|
|
| With explosive growth in high-speed access and optics technology, and increased user demand for bandwidth, today’s communications network is becoming a bottleneck. To satisfy the users of tomorrow, communications networks must surpass their current levels of performance while creating new revenue-producing services. With a wide variety of traffic for voice, video and data sharing the network, equipment vendors must deliver traffic at high rates, with a high degree of reliability and cost-effectiveness, and with the ability to differentiate traffic services at wire speed. |
|
The Serial RapidIO PCI Bridge provides the capability to bridge between Serial RapidIO and PCI. It is part of a family of bridge devices aimed at applications wishing to take advantage of the Serial RapidIO interconnect.
Serial RapidIO is a switched data communication standard developed for the interconnection of devices on the same circuit board or between circuit boards across a backplane at rates in excess of 10Gbps. It has been developed as a more cost-effective, standards based replacement for expensive proprietary busses in high-performance embedded systems, such as networking and communications equipment and enterprise storage.
|
|
| Pericom has designed these high-performance devices for next generation markets that include Switches and Routers, Servers, HBAs, Data Storage Systems, PCs, Notebooks, Telecom Equipment, Multi-Function Printers, Test Equipment, Embedded Systems, and Data Acquisition Systems. |
|
| The Si5110 is a complete low-power transceiver for high-speed serial communication systems operating between 2.5 Gbps and 2.7 Gbps, making it suitable for OC-48/STM-16 and OC-48/STM-16 applications that use 15/14 forward error correction coding (FEC). |
|
Since the introduction of the first SONET SerDes ICs over 15 years ago, Vitesse has been a leading supplier of optoelectronics and Physical Layer (PHY) devices for OEMs around the globe.
Vitesse offers a comprehensive family of transport products ideally suited to a wide range of communications applications. Vitesse delivers high-integration and low-power solutions for protocols including Fibre Channel (FC), Gigabit Ethernet (GbE), and SONET/SDH at data rates up to 40 Gbps, with an emphasis on the development of products to lower the cost of bandwidth for applications from 1 Gbps to 12.5 Gbps. |
|
The DP/DP coupler interlinks two PROFIBUS DP networks and permits data transmission between the masters and the two DP networks. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/DP coupler is configured in the S7 software or by means of a GSD file.
Features:
° Up to 244 bytes of input data and 244 bytes of output data can be exchanged between two PROFIBUS networks
° Dual-redundant power supply
° Electrical isolation between the PROFIBUS networks
° PROFIBUS addresses can be set by DIL switch or software |
|
| Equipment manufacturers will achieve significant power and space savings when using Broadcom's advanced SONET OC-48 and OC-192 chips. Broadcom offers a complete family of SONET transceivers that enable the development of low-cost, high-density optical transport equipment. These high-density solutions handle more bandwidth in a smaller space, enabling telecommunications and service providers to better accommodate data and voice traffic over existing fiber networks. |
|
| IDT offers a broad telecommunications semiconductor portfolio, including products for access and transport, TDM switching and voice processing. IDT provides the industry's leading portfolio of T1/E1/J1 transceiver, LIU and framer products, the widest selection of time slot interchange (TSI) switches and the industry's highest density voice CODEC. These telecom products are used in a variety of communications applications, including multi-service aggregators and provisioning platforms, wireless base stations, enterprise routers and media gateways that are critical to enabling and accelerating the convergence of voice and data networks. |
|
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0 and SAE J2602.The IC furthermore can be used in ISO9141 systems.
Because of the very low current consumption of the TH8080 in recessive state it's suitable for ECU applications with hard standby current requirements, whereby no sleep/wake up control from the microprocessor is necessary.
|
|
| Industry standard single and dual drivers and receivers for RS232 and RS562 are available for power supplies from 1.8V to 5.5V with high ESD protection. DTE or DCE configurations are available in 3.3V or 5V versions. |
|
| We invented the charge-pumped RS-232 transceiver. Today, we are the leader in copper-wire data transfer, at speeds up to 800Mbps. Our product line includes USB, RS-232, RS-485, LVDS, and IrDA transceivers as well as Logic Level Translators, UARTs, and SCSI termination products. |
|
| LVDS & CML (Buffers and SerDes) Nationals leading edge LVDS and CML multi-megabit & -gigabit products include signal conditioners, serializers/deserializers (SerDes), drivers/receivers/transceivers, crosspoint switches, muxes, 1:n repeaters, buffers, and much more that drive LVDS, M-LVDS, PCI Express, SATA, SAS, XAUI, 4G FC, DVI/HDMI, and CPRI signals over low-cost cables and long FR4 traces. Serial Digital Interface and Data Transmission. |
|
Here the focus is on the requirement for the system provider to offer integrated solutions. Let us take for example the subject of Industrial Ethernet Networking: alongside the infrastructure elements such as switches and gateways Lütze also offers integrated solutions for cabling of the network. Lütze can supply all the necessary products, from Ethernet cables suitable for use in C-tracks to hubs and switches that can be mounted on DIN rails. This expertise is mirrored again in the application examples that overlap more than one industrial area.
So, for example, Lütze switches can be found just as easily in the semiconductor industry as in the harsh environment of railway vehicles. The list includes further applications in the textile and packaging machine industries.
The DIOPC serves as an intelligent gateway between the popular types of field bus and the Ethernet. A typical example is in greenhouse management where the DIOPC collects and controls signals from up to 10,000 inputs/outputs covering a wide variety of parameters including temperature, air humidity, CO2 content of the air, brightness, humidity of the earth and the condition of the plant fertiliser.
|
|
Broadcom's Voice over Internet Protocol (VoIP) chips, field-proven software and development tools for wired and wireless enterprise and residential IP phones, access equipment, residential VoIP terminal adapters, and carrier class gateways are enabling cost-effective, feature-rich products that are driving convergence of traditional public switched telephone networks and packet-based networks.
|
|
WLAN or wireless LAN communications is defined by a set of connectivity standards (IEEE 802.11) that support networks among access points (APs) and mobile computing devices - all without cabling.
Based on the revolutionary MIMO (multiple input multiple output) technique. |
|
The AR6000 family consists of WLAN solutions based on the Atheros
ROCm platform for high-performance mobile and embedded wireless
products. The Atheros ROCm platform gives customers unsurpassed
ability to:
- Build the most power efficient devices
- Design for smallest form factor applications
- Achieve the most cost effective designs
Greater integration of functionality
Low-cost chip solution
- Deliver Atheros-class performance in a wide array of mobile devices
|
|
|
|
Peripheral line-drivers, Bus controllers, Network controllers
