|
|
| Products 181 to 210 of 341 |
Eurotech offers a comprehensive range of industrial PC104, embedded PC and single board computer products. These are supported by a wide selection of Development Kits for the leading embedded operating systems. The functionality of the processor boards can be expanded using PC/104 and/or PCI I/O and comms modules.
Products
GEMINI
5.25" Embedded Intel Core 2 Duo/Solo SBC
SBC-GX533
EBX AMD Geode GX 533 SBC
APOLLO
EBX format Intel Pentium M/Celeron M based SBC
PEGASUS
PC/104 format 133MHz AMD ELAN SC520 SBC
TITAN
PC/104 format 520MHz PXA270 XScale SBC
QUANTUM
PXA270 based SO-DIMM format SBC
ZEUS
EPIC format 520MHz Intel PXA270 XScale SBC
VIPER
PC/104 format 400MHz Intel PXA255 XScale SBC
VIPER-Lite
PC/104 format 200MHz Intel PXA255 XScale SBC
VULCAN
PC/104 format 533MHz Intel IXP425 XScale communications controller
VULCAN-Lite
PC/104 format 66MHz Intel IXP420 XScale communications controller
|
|
MOPS PC/104 CPU Modules
MOPS PC/104 family present the largest consistent single board family - full accessory re-use is a fact - making easiest up and downgrades very easy and extremely cost effective. Choose from lowest power up to Pentium® M.
MOPS serve every performance class highly reliable - full featured.
PC/104 SBC and Peripherals
Kontron Standalone Single Board Computers serve in every format,even with consistent product families that allow full accessory and chassis re-use. Kontron is your best choice for standalone boards - off-the-shelf - in all performance classes, in all formats. Time to market is zero - don't wait, start today!
|
|
PC/104-SK-PLUS2, Starter-Kit for PC/104 incl. PC/104-PCI/ISA adapter.
Please use PC/104-SK-PLUS3 !
The basic single boards contain:
A PC/104, ISA and PCI-Bus slots electrically coupled, a plug for power supply and a keyboard connection.
3.5“ fl oppy drive interface
Mains adapter 110-230 V AC
|
|
|
|
|
|
Addi-Data presents the new 32-bit digital input/output board PC104-PLUS1500 which has 32 I/O. The PC104-PLUS1500 is equipped with both PCI and ISA connectors on the circuit board. The direct connection to SPS controls is guaranteed because the I/O channels correspond to the industrial standard +24 V for “logic 1”. The input voltage is designed precisely so that the PC104-PLUS1500 switches reliably to „0“ or „1“, even in the case of disturbances. With 0-14 V as “low” and 19-30 V as “high” the ranges are set very high. In order to ensure that the board is interference-free and thus the flawless use in applications, the 32 digital inputs/outputs are isolated up to 1000 V and protected against fast transients, electrostatic discharge and high-frequency EMI.
Two digital inputs are interruptible and thus the main programs are relieved of the standard monitoring and evaluation tasks. In order to avoid undefined states the outputs stay on “status 0” when the PC is started.
The High-Side switch outputs that are available on the PC104-PLUS1500 are designed for inductive loads and PTC resistors, in contrast to the open collector outputs. They work with a nominal voltage of 24 V and an output current of 150 mA and are protected against short-circuit, overtemperature and undervoltage. Additionally, 3 timers or counters are available, whereas Timer1 can work as programmable watchdog for resetting the outputs. A status register that can be read out allows to detect short-circuit or overtemperature.
|
|
Product Range:
AIM104-IN16 16 opto-isolated inputs
AIM104-IO32 32 TTL compatible digital I/O
AIM104-RELAY8-IN8 8 changeover relays and 8 opto-isolated inputs
AIM104-OUT16 16 opto-isolated Darlington driver outputs
AIM104-OPTO-IN8/OUT8 8 opto-isolated inputs and 8 opto-isolated outputs
AIM104-ADC16/IN8 Isolated 16 channel 12 bit ADC and 8 channel digital input
AIM104-MULTI-IO Isolated 16 channel 12-bit ADC, 2 channel 12 DAC and 8 channel digital input
AIM104-MOTION-1 8-bit PC/104 module providing single axis stepper / DC servo motor control with on-board drivers
AIM104-MULTI-IO Isolated 16 channel 12-bit ADC, 2 channel 12 DAC and 8 channel digital input
CTR-1462 Galvanically isolated DIO, 24 inputs and 24 outputs
DAQ-1278 Cardbus controller with 1 x 32-bit slot for type I, II and III card support
|
|
Micronix PC/104 boards is European manufactured expansion modules for the PC/104 bus, designed for industrial and process control systems and for automotive applications.
|
|
|
Advantech is a global leader in plug-in I/O card design and manufacturing, providing a full range of industrial data acquisition (DAQ) and control products which are widely used in industrial and laboratory applications such as: monitoring, motion control, data acquisition, and automated testing. There are six major categories - CompactPCI, PCI-bus, ISA-bus, USB-bus, PC/104 modules, and Motion Control I/O products. With rich wiring terminals and extensive software support, Advantech provides reliable, efficient, and cost-saving industrial solutions. Moreover, Advantech’s DAQ products could simply be bundled with versatile industrial PC chassis, backplanes, CPU modules, flat panel monitors and embedded automation computers.
|
|
|
|
|
|
PCI-X BUS Serial Port Expansion
RocketPort INFINITY cards are flexible, reliable, and high-speed in-server serial port expansion cards. They provide connectivity for applications like factory systems, SCADA systems, point-of-sale, telecommunications, medical systems and traffic equipment. Connect serial devices like printers, scanners, cameras, and LCD screens.
The RocketPort INFINITY product family is Comtrol’s next generation multi-port serial adapter. Products are fully compatible with systems that have 32 or 64 bit 3.3 or 5 volt uPCI and PCI-X expansion slots. The INFINITY design maximizes serial performance via Comtrol’s exclusive high-performance Unity ASIC chip. Cards are low profile and are for use in both standard PCs and low-profile servers. Quad-cabled and octa-cabled products reach serial communication speeds of 921 Kbps and products with an interface communicate at up to 460 Kbps. All products support software-selectable RS-232/422/485 serial communication modes. The product family includes models from 4-ports up to 32-ports with up to 128-ports per system. They provide an infinity of options for connecting and communicating with your devices.
Highlights
32 or 64 Bit 3.3 or 5 Volt uPCI or PCI-X Connectivity
Low-profile or Standard Height Compatible
RS-232, RS-422, RS-485 Software-selectable
4- to 32-Port Interfaces
High Performance Cards with Speeds up to 921 Kbps
RoHS Compliant
Microsoft Certified Drivers for Windows VISTA, Windows XP and Windows Server 2003
|
|
|
|
|
|
Protech Systems Co., Ltd., the leading provider of industrial computers, continues to innovate with the introduction of the powerful and cost-effective PCI-381LF half-size CPU card. Powered by an onboard VIA Mark 533 or 800 MHz CPU and VIA VT828626B Southbridge, the PCI-381LF delivers reliable, high performance operation with the durability needed by a range of industrial and embedded computing applications.
The PCI-381LF÷Õ onboard VIA Mark 533 MHz CPU provides great fanless performance with superb vibration resistance. The integrated graphics controller offers 18/24-bit TTL and an 18/36-bit dual-LVDS, LCD or CRT display output ideal for graphics-driven control and automation processes. The PCI-382LF CPU card features a 133 MHz Front Side Bus and supports a maximum of 512 MB in a single PC100/133 SODIMM SDRAM. A 40-pin IDE connector is onboard for higher-capacity hard disk drives, while a PC/104 slot provides scalable expansion for feature upgrade. The PCI-382LF offers a 16-level selectable watchdog timer and reset/NMI functionality for unattended application support. The PCI-382LF can support AT or ATX power. Wake-on LAN supports remote booting with ATX power.
|
|
|
Designed for requirements from 4 to 8 ports, these intelligent serial I/O adapters dramatically increase data throughput and enhance overall system response.
|
|
FAS-PCI Main Board
Selectable 64-point I/O to Input/Output/Latch
I/O main board using parallel direct connect type
Input/Output isolated by photocoupler
Slave module selectable Input/Output/Latch function
|
|
CANnes
Description
CAN-Bus PCI-Card with open source Linux driver
The CANnes card is a PCI card which provides a simple, easy to use CAN interface. It is equipped with a male and a female 9 pin Sub-D connector with standard CAN pin assignments. CAN bit rates between 10 and 1000 kBit/s (1MBit/s) are possible. The industry standard CAN controller SJA1000 is used together with the CAN bus driver 82C250 and optical isolation between the CAN controller and the CAN bus driver. A 120 ohms termination resistor is also provided. This resistor can be switched on and off either by a software controlled relay. Device drivers and function libraries are provided for the Windows (98/ME/2000 and NT4) operating systems and also for the Linux operating system. The CANnes cards is CE-approved and also meets FCC specifications. It can be used with every PC which is equipped with PCI slots fulfilling at least the PCI 2.1 standard.
|
|
|
|
|
|
The new products in the PC-RSD-PCI Series are plugged each into a PCI bus slot on the PC to serve as a new type of silicon disk drive using a CompactFlash (CF) card in the same as a hard disk.
The PC-RSD-PCI Series has two CF card slots on the board, one of which comes standard with a CF card. The other slot is available between the PCI board brackets, allowing an additional CF card to be plugged and unplugged as a removable disk with the board installed on the PC. The second slot can extend the range of applications, such as separating the OS and data areas.
The PC-RSD-PCI board uses a highly reliable CF card (fixed disk mode), which can be partitioned into two or more drives. The PC-RSD-PCI board can also accommodate an optional additional CF card to add an additional drive or drives (thereby increasing the total capacity), in which case the two CF cards can be configured into a RAID by striping (RAID level 0), mirroring (RAID level 1), or spanning (JBOD) using a utility. The PC-RSD-PCI Series is a line of 1 GB, 2 GB, and high-capacity 4 GB and 8 GB models. These are designed environment-conscious to be lead-free and to (be scheduled to) conform to the RoHS Directive.
|
|
|
|
|
|
The interference-free PCI Express boards with numerous protective measures are especially suited for applications in rough industrial environments.
Analog multifunction board APCIe-3121:
- 16 SE/8 diff. or 8 SE/4 diff. inputs, 16-bit
- 8/4 analog outputs, 16-bit
- Optical isolation
- PCI express DMA, programmable Gain
- Trigger functions, timer, watchdog
- 8 digital I/O, 24 V, optical isolated
1- to 8-port serial interface APCIe-7xxx:
- Serial interfaces with modules: RS232, RS422, RS485, 20 mA CL
- Free mode configuration for each port
- with/without optical isolation
- 128-byte FIFO buffer for each port
Multifunction counter board APCIe-1711: for many counting applications on the same hardware base – Programmable FPGA modules
- Functions: Incremental counter, SSI, counter /timer, pulse acquisition, frequency, pulse width, period duration , velocity measurement, PWM, BiSS-Master, …
- Function selection through software
- Optical isolation 1000 V
- Customer-tailored functions
Digital I/O boards APCIe-1532 and APCIe-1516, 24 V:
- 32 or 16 I/O, 24 V
- 15 interruptible inputs
- Reliable switching to „0“ or „1“, even in case of interferences
- Optical isolation 1000 V
- Output current per channel 500 mA
Free drivers for standard operating systems and programming samples.
|
|
PCI Express BUS Serial Port Expansion
RocketPort EXPRESS serial cards are flexible, reliable, and high-speed in-server PCIe slot serial port expansion cards. They provide serial connectivity for applications like factory systems, SCADA systems, point-of-sale, telecommunications, medical systems and traffic equipment. Connect serial devices like printers, scanners, cameras, and LCD screens.
Highlights:
- PCI Express x1, x2, x4, x8, x12 and x16 Lane Connectivity
- Low-profile or Standard Height Compatible
- RS-232, RS-422, RS-845 Software-selectable
- 4 to 32-Port Interfaces
- High Performance Serial Cards with Speeds up to 921 Kbps
- RoHS Compliant
|
|
|
The Imaging Source - an international manufacturer of industrial cameras, video converters and frame grabbers announces today a new series of PCI-Express frame grabbers. The models ship with a number of different video inputs. Some models are available for low profile PC cases. The Imaging Source frame grabbers are deployed for applications in which analog video signals (PAL, CCIR, NTSC, RS-170) need to be processed by a PC. In addition to cameras, such video input devices include ultrasound and x-ray machines. Analog cameras are not only used in legacy applications. Often they are preferred for price sensitive projects, in which long cables are required. The Imaging Source frame grabbers ship with drivers for Windows, the SDK 'IC Imaging Control' and the end-user application software 'IC Capture'. The latter is a powerful software that allows the setting of all frame grabber parameters, the display of live video stream and the acquisition of singular images and sequences.
|
|
|
|
|
|
PCI Express Communication Interface netX for AS-Interface - COMBICON 2 pin
Fieldbus technology with it various standards is an established technology and will coexist for many years beside the upcoming Real-Time systems. With collected experience in fieldbus technology over the last 15 years and more than fifty thousands sold PC cards Hilscher introduces the next generation of cifX communication interfaces: They are based on the high sophisticated netX 100 network controller and differ from each other only in the physical interface. They provide the maximum of performance, functionality and flexibility for the best price-performance ratio. A ten-year commitment of availability is guaranteed using of the Hilscher own network controller.
The protocols for cifX are provided as loadable firmware on a CD. The driver loads the firmware into the cifX during each system start-up. This is a simple way to using the card either as master or as slave. A license is required for master firmware. The license can be purchased with the cifX or at later time and is remanently saved in the card.
|
|
|
|
|
|
- 24 channels of digital I/O with selectable 3.3 V and 5 V logic levels:
- 8-bit Port A, 8-bit Port B, 8-bit Port C (may be made up of 4-bit C-HI, and 4-bit C-LO)
- Fully plug and play
- Emulates 82C55 mode zero
- Software selectable pull-up and pull-down resistor configurations
- Digital I/O lines are accessed through a 37-pin D-type connector
The PCIe-DIO24 is a 24-channel digital I/O board with selectable 3.3 V or 5 V logic levels for PCI Express bus compatible computers. The 24 bits function as an 8-bit Port A, an 8-bit Port B, and an 8-bit Port C, which may be further divided into two 4-bit ports (Port C-HI and Port C-LO).
There is a 10 kilohm pull-up/pull-down resistor network associated with each digital port. Their direction is software selectable and stored on the board, so the user can use the board in a different PC without running configuration software: simply set the board number in InstaCal.
The PCIe-DIO24 is connector and software compatible with Measurement Computing's highly popular PCI-based PCI-DIO24 and ISA-based CIO-DIO24 boards, making migration from the ISA or PCI bus about as simple as unplugging the digital I/O cable’s 37-pin connector from the old board and plugging it into the new one. The PCIe-DIO24 is also supported by the same wide variety of external relay and solid state I/O module racks.
The PCIe-DIO24 is completely plug-and-play. There are no switches, or jumpers on the board. All board addresses, interrupt channels, etc. are set by your computer's plug-and-play software.
|
|
|
|
|
|
PCI334A Four-Port High Performance WAN Communications Adapter
Our PCI334A Intelligent Synchronous WAN Communications Adapter provides four high performance synchronous/serial channels for WAN connectivity. The adapter is ideally suited for use within SS7 nodes - or as an interface to T1 routers, DSU/CSUs, frame relay access devices, high speed modems or other high speed communication devices.
The PCI334A continues Performance Technologies' role as a leading supplier of hardware, software, system solutions and technologies for embedded applications.
Highlights
Multipurpose intelligent WAN communications adapter
Four high-speed channels capable of sustaining 2 Mbps per port
Four MB of shared SRAM memory
Universal I/O supporting 3.3V and 5V
Support for 33MHz and 66MHz PCI Bus
Increased RS-232 support allowing for data transmission range of up to 100Kbps
Existing PCI334 software compatible with PCI334A
Integrated WAN Communications Software includes Radar Receiver/SBSI, HDLC, Frame Relay, LAPD and X.25
Broad operating system support includes: Solaris®, Windows®NT and Linux®
|
|
Elan offers a complete range of communications PC and Compact Flash format cards. Customized versions can also be offered if required.
You can use an Elan card to add serial ports to your mobile computer to connect to fax/modem devices, scanners, printers, digital cameras, data collection equipment, monitoring and control systems, wireless interfaces and any serial device you an think of. Because our own VPU16550 UART family is used inside they offer high speeds with low power needs, plus automatic operating system support including Windows (from 9x to CE), LINUX and Mac.
|
|
Today, the PC assumes a key position in automation technology. Together with a real-time operating system, e.g. Windows® NT, it creates an ideal hardware platform for control and visualisation of process data. By using so called SoftPLCs the PC penetrates into application areas that have been the domain of classical programmable controllers.
Fieldbus systems with remote input and output modules are used for the data transfer between the PC and the automation equipment. We offer special interface cards since the PC does not feature a direct link to the fieldbus.These intelligent cards manage the entire data transfer. Only useful data are passed onto the user applications.
|
|
ETHERNET Computer Interface
* Interface between Ethernet IP Network and Power Supply
* IP-address can be configured by user,
make use of existing networks
* 16-bit accuracy for voltage and current programming or output monitoring
* Read-back of status signals, change power supply modes like: Remote/Local
* Digital user in- and outputs (isolated)
* Software Calibration
* SCPI commands
* Internal Card available for ES150, ES300, SM800, SM1500, SM3000, SM6000
Note: internal interface cards are factory fitted and calibrated, see datasheet for ordering details.
* External module for other power supplies
* Download PDF-datasheet
* Download Software
|
|
|
|
|
|
PROFIBUS DP for LabVIEW
The COMSOFT PROFIBUS VISA Driver equips National Instrument's LabVIEW with a real-time PROFIBUS-DP connection providing a powerful extension of the application range in the test and automation sector.
The package including hardware and software is based on the COMSOFT DF PROFI II board, available in PCI, PCIe, CompactPCI and PC104+ format. These different formats as well as the real-time VISA driver concept can be integrated in different LabVIEW systems and platform combinations.
An installation in a classical PC system under LabVIEW for Windows is just as possible as in a real-time PXI system under LabVIEW RT, e.g. as a high performance PAC system for time-critical test applications or industrial automation applications.
The COMSOFT PROFIBUS VISA Driver supports DP Master and DP Slave mode. This allows data exchange with any DP Slaves as well as the integration of a complete LabVIEW system as DP Slave in an already existing PROFIBUS DP network.
The PROFIBUS DP process and diagnostic data can be accessed in a simple manner. The board initialization and the data handling are demonstrated in detailed example VIs, which also can be used for the immediate start-up of the PROFIBUS.
In addition to the standard VI interface, LabVIEW express VIs are available providing a plug and play integration of the PROFIBUS DP process and diagnostic data into the application.
|
|
LSI is the leading supplier of host-based RAID to the global PC and server markets. MegaRAID® is the preferred choice of OEMs, ODMs, system integrators and resellers worldwide for its superior performance, ease of use, and lightning fast array initialization and configuration capabilities.
LSI offers a complete selection of internal RAID adapters for direct attached storage (DAS) connectivity. You can choose from a full spectrum of adapters for the most cost- and space-sensitive implementations to high-performance solutions requiring the most advanced data protection capabilities.
|
|
|
|
|
|
SIM Reed Relay Cards
-LXI PXI VXI IEEE-488 Instruments & Switching Low Cost Uncommitted Relay Configuration
- LXI PXI VXI IEEE-488 Instruments & Switching With I2C and RS-232 Interfaces
- LXI PXI VXI IEEE-488 Instruments & Switching Simple ASCII Instruction Set
- LXI PXI VXI IEEE-488 Instruments & Switching Use High Quality Pickering Reed Relays
- LXI PXI VXI IEEE-488 Instruments & Switching Suitable For Building High Density Switching Networks
- LXI PXI VXI IEEE-488 Instruments & Switching Standard 72 Pin SIM Connector
- LXI PXI VXI IEEE-488 Instruments & Switching Special Models Available
Pickering Interfaces Series 1000 SIM Reed Relay Cards offer a choice of switching configurations using low cost industry standard SIM connectors. They are ideal for placing switching systems in fixtures close to the unit under test.
SIM Reed Relay Cards free the designer from the detail of routing complex switching circuits, you may select from a wide range of cards using the built in RS-232 and I2C interfaces.
The SIM Relay Cards are intended to be mounted on to a simple motherboard. They may be used to construct very high density switching networks.
|
|
|
|
|
|
Whichever RFID system you connect to SIMATIC PLCs, PCs or PLCs from other manufacturers: the communication module provides for the necessary adaptation. In doing so, communication modules can be employed both for production and logistics applications. With the function block FC/FB 45, the readers of all RFID systems can be handled standardized. This ensures that existing RFID applications are operational immediately and do not have to be rewritten when another reader type is used.
Optimal integration into the SIMATIC world (TIA)
- ASM 456 for PROFIBUS
- RF180C for PROFINET
- RF170C for distributed I/O ET 200pro
- ASM 475 for SIMATIC S7-300 and ET 200M
Various connector concepts (e.g. M12, RJ45 or ECOFAST) for the application connection
Comprehensive diagnostics functions
Firmware update via the SIMATIC Manager
Identical and convenient programming of all RFID systems from within the SIMATIC PLC
Easy, central management of all RFID components through the "Identification & Maintenance" functions
Connection of the RFID systems to PCs and PLCs from other manufacturers by support of the RFID standard profile
|
|
|
|
|
|
With BL ident the user is free to choose interface modules in IP20 or IP67.
Interface modules with PROFINET-DP (DPV0 and DPV1), DeviceNet, Ethernet/Modbus TCP/IP, Ethernet/Profinet and Ethernet/IP with up to 8 channels are available.
Programmable gateways enable decentral and fast signal processing.
The modular concept allows the user to add input and output modules to the interface at a later stage.
All channels operate in parallel allowing data to be transmitted simultaneously.
The diagnostics for the fieldbus, the supply voltage and the individual channels is carried out via LEDs and complemented by fieldbus-specific diagnostic messages.
Standard function modules are available for simple integration in the control and fieldbus environments.
The application of the BL ident simple module (BL20-2RFID-S, BL67-2RFID-S) is also possible. This way the communication is built on the basis of an 8-byte I/O module. The programming effort is reduced considerably. The user has the freedom to link BL ident to all standard control systems without using function modules.
|
|
Intel XScale IXP420 based Computer-on-Module. Feature optimized and price aggressive.
Intel XScale Processor IXP420
32/64MB soldered SDRAM, 4/8MB soldered Flash
Dual Fast Ethernet
2 terminal interfaces (Rx/Tx)
|
|
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm
|
|
|
|
|
|
The new products are low-profile, RS-232C serial communication boards compliant with PCI Express. The board can expand asynchronous RS-232C serial communication ports on a PC with a PCI Express compliant slot. The board is available in three models different in the number of on-board RS-232C serial communication ports: 1-channel type "COM-1C-LPE", 2-channel type "COM-2C-LPE", and 4-channel type "COM-4C-LPE".
The three new models support high-speed communication at up to 921,600 bps. The bundled driver software can be used for Windows and Linux to recognize the on-board ports as OS's standard COM ports, allowing them to be set as COM1 to COM256. The board has high-capacity FIFO buffer memory: 128-byte transmit buffer and 128-byte receive buffer. The FIFO buffer memory can be adjusted in buffer size for starting data transmission/reception. You can optimize the buffer size for each application, for example by increasing the buffer size to reduce the CPU load or decreasing it to improve realtimeness.
|
|
|
|
Computer boards
