|
|
ispLEVER
Supports all current Lattice FPGA families. Tools for all design tasks, project management, IP integration, design planning, place and route, in-system logic analysis, and more. |
|
TD Evaluation Board allows you to test & validate Telecom Design range (form factors as Socket Modems TM, JST Modules)
- in 3.3V or 5V
- Equipped with serial port (DB9), power dispensing, Line connectors suppliers for PSTN, ISDN or LAN. |
|
modEva-Board MTCS-ME1
Application board for True Colour Detection
As a supplement to its colour sensors, MAZeT offers a MTCS-ME1 hardware solution, based on the MTCS product line. A modularly structured evaluation board, it is intended for colour detection and colour measurement according to the standard tri-stimulus function under DIN5033. It consists of one mainboard which can be configured with one sensor plug-in module, optics and software as required to match the particular application.
MTCS-ME1 mainboard
- µC-controlled signal collection
- digitization with 12-bit resolution
- free memory space for balancing and correction data
- interrupt and IO pin terminals for integration into control processes
- voltage supplied via USB (for RS232 and I²C: separate terminal option)
- programmable voltage source for operation control of target illumination sources
- prefabricated configuration versions for interfaces (USB, I²C, RS232) and plug-in modules |
|
ARM RealView tools are unique in their ability to provide solutions that span the complete development process from concept to final product deployment. Each member of the RealView portfolio has been developed closely alongside the ARM hardware and professional software IP, ensuring that it maximizes the IP's performance.
Working with ARM RealView tools gives the user an extensive and cohesive product range that empowers architects and developers alike to confidently deliver optimal products into the marketplace faster than ever before.
RealView system development tools allow system architects to create and validate their hardware design ideas in a virtual environment. Processor design engineers will find the RealView system development tools vital for creating detailed processor models and the tools required to generate and debug code on them. System architects can create executable specifications of a design, run benchmarks and simulate different architectures very early in the design cycle. RealView system development tools give you confidence in your final product much earlier in the design cycle, therefore lowering risk and increasing delivery of products that are right first time. |
|
| Lattice's produces a range of hardware tools to help you evaluate, design and program Lattice FPGA, CPLD, and mixed-signal programmable products. |
|
The main functions of the new ADEUNIS RF wireless Demokits include evaluating ADEUNIS RF products, measuring RF and developing a prototype.
* Immediate connection to a PC serial port, permitting in particular, simple and rapid configuration of the radio module with the parameters required by the application.
* Implement measurements of sensitivity, power and all RF parameters.
* All the DemoKits have chip areas as well as direct access to all the radio module's signals permitting easy addition of additional electronics.
* configuration using AT commands
These Demokits are available for the following products:
* UART TTL wireless modules - ARF34 / ARF44 / ARF54
European and American versions
Short (300m) - Medium (1500m) - Long (6000m) distances
* Bluetooth® class1 & Class2 modules - ARF32 / ARF52
Bluetooth® certified "end user" solution
Conforms in full to Bluetooth® V2.0 standard
Data or Audio version
* Industrial remote controls - ARF18
Mono or bidirectional versions
1 to 24 logic states
Technology risks can be limited and "time to market" optimised, and at very competitive prices - thanks to its ease of implementation and configuration, even for those who are not specialised in RF, using AT commands.
Demokit available from 99 Euros.
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
VM-1 Starter Kits:
We want you to try out our approach to fast turn-around, embedded development so we are offering two full-feature VM-1 starter kits at special introductory prices, starting from £250. The starter kits provide everything you will need to start creating your own VM-1 application. |
|
The Tensilica XPRES (Xtensa PRocessor Extension Synthesis) Professional compiler is a powerful TIE language synthesis tool that creates tailored Xtensa professional processors from native C/C+ code.
You can use the XPRES Compiler, coupled with Tensilica's proven Xtensa Processor Industrial generator technology, to generate highly optimized processor hardware RTL directly from the C/C reference code or algorithmic specifications, eliminating the need to have an intimate knowledge of TIE.
|
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 professional transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins manufacturers of connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available: |
|
| PMD's motion control Developer's Kits are integrated board and software packages available to designers who need to do electro-mechanical and software design using PMD's motion processors. These motion control developer's kits include the surface mount card, interconnection cables, a full set of manuals, and a CD-ROM containing PMD's powerful Pro-Motion GUI and C-Motion to simplify development. |
|
Jennic's IEEE802.15.4 evaluation kit provides a complete environment for the rapid development of wireless sensor network applications based on the JN5139 wireless microcontroller. All the hardware and software required for product development is included, with five network nodes, an unrestricted software development kit, test environment and support applications. Multiple industrial wireless networks including point-to-point, star, and mesh types can be supported.
A demonstrator of a home automation system is included that professional monitors data from remote sensors and professional displays the results onto the controller's LCD display, while commands sent between the nodes activate control signals. This is provided as an example to be directly used as the basis for many product developments.
The test environment supplied includes Daintree Networks' Sensor Network Analyser that demonstrates advanced wireless sensor network data capture and monitoring. A basic packet sniffer and network test application also aids program development.
|
|
Universal Evaluation Kit
For Single Frequency FM Wireless modules
This Evaluation Kit can be used to evaluate single frequency Radiometrix VHF/UHF professional transmitter, professional receiver and professional transceiver modules. Led monitors are provided to show system status and to facilitate range testing and site surveys. The board is controlled by the Eval-RPC chip and incorporates several useful diagnostics & debug modes. Link-selectable 9.6kbps or 64kbps data rate.
Features
- Range Testing
- Target Environment Testing
- Noise and Interference Professional identification
- Professional antenna Evaluation
- TX1(H)/HX1/RX1, NTX2/NRX2, TX2(A)/TX2H/RX2(A), TX3A/RX3A, BiM1T/
BiM1R, CVR1, BiM/1/2/3A and NiM2 hardware test
- Transient Analysis
- Communication Eye Diagrm
- Analogue and digital professional data transmission
- Received Signal Strength Indicator (RSSI) meter
- Linking external hardware directly or via on board Eval RPC
- Responses up to 9.6kbps (A) or 64kbps (F)
|
|
Overview
Y-Lynx provides a complete development environment to facilitate the integration of a radio frequency communication into your application. The Y-Lynx's Professional starter kit enables the demonstration of two way communication between two Radio boards, practical ''demonstration'', ''range'' and ''site survey'' testing.
The Interface board provided can be use with a standard PC interface (RS232 or USB) to operate the radio modems and to help in the system integration.
Kit Contents
• 2 x Industrial radio modem
• 2 x Interface Boards
• 2 x Half wave dipole professional antennas
• 2 x AC Power adapters
• 2 x USB Serial Cables
• 1 x CD with Test/Configuration utility software, user’s manual and documentation |
|
| picoChip's picoTools is a fully-integrated development environment for the picoArray which includes symbolic debugger, breakpointing with single-step operation, graphical views of design data, simulator and a powerful monitoring and display environment for in-system testing. picoChip also supply a Library of Example Designs and a range of Development platforms. |
|
ROM emulation is a powerful and versatile method of microprocessor testing. ROM emulation has emerged as the technique of choice for microprocessor test and diagnostic applications. A microprocessor-based board is tested by replacing the professional boot ROMs on the Unit Under Test (UUT) with memory emulation pods. Each pod handles eight bits of the data bus. Processors from 8 to 32 bits can be controlled with one to four pods (even the most advanced CPUs such as the Intel Pentium generally use only an eight-bit boot path). The professional emulator takes control of the UUT by resetting the processor and, under the test program's control (monitor program), exercises all functions on the board. Synchronization with the UUT is automatic and requires no additional hardware or connections.
|
|
Your electrical diagrams in the blink of an eye
Equipped with functionalities which are simple and adapted to your trade, SEE2000 enables you to create schematic diagrams (single-wire or multi-wire), the front views of panels, the installation of apparatus on building plans and to generate the associated parts lists.
It is a fully rounded professional software which allows for the automation of tiresome tasks, like wire numbering, cross references and parts lists.
SEE 2000 enables you to increase your productivity while standardizing your working methods. |
|
Engineering Base - A new approach
Engineering Base is the new and innovative professional design software for the electrical engineering community. Creating electrical design documentation with Engineering Base is faster and easier than ever. Engineering Base combines Microsoft Office Visio, with Microsoft SQL Server, the powerful enterprise relational database management and analysis system. Electrical diagrams are drawn with Visio and all data is managed with the SQL Server.
The typical situation in electrical design
In order to manage your engineering project, you need to work with different sets of tools. This tool set consists of text processing, a electrical CAD tool to create system documentation, and either spreadsheets or a small database application to handle bills of materials, wiring lists, and purchase order lists. The amount of data produced can easily create large numbers of files of many differing types. Plus, all references to items located in these different files have to be updated manually. Keeping track of all this information can be cumbersome, to say the least. Relatively few employees have the skill, the time, and a license to use a CAD system. And only a few know how CAD files, spread sheets, and text documents are truly related in this situation. |
|
Primero™ Development Kit
The Development Kit is intended to allow the user to activate, program and simulate applications using the Aveso Primero 6|7™ Display Module. The Development Kit may be used to demonstrate the display module at the push of a button using Aveso-supplied demonstration firmware. The tool also supports programming of user-specific firmware. User-specific firmware may be loaded to the embedded microprocessor via JTAG or SPI interface.
Product Features:
• Supports custom firmware development and testing
• Multiple programming functions
• Simple demonstration capabilities
• External connection point for additional diagnostics
• Powered via coin cell battery or AC power adapter
• Compact and portable
Included in Development Kit:
• Development Kit hardware unit
• Three (3) Primero 6|7 numeric display modules
• Full hardware and software documentation
• Texas Instruments' MSP430™ emulation tool
• AC external power adapter
• Protective packaging |
|
| ... products without technical information |
| |
|
|
Hardware and software tools for electronics development
