|
|
VMEbus
- Conforming with VITA 1-1994
- J1, J2 and J1/J2 backplane
- Manual or automatic daisy chain
VME64 Extension
- Conforming with VITA 1-1994 VME standards, VITA 1.1-1997 VME64 Extension standards, VITA 38 System Management for VME
- Termination, passive
- Electronic automatic daisy chain (EDC)
- Outstanding high-frequency noise suppression and very high MTBF due to ceramic capacitors
CompactPCI bus
- For durable industrial application
- CompactPCI is an adaptation of the Peripheral Component Interconnect (PCI) specification, version 2.1
- Power supply selectable with screw connections, ATX-PSU-connector, connector type M
- Clock signal less running times with optimum skew
ATCA Backplane
- Conformity with PICMG 3.0 ATCA Core Specification (ATCA= Advanced Telecom Computing Architecture)
- Full Mesh and Dual Star Topology
- 4 Ports per Link
- Slots for 2 redundancy Shelf Management Controller
- Connector for fan unit integrated
|
|
Kontron Embedded Modules is a founding member of the ETX® Industrial Group (ETX-IG) . ETX® and ETXexpress® are trademarks or registered trademarks of Kontron Embedded Modules GmbH.
ETXexpress® is the COM Express solution from Kontron. Check back here regularly for more updates.
|
|
ESM-GM965
Intel® GME965 Core™ 2 Duo ETXexpress Module
Features:
- Supports 65nm Intel® μFC-PGA 478 / μFC-BGA 479 Core™ 2 Duo CPU
- Intel® GME965 / ICH8-M Chipset
- One SODIMM up to 2 GB DDR2 SDRAM
- 2-CH LVDS, Dual View
- Broadcom BCM5787 Gigabit LAN
- 4 PCI, 5 PCIe x 1, 1 PCIe x 16
- 3 SATA II, 8 USB 2.0, 8-bit GPIO
- Power Requirement +12V / VCC5SB
- Power Type ATX
- Operating Temperature 0~60°C (32~140°F)
- Operating Humidity 0%~90% relative humidity, non-condensing
- Size (L x W) 5" x 3.7" (125 mm x 95 mm)
- Weight 0.44 lbs (0.2 kg)
|
|
Intel® 945GME Core™ Duo / Core™ 2 Duo / Celeron® M ETX Module
Features:
Supports 65nm Intel® ìFC-PGA 478 / ìFC-BGA 479 Core™ 2 Duo / Core™ Duo CPU
Intel® 945GME / ICH7-M Chipset
One 200-pin SODIMM up to 2 GB DDR2 SDRAM
Dual View, 2-CH LVDS
AC97 Audio
Realtek 8101E 10/100 Mbps LAN
2 SATA, 4 USB 2.0, 2 COM
4 PCI, 1 ISA Bus
|
|
ESM-910ETX
Intel® 910GMLE Celeron® M ETX Module
Features:
- Onboard Intel® ìFC-PGA 478 Celeron® M 600 MHz with 512K L2 Cache CPU
- Intel® 910GMLE / ICH6-M Chipset
- One 200-pin SODIMM up to 1 GB DDR2 SDRAM
- Dual View, 2-CH LVDS
- AC97 Audio
- Realtek 8101L 10/100 Mbps LAN
- 2 SATA, 4 USB 2.0, 2 COM, 4 PCI, ISA Bus
- Fanless Possible Operation
- Power Requirement +5V
- Power Type AT / ATX
- Operation Temperature 0~60°C (32~140°F)
- Operating Humidity 0%~90% relative humidity, non-condensing
- Size ( L x W ) 4.5" x 3.7" (114 mm x 95 mm)
- Weight 0.22 lbs (0.1 kg)
|
|
|
|
|
|
Computer on Modules (COM) address the need for standardized small form factor computing platforms. COMs are the perfect solution for long-term applications where technology and performance upgrades are a must. COMs are without connectors for USB, LAN, VGA, etc. and must be attached to an I/O board to fullfil an application's I/O requirements. Upgrades are easily managed through an exchange of the existing Computer Module to one based on the latest technology, in effect extending the lifecycle of the application
bCOM2-L1000 is a COM Express basic, Type 2 COM Express module featuring choice of Intel® processor with a wide range of processor options to deliver performance-per-watt improvements and meet low-power, high performance embedded applications requirements. With a SODIMM socket, the 2 GB of DDR2 memory can to be adjusted, on demand. One Gigabit Ethernet port is routed to the COM Express connector. It also supports transmissions of 10 and 100 Mbit/s. Additionally eight USB 2.0 ports are routed to the COM Express connector. The bCOM2-L1000 has four serial ATA Interfaces with RAID 0 and 1 support as well as an IDE interface for mass storage devices. Choose from the attached parallel hard disk drives or the new serial ATA drives. The SATA interfaces are ready for SATA II drives. For superior graphic performance, the bCOM2-L1000 features an integrated analog CRT and LVDS interfaces. I/O functionality is expandable with the PCI bus (up to 4 devices), five PCI Express x1 lanes and a wide PCI Express x16 port.
Supports up to 2x IDE devices
4x serial ATA interfaces
Multiple Intel® processor choices
Compliance to PICMG COM Express R1.0 basic form factor, Type 2
|
|
ETX®-CD with soldered Intel® Core™ 2 Duo Processor L7400 LV (1.5 GHz, 667 FSB, 4 MB L2) - A new dimension in embedded computing has arrived
Highest performance for Computer On Modules
With Intel® Core™ 2 Duo processor
ETX® 3.0 - Long Term Support
2x SerialATA for highspeed drives
|
|
|
Cambridge Technologys EC1000 is the next generation in galvo-steered laser control systems. This compact, fully integrated dual system-on-a-chip (SoC) control system is ideal for deployment into modern factory environments with distributed automation. In this environment, a single host computer can supervise a factory of networked laser marking appliances. The EC1000 is designed to be completely embedded into a scanning head and does not require a nearby physical host computer for operation. Remote Access, Remote Control, and Remote Monitoring are fully supported for tetherless operation in a distributed laser marking environment. Factory reliability and EMI immunity are ensured through the use of optically isolated digital control ports.
|
|
The new SLC-8550-LVA is the 5-inch bay sized (203mm×145mm) CPU board and is a lead-free and RoHS-compliant product. This CPU board supports the Intel 855GME + ICH4 chipset and is compatible with 1.6G-2.0GHz (FSB400MHz) Intel Pentium M processor and 1.3G-1.5GHz (FSB400MHz) Intel Celeron M processor. The main memory complies with PC2700 DDR SDRAM (supports both ECC and non-ECC memory) and is able to contain up to 1 GB.
The SLC-8550-LVA provides the expansion capability including six 232C serial communication ports (two of them are pin header connector), six USB 2.0 ports, CF slot (enables boot-up), AC97 audio and PCI slot, making it ideal for complicated embedded applications. LVDS interface and analog RGA enables the dual independent displays. CONTEC strives to customize contained devices and BIOS of the new SLC-8550-LVA as its custom ordered (OEM) product.
|
|
PICMG 1.0 CPU Board
PICMG 1.3 CPU Board
PCISA CPU Board
PICO/PICOe CPU Board
ISA CPU Board
5" 1/4 CPU Board
Embedded CPU Board
ETX CPU Board
ATX CPU Board
Mini ITX CPU Board
PIAGP CPU Board
|
|
MIP10 Family, PC/104-Plus CPU Boards for extreme environments!
* soldered Intel Pentium M and Celeron M CPUs
* soldered ECC RAM
* lockable headers
* including CF-Slot & Gigabit Ethernet
* comes with integrated conductive cooling concept
* extreme low power consumption
* extended Temperature from -40° to +75°C
* long term available (Embedded Program)
|
|
|
|
|
|
Product Name : Embedded Single Board Computer
Description :
3.5” Embedded Board for AMD Geode LX800 Low Power processor
With VGA/LAN/PC104/Audio/LVDS/CF/USB
Features :
★Support AMD Geode LX 800 0.9W processor, FSB 500MHz
★Bulit-in AMD Geode LX800 Chipset + Geode CS5536
★Realtek 8100C Chipset 10 / 100 Base-TX Ethernet
★Support 1 x 200 pin DDR SODIMM up to 1GB
★Realtek ALC202 Chipset, Support 5.1 Channel Audio
★Watchdog Software BIOS Setup
Specification :
★Processor: Support AMD Geode LX800 0.9W processor
★Chipset: AMD Geode LX800@0.9W chipset + AMD Geode CS5536 chipset
★Front Side Bus Speed: 500 MHz
★Memory: Support 1 x 200-pin SODIMM DDR400,up to 1GB
★VGA Interface: Improved Graphics
★LVDS Transmitter: 18-bit LVDS transmitter(optional)
support pixel rate up to 330M pixeis/sec
★USB Port: Support 2 x USB 2.0 ports
★Printer Port: Support 1 x SPP/EPP/ECP parallel port by pin-header
★Serial Port: Support 4 x COM ports, Winbond 83627 EHF COM1,
COM2 /RS232/485(optional), Fintek F81216D chipset COM3/4
★LAN Port: Realtek 8100C chipset 10/100M Fast Ethetnet
or Realtek 8100S chipset 10/100/1000 Gigabit Ethetnet(optional)
★Keyboard/Mouse: Support 1 x PS/2 Keyboard/Mouse
★Audio: Realtek ALC202 chipset support 5.1 channel audio
★Watchdog Timer: Watch Dog software BIOS setup
★Other Connector: Onboard 1 x PC/104 Plus
★Power: 12V AC to DC adapter or DC 12V input with P4 addition connector
★Dimensions(W x H): 146 x 101mm
★Operating Temperature: 0 to 60oC
★Relative Humidity: 10% to 90%(non-condensing)
|
|
Evaluation carrier board for ETXexpress® modules
Based on the COM Express™ standard from the PCI Industrial Computer Manufacturers Group (PICMG)
Evaluation Carrier Board
For express evaluation purposes
Includes all connectors for a quickstart
|
|
|
Computer-on-Module is a series of complete CPU modules that mount onto easily designed application-specific solution boards. Avalue offers COM Express CPU modules, ETX CPU modules and various baseboards to fit different demands. With the modular design, Avalue is able to provide customers 30-day Baseboard Prototyping Service for faster time to market.
|
|
Maxiflex Process Automation Controllers
The PAC is based on the Maxiflex P3 CPU platform. The Maxiflex Process Automation Controllers (PAC) run the IEC 61131 Control Applications and are available in a number of variants to suit network preferences.
Ethernet (with Modbus TCP)
Ethernet (Conet)
Modbus
Conet/c
Conet/m (Packet Radio Protocol)
This provides a flexible Network environment satisfying most networked applications and plant topologies. Process Control Applications invariably involve the following functionality for effective implementation.
Interlock Controls
Analogue Signal Processing
Control Algorithms - including PID with Auto-tune
Network Communications
Alarm and Events Monitoring
Date and Time Stamping at source for Sequence of Events monitoring
The ability to service Windows based SCADA systems
|
|
|
|
|
|
Processor modules MPE200 series
* CPU 400 / 650 / 700 MHz Pentium class
* SRAM: up to 512 Kb (battery backed)
* FRAM: 64 Kb (no battery necessary)
* DRAM: 64 or 128 MB
* FLASH: 8 MB internal
* 1x USB, 1x RS232, 1x RS232 / 422 / 485
* 2x Ethernet 10 / 100 Mbit/s
* Slots: PCC201 / xx, CF200 / xx, 2 PCI slots (M20 system)
Processor modules MPC200 series
* CPU 400 / 650 / 700 MHz Pentium class
* SRAM: up to 512 Kb (battery backed)
* FRAM: 64 Kb (no battery necessary)
* DRAM: 64 or 128 MB
* FLASH: 8 MB internal
* 1x USB, 1x RS232, 1x RS232/422/485
* 2x Ethernet 10 / 100 Mbit / s
* Slots: PCC201 / xx, CF200 / xx
Processor modules MX200 series
* CPU x86 66 MHz Pentium class / CPU 133 MHz Pentium class
* Integrated power supply 17 W / 24 V (MX213)
* NVRAM: 512 Kb
* DRAM: 256 MB
* FLASH: 16 MB internal
* 1x USB
* 1x RS232, 1x RS232 / 422 / 485 (MX213)
* 1x CAN
* Ethernet 10 / 100 Mbit / s
* Slots: PCC201 / xx, CF200 / xx (MX213)
Processor modules ME203 series
* Intel 80386 EX, 33 MHz
* Integrated power supply 17 W / 24 V
* SRAM: 512 Kb (battery backed)
* DRAM: 8 MB
* FLASH: 8 MB File Flash, 2 MB Boot Flash
* 1x RS232, 1x RS232 /422 / 485
* 1x Ethernet 10 / 100 Mbit /s or 1x CAN
* Slots: PCC201 / xx
|
|
One-stop shop in premium quality for Carrier Board & Full Custom Designs, Computer-on-Modules, Services and Value Adds
* Expertise in x86 and ARM technology with any desired CPU
* Consultancy, specification support and concept optimisation
* Component selection and purchase to further the success of your product
* Design and Production to ensure best quality carrier boards
* And more...
|
|
AUTOMELEC obtained the means of production making it possible to propose with its customers a complete pallet of services for the assembly of electronic charts.
AUTOMELEC carries out the manufacture of charts made up of crossing components (traditional wiring) and/or of components assembled on the surface (CMS).
These services can go from the provisioning of the components until the realization of the tests, while passing by the setting out of case or box with the realization of wiring and the wiredrawing mill.
|
|
* Customer developments and manufacturing since 1985
* Use of state-of-the-art technologies around microprocessors, CPU, DSP ...
* Experts in low power and extended temperature designs
* HW and SW designs, and product support
* Solutions are used in Intrinsic safe applications, medicine, transportation, defense as well as the industry and aerospace
|
|
More than 23 years experience.
Products designed, manufactured and repaired by Cybersys.
High reliability and insulation, tested in industrial environment.
Two-year guarantee.
The products can be customized to your needs.
Environment
Operating : + 5 à + 55 °C,
Storage : - 25 à + 70 °C,
Humidity : 5 à 95 % without condensation.
Applications
- Interface adaptation,
- Interface insulation,
- Interface transfer,
- Multipoint networks.
|
|
VM-1 Application Boards
In use, a VM-1 controller is normally plugged into another board. The VM-1 provides the CPU functions and the raw logic-level I/O signals; the 'application board' provides interfaces to the system to be controlled.
Often our customers will design their own VM-1 application boards, or have us do it for them. As these are mostly very simple circuits, the investment in design and production facilities is relatively low.
However it may not make sense for you to have your own custom application board if you are just prototyping a project, or have a small production run. That's why we've developed a range of Standard Application Boards for you.
|
|
As a technology service provider, RAFI Eltec develops and produces electronic assemblies and systems according to customer requirements, from the idea to the finished product.
Within the RAFI Group, RAFI Eltec is the flexible EMS service provider for complex assemblies, sophisticated technologies, qualified prototype production and for reliable implementation of medium-sized piece numbers.
- Complete service from one supplier
- Assembly development according to specifications
- Complete material procurement
- Prototype set-up on serial production plants
- Assembly production (chip on board, chip on chip, flip chip, globe top...)
- Production and maintenance of test equipment with own test set-up
- Test of assemblies
- Final assembly
- Logistics
|
|
ADDI-DATA offers a large range of interference-free PC boards for the industrial measurement, control and automation:
- Digital I/O, 24 V
- Analog I/O, multifunction boards
- Counter boards: incremental counter, SSI synchronous serial
interface, counter/timer, pulse acquisition, frequency , pulse width , period duration, velocity measurement, PWM, BiSS-Master, digital inputs and outputs, ...
- Serial interfaces
- Motion control boards
Protective measures:
- Optical isolation from 500 V to 1000 V
- Separation between analog and digital signals
- Protection against short-circuits, overtemperature and overvoltage
- Input and output filters
- Industry-standard SUB-D connectors
Free drivers for standard operating systems and programming samples.
|
|
|
|
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 500 kS/s on 8 channels
* Extremely high dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The M2i.47xx series allows recording of one, two, four, eight or sixteen channels with sampling rates of 100 kS/s up to 500 kS/s. These cards offer outstanding A/D features both in resolution and speed for PCI/PCI-X. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 2 GSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 16 channels with 500 kS/s sustained to memory or hard disk.
|
|
|
|
|
|
* 12 bit transient recorder
* 4 synchronous channels with seperate A/D
* Maximum sampling rate 25 MS/s on 4 channels
* Simultanous sampling on all channels
* Up to 64 MSample memory
* 8 input ranges between ±50 mV and ±10 V
* FIFO mode up to 50 MS/s sum samplerate
* Input offset up to ±100%
* Automatic offset calibration
* Synchronisation to multi-board system possible
* 32 Bit PXI / CompactPCI 3U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MX.31xx series allows recording of two or four channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PXI bus could be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 64 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 3 MS/s on 8 channels
* Extremely high dynamic range
* Up to 256 MSample memory
* 8 input ranges between ±50 mV and ±10 V
* Continuous FIFO mode
* Automatic offset calibration
* Selectable single-ended or differential inputs
* Synchronisation to multi-board system possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.46xx series allows recording of two, four or eight channels with sampling rates of 200 kS/s up to 3 MS/s. These cards offer outstanding A/D features both in resolution and spees for CompactPCI. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 256 MSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 8 channels with 3 MS/s sustained to memory or hard disk.
|
|
|
|
|
|
* 12 bit transient recorder
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 25 MS/s on 8 channels
* Simultanous sampling on all channels
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Input offset up to ±100%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The M2I.31xx series allows recording of two, four or eight channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PCI bus could be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution.
As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 2 GSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred on-line to the PC memory or to hard disk.
|
|
* 16 bit A/D converter board
* 8 synchronous channels with seperate A/D
* Maximum sampling rate 1 MS/s on 8 channels
* Extremely high dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 8 input ranges between ±50 mV and ±10 V
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* ABA mode available as an option
The M2i.46xx series allows recording of two, four or eight channels with sampling rates of 200 kS/s up to 3 MS/s. These cards offer outstanding A/D features both in resolution and spees for PCI/PCI-X. They are available in several versions and different speed grades making it possible for the user to find an individual solution. The installed memory of up to 2 GSample can be used for fast data recording or sustained data streaming. The enhanced FIFO engine is capable of streaming even 8 channels with 3 MS/s sustained to memory or hard disk.
|
|
DT300 Series boards deliver high-quality, low-cost PCI data acquisition with the flexibility of six different versions to match your needs. Each board contains 16SE/8DI analog inputs, 23 digital I/O lines, and four counter/timers. Options include 12- and 16-bit analog inputs and analog outputs.
Key Features:
* High-speed dynamic digital inputs can time stamp your digital input in relation to A/D
* Flexible triggering and clocking capabilities
* 1024-location channel-gain list allows flexible channel selection in any sequence desired
|
|
CAMAC, an acronym for Computer Automated Measurement And Control, is an IEEE-standard (583), modular, high-performance, real-time data acquisition and control system concept. Born in 1969, CAMAC now appears in many thousands of scientific, industrial, aerospace, and defense test systems in more than 40 countries.
CAMAC is a non-proprietary, open-architecture concept providing:
* high-speed data throughput
* a wide variety of I/O interface modules
* distributed intelligence
* computer independence (see our most recent innovation: The Grand Interconnect System
* large I/O point capacity
The modular concept permits computer interaction with virtually any type of sensor, transducer, or final control element. Also available is a standardized Serial Highway that operates at transmission rates to 50 Mbit/sover distances to 3 kilometers between remote locations.
|
|
|
|
Computer boards
