|
|
This board is an interface board of PCI bus conformity which inputs a digital signal.
The opening-and-closing state of a switch can be inputted.
A maximum of 128 input can be performed on board.
"Attached API function library [API-PAC(W32)] The application software for Windows can be created by the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C++, by using it. |
|
The new products are low-profile, RS-232C serial communication boards compliant with PCI Express. The board can expand asynchronous RS-232C serial communication ports on a PC with a PCI Express compliant slot. The board is available in three models different in the number of on-board RS-232C serial communication ports: 1-channel type "COM-1C-LPE", 2-channel type "COM-2C-LPE", and 4-channel type "COM-4C-LPE".
The three new models support high-speed communication at up to 921,600 bps. The bundled driver software can be used for Windows and Linux to recognize the on-board ports as OS's standard COM ports, allowing them to be set as COM1 to COM256. The board has high-capacity FIFO buffer memory: 128-byte transmit buffer and 128-byte receive buffer. The FIFO buffer memory can be adjusted in buffer size for starting data transmission/reception. You can optimize the buffer size for each application, for example by increasing the buffer size to reduce the CPU load or decreasing it to improve realtimeness.
|
|
This product is the interface board of the PCI bus conformity which I/O digital signal.
Digital signal of 12-24VDC can be outputted and inputted.
Input of a maximum of 32 points and output of a maximum of 32 points can be performed in onAttached API function library [API-PAC(W32)] The application software for Windows can be created by the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C , by using it.
Features:
In order for 16-point unit to carry out common composition, it can common every respond to a different external power metering.
Since the PCI bus (personal computer) and the I/O interface are insulated by the photo-coupler, it excels in noise-proof nature.
32 points of an input signal can be used as an interruption input.
Moreover, the edge of the input signal which generates interruption can also be chosen.
It has the digital filter function for preventing the incorrect input by the noise or the chattering.
The rating of an output signal is a maximum of 35VDC and 100mA per point.
Zener rectifier is connected to the output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector specification pin compatibles.
|
|
With the PCI board APCI-3701 from Addi-Data the user can acquire up to 16 inductive displacement transducers of the type LVDT or Half-Bridge directly with a precision of
0.1 µm according to the transducer type. Now the board is also available as 1-channel version, and is delivered with the calibration and update tool SET3701. The new unique calibration tool SET3701 is divided in two parts: In the first one, the administration area, boards and transducers are selected and in the second one, the calibration part, the transducers have micro-calibration. In the administration part the installed boards of the type APCI-3701 are recognised automatically. In the board firmware 14 common transducers with all parameters are already available. The user also can select pre-calibrated transducers or just add customer-specific transducers. The assistant, with integrated help-file, supports the user step by step. After the calibration a board test is possible: For each channel a window with a graphic opens, which reflects all acquired data. The standard delivery also includes programming samples for LabView, Delphi, C, VB, etc. |
|
AdvancedTCA (ATCA) is the new standard for telecom applications bringing the features of proprietary architectures and the CompactPCI standard with his high packing density and RAS (reliability, availability, serviceability) together.
|
|
These new boards are compatible with L Series PCI board products and feature high-precision 16 bit analog input and output, digital I/O and a industrial counter function. Other than their bus interface, these new boards share the same specifications as existing L series PCI products allowing applications to be easily transferred through hardware setting changes. External pin assignment and connectors manufacturers are also the same allowing the user to use existing cabling.
|
|
PICMG 1.3@Industrial motherboard
Model PBPE-06V
Vertrical 6-slot [PCI-E x1 (4),PCI-E x16 (1)]PICMG 1.3 Backplane
Fit for 2U chassis
Four USB ports
Dual SATA port
24-pin ESP12V power connector suppliers
Model PBPE-14AD64
14-slot [PCI-E x4 (1), PCI-E x8 (1), PCI-X (8),PCI (3)] PICMG 1.3 Backplane
Fit for 4U chassis
Dedicated to ROBO-8920VG2
Four PCI-X buses support eight PCI-X expansion slots
ModelPBPE-19AG64
19-slot [PCI-E x8 (1), PCI-E x4 (1),PCI-X (16)]
Fit for 4U up chassis
Dedicated to ROBO-8920VG2
Four PCI-X buses support 16 PCI-X expansion slots
PICMG 1.2@Industrial Backplane
Model PBP-14PD64
14-slot (4xPCI-X) 64-bit PICMG 1.2 backplane
PICMG 1.2
Four PCI-X buses
1 SHB, 2 PCI-X, 3 PCI-X, 3 PCI-X and 4 PCI-X
Fit for 4U chassis
283(L) x 317(W) mm;11.14"(L) x 12.48"(W)
Model PBP-06V564
Vertical 6-slot (2xPCI-X, 3xPCI) 64-bit PICMG 1.2 backplane
Fit for 2U chassis
ATX power connector support
321.94(L) x 83(W) mm;12.67"(L) x 3.27"(W)
ModelPBP-06P564
6-slot (2xPCI-X, 3xPCI) 64-bit PICMG 1.2 backplane
Fit for 6-slot node chassis
ATX and aux power connectors support
310(L) x 140.2(W) mm;12.2"(L) x 5.52"(W)
PICMG 1.0@Industrial Backplane
Model ACTI-14P4
14-slot (4xPCI) Active PICMG Backplane
2.4 mm PCB thickness
ATX power connector support
Fit for 14-slot chassis
317(L) x 257(W) mm;12.48"(L) x 10.12"(W)
Model PBP-19AI
19-slot (18xPCI) active PICMG backplane
Suitable for advanced CTI application
ATX power connector support
415.4(L) x 265.2(W) mm;16.35"(L) x 10.44"(W)
Model PBP-19P4
19-slot (4xPCI) PICMG Backplane
Fit for any 20-slot chassis
ATX power connector support
Sufficient ISA slots for CTI application
415.4(L) x 265.2(W) mm;16.35"(L) x 10.44"(W)
Model PBP-02V1X
Vertical 2-slot (1xPCI) PICMG backplane
Fit for 1U chassis
ATX power connector support
327.9(L) x 33.7(W) mm;12.91"(L) x 1.33"(W) |
|
- 6U CompactPCI system slot board, up to 64 Bit/66MHz, PCI-X
- Pentium M up to 2GHz or Celeron M, 1GHz
- Cyclone FPGA for customized computer I/O
- 2 GB DDR2 ECC SDRAM soldered against shock and vibration
- Windows®, Linux, VxWorks®, QNX |
|
IPnexus® CPC5900 High-Performance IP Storage Blade
The CPC5900 is designed for embedded storage applications. NAS applications such as file serving, data caching and shared storage can be provided by NFS or SAMBA services. Database applications are supported via iSCSI for block-level storage access. With its onboard PowerPC processor, the CPC5900 can also be used as an application server where disk intensive services are required, allowing payload blades in the platform to operate without a locally attached hard drive, increasing system reliability and capabilities.
The CPC5900 is a high-performance, high availability NAS or SAN storage blade solution for CompactPCI®, PICMG® 2.16 systems supporting 800GB of storage. Each storage blade features two 3.5" enterprise-class SATA hard drives with board-level hot-swap and drive-level hot-swap for complete flexibility, high reliability and high storage capacity. The onboard high-performance PowerPC® processor operates on Performance Technologies' NexusWare® CGL 3.2 registered/ POSIX compliant Linux development environment. Block Disk I/O is supported over iSCSI for SAN applications and FIle I/O is supported using NFS and SAMBA for NAS applications. Network connectivity is provided by dual Gigabit network ports connected to the PICMG 2.16 Ethernet port on the backplane.
Highlights
High-Density 6U x 2-Slot CompactPCI® Form Factor
800GB capacity
Supports RAID 0/1/0+1/4/5/6
Board-Level & Disk-Level Hot-Swap
Headless Operation for Drive Removal and Insertion
Block Disk I/O over iSCSI
File I/O over NFS and SAMBA
PICMG® 2.16 Compatible
Dual 10/100/1000 Ethernet Ports Routed to the Mid-Plane
AMCC® High Performance PowerPC® Processor
Dual Enterprise-Class 3.5" SATA Hard Disk Drives
Additional drives may be added to rear panel board
PICMG 2.9 compatible with onboard IPMC
|
|
CIERRE produces traditional cards and SMT of Civil and Industrial type.
Assembly SMT comes executed with automatic lines with ability until 30.000 members now.
|
|
Robust, reliable solutions for communicating with industrial devices
Industrial ethernet controllers for GPIB and serial instruments and distributed I/O devices
PC plug-in interfaces for Controller Area Network (CAN bus), DeviceNet, and FOUNDATION Fieldbus
For PC plug-in serial interfaces, see Instrument Control and Connectivity
Just as in lab and test environments, industrial applications require PCs and reliable, robust, and easy-to-use hardware and software tools. These tools must communicate with devices such as process instrumentation, Plcs, single-loop controllers, and I/O and data acquisition devices. National Instruments offers hardware and driver software products for communication with industrial devices using Ethernet, Controller Area Network (CAN), DeviceNet, and FOUNDATION Fieldbus.
|
|
Enterprise
Model NAR-7080
2U communication appliance rack-mount server with redundant PSU and flexible Ethernet modules
Dual Intel® Nocona CPU with 1/2M L2 cache/ 800MHz FSB
Flexible removable Ethernet modules
Up to Twelve Gigabit Ethernet ports
Optional crypto PMC card
Four DDR400/DDRII memory slots
Up to two PCI-X expansion slots
Redundant 460W ATX PSU
Front access for user-friendly maintenance
Optional crypto solution
Bypass option
Small to Medium Business
Model NAR-5620
1U communication appliance rack-mount server with 2 PCI-E I/O modules and PCI-X expansion slot
Removable PCI-E Ethernet modules for flexible application request and easy maintenance
Supports Intel® Core Duo and Core 2 Duo CPU up to 2.33GHz
Supports FSB 667 MHz
Support DDR2 ECC RAM up to 4GB
Up to Eight Gigabit Ethernet ports
Support up to 4 bypass segments
Dual Personality for flexible use of Fiber-optical or copper interface
One real accessible PCI-X expansion slot
SOHO/ROBO
Model NAD-2070
Fanless Desktop Communication apliance platform with up to five Ethernet ports
Cost-effective fanless solution
Upgradeable to VIA V4 Eden 1.2GHz CPU performance
Support max to five Ethernet ports
256MB memory and SODIMM socket on board
Support Compact Flash and Disk on Module (DOM)
Optional bypass function for project base application
OS: support most updated Linux
Power adapter solution |
|
| Complete line of 3U and 6U cPCI chassis and CPU blades along with a diverse line of plug in boards such as industrial I/O and communications, graphics, drive control, cPCI PMC carrier, ethernet and fieldbus. |
|
- 6U, 64-bit/66-MHz, system-slot or peripheral-slot or stand-alone
- PowerPC MPC8540 or MPC8560, 800 MHz and higher
- Cyclone FPGA for tailor-made computer I/O
- SODIMM socket up to 2 GB DDR SDRAM, optional with ECC
- Linux, VxWorks, QNX |
|
Products:
- CICP
- CSER8
- CLAN7
- Piggy-Backs
- LAN5 (service until 2014)
|
|
Products:
- CCIO32
- CDI32
- CMIO36
- CADO
- CINK
|
|
Products:
- CPU7.2
- CPU7.1 (service until 2010)
- CPU6
- CPU1.2
- CPU520
|
|
| Backplanes in various industry-standard architectures and custom design services. Signal integrity services are also available. |
|
VMEbus
- Conforming with VITA 1-1994
- J1, J2 and J1/J2 backplane
- Manual or automatic daisy chain
VME64 Extension
- Conforming with VITA 1-1994 VME standards, VITA 1.1-1997 VME64 Extension standards, VITA 38 System Management for VME
- Termination, passive
- Electronic automatic daisy chain (EDC)
- Outstanding high-frequency noise suppression and very high MTBF due to ceramic capacitors
CompactPCI bus
- For durable industrial application
- CompactPCI is an adaptation of the Peripheral Component Interconnect (PCI) specification, version 2.1
- Power supply suppliers selectable with screw connections, ATX-PSU-connector suppliers, connector type M
- Clock signal less running times with optimum skew
ATCA Backplane
- Conformity with PICMG 3.0 ATCA Core Specification (ATCA= Advanced Telecom Computing Architecture)
- Full Mesh and Dual Star Topology
- 4 Ports per Link
- Slots for 2 redundancy Shelf Management Controller
- Connector for fan unit integrated
|
|
| Highly integrated, PC-compatible embedded modules based on advanced X86 CPUs (95 x 114 mm) Full featured Multimedia PC from STPC to Pentium M on 95x114mm - the standard for custom desings |
|
The M671 is a new ETX CPU module designed by SECO, paying attention to customers requiring very high performances.
The module is based on the Pentium® M CPU up to 1.8 GHz frequency, with Chipset Intel® 855GME (Intel® 852GME on the CM 600 MHz version) and front side bus at 400 MHz. The chipset has an integrated 2D/3D graphic controller, supporting AGP4x interface.
An important feature in this module is the LVDS interface at 18bit Single and Dual Channel.
The module integrates also Audio, Ultra-ATA/100 IDE interface, 1 Ethernet 10/100 BaseT, 4 USB 2.0 ports, 2 Full modem serial ports, 1 standard parallel, keyboard/mouse controllers, Real Time Clock and Watch Dog Timer.
The ETX module is connected to the rest of the embedded system through 4 high density connectors specifications that carry both ISA and PCI bus signals to a motherboard, where I/O connectors are placed, according to the customer requirements. |
|
| Cambridge Technologys EC1000 is the next generation in galvo-steered laser control systems. This compact, fully integrated dual system-on-a-chip (SoC) control system is ideal for deployment into modern factory environments with distributed automation. In this environment, a single host computer can supervise a factory of networked laser marking appliances. The EC1000 is designed to be completely embedded into a scanning head and does not require a nearby physical host computer for operation. Remote Access, Remote Control, and Remote Monitoring are fully supported for tetherless operation in a distributed laser marking environment. Factory reliability and EMI immunity are ensured through the use of optically isolated digital control ports. |
|
The new SLC-8550-LVA is the 5-inch bay sized (203mm×145mm) CPU board and is a lead-free and RoHS-compliant product. This CPU board supports the Intel 855GME + ICH4 chipset and is compatible with 1.6G-2.0GHz (FSB400MHz) Intel Pentium M processor and 1.3G-1.5GHz (FSB400MHz) Intel Celeron M processor. The main memory complies with PC2700 DDR SDRAM (supports both ECC and non-ECC memory) and is able to contain up to 1 GB.
The SLC-8550-LVA provides the expansion capability including six 232C serial communication ports (two of them are pin header connector), six USB 2.0 ports, CF slot (enables boot-up), AC97 audio and PCI slot, making it ideal for complicated embedded applications. LVDS interface and analog RGA enables the dual independent displays. CONTEC strives to customize contained devices and BIOS of the new SLC-8550-LVA as its custom ordered (OEM) product.
|
|
PICMG 1.0 CPU Board
PICMG 1.3 CPU Board
PCISA CPU Board
PICO/PICOe CPU Board
ISA CPU Board
5" 1/4 CPU Board
Embedded CPU Board
ETX CPU Board
ATX CPU Board
Mini ITX CPU Board
PIAGP CPU Board
|
|
Large array of PICMG PCI/ISA rack chassis, benchtop and HMI/MMI industrial workstations along with a diverse line of SBC, motherboards, & plug in boards such as industrial I/O and communications, video, drive control, sound, modems, ethernet & telephony.
|
|
|
|
Computer boards
