|
|
|
The P635 is a single-width, 3U, PXI bus module with eight frequency measurement channels. This counter module can be used to monitor a variety of pulse sources. Moreover, its unique circuitry allows the monitoring of a wide range of frequencies without changing any module settings. TTL inputs are provided as well as differential input circuits, with filtering and hysteresis to provide high noise immunity. The switching threshold is programmable. The input voltage should be at least twice the threshold voltage for noise immunity. AC or DC coupling of the differential inputs is programmable on a per-channel basis.
|
|
|
|
|
|
The V200 is a single-width, C-size, register-based, VXIbus module that provides 16 or 32-channels of 16-bit resolution analog-to-digital conversion at sample rates up to 200 ksamples/s per channel. The sigma-delta architecture provides inherent filtering and synchronous sampling without the need for sample/hold amplifiers or sophisticated analog filters. A simple, 3-pole pre-filter assures no frequency aliasing. The module is divided into two channel groups, allowing one half of the channels to be operated at one clock rate, while the other half are operated at another clock rate. The groups can also be combined, operating the entire module at one clock rate.
Each channel has independently programmable input spans from +/-10 mV to +/-10 V provided by an Instrumentation amplifier front end. AC/DC coupling can also be programmed on a channel-by-channel basis. Channel calibration and self-test are performed automatically on command by the embedded DSPs. These DSPs also allow programmable level and slope limit checking.
|
|
The P210 can simultaneously sample 4 analog input channels with differential input configurations to achieve maximum noise immunity. It also provides 2-CH 12-bit analog outputs with waveform generation capabilities, which can be performed together with analog input functions. If more analog input or output channels are required, multiple modules can be synchronized through the PXI trigger bus.
The P210 card also features analog and digital triggering, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters. The auto-calibration feature adjusts the gain and offset to a specified accuracy, eliminating the need to calibrate the modules by adjusting trimpots.
|
|
Accurate conversion of physical parameters, such as temperature, pressure, and strain, into digital data is a challenging task.
VXI Technology combines superior accuracy, high-density, and modularity specifically targeting these applications.
Essential features such as integrated signal conditioning, internal self-calibration, open signal path detection, and flexible open standard programming interfaces are standard.
|
|
PCI/ISA/PCMCIA Accessories
- Channel Expansion
Model EXP-16 16-Ch Mux and Signal Conditioning Board (for Models DAS-8/16/800/1200/1400/1600)
Model S1600 Shielded Cable w/ 37-Pin Connectors, 0.5m (1.5ft) (for Models DAS-16, DAS-1600/1400/1200, EXP-16, EXP-16/A, EXP-GP)
- DIN Rail Mounting
Model STP-50/C Screw Terminal Panel w/ 50-Pin Male Header and Case (for Models DAS-20/1700/1800/HRES, KPCI-PIO96, PIO-96J, PIO-SSR)
- ISA Bus Expansion Chassis
- MB-Series Signal Conditioning
- Plug-In Board Cables
- Screw Terminal Boards
|
|
PC/104 8-Ch. A/D, 4-Ch. D/A, 12-Bit Multifunction Board
Eight differential or single-ended A/D inputs
12-Bit resolution
100K samples per second
Four analog outputs
And more...
|
|
|
PXI is the open, PC-based platform for test, measurement, and control. PXI provides the industry's highest bandwidth and lowest latency with modular I/O for high-resolution DC to 6 GHz RF. With more than 1,200 products from more than 70 vendors, PXI is the platform of choice for thousands of companies worldwide.
|
|
Data acquisition products from PXI to multifunction USB data acquisition boards to PCI Analog & Digital I/O boards
The KPCI-1801HC/1802HC multifunction data acquisition boards combine high performance with high channel capacity. They make it simple to gather analog data, read and output digital signals, provide analog stimulus, and much more. Both boards provide 32 differential or 64 single-ended inputs and two analog outputs. The KPCI-1801HC offers software programmable high-gain inputs of 1, 5, 50, and 250, while the KPCI-1802HC features low gain inputs of 1, 2, 4, and 8.
|
|
Wide range of switch options: RF/microwave, matrix, solid-state, relay, low current, high-frequency, high voltage and more.
Model 7001 80 Ch - 2 Slot Half Rack Switch MainframePart Number: 7001
The Model 7001 is a half-rack, high density, two-slot mainframe that supports the widest range of signals in the test and measurement industry. DC switching capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and optical switch support, make the Model 7001 a versatile production test tool for a wide array of applications.
|
|
PCI Express x4 Frame Grabber For High Bandwidth Camera Link Cameras
The PIXCI® E4 is a plug-n-play frame grabber. Load the software, connect the camera, and begin to capture images. In addition to supporting high bandwidth cameras, the PIXCI E4 supports more than 100 Full, Medium, and Base configuration Camera Link cameras with lower bandwidth requirements.
High Bandwidth Camera Link Frame Grabber
PCI Express x4 Bus
1 Gbyte/sec Burst Transfer
Up to 700 Mbyte/sec Sustained Data Transfer
Line Scan or Area Scan
Camera Frame Rate Sequence Capture
Triggered Image Sequence Capture
64-Bit Memory Addressing
Camera Integration & Async Reset Control
Integration From Microseconds to Minutes
Images Stored in Motherboard Memory or RAID Array
Compatible with 32 / 64-bit Windows & Linux
RoHS Compliant
|
|
|
The mvHYPERION-CLe is a frame grabber for the next generation bus system PCI Express®. Due to PCI Express® the mvHYPERION-CLe offers a maximum capture bandwidth of 250 MB/s. In addition to that, depending on the model up to two control connectors allow the parallel operation of two independent cameras with BASE interface on one single mvHYPERION-CLe.
|
|
|
|
|
|
4-channel H.264 Audio/Video capture card, supports Power over Ethernet
Features
* H.264 AVC Main Profile CODEC
* LPCM and MPEG-2 Advanced Audio Coding
* Supports NTSC and PAL signal inputs
* Pre/post alarm buffer for event recording
* Instant search with preview windows
* Optional Power Over Ethernet (PoE IEEE802.3af)
Supports TCP/IP, UDP, HTTP, PPPoE, RTP, RTSP, FTP, NTP, POE protocols
10/100BaseT fast Ethernet WAN port x1(RJ-45)
Video Connections
Input: 4 x BNC connector, CVBS 1.0Vp-p
Output: 1 x BNC connector, CVBS 1.0Vp-p
H.264 Video
H.264/AVC codec
Up to 4 analog video inputs
Motion detection, percentage and sensitivity
CIF up to Full D1 resolution at 30/25 FPS for NTSC/PAL
720x480 NTSC, 720x576 PAL
NTSC: 30FPS / PAL : 25FPS
Audio
Unbalanced, RCA connector audio in
Unbalanced, RCA connector audio out
LPCM and MPEG-2 Advanced Audio Coding (AAC)
LED Indicator
Power x1
Network status x1
Security
Administrator and user group
Password authentication
Alarm Feature
2 TTL, terminal block
2 Relay output
RS-485 Half duplex, terminal block
PTZ
Supports PTZ protocols: Pelco-P_type1, Pelco-
P_type2, Pelco-D
Load Default
1 button for factory default parameter setting
Power
4.5W
DC12V in
POE supported
Client Software
Microsoft Windows 2000/XP
Networking, Video, audio and data rate, Display window scale, Motion detection setting
Real time clock setting, File saving, Remote configuration and control, Snapshot
Pre/post alarm buffer for event recording, Instant search with preview windows, Fast/slow forward replay and pause, Hard disk quota warning, File format: MPEG4 (MPG4)
http://www.lannerinc.com
|
|
PXD Frame Grabber Family
The Imagenation PXD digital frame grabber offers data rates high enough for the most demanding video capture applications. Compatible with single, dual or four channel cameras, the PXD comes with a camera configuration application that makes it one of the easiest machine vision components to set up and use.
Specifications:
- Input signal RS422 (up to 30 MHz per channel); EIA-644 (LVDS) (up to 40 MHz per channel)
- Camera output Single channel: up to 32 bits/pixel and pixel rates to 40M pixels/sec for EIA-644 (LVDS) signals; Dual channel: up to 16 bits/pixel and up to 80M pixel/sec rates; Four channel camera at 8 bits/pixel and up to 160M pixels/sec rates
- Camera connector Single connector has 100 pins
- Camera power + 12V out at 800 mA and + 5V at 800 mA, available on user connector and camera connector
- Supported Operating systems Win 98, ME, NT, 2000, XP
- Supported Languages C / C++, C#, Visual Basic and Visual Basic .NET
|
|
|
DALSA's digital frame grabbers support both monochrome and color applications with common interface standards including Camera Link®, LVDS and the new GigE Vision. In addition to supporting conventional Peripheral Component Interfaces (PCI and PCI-Xpress) DALSA image acquisition boards support 3rd generation PCI-Express interconnects.
|
|
The PIXCI D3X is a PCI-compatible imaging board supporting camera configurations with 3 to 8 data channels, or with 30 to 64 total data bits - cameras that are beyond the interfacing capacity of the PIXCI D2X.
ONE PIXCI D3X BOARD ON ONE BUS - interfaces to a maximum of 32 bits or 4 data channels to a maximum sustained data transfer rate of 100 MB/sec
Features:
Single or Dual Board Configurations
Line Scan or Area Scan
Three To Eight Data Channels
30 to 64 Bit Camera Data
Asynchronous Capture Control
Differential Trigger In / Strobe Out
Camera Integration and Reset Control
32 bit PCI Bus Master
132 MB/s Burst Transfers
Compatible with 32-Bit and 64-Bit PCI Buses
Video Rate Image Sequence Transfer to Motherboard Memory
|
|
|
The mvDELTA frame grabber for the PCI-bus and PCI Express®-bus is the most compact and cost-effective MATRIX VISION product solution to date. Nonetheless, the quality and functionality of this board make it an ideal solution for a variety of visualization and image processing tasks. The cross-product software port facilitates quick transition to higher-performance frame grabbers from MATRIX VISION for applications that are more demanding on the board's specification.
|
|
|
|
|
|
Model DVC-3132
4-Channel Video in/Audio in MPEG-4 Hardware CODEC Video Capture Card
DVC-3132 os a video capture card gargeting at high end security and surveilliance market. It uses MPEG4 hardware CODEC chipset to enable video encoding and decoding.It supports commpression mode from MPEG 1/2/4,H.263 and MJPEG. No matter recording or playback, DVC-3132 allows for real-time displaying of each channel, 360 x 240 4 channels total 120 fps.Its superior performance also manifested in its high resolution of 720 x 480 (576PAL) full D1 quality.
Model DVC-3111
4/8/16 Channel Digital Video Capture Card
Up to 16 channel video input
Cost effective video capture card
Supports multiple resolutions of 640 x 480, 640 x 240, 320 x 240, and 320 x 120
With Low profile bracket, has dimension of 170 x 55 mm to fit into 2U vertically
Provides customer with a unique encryption code to protect their software IP copyright using CPLD
Hardware Watchdog Timer
Model DVC-5215
8-Channel PCI-Express Digital Video Capture Card
PCI Express x 1 Interface
8 video and 8 audio in
Up to 8 channel in real-time
Spectacular cooling design
Supports multiple resolutions of 640 x 480,640 x 240, 320 x 240, and 320 x 120
Provides customer with a unique encryption code to protect their software IP copyright using CPLD
|
|
This product is an interface board for PCI Express bus conformity which perform bidirectional input and output of a LVTTL level digital singnal. Input and output of 48 points at the maximum is possible with one piece. Choice is possible by applications software for the input or the output at a unit of eight points. By an attached driver library[API-PAC(W32)], it can make applications software for Windows in various programming languages that support Win32API functions such as Visual Basic or Visual C++.
|
|
Kontron provides a large array of PCI and ISA industrial I/O boards for data acquisition, control and monitoring for industrial automation, military, medical, security, test and general R/D
|
|
* Universal digital I/O
* 16 bit data width at 125 MS/s
* 110 Ohm termination software selectable
* 3,3V and 5V TTL tolerant I/O lines
* Up to 128 MByte on-board memory
* continuous FIFO transfer possible
* Pattern edge pulsewidth trigger
* internal synchronisation with analog cards possible
* 32 Bit PXI / CompactPCI 3U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MX.70xx series of fast digital I/O boards offer a resolution between 16 bit and 32 bit with a maximum sampling rate of 125 MS/s (60 MS/s). The on-board memory of up to 128 MByte could be completely used for recording or replaying digital data. Alternatively the MX.70xx could be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several MX.xxxx boards. Therefore the MX.70xx board could be used as an enlargement to analogue boards.
|
|
|
|
|
|
* Universal digital I/O
* 32 bit data width at 125 MS/s
* configured for input and output
* 110 Ohm termination software selectable
* 3,3V and 5V TTL tolerant I/O lines
* Up to 512 MByte on-board memory
* continuous FIFO transfer possible
* Pattern edge pulsewidth trigger
* internal synchronisation with analog cards possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be completely used for recording or replaying digital data. Alternatively the MC.70xx could be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several MC.xxxx boards. Therefore the MC.70xx board could be used as an enlargement to analogue boards.
|
|
|
|
|
|
* Universal digital I/O
* 32 bit data width at 125 MS/s
* configured for input and output
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* 110 Ohm input impedance selectable
* Inputs 3.3 V and 5 V TTL compatible
* Outputs 3.3 V TTL compatible
* Up to 4 GByte on-board memory
* FIFO mode for input and output
* Pattern/edge/pulse width/delay trigger
* Synchronization option available for up to 16 cards
* Options: ABA mode, Multiple Recording/Replay, Gated Sampling/Replay, BaseXIO
The M2i.70xx series of fast digital I/O boards offer a resolution between 1 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). All I/O lines of the card can be programmed for either input or output direction. The on-board memory of up to 4 GByte can be used completely for recording or replaying digital data. Alternatively the M2i.70xx can be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several M2i series cards. Therefore the M2i.70xx board can be used as an enlargement to analog boards.
|
|
Product specification:
- #32 digital opto-coupled inputs;
- 8 channels are interrupting channels
- Positive logic, 24VDC, PLC compatible
- Input status led provided
- External connectors provided
|
|
Board-only configurations that allow you to easily embed intelligence into small spaces and custom enclosures.
|
|
Description
The GX3500 is a user configurable FPGA 3U PXI card which offers 160 digital I/O signals for specific application needs. The card employs the Altera Cyclone III FPGA which can support clock rates up to 150 MHz and features over 55,000 logic elements and 2.34 Mb of memory. The GX3500 can also accept an expansion card assembly which can be used to customize the interface to the UUT – eliminating the need for additional external boards which are cumbersome and physically difficult to integrate into a test system. The design of the FPGA is done by using Altera’s free Quartus II Web Edition tool set. Once the user has compiled the FPGA design, the image can be loaded into the FPGA via the PXI bus interface or via an on-board EEROM.
|
|
104-DIO48
PC/104 48 Digital I/O, Two 50-Pin IDC with High Sink Current
48 channels of digital I/O
E2 extended temperature option available
Compatible with PB module racks
High sink/source current (64mA/32mA)
|
|
SMART designs and manufactures high-quality, cost effective custom and standard displays and controller boards. Through a winning combination of worldwide logistical capabilities, wide-reaching technical support, and renowned technical expertise, SMART offers unique advantages to OEMs developing products for Kiosk, Digital Signage, ATM, Gaming, Embedded Display, and Embedded Controller applications.
Principally focused on providing unparalleled customer service and high-quality products, SMART is solidly positioned to service OEM standard and custom display and controller board needs. By capitalizing on a tradition of longstanding partnerships with key suppliers and customers as well as a broad global manufacturing footprint, SMART can reliably provide OEMs with high-quality solutions that fit their budget.
|
|
|
|
|
|
Embedded Boards
Eurotech design and manufacture a comprehensive range of industry standard x86 and XScale / RISC based PC/104, EPIC and EBX format embedded single board computers, PC/104 I/O modules and PCI-bus add-on I/O boards.
x86
Eurotech offer a comprehensive range of industry standard x86 PC/104, 5.25" and EBX format single board computers. These are supported by a wide selection of Development Kits for the leading embedded operating systems. The functionality of the processor boards can be expanded using PC/104 and/or PCI I/O and comms modules...
XScale
Eurotech offer a comprehensive range of industry standard XScale / RISC based PC/104 and EPIC format single board computers. These are supported by a wide selection of Development Kits for the leading embedded operating systems. The functionality of the processor boards can be expanded using PC/104 and/or PCI I/O and comms modules...
PC/104 Expansion
Our PC/104 I/O and Communication boards cover a range of interface requirements from simple bitmapped GPIO to multi-function isolated devices. A variety of industry standard bus formats mean that I/O expansion is available for all of our processors, embedded appliance and industrial PC products, as well as being compatible with third party products...
PCI-bus Expansion
Our range of PCI expansion boards are specifically designed for industrial control applications. These may be used in our 19" rack mounted industrial PCs. Based on PCI 2.1 specification, the PCI boards fully support plug and play configuration, and provide fast throughput for I/O intensive peripheral devices...
|
|
|
microETXexpress is a module concept like of the new ETXexpress® modules. microETXexpress is plug-compatible to the ETXexpress® products and to the COM Express™ standard (by PICMG). microETXexpress are 95 x 95 mm and therefore differ with regards to the mounting of the boards. The available PCI Express lanes depends on the board design.
|
|
3.5" Embedded single board computers for industrial and commercial applications.
Lanner produces feature-rich, general purpose motherboards to be used in a variety of applications where space is a premium. We provide you with what you need to create the perfect solution for any given situation.
Lanner offers 3.5" SBCs built on Intel Atom, Intel Celeron, Intel Core 2, VIA and AMD processors.
http://www.lannerinc.com
|
|
|
|
Computer boards
