|
|
|
|
|
|
The Vehicle Bus Analyzer Speaks Your Language
The Vehicle Bus Analyzer is the first conventional oscilloscope to decode CAN serial data into Symbolic (application layer) text. Now, for the first time, an engineer has both the full range of CAN protocol stack information-symbolic, hex, and electrical signal-and the ability to view additional in-circuit electrical signals (sensors and actuators, voltage levels, transients, etc.) that influence the CAN bus. In addition, up to four different CAN buses can be decoded at one time. Standard and specialized oscilloscope tools can be used to validate and debug designs.
Eliminate the Barriers to Fast Debug
Direct symbolic decoding and triggering allows fast and intuitive understanding of events. Simply load your existing DBC database file into the oscilloscope (no re-entry of data is required); capture CAN message traffic; and all electrical (signal), protocol (hex), and symbolic (application) layer information is quickly displayed on the oscilloscope screen. Use standard oscilloscope and specializedVehicle Bus Analyzer tools to find rare events, automatically measure and statistically analyze event timing, and graph/plot information, including extracted CAN message data.
Unique Measurement Tools
The VBA can make many measurements not possible with other instruments. Aside from timing measurements, the VBA can also extract CAN data from a CAN message stream, graphically plot that data on the oscilloscope display, and compare it to other electrical signals. Here, information on the steering angle and steering angle rate of change is extracted from the CAN message acquisition, rescaled to decimal values, and plotted as a time-correlated "Track" on the VBA display.
|
|
|
Agilent network analyzers accurately characterize components by measuring their effect on the amplitude and phase of swept-frequency and swept-power test signals.
|
|
The ultimate platform for network experts. Combines physical, optical, transport and datacom testing in a single box. Perform simultaneous acquisitions and fast data post-processing, and benefit from a scalable range of test applications and field-interchangeable modules.
Key Features and Benefits
Five configurations (two-slot, four-slot, seven-slot, eight-slot and bus protector), providing maximum flexibility for long-haul, metro, DWDM, high-fiber-count, Ethernet, SONET/SDH or DSn/PDH test applications
Pentium-powered, with up to 512 MB memory
Easy-to-read, high-resolution 12.1 inch TFT screen
Windows® operating system
Simultaneous acquisitions and fast data post-processing
|
|
Willtek Secures Railway Safety
Based on the Willtek 4200, the Willtek 4202R Mobile Service Tester is dedicated to new features and frequency bands introduced by GSM-R, the railway communication system based on GSM. The Willtek 4202R is the first GSM-R test instrument for service applications, and its small size and low weight make it the ideal choice to test and repair applications requiring mobility.
Proper Performance Helps Emergency Situations
The Willtek 4202R allows the simulation of group calls (VGCS) at various priority levels. This includes emergency calls based on group calls to verify not only the performance of the cab radios, but also of peripherals such as optical and acoustical alarms. These tests ensure proper performance of the radio system and help prevent disaster in emergency cases.
|
|
|
|
|
|
2201 ProLock
The 3G mobile phone tester for repair shops
Willtek’s 2201 ProLock is a reasonably priced test instrument for 3G mobile phones and wireless data cards. Level 1 and level 2 service shops use ProLock to quickly test wireless devices, perform smaller repairs and bill manufacturers for warranty claims.
The 2201 ProLock is similar to the 4100 and 4200 series instruments because it is small, easy to use and affordable to large mobile phone retailers with a repair shop in the back office. ProLock, however, supports both GSM and WCDMA phones and wireless devices. Many mobile phones today include WCDMA functionality; manufacturers start to demand WCDMA testing in case of warranty claims from repair shops. ProLock fills the gap between the cheap GSM-only testers and sophisticated 3G test sets!
Repair shops and manufacturers benefit
Local, small and medium size repair shops have been replaced by centralised repair factories. This led to customer dissatisfaction and high cost for small repairs or in the No Fault Found case. With the 2201 ProLock, smaller repair shops filter out these phones and return them to the customer almost immediately, resulting in satisfied customers and low cost of reverse logistics.
|
|
|
|
|
|
NetSpector enables protocol analysis in switched networks from one central point. The network sniffer is modularly designed: Display unit and recording agent are separate and can be used at different locations.
The display unit is the user interface with which data recording is controlled and the recorded data are indicated. The recording agent is responsible for the actual recording (capturing). It is either installed on the same station on which the display unit was installed or – and this is the special feature – on a remote station.
The recording agent records network communication on the remote station and, when necessary, sends it to the indication station. The display unit can be run on the local workstation while the recording takes place remotely on a switch.
Real and local data flow can be recorded by targeted placement. The problematic effects of active components connected in between (routers, switches, bridges) are thus avoided.
NetSpector captures all frames from the start up. Each station participating in network communication is registered and added to a station list. From the station list you select the station to investigate and you create the frame list of the selected station. The colour labelling of the frames makes it easier for you to find individual frames. The frame you see fully decoded and in detail in the frame detail window. In addition it is also possible to display the frame content as hexadecimal and ASCII in the frame hex window.
|
|
Advanced diagnostics
The Advanced Diagnostics Module for the Power Hub monitors the physical layer and communication online and in real time. A comprehensive set of measurements brings transparency to field device communication. It helps you speed up your processes because you know where to look:
Speed up commissioning: Check device polarity, noise, jitter, duplicate addressing. The Commissioning Wizard automatically configures alarm values, historian and other values to inform you about changes that may harm your process plant communication.
Optimize your plant during start-up: Fine-tune fieldbus communication
Increase plant up-time: Detect and resolve issues before they become problems
Enhance troubleshooting techniques: Look at details via the built-in oscilloscope
All data is readily available in the control room via easy to use DTMs. Fieldbus just got much easier. Advanced Diagnostics is the perfect tool for the expert and the novice user.
|
|
NetTEST II is an essential must-have analysis and test tool for the
successful operation, maintenance and service of any PROFIBUS network.
Already the basic system for detecting installation errors sets a new standard in the field of analysis and test tools.
With the DP Master functionality NetTEST II becomes an outstanding tool for the mobile commissioning of DP Slaves. The entire PROFIBUS
network can be lined up without using a PLC.
Equipped with the online functionality NetTEST II also detects sporadic errors in running systems. So NetTEST II becomes the absolute all-rounder among PROFIBUS analysis and test tools.
The automatic generation and filing of detailed test records fulfils all
requirements of state-of-the-art quality management systems.
|
|
|
|
|
|
Diagnosis Tool for PROFIBUS (DP and PA) and Foundation Fieldbus FF H1
The Busmonitor is an indispensable tool for commissioning, maintenance and diagnostics of PROFIBUS and Foundation Fieldbus networks, as well as for the development of PROFIBUS and Foundation Fieldbus products.
Because of the PCMCIA interface it can be installed on a portable PC. This makes it perfectly suited for the requirements of every day use. The ease of use is guaranteed by simple handling of the tool without need of time consuming training.
In online operation the PROFIBUS DP Busmonitor records the message interchange up to a baud rate of 12 Mbit/s (DP) with single bit accuracy. The passive RS485 interface, which is integrated in the plug, guarantees a reactionless measurement during the operation of the bus. In Foundation Fieldbus FF H1 operation with the active IEC1158-2 probe head all telegrams are recorded as well.
In offline mode the recorded messages are displayed. They can be decoded on different protocol levels (physical level, FDL, DP-DPV1 or combined). The recording contains a precise time stamp providing a precise measurement of the bus timing even with 12 Mbit/s (DP).
A various number of filters can be defined for recording as well as for displaying messages. These filters can also be used to search for certain messages. The start of a recording session can be defined by trigger conditions, i.e. a certain telegram or the n-multiple appearance of a telegram.
With the remote control functionality the Busmonitor can be remote-controlled by any other computer via the DCOM interface.
|
|
|
|
|
|
The PB-T3 is the most widely used bus testing tool worldwide for PROFIBUS DP physical segment and signal testing. It is indispensable for installation, commissioning, preventive maintenance and troubleshooting. Functions:
• Non-reactive measurement of physical characteristics during operation
• Intuitive user interface in English, German, French, Italian and Chinese
• Automatic detection of the baud rate of all bus stations
• Fieldbus topology scan
• Display of quality levels to indicate the signal quality of each station
• Reliable detection of even very short-lived faults
• Storage oscilloscope with trigger output
• Long-term measurement
• Master simulator for measurements even without a PLC
• Detailed test report and handover certificate
The bus check product line from Softing features a range of efficient diagnostic tools for different fieldbus systems. Besides the PB-T3 PROFIBUS Tester, the PROFIBUS portfolio comprises the BC-400-PB and BC-450-PB Protocol Analyzers for PROFIBUS DP+PA, and the BC-230-PB Diagnostic Monitor for PROFIBUS PA.
|
|
|
|
|
|
BC-450-PB Protocol Analyzer
for PROFIBUS DP+PA
This powerful diagnostic tool analyzes PROFIBUS communication during operation. Intended for both service technicians and fieldbus experts, it provides support in commissioning, optimization, preventive maintenance and troubleshooting. PROFIBUS DP and PA networks can be connected simultaneously; the network type is detected automatically. The Diagnose mode continuously analyzes the state of each station on the bus and shows the results in a clear, easy-to-read display. Functions:
• Live list indicating station states using “traffic light symbols”
• Event counters for retransmissions, restarts and diagnoses
• Cyclic and acyclic input and output data
• Parameterization and configuration data
• Complete plain text decoding of all diagnostic information
• Unique support of the Simatic Diagnostic Repeater and the DP/PA Link
• History for diagnostics and events
• Detailed test report and handover certificate
The Trace mode logs and displays the frames according to user-defined trigger and filter settings, such as PROFIBUS services, addresses and data. Even a slow deterioration in the physical state of a fieldbus can be detected indirectly on the basis of error frames, retransmissions and device restarts.
The bus check product line from Softing features a range of efficient diagnostic tools for different fieldbus systems. Besides the BC-450-PB Protocol Analyzer for PROFIBUS DP+PA, the PROFIBUS portfolio also comprises the purely DP-oriented BC-400-PB Protocol Analyzer as well as the PB-T3 Signal Tester for PROFIBUS DP and the BC-230-PB Diagnostic Monitor for PROFIBUS PA.
|
|
|
|
|
|
901 TDR LAN Cable Tester
Handheld TDR Meters
Model 901 is specially designed to speed up the onsite testing of data networks and production testing of cable assemblies. The meter quickly tests shielded and unshielded LAN cables and identifies all commonly found Pair, Split Pair, and Reversed Pair. Digital display shows these 5 common wiring faults and the provided 1 Female RJ45 to Female BNC remote identifier will make wire-mapping a breeze.
Features:
- Accurate to 2" (5 cm) throughout the entire range up to 2,000 ft (600 m).
- Digital Display shows 5 common wiring faults: Open Pair, Shorted Pair, Crossed Pair, Split Pair, and Reversed Pair.
- Includes 1 remote identifier for wire mapping.
- Extra-large backlit (ICON type 7 segment) LCD.
- Automatic output impedance control, auto-range, auto-zero and auto-sensitivity allows for closely matching to a wide range of cables under test. Only V.O.P (Velocity of Propagation) settings required.
- User-friendly menu on screen operation for easy-to-use.
- Measuring capability of the V.O.P of a sample cable.
- 20 internal memory locations store up to 20 traces for future analysis.
- Internal library of 39 standard cables.
- Tone Generator (Oscillating 910 to 1100 Hz with 5 Vp-p).
- Line Voltage Detection: Displays "OUCH" message and stops operation if line voltage exceeds 6.5 V.
- Safety Protection (up to 250 V RMS).
|
|
|
|
|
|
|
The DMM is a professional instrument with TRMS measurement of AC/DC voltage, AC/DC Current (through external clamp), Resistance and Frequency. Additional features are MAX/MIN/AVG function, HOLD function and PEAK detection with Response Time of 1ms, useful for surge currents detection. The Safety Tester features allow to perform test on electrical plants according to VDE0413. Measures of Continuity, Insulation, Global Earth value (also with 0.1W resolution), RCDs test, phase sequence indication and phase coincidence (using only one Test Lead even just touching even insulated cables or two Test Leads) and Leakage current (with HT96U clamp + NOCANBA connector) will be easily performed thanks to this new extremely compact instrument. An innovative function (AUTOTEST) automatically performs main safety checks in the plant (Earth Resistance measurement, RCD Test, Insulation Test) just connecting the instrument to a socket and pressing the TEST button. The instrument will give you a final response (OK or NOT OK) about the safety of the plant under test. Finally the LAN checker function allows you to check if the wire mapping in a LAN cable is correct or not with easy indications about the found errors, which will guide you though the troubleshooting. M75 is completed by a modern selector function knob, a large numeric display for easy readings of measurements and a protection rubber holder to prevent accidental damaged.
|
|
|
LeCroy's oscilloscopes can be turned into mixed-signal oscilloscopes (MSOs) with the addition of the MS-500 or MS-250 mixed-signal oscilloscope options. In addition, I2C, SPI, UART, RS232, LIN, and CAN triggering and decoding options turn these oscilloscopes into all-in-one analog, digital, and serial data trigger, acquisition, and analysis machines.
|
|
The VC200 is the ideal tool for testing GSM/WCDMA Mobiles during manufacture, maintenance, servicing, troubleshooting and point of sale.
Low cost GSM/W-CDMA mobile phone tester
- Supports all GSM & W-CDMA frequency bands
- Signaling tester mode
· Auto test mode
· Manual test mode
- Tx/Rx Tester mode
- Suitable for manufacture, maintenance and servicing
- Compact and lightweight
|
|
|
|
|
|
Willtek offers solutions for the test of mobile phones. Our solutions address the RF performance of the phone. Willtek offers different solutions, depending on the application:
Point of Sale / Point of Return - Go/NoGo testing
Very often phones returned into the service loop are not having any technical problems, the problems are more to do with bad coverage or "manual not read" syndrome. In order to prevent these phones being returned for service , testing should be done at a very early stage at the point of sale or point of return. Willtek's Go/NoGo testers are well known for their ease of use and uncomplicated user interface. Despite the simple user interface, the test sets are performing measurements according to the respective standards (e.g. GSM, CDMA2000, etc.)
Service and Repair Workshops
Because time and test speed are critical for today's service and repair shops, it is important to have a flexible test set which can test and align many different phones - and support the specific measurement routines required by different manufacturers. Willtek's test solutions are designed with a multi-technology platform, allowing them to invest in one instrument that supports all of today's technologies.
Manufacturing
In manufacturing time and simplicity of testing is crucial. Manufacturers focus on simple RF measurements to tune and align the phones. Willtek's test solutions provide fast, easy testing while providing comprehensive results. And as with our other solutions, the multi-technology platform helps manufacturers preserve their test equipment investment.
|
|
The Xgig® Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market. With its wide range of capabilities, including intelligent triggering, automated capture, and Xgig Expert analysis, troubleshooting time is reduced from hours to minutes.
Protocol Support:
* 1, 2, 4, 8 Gb/s Fibre Channel
* 1.0, 10 Gb/s Ethernet
* 10 Gb/s FCoE
* 1.5, 3.0, 6.0 Gb/s SAS/SATA
* 1, 2, 4, 8 Gb/s Fibre Channel
Function Support:
* Analyzer
* BERT
* Load Tester
* Jammer / Error Injector
* Target Emulation and Traffic Generation
* Compliance Test
|
|
|
|
|
|
JDSU's proven family of Bus Doctor RX analyzers empowers computing, storage, silicon, and design engineers to simplify and accelerate the design and troubleshooting of serial and parallel buses used in electronics and computing products. Bus Doctor is unmatched in its flexibility and advanced analysis capabilities, including the industry's large trace buffers – twice the size of computing solutions – at 18.4 GBs and capable of capturing 256 million events bi-directionally with 4 nanosecond capture resolution. Trace capabilities are further extended through hardware-assisted features such as powerful cross-sequence triggering, extensive filtering options, advanced search capabilities, protocol-aware capture including automatic bus configuration, the ability to segment trace buffers, and accurate capture of specific bus events even across protocol domains. With Bus Doctor, engineers can quickly identify, locate, analyze, and resolve even the most complex issues faster and more accurately while significantly accelerating time-to-market.
With its modular architecture, the Bus Doctor becomes a dedicated analyzer for different bus types simply by changing out protocol pods and TAPs. In this way, users can leverage the Bus Doctor platform to extend their test tool budget across 13 serial and parallel buses, including SCSI, P-ATA, USB, SATA, Memory Card (MC), and PCI Express. With an additional logic analyzer probe, the Bus Doctor is effectively 14 distinct analysis tools in one.
|
|
The AP-4000 captures the wireless signals between a base-station and a mobile terminal and analyzes the protocols. With its excellent analysis capabilities, AP-4000 is the perfect partner for interoperability testing.
- 3GPP FDD Compliant
- Analysis of UP Link and DOWN Link
- Analysis of Protocol Layers 1.2 and 3
- Analysis of C-P-lane RRC/NAS decode
- Analysis of U-Plane IPv4 Header/H245 PCAP Format Export
- Automatic Trace Mode using RRC message feedback
- Cell Search function
- MS Selection
|
|
|
|
|
|
PCI Express® Protocol Analyzers and Exercisers
The extensive PCI Express test equipment family from LeCroy includes expert analysis systems designed to meet your PCI Express needs. The PETracer ML system supports lane widths up to x8, while our most advanced systems, the PETracer EML and Summit Gen2, support up to 16 lanes with trace memory of 8 GB. The new PETracer Summit Gen2 is the first analyzer to support PCI Express Spec 2.0 (Gen2) traffic at 5 Gb/s per lane.
SAS/SATA Protocol Analyzers and Exercisers
Analyzers and exercisers from LeCroy for Serial Attached SCSI (SAS) and Serial ATA (SATA) deliver the power, flexibility, and features you need. The SASTracer Analyzer and SASTrainer Exerciser support both SAS and SATA traffic at speeds up to 3 Gb/s, while the SATracer Analyzer and the SATrainer Exerciser offer lower-cost solutions dedicated to SATA.
USB Protocol Analyzers and Exercisers
LeCroy provides a comprehensive range of solutions for all USB data rates, including Hi-speed (480 Mb/s), Full-speed (12 Mb/s), and Low-speed (1.5 Mb/s). The development tools provide a variety of solutions from the high portability of the USBMobile HS Analyzer to the powerful, flexible, and upgradable USBTracer/Trainer Analyzer and Exerciser System.
Fibre Channel Protocol Analyzer System
The LeCroy FCTracer 4G Analyzer supports all Fibre Channel data rates up to 4 Gb/s. The FCTracer supports up to four channels (two full-duplex links), and allows cascading of multiple analyzers to provide a synchronized display of up to 16 links for testing of switches and similar multi-port devices. Interchangeable plug-in modules support easy expansion and upgrading of the system.
|
|
|
|
|
|
Exceptional Tools for Serial Data Analysis
The LeCroy SDA family of products, built on the world's fastest Real-time Oscilloscope architecture, delivers outstanding real-time measurement solutions for signals with data rates up to 10 Gb/s and combines the analysis capability of several different classes of equipment in one single-box solution.
The SDA 18000 serial data analyzer is a true breakthrough in signal analysis. It delivers the industry's highest bandwidth — 18 GHz — as well as a combined highest sampling rate of 60 GS/s and longest memory of up to 150 million points available in a real-time test instrument.
Serial Data Analyzer
Based on the industry's most advanced digital oscilloscope platform, the SDA 18000 is a 4-channel real-time analyzer that offers outstanding analysis capability, accurate jitter analysis, and pristine signal fidelity up to 10 Gb/s data rate. The SDA 9000 serial data analyzer delivers 9 GHz analog front end bandwidth with up to 40 GS/s and memory depths up to 100 Mpts/channel.
With Serial data - both optical and electrical - being a dominant form of data transmission, fast and accurate analysis becomes a top priority. LeCroy offers a complete set of measurement tools for serial data analysis by providing exceptional vertical market solutions at the physical layers and at the protocol level.
|
|
|
|
|
|
2303 Stabilock
Regular testing of TETRA phones ensures safe and reliable communication
In critical situations, users in the public safety and security sector fully rely on their communication devices. To help organisations such as police, fire brigades and paramedics provide maximum safety and reliability to their users, Willtek designed the 2303 Stabilock. It is the first TETRA mobile station tester which is specifically made for testing TETRA radios in a service environment. Service managers can now use the affordable instrument to ensure that the radios are fully operational; this is particularly important for the police, fire brigades and paramedics where lives may depend on proper communication tools!
The 2303 Stabilock delivers precise results the fast way. No matter if Trunked Mode or Direct Mode (optional), 400 or 800 MHz band: After setting up network parameters and frequency range the tester is ready for operation. The high contrast 6.5” TFT colour display is split into four sections for clear reading of test results in numeric or graphic format. All settings and commands are accessible via six softkeys or with one-hand operation using the turn-and-push dial. Reducing TETRA complexity to what is really needed in service – with this operational concept, users can operate the instrument easily with a few key presses on the Stabilock’s high-quality click-type keyboard. Alternatively, a standard USB mouse provides access to all screen elements as on a PC.
|
|
| ... products without technical information |
| |
|
|
Digital logic analyzers, Communications network analyzers,...
