|
|
This board is an interface board of PCI bus conformity which inputs a digital signal.
The opening-and-closing state of a switch can be inputted.
A maximum of 128 input can be performed on board.
"Attached API function library [API-PAC(W32)] The application software for Windows can be created by the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C++, by using it.
|
|
|
|
|
|
The new products are low-profile, RS-232C serial communication boards compliant with PCI Express. The board can expand asynchronous RS-232C serial communication ports on a PC with a PCI Express compliant slot. The board is available in three models different in the number of on-board RS-232C serial communication ports: 1-channel type "COM-1C-LPE", 2-channel type "COM-2C-LPE", and 4-channel type "COM-4C-LPE".
The three new models support high-speed communication at up to 921,600 bps. The bundled driver software can be used for Windows and Linux to recognize the on-board ports as OS's standard COM ports, allowing them to be set as COM1 to COM256. The board has high-capacity FIFO buffer memory: 128-byte transmit buffer and 128-byte receive buffer. The FIFO buffer memory can be adjusted in buffer size for starting data transmission/reception. You can optimize the buffer size for each application, for example by increasing the buffer size to reduce the CPU load or decreasing it to improve realtimeness.
|
|
Introduction
The CP-102E and low profile CP-102EL are 2-port PCI Express boards designed for POS and ATM applications. Moxa's PCI Express boards are a top choice of industrial automation engineers and system integrators, particularly since the boards support many different operating systems, including Windows and Linux. The CP-102E/EL's 2 RS-232 serial ports support a super fast 921.6 Kbps baudrate, and provide full modem control signals to ensure compatibility with a wide range of serial peripherals. In addition, the boards' x1 classification allows them to be installed in any PCI Express slot.
Features
PCI Express x1 compliant
921.6 Kbps maximum baudrate for super fast data transmission
128-byte FIFO and on-chip H/W, S/W flow control
Low profile form factor fits small-sized PCs Drivers provided for Windows (2000, XP/2003/Vista/2008 x86/x64), Linux 2.4, Linux 2.6 (x86/x64) QNX 6, Windows XP Embedded, SCO OpenServer 5/6, UnixWare 7
15 KV ESD protection on the board
|
|
|
|
|
|
Introduction
The CP-104EL is a smart, 4-port PCI Express board designed for POS and ATM applications. It is a top choice of industrial automation engineers and system integrators, and supports many different operating systems, including Windows, Linux, and even Unix. In addition, each of the boards 4 RS-232 serial ports supports a super fast 921.6 Kbps baudrate. The CP-104EL provides full modem control signals to ensure compatibility with a wide range of serial peripherals, and its PCI Express x1 classification allows it to be installed in any PCI Express slot.
Features
PCI Express x1 compliant
921.6 Kbps maximum baudrate for super fast data transmission
128-byte FIFO and on-chip H/W, S/W flow control
Low profile form factor fits small-sized PCs
Drivers provided for Windows (2000, XP/2003/Vista/2008 x86/x64), Windows CE 5.0/6.0, Windows XP Embedded, DOS, Linux 2.4, Linux 2.6 (x86/x64) FreeBSD 4/5, QNX 6, SCO Open Server 5/6, UnixWare 7
Easy maintenance with on-board LEDs and management software
15 KV ESD protection on the board
|
|
|
|
|
|
This product is the interface board of the PCI bus conformity which I/O digital signal.
Digital signal of 12-24VDC can be outputted and inputted.
Input of a maximum of 32 points and output of a maximum of 32 points can be performed in onAttached API function library [API-PAC(W32)] The application software for Windows can be created by the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C , by using it.
Features:
In order for 16-point unit to carry out common composition, it can common every respond to a different external power supply.
Since the PCI bus (personal computer) and the I/O interface are insulated by the photo-coupler, it excels in noise-proof nature.
32 points of an input signal can be used as an interruption input.
Moreover, the edge of the input signal which generates interruption can also be chosen.
It has the digital filter function for preventing the incorrect input by the noise or the chattering.
The rating of an output signal is a maximum of 35VDC and 100mA per point.
Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector pin compatibles.
|
|
|
|
|
|
With the PCI board APCI-3701 from Addi-Data the user can acquire up to 16 inductive displacement transducers of the type LVDT or Half-Bridge directly with a precision of
0.1 m according to the transducer type. Now the board is also available as 1-channel version, and is delivered with the calibration and update tool SET3701. The new unique calibration tool SET3701 is divided in two parts: In the first one, the administration area, boards and transducers are selected and in the second one, the calibration part, the transducers have micro-calibration. In the administration part the installed boards of the type APCI-3701 are recognised automatically. In the board firmware 14 common transducers with all parameters are already available. The user also can select pre-calibrated transducers or just add customer-specific transducers. The assistant, with integrated help-file, supports the user step by step. After the calibration a board test is possible: For each channel a window with a graphic opens, which reflects all acquired data. The standard delivery also includes programming samples for LabView, Delphi, C, VB, etc.
|
|
AdvancedMC Modules
AMC (AdvancedMC) is the PCI Industrial Computer Manufacturers Group's specification (PICMG AMC.0 , AMC.1, AMC.2, AMC.3 and AMC.4 respectively) for hot-swappable and field-replaceable mezzanine cards.
|
|
AdvancedTCA Boards
AdvancedTCA (ATCA) is the new standard for telecom applications bringing the features of proprietary architectures and the CompactPCI standard with his high packing density and RAS (reliability, availability, serviceability) together.
Please visit Kontron AdvancedTCA Integrated Platforms and learn more about the Kontron portfolio of GbE and 10GbE open modular platforms that are pre-validated and pre-tested just the way you need it to get your application to market quickly.
|
|
Start with features found in more expensive boards. The CX family of video frame grabbers are precision image capture boards in the ISA bus configuration. Each board has a digital synchronization scheme which delivers a rock solid image and an industry leading sampling jitter of just +/-3 ns for detecting image details at the sub-pixel level. Video noise is 0.7 least significant bit (LSB) out of 256 gray levels to meet the most demanding applications.
The CX family provides real time capture to true dual port video RAM mapped into the computer's memory. This allows fast, nondestructive, random access to a captured image even during capture and display.
Composite display output is available for viewing live video or a captured image on an external monochrome monitor. Text and graphics can be displayed on top of a live video or captured image with the optional overlay RAM, which provides 15 selectable gray levels.
|
|
PXC Frame Grabber Family
The Imagenation PXC provides high-accuracy and low-pixel jitter for color and monochrome frame grabber processing. Complete with features normally only found in more expensive boards, the PXC is an easy-to-integrate value for industrial and commercial applications.
Specifications:
- Bus PCI bus master design for real-time image capture
- Input video format NTSC, PAL, SECAM, S-video
- Input video 1 V peak to peak, 75 ohms
- Output formats Color: YcrCb 4:2:2 and 4:1:1; RGB 32, 24, 16, 15; Monochrome: Y8
- Resolution NTSC: 640 x 480; PAL/SECAM: 768 x 576
- Power + 5 VDC, 500 mA
- Camera Power + 12 VDC output
- Supported Operating systems Win 95 / 98 / ME, Win NT / 2000 / XP
- Supported Languages C / C++, C#, Visual Basic and Visual Basic .NET
|
|
|
DALSA's analog frame grabbers support both monochrome and color applications. In addition to supporting conventional Peripheral Component Interfaces (PCI and PCI-Xpress) DALSA image acquisition boards support 3rd generation PCI-Express interconnects.
|
|
|
|
|
|
|
The PIXCI SV5 is a video-rate frame grabber that captures high quality, uncompressed, scientific quality digital images from standard analog output video sources. The PIXCI SV5 frame grabber digitizes analog video from NTSC, RS-170, PAL, or CCIR format sources such as cameras, camcorders, VCRs, and ultrasound imaging systems. Color (NTSC, PAL) and monochrome (RS-170, CCIR) video formats are supported. Capture images with 754 by 480 resolution from any NTSC, NTSC/S-Video, or RS-170 video source. Capture images with 922 by 580 resolution from any PAL, PAL/S-Video, or CCIR video source. Analog image data is digitized and transferred to motherboard memory with less than one horizontal line time delay. As a PCI bus DMA master, the PIXCI SV5 frame grabber burst transfers image data without using the host computer's processor. Live video display is provided with software that transfers the image from motherboard memory to a graphics card or subsystem. Live, 30 frame per second (fps) display, is available when capturing from any NTSC, NTSC/S-Video, or RS-170 video source. Live, 25 fps display, is available when capturing from any PAL, PAL/S-Video, or CCIR video source.
|
|
These new boards are compatible with L Series PCI board products and feature high-precision 16 bit analog input and output, digital I/O and a counter function. Other than their bus interface, these new boards share the same specifications as existing L series PCI products allowing applications to be easily transferred through hardware setting changes. External pin assignment and connectors are also the same allowing the user to use existing cabling.
|
|
Product specification:
- #8 differential analog inputs, 12 bits
- Selectable ranges: 0/10V, -5/+5V, -10/+10V
- An output voltage reference per channel of 10VDC 5mA is available
- External connectors provided
|
|
PXR Frame Grabber Family
The Imagenation PXR, a precision monochrome analog frame grabber can be used with progressive scan or resettable cameras for guaranteed grabs.
Specifications:
- Bus PCI bus master design for real-time image capture
- Input composite video format Monochrome, RS-170 (NTSC), CCIR (PAL), interlace, progressive scan and resettable
- Input video Software selectable termination (75 ohms or 10K ohms)
- Resolution RS-170: 640 x 480 pixels (maximum 768 x 486 pixels); CCIR: 768 x 576 pixels; 256 gray level, 8 bit
- Power + 5 VDC, PCI, 700 mA
- Camera power + 12V at 1A for four cameras
- Supported operating systems Win 98, 98-SE, 2000, ME, NT4, XP
- Supported languages C/C++, C#, Visual Basic and Visual Basic .NET
|
|
|
Model 5200 is a Single-Channel PXI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is ArbConnection software, which is used for controlling the 5200 and for generating, editing and downloading waveforms from a remote computer.
|
|
For Industrial Computing, Lanner offers a variety of backplane choices for Full/Half-sized SBCs to fulfill diverse requirements. Integrated with suitable chassis and power supply units, this product line can satisfy a wide variety of computing requirements in different situations.
http://www.lannerinc.com
|
|
|
|
|
|
PICMG 1.3@Industrial Backplane
Model PBPE-06V
Vertrical 6-slot [PCI-E x1 (4),PCI-E x16 (1)]PICMG 1.3 Backplane
Fit for 2U chassis
Four USB ports
Dual SATA port
24-pin ESP12V power connector
Model PBPE-14AD64
14-slot [PCI-E x4 (1), PCI-E x8 (1), PCI-X (8),PCI (3)] PICMG 1.3 Backplane
Fit for 4U chassis
Dedicated to ROBO-8920VG2
Four PCI-X buses support eight PCI-X expansion slots
ModelPBPE-19AG64
19-slot [PCI-E x8 (1), PCI-E x4 (1),PCI-X (16)]
Fit for 4U up chassis
Dedicated to ROBO-8920VG2
Four PCI-X buses support 16 PCI-X expansion slots
PICMG 1.2@Industrial Backplane
Model PBP-14PD64
14-slot (4xPCI-X) 64-bit PICMG 1.2 backplane
PICMG 1.2
Four PCI-X buses
1 SHB, 2 PCI-X, 3 PCI-X, 3 PCI-X and 4 PCI-X
Fit for 4U chassis
283(L) x 317(W) mm;11.14"(L) x 12.48"(W)
Model PBP-06V564
Vertical 6-slot (2xPCI-X, 3xPCI) 64-bit PICMG 1.2 backplane
Fit for 2U chassis
ATX power connector support
321.94(L) x 83(W) mm;12.67"(L) x 3.27"(W)
ModelPBP-06P564
6-slot (2xPCI-X, 3xPCI) 64-bit PICMG 1.2 backplane
Fit for 6-slot node chassis
ATX and aux power connectors support
310(L) x 140.2(W) mm;12.2"(L) x 5.52"(W)
PICMG 1.0@Industrial Backplane
Model ACTI-14P4
14-slot (4xPCI) Active PICMG Backplane
2.4 mm PCB thickness
ATX power connector support
Fit for 14-slot chassis
317(L) x 257(W) mm;12.48"(L) x 10.12"(W)
Model PBP-19AI
19-slot (18xPCI) active PICMG backplane
Suitable for advanced CTI application
ATX power connector support
415.4(L) x 265.2(W) mm;16.35"(L) x 10.44"(W)
Model PBP-19P4
19-slot (4xPCI) PICMG Backplane
Fit for any 20-slot chassis
ATX power connector support
Sufficient ISA slots for CTI application
415.4(L) x 265.2(W) mm;16.35"(L) x 10.44"(W)
Model PBP-02V1X
Vertical 2-slot (1xPCI) PICMG backplane
Fit for 1U chassis
ATX power connector support
327.9(L) x 33.7(W) mm;12.91"(L) x 1.33"(W)
|
|
|
Intel-based computers that deliver full PC functionality to the user from a centralized location. The blades are compact and house the latest PC components including Intel Core 2 Duo, Xeon and Pentium 4 processors with Hyper-Threading, DDR2 memory, SATA hard drives and NVIDIA graphics cards.
|
|
|
|
|
|
IPnexus CPC5900 High-Performance IP Storage Blade
The CPC5900 is designed for embedded storage applications. NAS applications such as file serving, data caching and shared storage can be provided by NFS or SAMBA services. Database applications are supported via iSCSI for block-level storage access. With its onboard PowerPC processor, the CPC5900 can also be used as an application server where disk intensive services are required, allowing payload blades in the platform to operate without a locally attached hard drive, increasing system reliability and capabilities.
The CPC5900 is a high-performance, high availability NAS or SAN storage blade solution for CompactPCI, PICMG 2.16 systems supporting 800GB of storage. Each storage blade features two 3.5" enterprise-class SATA hard drives with board-level hot-swap and drive-level hot-swap for complete flexibility, high reliability and high storage capacity. The onboard high-performance PowerPC processor operates on Performance Technologies' NexusWare CGL 3.2 registered/ POSIX compliant Linux development environment. Block Disk I/O is supported over iSCSI for SAN applications and FIle I/O is supported using NFS and SAMBA for NAS applications. Network connectivity is provided by dual Gigabit network ports connected to the PICMG 2.16 Ethernet port on the backplane.
Highlights
High-Density 6U x 2-Slot CompactPCI Form Factor
800GB capacity
Supports RAID 0/1/0+1/4/5/6
Board-Level & Disk-Level Hot-Swap
Headless Operation for Drive Removal and Insertion
Block Disk I/O over iSCSI
File I/O over NFS and SAMBA
PICMG 2.16 Compatible
Dual 10/100/1000 Ethernet Ports Routed to the Mid-Plane
AMCC High Performance PowerPC Processor
Dual Enterprise-Class 3.5" SATA Hard Disk Drives
Additional drives may be added to rear panel board
PICMG 2.9 compatible with onboard IPMC
|
|
CIERRE produces traditional cards and SMT of Civil and Industrial type.
Assembly SMT comes executed with automatic lines with ability until 30.000 members now.
|
|
|
In the field of automation, the ability to communicate is already among basic functions of each device. But these requirements far outstrip the RS232 interface used up to now with the company's own protocol. In their place, open fieldbus interfaces oriented to the customer and market are promoted. Short development times and high costs, in which the efforts for the configuration tool and the software maintenance must be taken into account, have led to the development of our own COM module.
|
|
|
Whether you are communicating with devices such as process instruments, programmable logic controllers (PLCs), smart sensors, and single-loop controllers, or performing instrument control from your PC, National Instruments offers a variety of reliable and easy-to-use hardware and software tools to help you meet all your communication needs.
|
|
|
|
|
|
Enterprise
Model NAR-7080
2U communication appliance rack-mount server with redundant PSU and flexible Ethernet modules
Dual Intel Nocona CPU with 1/2M L2 cache/ 800MHz FSB
Flexible removable Ethernet modules
Up to Twelve Gigabit Ethernet ports
Optional crypto PMC card
Four DDR400/DDRII memory slots
Up to two PCI-X expansion slots
Redundant 460W ATX PSU
Front access for user-friendly maintenance
Optional crypto solution
Bypass option
Small to Medium Business
Model NAR-5620
1U communication appliance rack-mount server with 2 PCI-E I/O modules and PCI-X expansion slot
Removable PCI-E Ethernet modules for flexible application request and easy maintenance
Supports Intel Core Duo and Core 2 Duo CPU up to 2.33GHz
Supports FSB 667 MHz
Support DDR2 ECC RAM up to 4GB
Up to Eight Gigabit Ethernet ports
Support up to 4 bypass segments
Dual Personality for flexible use of Fiber-optical or copper interface
One real accessible PCI-X expansion slot
SOHO/ROBO
Model NAD-2070
Fanless Desktop Communication apliance platform with up to five Ethernet ports
Cost-effective fanless solution
Upgradeable to VIA V4 Eden 1.2GHz CPU performance
Support max to five Ethernet ports
256MB memory and SODIMM socket on board
Support Compact Flash and Disk on Module (DOM)
Optional bypass function for project base application
OS: support most updated Linux
Power adapter solution
|
|
ADDI-DATA offers interference-free boards for the CompactPCI bus for the industrial measurement, control and automation. The measurement boards are available with 6U or 3U bracket.
- Digital I/O, 24 V
- Analog I/O, multifunction boards
- multifunction counter board: incremental counter, SSI synchronous serial interface, counter/timer, pulse acquisition, frequency , pulse width , period duration, velocity measurement, PWM, BiSS-Master, digital inputs and outputs, ...
- Communication board
- Motion control boards
Protective measures:
- Optical isolation from 500 V to 1000 V
- Separation between analog and digital signals
- Protection against short-circuits, overtemperature and overvoltage
- Input and output filters
- Industry-standard SUB-D connectors
Free drivers for standard operating systems and programming samples.
In preparation: Open Source real-time PAC system in CompactPCI format
|
|
6U CompactPCI Boards
Full line of 6U CompactPCI products supporting PICMG 2.16, IPMI, Hotswap, TPM, System Management. For more information on CompactPCI integrated systems, please click here systems
A complete overview provides Kontron's CompactPCI Product Guide.
|
|
Today, the PC assumes a key position in automation technology. Together with a real-time operating system, e.g. Windows NT, it creates an ideal hardware platform for control and visualisation of process data. By using so called SoftPLCs the PC penetrates into application areas that have been the domain of classical programmable controllers.
Fieldbus systems with remote input and output modules are used for the data transfer between the PC and the automation equipment. We offer special interface cards since the PC does not feature a direct link to the fieldbus.These intelligent cards manage the entire data transfer. Only useful data are passed onto the user applications.
|
|
|
NAI offers a variety of PCI-based COTS and Custom Boards, specifically designed for the rugged-Military and Commercial Aerospace markets. Our DSP-based designs offer unusually high function density, high resolution and accuracy, and low power consumption. Standard features include extensive diagnostics, background Built-In-Test (BIT), auto-ranging of signal inputs, self-calibration, galvanic isolation, and field programmable parameters. A Windows 9x+/PNP Software Support Kit (SSK) with board-specific library (DLL) is supplied to facilitate applications development.
|
|
16 Channel 12-Bit Analog Input Board
16 (8 optional) channels
Resolution 12-bit
Basic accuracy of 1 LSB
Input voltage range 0..5V, 0...10V, 5V, 10V
|
|
The 8011 digital I/O interface provides 8 optically isolated inputs and 8 Form C relay outputs. The inputs protect the PC and other sensitive equipment from spikes and ground loop current that can be generated in industrial environments, while the outputs provide higher current capabilities (up to 2A) and are optimized for 24V operation. Form C relays can be wired for either normally open or normally closed operation.
If your application requires RoHS compliance, order the 8011-RoHS.
Sealevel's SeaI/O Classic software drivers and utilities make installation and operation easy using Windows 98, ME, NT, 2000, XP and Vista operating systems.
Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.
|
|
|
|
Computer boards
