|
|
| Products 151 to 180 of 267 |
With BL ident the user is free to choose interface modules in IP20 or IP67.
Interface modules with PROFINET-DP (DPV0 and DPV1), DeviceNet, Ethernet/Modbus TCP/IP, Ethernet/Profinet and Ethernet/IP with up to 8 channels are available.
Programmable gateways enable decentral and fast signal processing.
The modular concept allows the user to add input and output modules to the interface at a later stage.
All channels operate in parallel allowing data to be transmitted simultaneously.
The diagnostics for the fieldbus, the supply voltage and the individual channels is carried out via LEDs and complemented by fieldbus-specific diagnostic messages.
Standard function modules are available for simple integration in the control and fieldbus environments.
The application of the BL ident simple module (BL20-2RFID-S, BL67-2RFID-S) is also possible. This way the communication is built on the basis of an 8-byte I/O module. The programming effort is reduced considerably. The user has the freedom to link BL ident to all standard control systems without using function modules. |
|
Escort Memory Systems is known within the industry for products that support virtually every industrial communication protocol making them ideal for integrators and end users facing real life scenarios.
Our selection of interface modules for HF Rfid systems feature a high level of connectivity to Industrial Ethernet networks and Manufacturers of plcs (Allen Bradley, Modbus and more).
Recently Escort Memory Systems has introduced several new Industrial ethernet gateways and Hubs for use with the Cobalt HF Series Professional antenna Controllers.
These modules features include:
- Easily integrate RFID data directly into an Ethernet host(standard and industrial)
- Build RS485 networks of multiple Controller/Antennas
- Industrial I/Os that can be linked to the Controller/Antennas to control stack lights conveyers etc. |
|
| Perfect approach to sophisticated RISC based embedded computers (75 x 115 mm). RISC based Computer-On-Modules (ARM/Xscale, PowerPC) |
|
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector manufacturer for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm
Model ROBO-U160
SCSI extension module with Portwell OmniPCI connection interface
Adaptec AIC7892 SCSI Ultra 160/m controller
Compact sized
Proprietary PCI connector for piggy back (board to board) connection
Fully PCI Bus spec. V2.1 compliant
68-pin SCSI connector located at PCBA component side
Support SCSI Ultra 160/m
Single channel
With 68-pin LVDS SCSI cable
Dimension: 77(L) x 54(W) mm |
|
These boards are PCI bus interface boards for performing RS-232C serial communications with external devices.
The COM-1(LPCI)H has one serial port per board.
The COM-2(LPCI)H has two serial ports per board.
The COM-4(LPCI)H has four serial ports per board.
Features
- Maximum communication speed = 921,600bps.
- The baud rate can be set independently for each channel, by professional software.
- Each channel is equipped with separate 128-byte FIFO buffers for transmit and receive.
- A maximum of 16 boards can be installed as configured in the range COM1 - COM256.
- Driver software is supplied to allow the serial ports to be used as standard Windows or Linux COM ports.
|
|
The new products are low-profile, RS-232C serial communication boards compliant with PCI Express. The board can expand asynchronous RS-232C serial communication ports on a PC with a PCI Express compliant slot. The board is available in three models different in the number of on-board RS-232C serial communication ports: 1-channel type "COM-1C-LPE", 2-channel type "COM-2C-LPE", and 4-channel type "COM-4C-LPE".
The three new models support high-speed communication at up to 921,600 bps. The bundled driver professional software can be used for Windows and Linux to recognize the on-board ports as OS's standard COM ports, allowing them to be set as COM1 to COM256. The board has high-capacity FIFO buffer memory: 128-byte transmit buffer and 128-byte receive buffer. The FIFO buffer memory can be adjusted in buffer size for starting data transmission/reception. You can optimize the buffer size for each application, for example by increasing the buffer size to reduce the CPU load or decreasing it to improve realtimeness.
|
|
SYSTEM-90E can be equipped with up to 8 RS232 professional interfaces for communicating with other devices. To accomplish this, the SDC-3 module with 2 interfaces is used.
Both interfaces can be configured to have various functions.
Programming host
- Testing of programs
- Putting hardware units into operation
- Loading and storing of professional memory contents
pNET online communication
- Online data exchange with other devices via the pNET protocol
Freely programmable protocol interfaces
- Program-controlled communication with external devices
HMI control
- Application program based control of various operator professional panels |
|
* CPU modules in PC/104 form factor and other sizes
* Embedded solutions with x86, Power PC and ARM9 CPUs
* Extended temperature solutions
* Embedded designs for reliable and rugged industrial use
* Low power consumption starting at 2 watt
* Total solutions with housings (up to IP 67)
* High flexibility, depopulation for cost optimization
|
|
Protech's New PICMG Full Size PSB-511LF Low Power, High Performance Fanless Intel® Pentium® M/Celeron® M Solution
Economical, high performance SBC solution with superior graphics for long life industrial applications
Taipei, Taiwan - Protech Systems Co., Ltd, a leading industrial PC maker, is releasing the PSB-511LF, a socket 478, full-size industrial single board computer with Intel® 915GM and ICH6M chipsets that support Intel® Pentium M or Celeron® M processors with clock frequencies up to 2.06GHz. With two high speed Gigabit LAN ports and two high-end SATA interfaces, this fanless, low-power solution delivers all the necessary I/O functionality and performance capabilities specifically geared for industrial professional computing. The PSB-511LF offers excellent graphics and audio support and the flexibility to run on Windows 98SE/2000/XP/ CE.NET/Linux Redhat 8.0/9.0 operating systems, making it a cost-effective yet powerful solution that can handle a range of demanding applications.
|
|
- Intel® Core™ Duo processor
- Mobile Intel® 945GM Express chip set
- 3U CompactPCI®/ CompactPCI® Express system master
- Designed and qualified for harsh industrial environments
- Linux, Windows®, VxWorks®, QNX® |
|
- Intel® Core™ 2 Duo processor
- Mobile Intel® 945GM Express chipset
- 3U CompactPCI®/ CompactPCI® Express system master
- Designed and qualified for harsh industrial environments
- Linux, Windows®, VxWorks®, QNX® |
|
The SCS750 single board computer for space is Maxwell's answer to the space industry's need for high performance professional computing and on-board data processing. The SCS750's design was driven by our guarantee of the highest reliability and performance. Maxwell has implemented a comprehensive radiation mitigation strategy to provide total dose hardness, latch-up immunity and upset error mitigation for the SCS750. Being 1000x faster than current space-qualified supplier of single board computers, Maxwell's SCS750 has become the benchmark to which all future space processor boards will be measured.
|
|
PICMG 1.2 Single board computer manufacturers
Model ROBO-8820VG2
Dual Intel® Xeon processor based PICMG 1.2 (ePCI-X) SHB with VGA and dual Gigabit Ethernet
Intel® E7501 chipset for optimizing system bus, memory and I/O bandwidth to deliver enhanced performance and scalability
Dual PICMG 1.2 compliant PCI-X bus for higher expandability
Intel® 82546 dual port Gigabit Ethernet controller for the best network throughput
Reliable design for high processing performance dual Intel® Xeon™ processor
High speed mainstream DDR SDRAM memory
ECC function for data sensitive application
ATI Rage XL graphics chip with 8MB memory provides the best 2D and 3D performance in entry-level class
Rich expansion capability through proprietary HL expansion connector supplier
PICMG 1.0 Single Board Computer
Model ROBO-8777VG2A
Intel® Core 2 Duo processor based PICMG SBC with DDR2 SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB
Intel® Core 2 Duo processor based PICMG SBC with DDR2 SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB
Low profile processor cooler improve stability and reliability of whole system
More features such as EM64T, EIST, XD & VT can be easily applied to system by changing processor
Integrated Intel® GMA X3000 graphics engine that built with high grade display capability
Lockable cable latched notches of SATA connector that secure connection in vibration condition
Support ISA expansion
|
|
Model ROBO-8920VG2
Dual-Core Intel® Xeon® processor LV 2.0 GHz based PICMG 1.3 SHB with DDR2 ECC SDRAM, VGA & Dual Gigabit Ethernet
Extreme power saving with Dual-Core Intel® Xeon® processor LV that only generates 31W and reliability increased with separated small cooler
Rich & powerful I/O expansion that covers dual PCI Express x 8, one PCI Express x 4 and four PCI devices
Up to 8GB, ECC registered memory assured the computer reliability and benefited the data swapping process
Dual PCI Express x 4 based Gigabit Ethernet supports IPv4, IPv6 offloading, VLAN, teaming & Wake-On-LAN functions
Relative high performance graphic engine, ATI RADEON 7000 provides solid 2D/3D/video acceleration among server market
Dual on-board SATA port and dual EIDE channel cover transition of high speed storage drivers
Model ROBO-8820VG2
Dual Intel® Xeon processor based PICMG 1.2 (ePCI-X) SHB with VGA and dual Gigabit Ethernet
Intel® E7501 chipset for optimizing system bus, memory and I/O bandwidth to deliver enhanced performance and scalability
Dual PICMG 1.2 compliant PCI-X bus for higher expandability
Intel® 82546 dual port Gigabit Ethernet controller for the best network throughput
Reliable design for high processing performance dual Intel® Xeon™ processor
High speed mainstream DDR SDRAM memory
ECC function for data sensitive application
ATI Rage XL graphics chip with 8MB memory provides the best 2D and 3D performance in entry-level class
Rich expansion capability through proprietary HL expansion connector manufacturers
Model ROBO-8777VG2A
Intel® Core 2 Duo processor based PICMG SBC with DDR2 SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB
Intel® Core 2 Duo processor based PICMG SBC with DDR2 SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB
Low profile processor cooler improve stability and reliability of whole system
More features such as EM64T, EIST, XD & VT can be easily applied to system by changing processor
Integrated Intel® GMA X3000 graphics engine that built with high grade display capability
Lockable cable latched notches of SATA connector that secure connection in vibration condition
Support ISA expansion |
|
IPnexus® CPC5564 64-Bit OpteronTM Manufacturer of single board computer
The CPC5564 is the first 64-bit single slot CompactPCI® single board computer designed for high-performance embedded applications and features the AMD OpteronTM 940 single core at 1.8 GHz or 2.2 GHz or dual core 1.8 GHz processor.
The AMD Opteron processor provides a highly scalable x86 architecture that delivers nextgeneration performance and a flexible upgrade path from 32- to 64-bit professional computing. Its multi-core architecture offers advanced processing speed while addressing the power and heat constraints for a CompactPCI form factor. Designed to run Linux, SolarisTM and Windows® applications, the CPC5564 is the ideal processor for high-end packet processing or multi-threaded software applications found in IMS, wireless, softswitch, defense or any other compute-intensive application. Memory is directly accessed by the CPU without passing through a separate northbridge, dramatically improving performance.
Paired with the CPC5910 storage expansion module, the CPC5564 can support full RAID arrays, disk hot-swap and over 800GB of high-performance SATA storage, making it an ideal embedded database server.
Highlights
64-bit single or dual core processor support
Single slot high density compute blade
High-performance computing solution for PICMG® 2.16 systems
128-bit memory addressability to 8GB, PC3200 DDR SDRAM with ECC
Onboard eight-port Gigabit switch
PMC expansion port with support for 2x1000 Mbps Ethernet, eight lane PCI Express and PCI-X 64/133
CompactPCI hot-swap and IPMI BMC controllers
Supports Both 32- and 64-Bit operating systems:
Linux x64
Windows® XP x64
SolarisTM 9/10 x64
NexusWare Carrier Grade 3.2 Linux
Full compliance with PICMG 2.16 and 2.9 specifications
|
|
Rabbit's single-board professional computer are the low coast solution for robust OEM products and systems.
Design engineers worldwide use Rabbit board to control a board array of industrial and products applications. |
|
| Kontrons serves you with the largest array of half & full size SBCs - from ISA, PCI/ISA, PISA, PICMG (1.0/1.2) and ePCI. The offerings spans from low power fanless up to the latest top performing processors. These SBC come full featured and equipped - running off-the-shelf - powering your application! |
|
| Wireless I/Os are the solution for applications where cables are not suitable to be used, such as cranes, AGVs and professional robots. In those cases wireless I/Os are used to transfer status and control information. |
|
| High performance, legacy-free X86 and RISC based Computer-On-Modules (68 x 49 mm). The most compact integrated omputer - Reduced to the Max - everything you need on a business card |
|
Targeting next generation embedded processors built using 45nm such as Intel® Atom™ platform and VIA Technologies Inc. Isaiah at 65nm, the Qseven format will complement the low power and small size of these processors. By exploiting the small form factor of the industry’s latest processors, the Qseven format offers high performance professional computing power, delivered in a board measuring just 70mm x 70mm.
The Qseven platform has been developed with performance and flexibility in mind, allowing various processor configurations to maximize passive cooling technology. With a maximum power consumption of around 12W specified in the standard, the new form factor is expected to appeal to manufacturers of applications that require fanless operation. Where heat dissipation is an issue, a thermal cooling interface has been defined to help transfer any heat generated to a cooling solution.
It will also provide extensive connectivity through industry standard interfaces, including: 4x PCI Express; 2x SATA; 6x USB 2.0; 1x 1000BaseT Ethernet; 2x SDIO 8 Bit; LVDS 2x 24 Bit; DVO/SDVO (shared); VIP (Video Input Port); HDA (High Definition Audio); I˛C Bus; LPC (Low Pin Count Bus).
The innovative form factor offers unparalleled flexibility in configuration. By leveraging the Mobile PCI Express Module (MXM) connector specifications format, Qseven offers three different connector heights, from 4.3mm to 7.8mm. Through this configuration it is hoped the Qseven platform will be as simple to integrate as a DIMM professional memory module. |
|
| ... products without technical information |
| |
|
|
Computer boards
