|
|
| Products 91 to 120 of 341 |
3.5" Intel® 945GME Core™ Duo / Core™ 2 Duo / Celeron® M Micro Module
Features:
Supports Intel® Core™ Duo / Core™ 2 Duo / Celeron® M CPU
Intel® 945GME Chipset
One SODIMM up to 2 GB DDR2 SDRAM
2-CH LVDS, Dual View, HDTV
5.1-CH / 7.1-CH Audio with S/PDIF
Dual Realtek RTL 8111B GigaLAN
1 Mini PCI, 1 Type I/II CF
2 SATA, 2 COM, 4 USB 2.0, 8-bit GPIO
Jumperless Serial Port Configuration
ACPI S3 / S4 Supported
|
|
3.5” Intel® 910GMLE Celeron® M Micro Module
Features:
Onboard Intel® Celeron® M CPU
Intel® 910GMLE / ICH6-M Chipset
One 200-pin SODIMM up to 1 GB DDR2 SDRAM
Dual View, Dual LVDS
2-CH Audio
Dual Atheros AR8121 GigaLAN
1 EIDE, 2 SATA, 1 Type I/II CF, 1 Mini PCI
8 USB 2.0, 16-bit GPIO
|
|
|
The nanoETXexpress specification, a form factor driven by Kontron, is targeted to deliver extremely power-saving COMs with mid to high performance x86 technology on a footprint that is a mere 55 mm x 84 mm. This is 39 percent of the original COM Express™ module Basic form factor 125 x 95 mm footprint and 51 percent of microETXexpress (95mm x 95mm). This new COM form factor is compliant to COM Express™ module size nano from PICMG and is based on COM.0 Type 1 connector. The locations of the identically mapped pin-outs are also 100 percent COM.0 compliant.
|
|
* CPU modules in PC/104 form factor and other sizes
* Embedded solutions with x86, Power PC and ARM9 CPUs
* Extended temperature solutions
* Embedded designs for reliable and rugged industrial use
* Low power consumption starting at 2 watt
* Total solutions with housings (up to IP 67)
* High flexibility, depopulation for cost optimization
|
|
|
|
|
|
Nexcom has expanded its range of Industrial Computer Solutions with the launch of several new embedded boards and systems which are based on the energy-efficient Intel® Atom™ CPU. For years, Embedded Systems designers have been waiting for a low-power Intel architecture CPU that provides sufficient performance capability for a broad spectrum of applications to be addressed. The new Intel® Atom™ processor fulfils this key role and enables many new embedded and mobile power-efficient applications to be considered.
Nexcom has utilized Intel® Atom™ based technology in a number of its new Embedded Computing Platforms including the ICES 170 ETX Module, the ICES 270 Com-Express Module and EBC 540 5.25” Embedded CPU Board. In addition, the robust NISE 2000 range of Fan-less Computer Systems has also been launched for applications that require a complete system based solution.
All platforms are based on the energy-efficient, yet surprisingly cost-effective Intel® Atom™ N270 1.6GHz processor and offer industrial-grade computing at a commercially acceptable cost. In addition, the N270 CPU is included on Intel’s Embedded Roadmap and therefore has an extended life-time support. The development of these rugged Intel® Atom™ based platforms underlines Nexcom’s commitment to develop new industrial computing solutions for vertical markets such as Control and Automation, Digital Signage, Retail, POS, Infotainment and Gaming.
|
|
Embedded Processors
Embedded processors provide solutions for real-time systems for mass storage, automotive body and power-train, industrial and networking applications.
|
|
Avalue’s XTX-US15WP is the pioneer of XTX module incorporated with eMenlow platform in the market. The XTX is an extension of ETX form factor. The x2 connector on XTX has advanced functions such as PCIe, SATA, LPC Interface, digital audio and USB. The XTX-US15WP has two LVDS signals for dual display, and a Micro-SD slot on the module for more flexible expansion.
Features:
Intel® Atom™ Z510P / Z530P CPU
Intel® US15WP Chipset
Dual View, Dual LVDS
2 SATA, 6 USB, 1 Micro-SD Slot, 4 COM
1 PCIe x1
Fanless Operation
114mm(L) x 95mm(W)
|
|
DIMM-PC®/520-I with AMD® Elan™ SC520 (133 MHz) CPU with 32MByte DRAM, 32MByte IDE compatible Flash Disk
AMD® Elan™ SC520 CPU with 133MHz
16/32 Mbyte DRAM and 16/32 MB IDE Flashdisk on board
Two serial ports (TTL)
IDE Interface
|
|
Time to market is everything!
You know what your customers want, and how your device has to perform to meet their requirements. The last thing you need is to have to become an expert in embedded electronic devices.
That’s why we offer our industry leading range of Development Kits. They take a field proven Eurotech processor board and combine it with a pre-ported, ready-to-run embedded operating system image. Add in development tools, drivers for all on board devices, sample code, comprehensive documentation and full technical support and you end up with an unbeatable proposition that gets you developing your application fast!
Linux variants include full source code, allowing you to customise the image calling upon the huge open source Linux code base to provide extremely rapid development turnaround times.
|
|
JRex 3.5" SBC
Embedded SBCs - in 3.5" (JRex). Serving as the best scaleable off-the-shelf-board solution - with up to Pentium® M performance. Offering patented JFLEX™ IO, PC/104 and PCI/104-only expansions.
JRex boards are a family that allows full accessory reuse - as all interfaces remain unchanged electronically and mechanically.
Easiest up/downgrade at minimum risc - from VIA Eden® to Pentium® M and back again.
|
|
Mini-ITX Motherboards
Mini-ITX is the new compact standard motherboard form factor which is mechanically compatible with ATX motherboards. Kontron offers Embedded Mini-ITX motherboards with long life and many industrial features.
|
|
|
|
|
|
Micro-ATX single board computer with LGA775 socket supporting Core 2 Duo CPU, SATA II, GbE LAN, USB, PCI-E and CompactFlash socket
Features
* Supports Intel Conroe Core 2 Duo LGA775 CPUs, FSB 533/800/1066MHz
* Intel Q965 + ICH8R Chipset
* Four DIMMs up to 8 GB Dual Channel DDR2 533/667/800 MHz SDRAM
* Intel GMA 3000 2D/3D graphics accelerator
* Dual gigabit LAN with PXE support
* 1 PCI-E X16, 1 PCI-E X1, 2 PCI
* 4 COM, 6 USB 2.0, 4 SATA 300/150, CF
Form Factor
Micro-ATX
Platform
Supports Intel Conroe Core 2 Duo with VT, Pentium D 900 sequence, Pentium 4 with HT, FSB 533/667/800 MHz, LGA775
Intel Q965 +ICH8R chipset
AMI Flash BIOS
Processor Built-in Cache Memory
System Memory
DDR2 533/667/800 MHz SDRAM
8GB Max Capacity
240-pin DIMM x4
Storage Interface
IDE x1, Serial ATA II x4
CompactFlash I/II x1
Networking
10/100/1000 Mbps
RJ45 x2
Display
Intel(R) GMA 3000 2D/3D graphics media accelerator
Supports up to 224MB Video Memory
Audio
Realtek ALC260/262 HD audio codec, NS LM4950 amplifier
Mic-in, Line-in, Line-out
I/O Interface
FDD Header x 1
RS-232 x3, RS-232/422/485 x1 (all serial headers+5/12V support)
1 Parallel Port
6 USB(v2.0)
8 x TTL input , 8 x TTL output
PS/2
PS/2
Cooling
Heatsink & Fan
Expansion
PCI Express (x16) x 1, PCI Express (x1) x 1, PCI x 2, Mini-PCI slot x 1
Environmental Parameters
0~60°C ambient operating temp.
neg 20~70°C ambient storage temp.
0~90% ambient operating humidity
Physical Dimensions
243.84 mm x 243.84 mm (9.6” x 9.6”)
Power
DC +3.3V/+5V/+12V/+5Vsb
ATX support
Compliance
CE, RoHS
|
|
Structured around a processor, heart 32bits x86 at
133 MHz of ZF Micro devices and STM.
Dedicated to the industrial or military embeded applications.
Personnalisable according to the application.
Especially conceived to answer the constraints of an environment severe (temperature, vibrations, shocks and CEM).
|
|
Motherboards & Stackables
Many applications, such as those in protected environments, do not require the full feature set of a CompactPCI® or VME system to meet their needs. Such applications are better served with embedded motherboards or stackable solutions. Our portfolio offers a range of different form factors and performance levels under an umbrella of extended lifecycle and configuration control services.
|
|
Processor: Onboard Intel Atom N270 (1.6GHz frequency, L2 cache 512KB,533MHz FSB)
Chipset: Intel® 945GSE+ICH7M
Memory: 1x 200-pin SO-DIMM, DDRII 400/533 MHz up to 2GB
Display: GMA950 Dynamic share 224MB system memory for graphic memory
Up to 2048x1536x32 bpp@85 Hz for CRT
Up to 1600×1200×32bpp@60 Hz for LVDS
1x DB15, 1x DVI, 18-bit single/dual channel LVDS
VGA + LVDS can achieve dual independent display
Ethernet: REALTEK 8111C,10/100/1000Mbps,4x RJ-45
Audio: N/A
I/O Interface: 1x RS-232, 1x RS-232/422/485, ESD protection
1xPC104+
4x USB2.0, 1x Mini-IDE(UDMA 100), 1x IrDA, 1x LPT
1 x PS/2, , 2×SATA II, 1 x typeⅡ Compact Flash
Watchdog Timer: Generates a time-out system reset
Power Supply: Single Power(+12V)
Dimensions: 165mm×115mm（L×W）
Operating Temperature/Humidity: 0℃～60℃/0%～90%, Non-condensing
|
|
Size ATX form factor, 30.5cm x 22.0cm
Chipset NorthBridge: Intel® 945G Express + Intel® ICH7
ITE IT8712F +Fintek F81216D I/O chip
RTL8111C GbE Chip
Realtek ALC888/655 co-lay Audio Decoder(codec)
Processor Socket: LGA775, FSB: 1066/800/533MHz
Intel® Pentium® D, Intel® Pentium® 4, Intel® Core 2 Duo
Built-in IO 4 x Serial ATA II 3.0Gb/s, 1 x UDMA ATA 100/66/33, 1xCF socket
3 x 2x20 pin box (support 12x COM)
1 x RS232/485/422(adjustable)
2 x USB 2.0/1.1 ( support 4x USB)
1 x GPIO(12GPI，12GPO)
1 x IrDA, 1 x LPC
I/O on rear panel
4 x USB 2.0/1.1
2 x RJ45
3 x Audio (1 x output/ 1 x input/ 1 x Microphone)
1 x RS232, 1 x LPT, 1 x VGA
Expansion 1 PCI Express x 16, 2 PCI Express x 1
3 PCI, 1 ISA
RAM 4 DDR II DIMM RAM support upto 4GB RAM
Support dual channel DDR II 667/533/400 DIMM RAM
|
|
Processor: Support Intel® Mobile processor with socket M Core 2 Duo, Celeron M processor
Chipset: Intel® GM945 + ICH7M
Memory: 2 x DDR2 DIMM 667/800, up to 4GB
Display: Intel® GMA 950, share system memory up to 256m
1 x VGA, 1 x DVI-D, 1 x LVDS, 1 x TV-OUT
Ethernet: Realtek RTL8111B Gigabit Ethernet Controller, 1 x RJ-45 connector
Audio: Realtek ALC882 HD Audio Chip
I/O Interface: 1 x IDE, 6 x USB 2.0, 2 x RS-232, 2 x SATA, 1 x PCI, 1 x Mini-PCIE
Watchdog Timer: programmable 256 levels
Hardware monitor: Fan speed, temperature, voltage
Dimensions: 170mm×170mm
Operating Temperature: 0℃～60℃
Operating Humidity: 5%～95%, non-condensing
Power Supply ATX-24 Pin
|
|
Embedded Motherboards
Kontron motherboards are the ideal solution for embedded applications. As the options for embedded computing continue to expand, identifying the right choice becomes more complicated and can be very confusing. In applications where longevity and risk avoidance must be optimized, Kontron's experience in a variety of markets can lead customers to the solution that meets their needs and meets critical programming and cost objectives.
|
|
The Wildcat gives OEM designers optional Ethernet connectivity in a low-cost, high-performance single-board computer. These compact boards are rich with the digital I/O, A/D, and D/A designers need for embedded control and monitoring applications, and the Wildcat's compact board allows for easy integration.
Ethernet models are ideal for remotely monitoring and supervising another programmable system or web-enabling new or existing products.
|
|
PMC Gigabit Ethernet Controller
32/64-bit, 33/66 MHz PCI and/or 66/133 MHz PCI-X operation PMC Module
1 or 2 independent Gigabit Ethernet channels
Copper and/or optical transmissions supported
Auto detect of 10 Base-T,100 Base-TX or 1000 Base-T in copper network configurations
|
|
|
|
|
|
Model ROBO-N201G
One-port Gigabit Ethernet extension module with Portwell OmniPCI connection interface
Intel® 82540EM
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
One accessory card for extension Ethernet port(s), Link, and Speed indicators (Two LED indicators; one shows green when linked and blinks when transmitting or receiving data, the one shows green when linked at 100 Mbps and yellow when linked at 1000 Mbps)
One Ethernet RJ-45 daughter board and one daughter card
Support IEEE 802.3
Auto-negotiation algorithm of full-duplex and half-fuplex operation for 10 Mb/s and 100Mb/s (NWAY)
Dimension : 77(L) x 52(W) mm
Model ROBO-N100P
Fast Ethernet extension module with Portwell OmniPCI connection interface (P4 solution)
For Intel® Pentium® 4 processor based SBC
Intel 82559
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
One Ethernet RJ-45 daughter board and one daughter card
Support IEEE 802.3
Auto-negotiation algorithm of full-duplex and half-fuplex operation for 10 Mb/s and 100Mb/s (NWAY)
Dimension : 77(L) x 52(W) mm
|
|
Lanner network appliances deliver industry-leading performance, IO and dependability. Deploy your application on a Lanner network appliance platform for best-in-class compatibility, service quality and long-term supply.
Companies use a network appliance because it provides the following benefits over general purpose servers or computers:
* Easy deployment - Simply unpack, power on, configure IP and you're done
* Compatibility - Removes local environmental factors
* Long-term brand value - An appliance is visible, attractive and a constant reminder to your value
* Purpose design - Appliances optimize performance, security and scalability
|
|
The Epson fieldbus systems are the ideal connection of an Epson robot with an industrial fieldbus system. No matter if Devicenet or Profibus, the connection of fieldbusses to an Epson controller is completely integrated into the Epson developer surface Epson RC+.
So it is possible to use the high performant fieldbusses.
|
|
3U VME Boards
Complete line of 3U VME chassis & CPU boards along with a diverse line of plug in boards such as industrial I/O and communications, PCMCIA, VME ModPack & PMC carriers, ModPack and fieldbus.
For chassis, please follow the link systems.
|
|
NETcore® X APCI fieldbus cards
NETcore® X APCI are the fieldbus communication cards based on Hilscher NetX chip. They can be installed and can work on ASEM systems OT/PB800, OT/PB1000, OT/PB1200 and OT/PB1300 equipped with expansion slot. APCI (ASEM PCI) is a PCI bus customised by ASEM.
NETcore® X APCI is available for Profibus/MPI master and slave, CANopen master and slave, Industrial Ethernet master and slave for the protocols EtherCAT, Ethernet/IP, Powerlink, Profinet RT, Sercos III.
Thanks to this wide choice, to the user-friendly configuration tool and to the possibility of combinations with ASEM Premium HMI and CODESYS*, fieldbus connection is fast, functional and allows the development of complete and efficient systems dedicated to plant control and supervision.
|
|
PMC253
Advanced Profibus PMC Controller for Fieldbus Applications
Highly integrated EC-1 ASIC with ASPC-2 technology
Profibus DP V1 master (class 1/2) and slave
Up to 12 MBaud transfer rate
Optoisolated RS485 PROFIBUS interface
|
|
FPGA Processors
TS Series Processor boards are the foundational element of our FPGA Computing family. Each TS Series board has an Altera FPGA processor chip, a PCI interface, SRAM, SDRAM, an I/O module, and expansion slots for additional FPGA Computing power. These elements are interconnected by a high speed bus on the board.
If your needs are for advanced signal processing using multiprocessors, click here to see those products within the Multiprocessors family, including the V4DSP.
|
|
Frame grabbers convert signals from analog cameras into PC-usable data. The unique software interface of IDS frame grabbers allows the easy and fast integration into your application. Main fields of application are industrial automation and safety engineering.
EAGLE
- 4 CVBS video inputs
- 4 Hirose sockets with 12 pins inclusive 12 V camera power supply
- PCI Interface
|
|
pcIMAGE-SDIG
multistandard digital frame grabber
pcIMAGE-SRGB
variable scan frame grabber for RGB signals, replaced by mvTITAN-RGB/G4
pcIMAGE-SG
variable scan frame grabber for non-standard gray scale signals, replaced by
|
|
USB FrameGrabberBox
The USB FrameGrabberBox allows it, to store images from a video source directly onto a USB stick as high resolution still images without the need for a PC.
The USB stick can be plugged directly into a socket at the device. There are 3 LED´s to indicate the status and a controller input (HD version) respectively a pushbutton (PAL version) to start the image capture.
USB FrameGrabberBox HD version
The FrameGrabberBox HD stores high resolution Full HD images (still images with 1920 x 1080 pixels) PC independently onto a USB stick.
The video signal is supplied as analogue component (YPbPr max. 500mA)
PAL version
USB FrameGrabberBox PAL version
The USB ImageGrabberBox PAL stores video images (still images with 662 x 500 pixel) directly onto a USB stick.
The video signal is supplied as Y/C or SVHS
|
|
|
|
Computer boards
