|
|
| Products 121 to 150 of 209 |
"IR Montabert's breakers are the result of more than 30 years experience in hydraulic rock breaker design and manufacture.
Based on unique technology and quality, the heavy range offers the best tools adapted for demolition, mining, quarrying and public works thanks to their unequalled performance / weight ratio."
Autopower, Optipower, the BRV strike variation system , discover all the advantages of these innovations: extra power, maximum performance, exceptional reliability.
|
|
|
There is a Sandvik hydraulic hammer for virtually any breaking application that requires a boom-mounted percussive tool. From the advanced in-series hammers for mini-excavators, whose tools are so strong they are guaranteed for life against breakage, to the extra heavy-duty G-series for excavators from 27-100 tonnes in weight, there is a reliable, low-maintenance, easy-to-fit, high-performance Sandvik hammer certain to raise productivity, optimize results and give a lower cost per ton of material broken.
|
|
|
|
|
|
Hydraulic breaker Silenced:
- The internal control valve system provides a shorter, direct and larger oil flow which reduces oil heating and increases by 15% the output and seals life.
- Only two moving parts (piston + control valve) for increased reliability and low maintenance.
- Maximum impact transfer by nitrogen and hydraulic pressure. Perfect piston-tool weight ratio assures less recoil.
- Idle stroke protection : a high pressure cushion ensures piston absorption at full stroke and shock protection. When working : piston recoil is absorbed by the nitrogen chamber compression which releases this energy in strike force.
- All breakers have full protection brackets with noise, shock and vibration absorbers.
- A long fronthead fitted with 2 bushings for a good tool guiding, longer lifetime of toolbushing and tool bending prevention.
- Two retainer pins for longer pin durability, less burr on tool and easy tool replacement.
- Lower bracket part strongly reinforced with abrasive resistant steels.
|
|
Large size Hydraulic Breakers Base machine 14 to 70 tons
Advanced technology supporting new functions
Patented dust intake prevention system.
Improved lubrication greases front head and thrust bushing.
Higher back head pressure results in a 20% increase in impact energy over previous models.
Free spinning front head bushing ensures uniform wear.
Built-in hydraulic safety valve actuates when it exceeds the maximum pressure.
|
|
Medium size Hydraulic Breakers Base machine 5.5 to 14 tons
Increase in back head pressure and large piston diameter results in 25% greater impact energy.
Longer thrust bushing improves piston alignment during impact and incorporates grease holes to evenly distribute grease in the front head.
Through bolt design with large CD threads for added strength.
Increased front head wall thickness for added service life
|
|
D&A 30V, 50V, 60V are used for skid steer loaders.
ITEMS - MODEL : D&A 30V/D&A 50V/D&A 60V
Operating Weight kg(lbs) : 335 (737)/380 (836)/400(880)
Impact Energy Joule(ft.lbs) : 696 (514)/902 (665)/981(723)
Blow Rate bpm : 550~1,100/380~1,000/380~900
Required Oil Flow lpm(gpm): 30~60 (7.92~15.84)/35~70(9.24~18.48)/50~80(13.2~20.32)
Operating Pressure kg/(psi) : 110~165(1,595~2,393)/110~165(1,595~2,393)/120~165(1,740~2,393)
Overall Length mm(inch) : 1,530(60.2)/1,615(63.6)/1,639(64.53)
Suitable Carrier ton(lbs) : 2.0~4.5(4,400~9,900)/3.0~6.5(6,600~14,300)/4.5~8.0(9,900~17,600)
|
|
|
|
|
|
The MAVERICK™ 500HSP Hydraulic Hammer
Energy Impact Class: 350 ft./lbs.
Operating Weight: 386 lbs
Tool Diameter: 2.09”
Required Oil Supply: 6.6-10 gallons/min
Pressure Adjusted: 1305-1740 p.s.i
Blows/Minute: 550-1,100
Carrier Weight: 6,000-10,000 lbs.
MAVERICK™ Equipment is a leading supplier of high quality hydraulic hammers to the construction, mining, demolition and utilities industries. All MAVERICK™ hammers are designed to provide maximum reliability and long operating life while adding to the bottom line. With 14 models, MAVERICK™ offers hammers compatible with a variety of carriers and applications.
These simple designed breakers are fully enclosed in a Hardox® case which protects the hammer, even in the most challenging environments. With standard features such as slip fit lower wear bushings, which cut down on maintenance to Carbon Martensite pistons, to componentized power cells, owners of MAVERICK™ hammers utilize a product that will last for many years.
Attractive pricing combined with high production and low maintenance equal a high return on investment. Backed by a comprehensive, three year warranty, MAVERICK™ hammer owners can be confident they will get their job done quickly and efficiently.
|
|
HYDRAULIC BREAKER
Three hard hitting models with output ratings from 150 ft. lbs. to 500 ft. lbs. (21kg m - 69kg m) up to 1200 blows per minute make short work of the toughest jobs. Simple, efficient low recoil design requires no surge dampening or pressure accumulator which translates into fewer moving parts, fewer problems and long high power trouble-free performance. All breakers are available with a wide choice of quick change tools.
|
|
Small size Hydraulic Breakers Base machine 1.0 to 5.5 tons
No back head gas charging for ease of maintenance.
Through bolt design with large CD threads for added strength.
Increased front head wall thickness for added service life.
|
|
Fork Lift Grab STAZ
Specially designed for heavy duty work with fork lift trucks. Light-weight, yet with a high carrying capacity
due to the use of high-tensile steel for loadbearing parts.
Fully hydraulic parallel opening range.
Low-maintenance steel-polyamide sliding guides.
Standard Specifications:
Manually adjustable pressure relief valve.
Oil Pressure Gauge
Can fit all the usual packs of building materials due to a large opening range and to the exchangeable grippers
which come in various lengths and designs.
Polyamide sliding guides come with a 5 year guarantee.
All Forklift Grabs can also be used as cubing grabs in fully automatic cubers for blocks and pavers.
Besides the hydraulically operated grabs also purely electrically operated grabs can be offered on request.
|
|
|
|
|
|
Block Loading Grabs – with Adjustable Height AKZ-H unigrip / AKZ-N unigrip / AKZ-S unigrip
This has the same design and characteristics like the AKZ-unigrip but comes with adjustable height for differing pack heights. This universal type of grab is suitable for the transport of building materials of all types and sizes. By the adjustable height and the large opening width it can be used for all building materials on pallets and without pallets.
A choice of various heights.
The vertical height adjustment bar is equiped with 4 drillings which are situated on different height levels, each shifted by 90°.
The different levels are for the following heights:
level 1 (turning 0°) 1.100 mm
level 2 (turning 90°) 1.280 mm
level 3 (turning 180°) 1.470 mm
level 4 (turning 270°) 1.650 mm
Height Adjustment with a choice of fixed or floating position.
Now even more simple handling of the height adjustment - just move one lever.
Higher pressure – finely adjustable, for example to grip material which is sensitive against pressure.
Low overall height of equipment.
Standard Specifications:
Hydraulically and smoothly operable and works in parallel.
Robust gear rack balance for the absolute synchronous running of the hydraulic cylinders.
Large low-maintenance polyamide sliding guides with 5-year guarantee.
Automatic pressure control. Carrying capacity of height-adjustable versions in retracted position will be increased as per positive working automatic pressure control up to the respective figure indicated in brackets.
Manually adjustable pressure-reducing valve.
Oil pressure gauge.
4 hanging eyes for cables or straps/belts.
Light-weight construction in high-tensile steel.
|
|
Primary Crusher : Vp Type Model : Vp9, Vp15, Vp22, Vps22
A compact unit is realized through use of a high-tension cast steel frame, a high-tension steel arm and high output trunnion-mounting cylinders.
The freely 360 degree rotatable primary crusher places no burden on the hydraulic shovel, and offers superbly powerful, speedy performance - the highest crushing ability of this class - as well a large opening width
|
|
A universal, single unit, fully 360 degree rotatable pulling-down machine capable of a wide variety of jobs from reinforcing bar separation/collection through crushing into pebbles, allows for horizontal, vertical or oblique operability.
The Vm22 'long cutter' (cutter length : 360mm) specification is optionally available.
|
|
Secondary Crusher : Vs Type Model : Vs15, Vs22, Vs22FTR、Vs30
An secondary crusher combining the greatest crushing ability of this class with a large opening width and Furukawa's original center tooth, along with adoption of a box structure frame and high output trunnion-mounting cylinder have led to realization of a lighter, sturdier and more compact unit that offers unrivalled performance for such tasks as effortlessly crushing rock into pebbles and separation/collection of reinforcing bar.
Wide and powerful jaw openings process rubble from bridge columns, retainer walls, buildings and foundations. New high speed valve cycles the jaws quickly. Cylinders are a short stroke trunnion design making the compact. Jaw and teeth are specially designed to capture material and process it efficiently
|
|
HYDRAULIC ROCK / CONCRETE CUTTING ATTACHMENTS
Antraquip's line of rock cutting attachments are designed to be mounted on suitable excavators ranging from 2 to 110 tons to be used an various rugged mining, tunneling and general construction applications.
We provide two types of cutter head designs, the transverse design and the lengthways (uniaxial) design to ensure the ideal fit for any given application. The AQ line of cutters are engineered and equipped with a high torque low speed hydraulic motor with rugged gearing and symmetrically aligned cutter bit patterns on the cutter head that enables the machines to be extremely efficient not only in specialty applications but also in hard rock excavation often outperforming hydraulic hammers.
|
|
|
|
|
|
CUTTING UNITS
The hydraulic milling cutters of the ETH series can be mounted to an excavator in lieu of the bucket. The ETH is driven by a hydraulic motor which is powered by the hydraulic system of the excavator. Applications include tunneling, mining, quarries, roadway construction, demolition, forestry, and marine use.
The hydraulic milling cutter is suited for cutting rock, concrete, asphalt, industrial minerals, masonry and other similar materials. Examples of uses in various industries include:
Tunneling and Mining: Heading; profiling; restoration; ripping; and mineral extraction
Civil Engineering: Trench milling (down to 27.5 inches); foundation milling; cellar excavation
Road Construction: Asphalt cutting
Demolition: Well controlled, partial demolition while safeguarding the remainder of the building
Hydraulic Engineering: Lowering of navigable water ways; milling of trenches for pile planking; milling of culverts in river beds
Low noise operation: In all applications where other excavating equipment (i.e. hydraulic hammers) is too noisy
|
|
Excavator attachment
A versatile accessory for excavators
High productivity
Quick-change facilities from rock breaking to cutting
Simple concept compact design
Wide range of application
High availability and little maintenance requirements
|
|
Paver laying and transportation
VM 401 is an innovative, state-of-the-art paver installation machine setting new standards due to its special comfort, high carrying capacity and modular design. Established VM-features such as the robust chassis and the double articulated steering have also been integrated.
A powerful 4-cylinder diesel engine offers sufficient output reserve. The spacious driver's cabin is separated from the chassis and the easy to use joystick operation was improved for driving comfort.
The modular configuration of the cabin and hydraulic system allow for customized equipment matching individual demands, including an optional scratch-resistant safety glass in the driver's cabin.
|
|
Hydraulic Crushers break concrete structures such as bridge pillars, towers, walls, etc. in primary demolition.
CR SERIES HYDRAULIC CRUSHERS
Ideal for primary demolition, the CR Series is designed for controlled demolition with reduced noise levels as well as lower the dust emissions. A full 360° rotation mechanism allows safe positioning of jaws by increasing the unit's flexibility and ease of use. Features include a wide jaw opening, fast cycle times and hard crushing force.
|
|
Shear (Hydraulic Motor Rotating)
360° degree free rotating system by hydraulic swivel motor.
Available to cut reinforced steel structures such as H-beam or I-beam.
Designed for scrap preparation and recycling in scrap yard.
Speed up valve can be installed at option.
|
|
Combi cutter which demolishes steel-frame buildings or concrete buildings with one machine.
・Main features
The main and jaw frame are made of high tensile strength cast steel for strength and light weight. The sharp cutter with large cutting force cuts heavy H steel easily.
The frame and jaw are tapered to design go into a narrow place easily.
A sharp giant center tooth gives a powerful crushing force.
Designed to crush a large concrete block in one stroke.
The tip tooth faces outward to ensure cramping of concrete piece.
A high speed valve is provided as standard equipment.
A large sliding piston rod guard is provided as standard equipment
|
|
|
|
|
|
SCRAP SHEAR - SH
FOR CUTTING METAL MATERIAL
The dedicated Mantovanibenne scrap shears are the most productive tools for all the metal processing requirements of the demolition site. Outstanding cutting forces make light work of steel sections, pipes, tanks, railway equipments etc. The powerful hydraulic cylinder develops a very high cut-ting force to cope with the toughest materials. Both the cylinder and the hoses are fully protected within the main frame of the shear. Continuous hydraulic rotation through 360° allows the attachment to be positioned quickly and accurately, tackling any type of demolition work.
Main features
Stick-mounted: choice from 8 models available for excavators from 2 to 80 t.
Bucket-mounted: choice from 8 models available for excavators from 4 to 125 t.
POWERVALVE, for the shortest cycle times. High speed Low pressure. Low
speed high pressure
Wide jaw opening
Removable and reversible cutters
All models are equipped with 360° hydraulic rotation
SH shears are constructed in hard wearing steel with high elastic limit which gives excellent resistance to abrasion with exceptional mechanical strength
Can be equipped with brackets for the Quick Coupler QC (QC is foreseen in the double version mechanical and hydraulic ) or with pinion brackets
|
|
|
|
|
|
Material Processor
Material ProcessorOn-site versatility is optimized by the availability of interchangeable jaws
NPK's Material Processors are an efficient solution for concrete, steel and rebar processing, building and bridge demolition, and recycling.
Maximum productivity
Interchangeable jaws provide superior results in demolition, concrete processing and scrap recycling.
Cost effective
Far more economical than buying four different attachments for four different applications.
Rugged design for extended life
Manufactured from high-strength, abrasion-resistant steel; reinforced shield protects cylinder rods.
Full 360° power rotation
Provides an effective angle of attack for any job wherever the location.
Reduced transportation costs
On-the-job processing reduces material volume, which cuts down the number of trips required to haul material away.
The NPK advantage in parts and service
Over 280 NPK distributor outlets are professionally staffed and conveniently located to serve your needs. Just one of the many reasons that have made NPK the leader in boom-mounted attachments.
Cylinder design improves crushing/piercing power to handle the toughest jobs
Exclusive integral hydraulic intensifier system boosts power by reducing cycle time, while improving productivity and providing greater power-to-weight ratio.
|
|
Pliers - Shears
Series CP
400 kg - 3950 kg
A wide range of hydraulic multi-processors for 2 to 50 tons machines. Entirely made of anti-wear Hardox plate and available both with mechanic and hydraulic rotation. They are suitable for any kind of demolition of reinforced concrete structures. On some models is available the chipping kit.
|
|
Features:
good performance-to-weight ratio
quick positioning thanks to
mechanical 360° rotation unit
replaceable blades
optional pulverizing plates available
for CC 550
Applications:
light demolition work e.g. narrow
lightly reinforced concrete elements,
masonry
particularly effective for stripping out
and reconstructing interiors
|
|
Applications:
The Hydraulic Steel Shear can be used for:
Scrap processing
Demolition
Recycling
Advantages:
The HSS Hydraulic Steel Shear combines extreme versatility, strength,
effi ciency, and durability, and are available in models suitable for a wide
range of carriers from 15 to 100 tons.
360° hydraulic rotation
Well protected power cylinder
Main cutters can be turned four times
Interchangeable teeth
Complete structure made in Hardox
Strong cutting force
Blades with trapezoidal profi le
|
|
|
Sandvik cutter-crushers and multi-processors are designed to cut through steel, timber and reinforced concrete, and break it down into manageable chunks. Normally excavator-mounted, they are used to dismantle stubborn structures in tough primary demolition jobs. With very high shear force and great crushing strength, they can be used with different jaw sets for different applications, including pulverizing. Sandvik cutter-crushers are flexible, reliable, high-performance, low-maintenance tools that give a low cost per ton of material demolished.
|
|
Hydraulic scrap shears:
- Standard Speed Valve.
- Central pin with tighten adjustment.
- Reversible blades.
- Cylinder protection.
- 360° rotation.
- Optimized design and shape :
- strength, weight, visibility.
|
|
|
|
Buckets for construction equipment, Shears, Grapples, ...
