|
|
| Products 151 to 180 of 279 |
The vices type SP81 of highest precision are constructed in steel of tempered nickel. They represent the tip of diamond of the Carminati production: with the employment of the optional members they can be composed in various solutions for problematic different of blocking.
Main characteristics:
- ganasce descendants who block in any condition the piece on the plan of the vice;
- control return of the ganasce;
- great opening and rapidity of positioning for series workings not.
Particolamente propmen and stampisti are indicated for. Rectified in all the details that compose to them guarantee the maximum precision.
They are produced in four models: 100 - 125 - 150 - 200.
|
|
clamping vise with mechanical/mechanical clamping force multiplier
Clamping vise NCN-s complete with crank-lever; work-stop; 2 eye-bolts; wooden packing case.
|
|
CMP Series is the earliest Power Vise of ChumPower
which is also the first one to provide Mechanical
Booster and adjustable pressure mechanism in
Taiwan. The skillful products are made for MC
machining center and have been sold around the
world for decades.
|
|
OK-VISE has designed a plate kit that allows the upside-down use of a regular single-wedge clamp.
When the single-wedge clamp is turned upside-down, the jaws will move linearly sideways also travelling simultaneously downwards along the wedge. This will create a pull-down action thrusting the workpiece with greater power towards the fixturing base.
|
|
"Ball Lock"® ball type quick-release attaching system
CHANGE YOUR ASSEMBLIES IN 60 SECONDS OR LESS
|
|
Precision alignment pin with a ground shank. This popular single-acting type is positive locking until released by pushing the button, which moves the centre spindle forward to allow the locking balls to retract into a radial groove. This type has the widest range of types and sizes. Available in steel or stainless steel.
|
|
|
|
|
|
This product family covers the following article groups:
- EH 2235. Lifting Pins (Steel / Stainless Steel 1.4305)
- EH 2235. Locating Bushes for lifting pins
Ball Lock Pins
- EH 2237. / 2238. simple finish (Stainless Steel 1.4305 / 1.4542)
- EH 2237. / 2238. with elastic grip (Stainless Steel 1.4305 / 1.4542)
- EH 2237. / 2238. with plastic grip (Stainless Steel 1.4305 / 1.4542)
- EH 2236. Clamping Pins (Stainless Steel 1.4305)
- EH 2240. Socket Pins (Stainless Steel 1.4305)
- EH 2240. Retaining Cables
- EH 2240. Locating Bushes for ball lock pins (Stainless Steel 1.4305)
The Ball Lock Pins by Halder for Connecting, Attaching, Positioning, Fixing, Holding, Securing, Lifting, Bolting, Interlocking, Adjusting …
With a wide product range and many years' experience in manufacturing including made to order, Halder offers the right solution for many applications in virtually every sector of industry:
- Mechanical engineering, tool-making and automotive
- Prefabrication and tank construction
- Fixtures and workshop fittings
- Industrial handling
- Hoists, platforms, racks and scaffolding
- Sport and rehab devices and equipment
- Medial applications
- Aviation…
In addition to the metric version we have also the product line “Flight-Pins”. This Ball Lock Pins in inch dimensions are according to aviation standard NASM (MS 17984 – MS 17990)
single acting
- EH 4210. with Button Handle (MS17984)
- EH 4211. with T-Handle (MS17985)
- EH 4212. with L-Handle (MS17986)
- EH 4213. with Ring (MS17987)
double acting
- EH 4214. with T-Handle (MS17988)
- EH 4215. with L-Handle (MS17989)
- EH 4216. with Ring (MS17990)
|
|
|
|
|
|
Material:
- Bolt stainless steel 1.4542.
- Mushroom knob and push button Stainless steel 1.4305.
- Balls Stainless steel 1.4125.
- Compression spring Stainless steel.
Surface finish:
- Bolt, hardened min. 40 HRC and passivated.
- Passivated mushroom knob and push button.
- Balls hardened HRC 58+4 and passivated.
- Passivated compression spring
Note:
Ball locking bolts are used for fast and easy fixing and joining of parts and workpieces. The two balls can be disengaged by depressing the push button, so that the parts to be joined can be pegged. When the push button is released the balls lock the connection safely and permanently. If required, the ball locking bolts can be provided with a holding rope.
The bolt made of high-strength, hardened stainless steel is suitable for extreme loads and provides a very high level of wear protection. Thanks to the high corrosion and acid resistance, they are mainly used in the foodstuff industry, in the chemical and petrochemical industry and as constructional elements in the aerospace industry.
Shearing force double-edged (F) = S · Tau aB max.
Accessory:
Key Ring 03199-15/19/23
Restraining Cable with eye 03199-....
|
|
Jergens offers a wide range standard pins made to order in various sizes and configurations.
Jergens is also capable of making special pins in large and small quantities to meet your unique design requirements.
A wide range of Mil-Spec pins are available from MS 17984 - MS 17990, MIL-P-45952/1
|
|
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application. We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in carbon steel and stainless steel. Button Handle configuration is ideal for applications that have limited space.
Handle is black anodized, machined aluminum.
Button is blue anodized aluminum.
Material: Carbon Steel or Stainless Steel
Handle Finish: Black anodized
Includes a ring for easy attachment of option lanyard.
2D, 3D, and 3D solid model drawings available for download. Click here to select and download solid models/drawings
Note: For best results downloading files, press your right mouse button and select 'Save Target As' or 'Save Link As'
|
|
Quick Release Pins - Metric
WDS250
Black cast aluminium T-handle
Blue anodised aluminium buttonStainless Steel Body
(SAE AMS 5643)
Includes hole and ring for easy attachment of optional chain or lanyard.
Other styles available
Carbon steel available
Quick Release Pins - Imperial
WDS250
Black cast aluminium T-handle
Blue anodised aluminium button Stainless Steel Body
(SAE AM5 5643)
Includes hole and ring for easy attachment of optional chain or lanyard.
Other styles available
Carbon steel available
|
|
Recessed Button Handle (Metric)
Kwik-LokTM Pins are manufactured in a wide range of sizes to meet any application.We offer short lead times for special sizes. Available in 5 handle styles, inch or metric, and in stainless steel.
The Recessed Button Handle design helps prevent accidental actuation of the button.
Handle is stainless steel.
Button is stainless steel.
Material: Stainless Steel
Includes ring for easy attachment of option lanyard.
|
|
* clamp is fixed or slides in T-slot of press
* variable span up to 15 mm
* adjustable or fixed (type BTSA)
* custom versions up to 400 kN
* replaces conventional bolt-and-nut clamping
|
|
|
|
|
|
Kaller Roller Cams are used for piercing, trimming, flanging and restriking.
The Roller Cam can be mounted in both vertical and horizontal planes and contain an internal gas spring for slide return.
The KALLER Roller Cam is developed to meet the markets demand for a standard Cam unit. The Roller Cam unit is the ideal solution for a small compact and cost effective unit. The Roller Cam is available for a max. piercing force of 30 kN, stroke 50 and 80 mm and for a max. piercing force of 50 kN, stroke 50, 80 and 100 mm. All models are equipped with an oilless slide bearing and, for the return action a gas spring is emloyed, with a an initial force of 200 daN.
The contact force between the driver and the cam unit is taken care of by a heavy duty roller bearing. The driver itself is to be manufactured by the user to give the required movement scheme and the contact surface on the driver should be hardened in order to maximize the lifetime of the Roller Cam. The angle between the driver direction of motion for the Roller Cam is to be 50°.
The Roller Cam can be fixed to the tool with a key and/or two cylindrical pins. When in the right position, the Roller Cam must be bolted to the tool with 4 M8 cap screws. The screws can be accessed from the side and from the top.
|
|
OK-VISE rotary columns are made of aluminium and they come with steel made corner clamps. They work as a trunion unit between indexer and a tail support. This new system makes efficient use of machinable area a reality, ultimately leading to savings in tool changes, less operator interventions and extended cycle times. Most important feature is a possibility to use subplates resulting to a remarkable cut down in machine stop times which is critical especially in the vertical machining centers.
Parts fixturing probably represents the best value in today´s metalworking technology, if you calculate the cost of a CNC machine tool, the cutting tools, tool-holders and tool-changer with both the programming and the design software and compare these investments to the cost of your workholding equipment. Fixturing normally costs only a fraction of the amount the others cost. Yet, the potential for time savings and process improvements offered by a good fixturing solution are substantial.
|
|
|
|
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
With a small foot-print for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Also available as an individual flange version
|
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, round
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Global diameter: K10: Ø78mm, K20: Ø112mm K40: Ø148mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force30 kN (pneumatic)
Max. holding force 105 kN
Use:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flange no. 6370ZB.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The modules are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8).
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation
|
|
|
|
|
|
ARNOLD SC high precision vices are compact, high and self-centring and maintain constant length, which makes them especially valid for working in 5- axis machining centres.
Self-centring high precision vices.
Accuracy of 0.01mm on the repeatability of clamping.
0.03 mm accuracy on centring.
Designed to work on machining centres with small tables and in 5-axis controlled centres.
Compact design with exterior guides that avoids deformation as the clamping force is distributed throughout the width.
Clamping force from 2 to 4 tons, in accordance with the clamping torque applied.Threaded right-left spindle, which can be operated with standard key.
These vices have a clamp casing system.The force is applied as near as possible to the piece to be machined. This means that the torque power is used to the full.
Interchangeable jaws can reach a height of 125mm, this means they can overcome the biggest obstacle for this type of work; avoiding collisions with the machine turrets or the rotation of the table.
|
|
centros2 – The multitallented – self-centring vice
One clamping device for almost all work pieces
Whether it is conventional clamping, small contact area 5-sided machining, pre-machined, cast, saw cut blanks, plates or any other workpiece, centros2 allows you to quickly adjust the clamping to hold your part.
The difference lies in the details
In addition to convenience and precision, centros2 also offers a sophisticated and ingenious system with interchangeable jaw sets. Standard jaws with integrated «pull-down» effect simply «click-into» position with no need for screws.
Modular design
The refined and future-orientated design of centros2 allows combinations of high jaws for 5-axis machines, a new revolving jaw or a universal plate to be used at any time.
|
|
The series EUROPA 99 is a composable high precision vice with varieted utilisations; can be used as you like with infinite blocking solutions:
- type E.D.M.A. 99 - autocentred self-locking doubled vice
- type E.M.A. 99 - autocentred locking vice
- type E.M.S. 99 - vice with draught or thrust blocking.
On the mobile and fixed parts there is a position guide for eventualy assembling of
special jaws. This range can be used on level ground or on side. Entirely buildt in
chromium nickel steel, hardened in 58 HRC and rectified with centesimal tolerance, to
secure unlimited duration.
|
|
Multitasking Vises Art.640
A Range of vises for the most advanced
5 AXIS machines application
MECANICAL CLAMPIMG
Self-centring eccentrics
• Two model available
Type 1 Jaw Width=74mm
Type 2 Jaw Width=99mm
• Jaw adjustment in steps of 2mm
• (Multiaxis self-centering)
• Construction completely in hardened steel and rectified HRc60
• Precision within 0,015 milimeter
• Minimums block (solid and compact Construction)
• Available series of ganasce interchanging
• Equipment standard: key
|
|
|
|
|
|
centrinos – Self-centring vice for small parts
Modular Structure
Despite of its compact length of only 170 mm, centrinos provides a large clamping range. Work-pieces and parts ranging in size from 0 – 152 mm can be held with clamping forces up to 20 kN with a torque of only 65Nm. centrinos can be used to clamp raw materials or as a precision vice with an accuracy to within 0.02 mm.
The standard version can be enhanced by the addition of raised 5-axis basic jaws for optimum access and with the appropriate attachment jaws.
Fully covered
Due to its specially developed slide geometry with guideways of 150 mm length, centrinos is the first truly covered self-centring vice. Malfunction due to dirt and chips belong to the past.
Operation from both sides
The design of the centrinos allows it to be operated from either side.
Base integrated directly into palette
The unique new design enables centrinos to be integrated directly into exchange palettes, such as EROWA or System 3R, without the need for a base plate. This is not only advantageous in terms of saving weight and costs, but also reduces the height of the unit and thereby increasing its stability.
|
|
The vice type MIPA. 95 is the ideal too to block pieces on rotating table machines in their various stationary positions, for mechanical zork, assemblage or movement of pieces. Entirely buildt in chromium nickel steel, hardened in 58 HRC, rectified, assure max precision, perfect function, unlimited duration. Inserting jaws in proper slides, sited in vice bogie, it s possible to block pieces of various form.
Function with air or oil until 20 BAR. Buildt in three models to satisfy various request.
|
|
|
|
|
|
The product family Spring Plungers covers the following article groups:
- EH 2203. Spring Plungers with ball and internal hexagon
- EH 2203. Spring Plungers with bolt and internal hexagon
- EH 2204. Spring Plungers, plastic
- EH 2205. Spring Plungers with ball and slot
- EH 2205. Spring Plungers with bolt and slot
- EH 2205. Spring Plungers with ball, headed
- EH 2206. Spring Plungers with internal hexagon
- EH 2206. Spring Plungers with internal hexagon and seal
- EH 2207. Spring Plungers, smooth
- EH 2207. Spring Plungers, long
- EH 2208. Spring Plungers, smooth, with collar
- EH 2208. Spring Plungers, smooth, without collar
- EH 2209. Spring Plungers, double ended
- EH 2210. Spring Bodies
- EH 2214. Lateral Spring Plungers
- EH 2215. Lateral Plungers, smooth (with / without sealing)
- EH 2215. Excenter for lateral plungers, smooth
- EH 2215. Lateral Plungers with thread (with / without sealing)
Additionally to the metric version we have also the following inch version available from stock:
- EH 2B02. Spring Plungers with bolt and slost
- EH 2B03. Spring Plungers with bolt and internal hexagon
- EH 2B05. Spring Plungers with ball and slot
As leading manufacturer with long experience in production of spring plungers we offer a product range for almost all applications. Also special constructions are available within short time upon request.
|
|
Material:
Steel version:
sleeve in steel quality class 5.8, ball in steel, spring in spring steel D
Stainless steel version:
sleeve 1.4305, ball 1.4034, spring 1.4310
Surface finish:
Steel version black oxide finish,
stainless steel version natural finish,
ball in steel or stainless steel, hardened
|
|
Steel Spring Plungers
Stainless Steel Spring Plungers
Steel Spring Plungers (Metric)
Stainless Steel Spring Plungers (Metric)
Delrin Tip Steel Spring Plungers
Delrin Tip Steel Spring Plungers (Metric)
Delrin Tip Stainless Steel Spring Plungers
|
|
WDS Index plungers are available in several types and material specifications
Materials include:
Hardened Steel Chemical Black Finish with options of steel or nylon ball
Case Hardened Steel
303 Stainless Steel and Stainless Ball
Stainless Steel with Nylon Body
|
|
|
The spring plunger with integrated detection (ref. 03020) is equipped with a proximity detector which can start a control signal. At the same time position and detection element this push rod is available of M6 to M10. The bodies, fingers and springs are out of steel. It is possible to order a push rod in mode normally opened or normally closed. It can be used in harsh environment in a beach of temperature of - 25° with +70°C and meets standard IP65. A mini diode (LED) inserted makes it possible to control the state of the open or closed push rod.
|
|
|
|
Locking elements, Clamping elements, Centering elements
