisation, ...

Applications Absolute and incremental angle interpolation from orthogonal sinusoidal input signals Interpolating interface for MR sensors and optical analog encoders Features Real-time interpolator with programmable resolution of up ...

The R3DIP Board (Arduino UNO-compatible) is the right microcontroller for beginners who want to get into the programming world quickly and easily. Its ATMega328 microcontroller gives you enough performance to implement your ideas and ...

The launch of the new ZMS-05 SoC (System-On-Chip) and the new Zii Platforms usher in the new era of StemCell Computing. The ZMS-05 processor combines a power media processing array with dual ARM cores, a rich set of integrated peripheral ...

The RX family consists of four product series: the flagship RX700 series, with the fastest performance and most advanced functions; the standard RX600 series; the RX200 series, which delivers an optimal balance of power efficiency and ...

8-bit MCUs with High-Resolution Analog and Low Power The PIC16F18446 8-bit product family features high resolution, Intelligent Analog and Core Independent Peripherals (CIPs) for sensor end node applications. The family features 12-bit ...

The MAC57D5xx MCU family is a multi-core architecture solution for mid-range instrument cluster and industrial applications. This MCU is based on the Arm® Cortex®-M processor for real-time and Cortex-A processors for applications and ...

The PIC18-Q71 product family combines powerful Core Independent Peripherals (CIPs) and a high level of analog integration to simplify sensor interfacing and analog measurements, optimize system performance and reduce BOM cost. PIC18-Q71 ...

● Arm ® Cortex®-M3 core. Operation frequency: 1 to 40 MHz. Operation voltage: 2.7 to 5.5V ● Code flash: 32 to 128KB. Data flash: 8 to 32KB. ● Package: 32-pin to 100-pin. 11 types of packages are available. Applications Widely used ...

BLDC Shield for Arduino with TLE9879QXA40 is designed to drive BLDC motors in combination with an Arduino compatible baseboard. The Shield is flashed with several motor control algorithms (sensorless FOC, Back EMF, hall sensor based block ...

The SPC5 family of 32-bit Automotive Microcontrollers is designed to accommodate a wide range of automotive applications ranging from Gateways, Electro Mobility, and ADAS to Engine and Transmission control, Body, Chassis and Safety. Based ...

The MAX17499/MAX17500 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX17499 is well suited for low input voltage (9.5V DC to ...

SHARC+ Core infrastructure 400MHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, ...

The DE70322T is a complete AIS Class B (IEC 62287-1) technology demonstrator/reference design package that will enable manufacturers to quickly deploy an AIS Class B transceiver to the market. This flexible platform provides a new low ...

Flexible, powerful and functional safety compliant SC controllers join the portfolio of PLUS+1® Compliant components. Dual microprocessors provide enhanced performance, larger memory, and redundant control of outputs for safety function ...

•Enhanced on-chip 8501 Micro controller, more built-in resources,8 times speed of standard8501 on same main frequency •Large capability built-in program/data memory, FLASH program memory E2PROM supports serial ISP programming and code ...

32 switchable tones (click here for tones) Compatible with all SelecTone® equipment Plug-in installation RFI and EMI shielded CSFM Approved UL and cUL Listed UL and cUL Listed Features Model UTM is a microcontroller-based ...

Features • CPU32+ Processor (4.5 MIPS at 25 MHz) – 32-bit Version of the CPU32 Core (Fully Compatible with the CPU32) – Background Debug Mode – Byte-misaligned Addressing • Up to 32-bit Data Bus (Dynamic Bus Sizing for 8 and 16 Bits) • ...

Our Training System for Microcomputer Technology is primarily designed for use in vocational training. ETS DIDACTIC MC einbauenFundamentals of digital technology Graphic representation of programs Structure and function of microcontrollers, processors ...

Small and the smallest of them all DP Slave VPC3+S profichip´s VPC3+S is a communication chip with 8 Bit parallel, SPI or I2C Microprocessor interface for intelligent PROFIBUS slave applications. The VPC3+S handles the message and address ...

Features 3V to 60V Operating Voltage Range Integrated 10-bit ADC 3-Wire Serial Interface Microcontroller Compatible Low Power Minimum External Components TSOT23 RoHS Compliant Package Applications Lighting Management Current ...

The Amptek DP5 is a state of the art, high performance, low power digital pulse processor. It digitizes the preamplifier output signals, replacing both the shaping amplifier and MCA in a traditional, analog spectroscopy system. The DP5 ...