|
|
| Products 211 to 240 of 279 |
Low-profile clamps come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tool steel and are through hardened. Fastening operation involving one bolt (M5-16) ensures quick set up times.
|
|
|
To reach a maximum on production output on your machine tool, we offer you a wide range of standard elements, or we design and manufacture your specific Cube or Monoblock according to your specifications and requirements, withhin an overall accuracy of <0.01 mm.
|
|
MULTI-FIXTURE CLAMPS & STOPS
The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp design.
- Provides flexible set ups for hard to hold parts
- Works in both plates with tapped hole layouts or T-slot configurations.
- Can be mounted vertically or horizontally.
- Stops locate workpiece for repeat positioning.
- Larger sizes are ideal for mold shop applications.
- Tapered mounting slot prevents movement when clamping pressure is applied.
- Steps, as well as end faces of flat stops, are precision ground.
- MITEE-BITE also offers clamps and stops without a rest pad. These are designed for contacting a part at a higher point when the workpiece is resting on the table.
|
|
|
Suited for the heavy chip removal. This system will substantially increase the productivity of any machining center. Put all your favorite fixtures on MTS Pallets and gain productive time. Because the pallets are positioned and ready to go in seconds.
|
|
- Modular connecting element (hydraulic, pneumatic, mechanical)
- Hydraulic, double acting connecting element
- Hydraulic, single acting connecting element
Coupling elements to clamp and simultaneously centre workholding elements designed as a quick change system to shorten the set-up times.
o Referenced clamping of jigs and fixtures provided by repeatedly accurate placement at the "zero-point".
o For machining workpieces in several working steps on different machines.
In addition to the maximum of flexibility provided by Halder Zero-point Clamping Systems the way the system is designed (with the peg of the base element mounted pointing upwards and the connecting ring integrated on the jig) guarantees a high degree of production reliability, continuous accuracy, and soiling of the reference point is avoided.
|
|
Power-Grip
Userfriendly modular pallet system
Reduce set up time by changing the palletized work pieces in only seconds. Power grip guaranties an interference free machining under the most difficult environment with 750,000 clampings without loosing the reference and 0.002 mm system accuracy.
The simple and unproblematic clamping system can be arranged to meet your individual needs.
Customers Advantages:
- Rugged, productivity increasement
- Mount and adjust only once
- Production on all machine tables
- Minimized maintenance (low extra costs)
- Dirt immunity
- Fully automatic operation
|
|
|
Our quick change palletizing system offers you the perfect interface between your machine tools and work holding system or work pice. Beacuse of its high efficency, it increases your production output, and reduces your setup times up to 90%.
|
|
UNILOCK zero point clamping chuck system can reduce machine set up time by up to 90%. The UNILOCK system is easily adapted to existing pallets, fixtures and workpieces. Clamping chucks on every machine tool increases quality and throughput with repeatability of 0.0002" or better with quick, accurate changeovers.
UNILOCK - features of a Zero Point Clamping Chuck.
Self-locking mechanical clamping.
- Pneumatically activated with a minimum of 75 PSI, no hydraulics.
- Precision ground, short taper clamping knob, self-centering with repeatability of 0.0002" or better.
- Wedge style locking mechanism for larger surface contact.
- Clamping knob is simple to mount, with a through hole for three variations.
- Up to 11,240 lbs (Almost 6 tons) of clamping force.
- Self Cleaning.
|
|
SPEEDY classic - mechanically / hydraulically
- Our most complete and versatile system
- available in 4 sizes with draw in forces from 5.3 to 30 kN
- Draw in- positioning - clamping - releasing- retraction, all these functions are integrated in a single element
- best suited for full automatic solutions
- decades have proven the wide range of applicability of this zero point mounting system
|
|
Modular Zero-Point Fixturing System 9000
for Pallets, Workpieces and Fixtures
The Fixturing System 9000 is an universal and cost effective work piece fixture system for all machine tools. By equipping a machine with single or multiple System 9000 Zero Point clampers, workpieces or pallet mounted fixtures can be quickly changed to maximize productivity.
Features:
Constant zero point without realignment
Clamps and positions in one step
Simultaneous production and preparation time
Single and multiple set-up
Flexible fabrication - exchanges fixtures or workpieces in seconds for interruptions for urgent orders
|
|
Zeropoint Quickclamping compact cylinder
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: K10, K20
Use:
For retrofitting to modular profiles, columns, tombstones and cubes. Can be used with thin wall sections..
Note:
There are 5 standard connection options. 4 connections are installed laterally on the outside surface at a 90° angle. Connection is also possible in the base of the Zeropoint Quickclamping compact cylinder.
On request:
- Installation diagrams on request
- Automation solutions such as blowing out, blowing off, isolated applications, sealing air and media ducts
- Individual solutions, such as nipple and installation compatible or installation compatible for existing systems
|
|
SPEEDY classic - mechanically / hydraulically
- Our most complete and versatile system available in 4 sizes with draw in forces from 5.3 to 30 kN
- Draw in- positioning - clamping - releasing- retraction, all these functions are integrated in a single element best suited for full automatic solutions
- decades have proven the wide range of applicability of this zero point mounting system
SPEEDY metec - mechanically
- easy-to-handle
- Reduce setting up times and be flexible with the SPEEDY metec
- High clamping forces
- robust system
- in 3 sizes available with clamping forces of 12 kN / 20 kN / 50 kN
- No additional media required (compressed air, hydraulic fluids)
- Economical
SPEEDY airtec - mechanically/pneumatically
- well suited for most areas of application
- only one mounting nipple size, suitable for all sizes
- available in different variations (central locking, Index bores for the locking pistons and mounts with integrated blow off)
|
|
Zeropoint Quickclamping cylinders with pusher and central locking against pollution for automatised solutions
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter Ø 78 mm
Pull in force 20 kN
Holding force 55 kN
Use:
For installation in base plates, machine tables, clamping profiles, columns and towers, machine pallets and clamping pallets.
Note:
Through the central locking the pollution particles can not go into the nipple bore. The central locking element advances with an individually defined spring force
Blowing out and sputter functions
On request:
- Installation diagrams on request
- Hydraulic move-out of central locking
|
|
|
|
|
|
Zeropoint Quickclamping cylinder with release and contact controls for automatised solutions
3 possibilities of monitoring:
- Pneumatic monitoring:
Function of blowing out by compressed air for the cleanliness of support surfaces. After the installation of the pallet of workpieces, it occurs in the pressure line a dynamic pressure, of which this one could be detected by the mean of a pressure sensor.
- Electric monitoring:
Direct position monitoring of the clamping piston in the Zeropoint Quickclamping cylinder by the mean of an inductive sensor. Electric signal when the Zeropoint Quickclamping cylinder is clamped. Small height necessary for the assembling like for the Zeropoint Quickclamping cylinders K5 (19,8 mm) and K40 (42 mm).
- Hydraulic monitoring:
Monitoring of the clamping piston by a hydraulic closure valve. Dynamic pressure when the Zeropoint Quickclamping cylinder is opened, which can be detected by mean of a pressure sensor. Free hydr. flow when the Zeropoint Quickclamping cylinder is closed. Despite a hydraulic sensor, only small height for assembling is necessary.
|
|
Size: K20 ITH6
Zeropoint Quickclamping cylinders with turbine for automatised solutions with:
• Turbine function for complete cleaning of support surfaces without „shady side“
• Central locking against pollution particles
• Hydraulic or pneumatic locking sensors
• Control of contact by air blocked
• Hydraulic pre-expulsion for palletizing solutions with also possibility to swing completely free during the catchment
• No damage of media-coupling
|
|
Zeropoint Quickclamping extrusion cylinder for applications by:
• Round tables and 5 axes milling machines, turning machines
• Better level holding
• Large support surface
• Free passage for flange piece, tubes, forks ...
|
|
Zeropoint Quickchanging cylinder for turning machine with passage for spindle nose ...
• Quick changing of chuck, tongs and special equipment
• High-precision of radial positioning or arresting
• Media ducts against chuck lubrication, hydraulic clamping and exact points for cooling and cleaning.
• Blowing off and sputter
• Great holding force and form fit
• Release control
• Safety system in case of interference, thus low risk of damage of the machine
|
|
| ... products without technical information |
| |
|
|
Locking elements, Clamping elements, Centering elements
