|
|
| The single-channel 100 kHz FFT spectrum analyzers with a dynamic range of 90 dB and a real-time bandwidth of 100 kHz. Additionally, the SR770 includes a low-distortion source which allows you to measure the transfer functions of electronic and mechanical systems. The speed and dynamic range of these instruments, coupled with their flexibility and many analysis modes, makes them the ideal choice for a variety of applications including acoustics, vibration, noise measurement and general electronic use. |
|
The FCR-7xx200-2 is a standard reflection probe to get spectral information of diffuse or directly reflecting or back-scattering materials.
Via a standard SMA905 connector light from a light source is coupled into a fiber bundle, consisting of 6 fibers and carried to the probe end. The surface will selectively reflect light back into a 7th fiber. This fiber transfers the data to the output SMA905 connector, which can be coupled to a spectrometer or spectrum analyzer.
A higher number of fibers are possible to couple more energy from the light source and to increase the signal level.
For measurements under 90º the FCR-90-Option, a special adapter with a mirror under 45º, was developed, which can be easily mounted on the tip of the reflection probe.
The FCR-COL is available to focus the measurement spot on an extended distance.
|
|
# The model 1856D provides versatility and reliability for a broad spectrum of laboratory and service applications. RS232 Interface
# Wide measuring range up to 3.5GHz
# Bright nine digit LED display
# Period mode for accurate low frequency measurement
# Totalize mode permits counting of individual events
# Accurate TCXO time base |
|
Agilent frequency counters perform a wide variety of time and frequency measurements at speeds up to 200 measurements per second via GPIB.
10 and 12 digits/s frequency measurements
500 ps and 150 ps timing resolution
Optional: 3 GHz, 5 GHz, or 12.4 GHz RF input
Optional: medium, high and ultra-high stability timebase
Free IntuiLink Software
|
|
Model#4011A
MSRP $315.00 0.5 Hz to 5 MHz
Sine, Square, Triangle, Pulse, & Ramp output
Coarse and Fine tuning
4 digit LED display
Variable duty cycle
Variable DC offset
Variable amplitude output plus 20dB attenuator
20Vpp output into open circuit (10Vpp into 50 Ohms)
|
|
Agilent function generator / arbitrary waveform generators give you 10 standard waveforms plus the ability to create arbitrary waveforms.
15, 20, 80 or 500 MHz bandwidth
1.25 GSa/s sample clock (N6030A)
Pulse generation with variable edge time (33220A, 33250A)
DDS technology
12, 14, 15-bit resolution
Built-in modulation capabilities
Free IntuiLink connectivity software
|
|
The GP1616H function generator is a programmable instrument capable of generating predefined Sine, Square, Triangle, Ramp, Haversine, Haver triangle and Pulse waveforms as well as a programmable DC output. The firmware is customized to be fully compatible with the Hewlett Packard 8116A GPIB command set. Software test procedures using the original HP8116A instrument require no code modification when upgrading to the GP1616H.
|
|
The FG2C and FG3C Meterman function generators allow wide ranging versatility at an affordable price. These bench instruments are used in depot services, design engineering, production or QC benches, school labs, and more.
These two function generators provide a substantial array of output capabilities. They are extremely reliable for heavy day-to-day usage in electronic troubleshooting, production manufacturing test or as a breadboarding signal source. |
|
Function Generator ( MODEL: FG15)
New FG15, 15MHz Function Generator can generator extremely clean and low
distortion waveform output . It comes with 90MHz TTL output , optional 2GHz
frequency counter etc . The unique design is to make the rotary menu driven
pop up and down functions for easy operation . Please refer to how pure the
waveform is as the attached files.
5MHz Function Generator ( MODEL: FG 52)
0.05Hz ~ 5MHz Function Generator
Linear/Log Sweep Function
Duty Cycle Control
Invert Function
Auto Range Auto Gatetime Counter
0.001Hz Counter Resolution
MODEL: FG 32 (6 Functions, 6 Ranges with counter)
1. Six waveform functions - Sine, Triangle, Square, Ramp +/- Pulse.
2. Frequency Range 0.5Hz ~ 3MHz
3. 5 digit autorange counter LED display
4. Internal/External counter function.
5. Linear/Log sweep. Sweep rate 10mS ~ 5S.
6. External counter trigger level control.
7. VCF input 0 ~ +/- 10V Voltrage control frequency to 1000:
8. Amplitude : 20V p-p (open);10V p-p (50 Ohm load). |
|
| The Gated Integrators/ Boxcar Averager System is a modular instrumentation platform designed to acquire and analyze fast analog signals. The system consists of a NIM compatible mainframe and modules which can be selected to tailor a system to individual requirements. The SR200 series is flexible enough to handle gate widths from 100 ps to 150 µs, repetition rates up to 50 kHz, and has both analog and digital outputs. With its low-noise inputs and low-drift outputs, the SR200 series is the standard for gated integrators and boxcar averagers. |
|
# The 2650 are high-performance spectrum analyzers providing excellent performance and functions perfect for many different applications. It is a compact, lightweight and inexpensive unit that is ideal for testing W-CDMA, CDMA, GSM, PDC, PHS, Wireless LAN and Bluetooth systems. There are many accessories available for the 2650 and some of them may be necessary for your application, so please view the available accessories before ordering. Included accessories are BC 2650, LC 2650, BP 2650, accessory pouch, fuse and instruction manual. Features: Channel power measurement
# Adjacent channel power measurement
# Occupied bandwidth measurement
# Electric field strength measurement (with optional dipole antennas)
# Magnetic field strength measurement (with optional PR 26M)
# Min/Max hold
# Average and over write mode
# Marker measurement
# Switchable 50 or 75 ohm input impedance
# Peak search
# Auto tuning
# Auto range
# Save/Load
# Hard copy of display (with optional PT 2650) |
|
# The 2658 is a small, lightweight handheld spectrum analyzer designed to analyze the “new wave” of wireless signals, including GPS, 802.11a, 3G, ultra-wideband, and WiMAX. It was designed to be a high-performance spectrum analyzer providing excellent performance and function for many different applications. It is a compact, lightweight and inexpensive unit that is ideal for testing many “high frequency” applications. There are many accessories available for the 2658 and some of them may be necessary for your application, so please view the available accessories before ordering. Included accessories are BC 2650, LC 2650, BP 2650, accessory pouch, fuse and instruction manual. Features: Channel power measurement
# Adjacent channel power measurement
# Occupied bandwidth measurement
# Electric field strength measurement (with optional dipole antennas)
# Magnetic field strength measurement (with optional PR 26M)
# Min/Max hold
# Average and over write mode
# Marker measurement
# Switchable 50 or 75 ohm input impedance
# Peak search
# Auto tuning
# Auto range
# Save/Load
# Hard copy of display (with optional PT 2650 |
|
EDU5 series is an excellent choice of replacement for traditional analogue oscilloscope. Thanks to our R&D team and outstanding quality&cost control of manufactures, our customer can have DSO with on a very compititive price.
EDU DSO uses STN LCD screen with a compact design, 20MHz to 40MHz bandwidths are available with real sampling rate of 100Ms/S.This series is ideal for assembly line and educational use in Schools, Collages as well as Universities.
Model EDU5022
Display 7.8"STN LCD
Bandwidth 25 MHz
Channels Dual
External trigger Inputs available on all series
Real-time sampling rate 100MS/s
Record length 6K points per channel
Vertical Resolution 8-bits
Vertical sensitivity 5mV-5V/div
DC Vertical Accuracy +/-5%
Max Input Voltage 300V CAT II
Position Range +/-50V(500mV-5V),+/-2V(5mV-200mV)
Input Coupling AC,AD
Input Impedance 1M¿+/-2% in parallel with 20p+/-3 pF
Time base range 5ns-5s/div
Time Base Accuracy 100ppm
Trigger modes Auto, Free Run, Single shot, Edge, Video
Power 100-240 VACRMSC50HzCCAT II
Dimention 350mmX157mmX120mm
Weight 1kg |
|
| The widest bandwidth lock-in amplifier available. It provides uncompromised performance with a frequency range of 25 kHz to 200 MHz and up to 80 dB of drift-free dynamic reserve. The SR844 includes the many features, ease of operation, and programmability that you've come to expect from SRS DSP lock-in amplifiers |
|
Description
An Agilent logic analyzer helps you minimize project risk by providing the most reliable, accurate measurements and the most complete view of system behavior. A comprehensive family of products offers the measurement capabilities, probing, application support and analysis tools to meet your toughest digital debug needs.
·16900 Series modular logic analysis systems deliver the best long-term value. You get the flexibility to configure a system the way you want. Purchase what you need now then upgrade as your needs evolve.
·16800 Series portable logic analyzers offer you an exclusive combination of high-performance logic analysis and pattern generation in a fixed configuration at an affordable price. State speed and memory depth are upgradeable at time of purchase or later as your needs evolve.
·1690 Series PC-hosted logic analyzers provide a low-cost, compact solution. |
|
QT1100 can functionally test any device working at 5V in in-circuit as well as out-circuit using library defined test patterns. The Visual WorkStation (VWS) mode allows interactive testing of individual devices, as well as wholeboard test. The Device Under Test (DUT) is tested under actual in-circuit conditions, that are available on the board. QT1100 uses the back-driving or node-forcing technique to functionally test devices in-circuit. The back-driving current is limited to 220 mA and back-driving time is limited to 65 m.secs. to comply with the International Defence Standards 00-53/1.
1. In-Circuit Digital Functional Testing
2. Auto compensation with Qmax Simulator
3. Board Learn & Board Test Modes
4. QSM VI – an advanced tool for failure analysis
5. Auto Guarding
6. Logic Analyser
7. Circuit Tracing
8. Developing New Device Program
9. Short Locator
10. RCV Measurement & Oscilloscope
|
|
| The performance of a low distortion analog source and the precision of direct digital synthesis (DDS) is combined in the DS360. With less than 0.001 % total harmonic distortion (THD), 25 ppm frequency accuracy, and a broad range of features including sweeps and bursts, the DS360 is the ideal source for audio frequency applications. |
|
| Many measurement tasks in the field of industrial test benches and automatic production/assembly processes can be solved very simply and reliably with HBM industrial measurement amplifiers. Force, pressure, displacement and torque transducers based on different technologies can be connected to these analog and digital amplifiers. |
|
interface technology
The TURCK interface product portfolio comprises a large variety of devices for isolation, conversion, processing and conditioning of analogue signals.
The housing designs comply with industrial standards:
series interface module (IM) in modular housings
series multimodul (MK) in modular housings
series multisafe® (MS) in modular housings
series multicart® (MC) on 19’’ card
Interfacemodule Cartridge (IMC) series for the IP67 area
|
|
| The measuring amplifier with comparator outputs works as a DC amplifier for DMS measuring bridges. Three downstream comparators having one adjusting potentiometer each allow for the setting of three different switching thresholds that correspond to a certain load of connected DMS force transducer. Each comparator output controls one relay and one indicator LED. |
|
Giga-tronics offers two series of standard synthesizer modules covering 2 to 24 GHz. These synthesizers are YIG oscillator based having low phase noise and spurious in compact modules.
The wideband, low noise synthesizer module series, SNY-510, covers the 2 to 10 GHz frequency range with modules having octave plus operating frequency bandwidths. This series is designed to provide reliable and cost effective performance where the key parameters are size, phase noise and bandwidth coverage. Mechanically this series was designed to fit into a single PXI or VXI chassis. |
|
Synchronization products is our newest and fastest growing product group. It includes two Wandermeters for troubleshooting and certification of the synchronization clock in transport networks, and WM-11 comes with an Ethernet Interface as standard! Wander is the slow phase drift of the clock, and the major cause for synchronization problems. The SSU-32 is a modular system for synchronization of SDH, PDH, ATM and Mobile Digital Communication networks. The synchronization supply package also includes the Sync Clock Distribution Unit SDU-33 and the remote monitoring SW LYNX. Both the Wandermeter and the SSU-products were specified by, and developed in close cooperation with, Sweden's leading telecom network providers.
|
|
| The SQ 0214 is a microprocessor-based synchronising unit. It is intended for a phase difference measurement between a bus bar and generator. It can be used in any kind of installation where a manual or semi-automatic synchronising is required. Circular set of 24 LEDs represents a phase difference. SQ 0214 has LCD backlight display for a display of a generator UGEN and bus-bar UBB voltage and both frequencies fGEN and fBB or D j . It replaces two voltmeters and two frequency-meters, which are normally part of the synchronising set. A synchronising condition is set, when the phase difference and the voltage difference between UGEN and UBB, for a time of delay, are within the set limits. The synchronising check relay is then switched on and a SYNC LED is lit for a preset pulse time (e.g. 100ms, 300ms). |
|
CNE III and CNE V, are broadband noise generators with a usable output power from 9kHz to 2GHz, and 30MHz to 1GHz respectively.
Three monopole antennae are available with the CNE III which may be attached to the BNC connector on the top of the unit enabling it to act as a radiating field source. The CNE V has a single monopole antenna available. |
|
A reliable and handy instrument, for all the test and electronic engineers. HDS1022M model is designed for you to carry out a complicated on-site test. The Dual-channel unit provides 20MHz bandwidth with the sampling rate at 100MS/s, DMM function is also available.
Bandwidth 20 MHz
sample rate 100MS/s
Rising time 17.5ns
Independently floating isolated inputs Yes(for both DMM and Oscilloscope)
Time base range 5ns-5s/div
Vertical sensitivity 5mV-5V/div
Trigger modes Edge(Normal, Single shot, Auto),Video
Scope measurements 2 Cursor 5 Automatic
Record length 6K points per channel
Memory for screen and set up:4 ScreensA4 set up
True RMS multimeter: Volts, Amps, Ohms, Capacitance, Diode, Continuity
Voltage Range:400mV 4V 40V 400V
Best Accuracy VDC /-(1% 1); VAC /-(1% 3)
Current DCA: 40mA, 400 mA, /-(1.5% 1),20A /-(3% 3)
ACA: 40mA /-1.5%,400 mA /-(2% 1),20A /-(5% 3)
Resistance 400%u03A9 /-(1% 3),4K,40,400K,4M /-(1% 1),40M /-(1.5% 3)
Capacitance 51.2nF-100u /-(3% 3)
PC interface:RS232/USB
Power supply &Battery: DC power supply&Li-ion rechargeable battery upto 6hrs
Display:3.8inch color LCD
Resolution:320 x240
Dimension:180mmx113mm x40mm
Weight 690g
Warranty:3-yrs |
|
|
|
Oscilloscopes, Spectrum analyzers, Signal generators
