|
|
| Products 91 to 120 of 184 |
A system based on tapping chuck ant tap adapters for complete new concept.
The simplicity of mounting the tap, the rigidity and the perfect centering makes syncronized tapping easier to manage.
AVAILABLE IN:
HSK DIN 69893
DIN 69871
DIN 69880
DIN 1835 B+E
MAS BT
|
|
With modern machines operating at greater speeds, feeds and general load carrying capabilities, the demand for top quality workholding devices has never been greater.
Craftsman rotating centres have been specifically designed for use on modern CNC machines. After careful research, the best and most desirable features have been built-in so that an apparent small range will be more than adequate for most purposes. High precision, high load-carrying capacity and long life can be assured.
The centres offer several benefits including low profile bodies for increased tool accessibility, the highest precisional accuracy – to 0.003mm, and high running speeds up to 8000 rpm. The pre-loaded ultra-precision, angular contact bearings maintain running accuracy and give superior finishes and improved productivity.
|
|
|
High machining power and high working accuracy require additional support for many work pieces, due to their shape and length, in the form of a revolving lathe centre. A functional, revolving lathe centre/sleeve is required on the tailstock side as a torque transmitted chuck or face carrier. As the sole manufacturer, Röhm offers a complete sleeve range with different speeds and load values. Röhm offers high-quality constant face carriers for the efficient turning of workpieces. They were developed according to the modular principle, so the universal exchange of carrier disks and centring points is possible.
|
|
DEAD AND LIVE CENTERS
The centers offer several benefits including low profile bodies for increased tool accessibility, the highest precisional accuracy – to 0.00012’’, and high running speeds up to 8000 rpm. The pre-loaded ultra-precision, angular contact bearings maintain running accuracy and give superior finishes and improved productivity.
Chevin live centers have been specifically designed for use on modern CNC machines. After careful research, the best and most desirable features have been built-in so that an apparent small range will be more than adequate for most purposes. High precision, high load-carrying capacity and long life can be assured.
See Catalogues for standards and contact us for specials sales@chevintools.com.
|
|
Briney BT Flange Tap Holders Rigid
Briney BT Flange Tap Holders T/C
Briney NMTB Flange Tap Holders T/C
Briney Straight Shank Tap Holders Rigid
Briney Straight Shank Tap Holders T/C
Briney Tap Adapters Positive Drive
Briney Tap Adapters Torque Control
Briney V Flange Tap Holders Rigid
Briney V Flange Tap Holders T/C
|
|
No influence on setting length if the pressure of coaling liquid is equal to or less than 70 bar.
Most of the torque caused by the threading will be taken up by the square in the bottom. The hydraulic will take up the axial force.
For smaller threads than M16 you must use reducing sleeves and reducing adapters for the squares.
|
|
Techniks quick change tapping products lower your overall costs by providing a quick way to produce threads.
This tapping system is the most productive in the world. Change taps and tap sizes in only 5 seconds.
|
|
|
|
|
|
Series KSN
The tap holders of our KSN series are designed especially for use in CNC machining centers, CNC turning machines and other machine tools. The tap holders type KSN/Softsynchro are mainly used in CNC machines with synchronous spindles, due to their special constructional design. Owing to the very different requirements a tap holder has to meet, the KSN series can be divided into the following six types:
KSN for conventional thread cutting, marked with a yellow ring on the shell.
KSN/IKZ(Z)/MMS for thread cutting operations with internal coolant supply and minimum quantity lubrication (MMS) up to 10 bar (140 psi), marked with a green ring on the shell.
KSN/HD for thread cutting operations with internal coolant supply up to 50 bar (700 psi); marked with a red ring on the shell.
KSN/ICS for thread cutting with control of the thread cutting cycle.
KSN/Synchro for thread cutting on machines with a synchronous control system, for tap clamping with steel collets.
KSN/Softsynchro By installing a minimum length compensation on compression and on tension, small pitch differences between spindle and tap which would lead to high friction forces on the thread flank are compensated. An eventual increase of axial force during the thread cutting cycle is reduced to a minimum.
|
|
DSPL-D
Tapping Chuck with wide range double chucking head for tapping on reversible drilling, tapping and turning machines.
: M3-M42
TA../MK..
Self reversing tap holder for use on drilling machines which have only manual feed facilities and which do not have a reversible spindle.
: M3-M20
GNCN,GNCK
High performance tapping attachment with integral reversing gear for tapping applications in machining centres and FMS.
: M3-M20
|
|
|
Chumpower is a Taiwan Manufacture. We offer a complete range of Tapping Chuck. Such as DIN371,JIS,ISO for different systems and with or without torque tapping collet chuck. For detail information, please click the PDF catalogs and feel free to let us know your inquiries. We will send our reply mail as soon as possible.
|
|
| ... products without technical information |
| |
|
|
Chucks, Tailstocks
