|
|
|
|
|
|
Nurock Mixers
* Remote control with simple one switch operation
* Hydraulic mixer swivel and chute couple with 3 x 1m aluminum chute extensions providing excellent concrete placement
* Pneumatic vibrators (4 on sand hopper, 2 on cement hopper) providing positive feed of materials
* Dual admixture system, Hi and Lo flow for value added concretes
* Wooden protective boards fitted to sand and stone hoppers
* Removable hopper centre panels for aggregate use
* Trigger activated lubrication system, providing lubrication where and when it's needed without wastage
* Polypropylene water tank for durability
* Industrial polyurethane coating provides protection in aggressive environments, specially developed for off shore applications
* Stainless steel conveyor belt fittings for longer life
* Flame hardened solid steel conveyer sprockets
* Adjustable conveyer belt scraper to keep belt free from material build up
* System designed from the outset to have low maintenance cycles and uses high grade materials throughout to ensure this
Specification
Total concrete production: Up to 9.2m3
Aggregate: 11.5m3
Cement: 2.4m3
Water: 2000 Ltrs
|
|
SW5317GJB Main Specification
Drum Capacity 12 m3/14 m3
Engine Model Steyr WD615.69
Rated Power 247 kw
Drvie Model 8 x 4
SW5317GJB adopts advanced design. On the basis of integrating the advantages of various mixers home and abroad, with optimized CAD, the mixing drum is divided into three sections in the shape of a pear. According to the moving pattern of concrete inside the mixing drum, different section is made of quality hard wearing 16Mn steel plate with varied thickness, lengthening the service life as well as achieving synchronous wearing of the mixing drum body and blades.
|
|
|
|
|
|
Mixing carriers of Zhongqi HOWO series are among the mature products of Yutong special purpose automobiles, accounting a huge market share with its powerful engine, high volume and extremely high cost performance.
Yutong special purpose automobiles put Yutong group years of unique advantages on chassis R&D and manufacturing into full display, fully introduced upper body technics of mixing carriers from Japan and Germany, match it with the original package of hydraulic system imported from world famous factories carefully.
Products have particularly been undergone the structure intensity analysis and chassis calibration by the post-doctoral working station of Yutong group as well as the technology center of nation-level. Components are all processed through parkerising
craftsmanship and grit blast pretreatment technology; tanks are perfectly welded by special-purpose lining instrument along with PANASONIC full automatic protection welder; lacquer sprayings are all done strictly in accordance with the coating standard for the luxurious buses, ensuring reliable quality and excellent performance.
Overall dimension(L×W×H) 9300×2490×3845 mm
Chassis model : ZZ1257N3841W
Engine model : WD615.69
Power 247 kw
Mixing volume 10 m³
Speed of charge-in ≥3.0 m³/min
Speed of discharge ≥2.0 m³/min
Surplus rate ≤0.5%
Hydraulic system : Italy Messori
|
|
- Model: AM6 FHC
- Nominal capacity: 6 m3
- geom Volume: 11.700 L
- F illing ratio: 51,3 %
- Water Line: 7.100 L
- Drive: PTO
|
|
- Model: AM10 FHAC
- Nominal capacity: 10 m3
- geom Volume: 17.310 L
- F illing ratio: 57,7 %
- Water Line: 11.080 L
- Drive: PTO
|
|
|
Liebherr build truck mixers to-measure. In accordance with customer requirements regarding chassis, nominal size, design, paintjob and accessories, Liebherr provide a tailor-made solution to every type of application. Advantages of the Liebherr-truck mixer amount to an optimum utility value for more profit.
|
|
3030 Anti-pollution storage depot
Robust steel sheet construction for statutory storage of water-polluting materials; safe and simple transport with crane or forklift. With overflow basin and binding-agent starter set.
Options:
any special colour
your logo on the doors
|
|
The BHS Twin-Shaft Continuous Mixer represents an effective and reliable solution for continuous mixing processes, particularly with a high proportion of aggregates.
The mixer is suitable to produce aggregate mixes, RCC, landfill sealings, lean concrete etc.
Notable features are reduced wear, simple maintenance and low energy consumption.
The cured material on the trough wall serves as a wear protection. You just have to readjust the mixing tools from time to time. As an alternative we also offer hardcast tiles as wear protection or a rubber trough.
|
|
HIGH-SPEED CONTINUOUS MIXERS
High-speed continuous mixers, turbo-mixers, single or articulated-arm, mobile mixers, suitable for all No-Bake processes, from 1 to 100 th sand
|
|
|
|
|
|
The line of IMER Group belt conveyors stands out for the versatility of its applications in the work yard. Our range is made up of LT 1200, LT1500 telescopic and LT1600 telescopic.
The belt conveyors are driven by a hydraulic transmission in vertical position capable of turning 280° around their axis, facilitating their positioning and manoeuvrability, even on uneven ground. During the distribution, the truck must remain parked in the area where it is positioned.
The speed of the conveyor is independent of the vehicle that carries the mixer or of the auxiliary motor, as it is provided by a hydraulic fixed displacement motor connected to the conveyor drive roller, which in turn is driven by a hydraulic pump connected to the power takeoff of the vehicle transmission.
The conveyor structure is made of steel with a high yield point providing the necessary sturdiness and elasticity. The accurate design and the constant attention to the requirements of the end user gives the belt conveyors reliability, and allows easy access to all their parts for cleaning and maintenance.
The conveyor makes it possible to easily and immediately distribute, at the desired point, the material contained in the mixer: concrete, gravel, sand, cement-bound granular material, etc.
The conveyor is ideal in the building of foundations, small floors, and also concrete pillars and road works. It is an ideal means, both in functional terms (flexibility and versatility, even in severe conditions) and in economic terms.
|
|
|
The LTB conveyor belt is the most cost-effective solution for transporting materials such as concrete, sand, crushed stones or pebbles from the truck mixer into the building site.
|
|
|
|
|
|
VN (OLI® Standard Line) and VNP (OLI® Professional Line) are Electric High Frequency Concrete Vibrators. The VNP Professional Line develops higher centrifugal forces and has a shaft that is equipped with four bearings (plus needle bearing) which makes this line suitable for extra-heavy-duty jobs. Both lines include16 ft protection hose and 33 ft electric cable with CE plug and ABS hand switch.
The strongly increased compaction capacity of the VNP Professional Line results in perfect elimination of air bubbles in the concrete in compliance with modern concrete technology. With 42V/200Hz or 230V/200Hz and six different head diameters the range is suitable for every kind of building site job or for the use in concrete compaction plants (floor manufacturing).
- Complete motor protection through thermistors (VN Standard Line)
- Head diameters: 1-1/2", 2", 2-1/4", 2-1/2", 2-5/8", 2-3/4"
- Amplitude: 0.05" to 0.1"
- Efficiency diameter: 2 ft to 6 ft
- Tip manufactured in steel or Vulkolan
- Head surface hardened
- Low electric input
- High performance
- Two years warranty
|
|
H.F. ELECTRICAL IMMERSION VIBRATORS
42VOLTS-200HZ-12 000 RPM
EQUIPPED WITH 5M HOSE, SWITCH CASE, 10M CABLE ET FICHE CEE. STEEL OR VULCOLLAN CAP WORKING ON FREQUENCY CHANGER
|
|
|
Wyco High Cycle Vibrators are manufactured to properly consolidate difficult performance based concrete mix designs. The consistent speed output, under variable loads, produces uniform results. The unique Square Head design ensures that your job will have the quality and production you have come to expect from Wyco.
|
|
Our vibrators represent an optimum solution for the numerous problems arising from the vibration of concrete.
They are available in a wide range on models and satisfy the needs of the big as well as the small companies in terms of a continous and heavy duty or of a saltuary and lighter use.
The housings consist of special steel and have been were subject to a termic tratment against wear due to the abrasion caused by the concrete. The vibrators have an insulation according to IP 67 and are suitable for immersion also with high specific pressures.
|
|
Italvibras produces 2 series of electric vibrators with frequency variation which can be applied to systems and machines in the precasting industry: ITV-VR Series, with variable frequency; ITVAF Series, with fi xed frequency. The ITV-VR series electric vibrators are able to provide a centrifugal force of up to 5300 Kgf (52 kN) at a frequency varying from 0 to 6.000 rpm. The ITVAF series electric vibrators with fi xed vibration (6000 or 9000 rpm) provide a vibrating energy of up to 1480 Kgf (14,6 kN).
Both are available with either the fixed or cradle connection.
|
|
|
Electric rotary vibrators at high frequency and variable frequency for cement vibration, vibrating tables and prefabrication moulds.
|
|
VFV-VFX External electric vibrator with variable frequency, for application on vibrating tables and pre-fab moulds to vibrate concrete elements.
Available also with cradle attachement version VFC.
|
|
|
|
|
|
The SOMAI external pneumatic vibrators are characterized by sturdiness, a long life, safety and a practical and simple use.
They are the best offered on the marker of pneumatic vibration.
Strict selection of materials, the anti-wear treatment, the most accurate execution and control are the guarantee of our vibrators.
Our vibrators are distributed in the whole world and used even under the hardest conditions, i.e. in very hot or very cold climates, in prefabrication works, in tunnels and readworks.
Special features:
- While the vibrator is operating there is the possibility to regulate the power and frequency of the vibration. This prevents the extremely dangerous resonance frequencies and allows to obtain high-quality manufactures with an excellent degree of finish;
- simple and safe fixing by means of cradle vices or bolts;
- execution without bearings (free rotors); the moving parts are of special steel and treated against wear so that they require very little maintenance and reach a long operation life;
- operation with compressed air, which guarantees the highest degree of safety and accident prevention.
|
|
The Most Advanced Concrete Vibrator Ever Designed
Wyco's Electric Flex Shaft Vibrator has become the industry standard for quality concrete consolidation. Engineered for both performance and productivity, Wyco Electric Square Head Concrete Vibrators:
Deliver more torque with less amps than other motors on the market
Operate at less than 65% of full load capacity under normal job conditions
Retain speed under heavier load
Allow the use of longer flexible shafts and larger vibrator heads
Exceed industry standards to assure safety
Provide 20-50% faster consolidation
|
|
Trans MixAir 260/55
The exceptionally gifted one of the conveyer-mixers of cover combines ingeniousness and robustness. The meeting of the Lancy innovation and Brinkmann manufacture.
* Performances Hauls (noncumulable):
O horizontal: 200 m
O vertical: 50 stages
* Maximum flow: up to 20 cycles per hour
* Maximum granulometry (with exit Ø 90: up to 20 mm
* Noise level following European directive THIS 2000/14: 96 dB
|
|
Trans MixAir 200/30
Essential assistant of the craftsman tile-layer, this conveyer-mixer will allow you to associate speed, quality and profitability for the realization of your covers.
* Performances Hauls (noncumulable):
O horizontal: 100 m
O vertical: 15 stages
* Maximum flow with cone: 3m3/h
* Maximum flow with skip: 4m3/h
* Maximum granulometry (rolled aggregates): 15 mm
* Noise level at the work station: < 85 dB
* Sound power: < 100 LWA
|
|
Putzmeister Mörtelmaschinen GmbH is pleased to present one of its most extensive ranges of machines: from the versatile plastering machines, such as our mixer and screw conveyor pumps, to state-of-the-art floor screed conveyors and our small fine plaster spraying and paint pumps, and beyond to our sturdy fine concrete piston pump.
We can provide you with the right machine and suitable accessories for virtually all applications.
Floor screed pumps
for self levelling floor screed and traditional cement screed, for mixing and conveying materials from sand, gravel and cement to pourable and fine concrete.
|
|
TRANSMAT 27.45
DIESEL-POWERED SCREED MIXING AND PUMPING MACHINE WITH BUILT-IN COMPRESSOR
TRANSMAT 27.45 is one of the top models in the range of machines designed for mixing and pumping screeds, insulating mixtures, concrete and aggregates.
|
|
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
|
Injector GP140 is used for iniettare mixtures of water and concrete. The drive is given from a jack that, set in action from a telephone exchange electrical worker, transmits the alternative motion to the same injector. And' supplied of gauges in order to visualize the pressure of injection and the pressure of operation of the telephone exchange. It can work in two various ways: high pressure in order to break off the valves with little capacity, lowland pressure and high capacity for the true and own injection. The injection parameters: pressure and capacity, can be regulated to you. The amount of boiacca iniettare through contacolpi an electrical worker can be regulated also. Of I block reduced, easy transportable and very protect, the GP140 concurs an easy one uses in all the job conditions.
|
|
The development and manufacturing of concrete mixing plants has a long tradition at Ammann. The extention of the product range with a horizontal and a mobil concrete plant emphasises Ammann's strong position in the market. Completely new possibilities regarding flexibility and mobility are given.
The know-how from the core compentences such as mixing technology, state-of-the-art engineering and plant construction guarantees highest quality and productivity.
|
|
BHS is the specialist for demanding mixing tasks, no matter if:
# dry or wet materials
# batchwise or continuous process technology,
# medium or high output per hour
# stationary or portable system
# medium or high metering accuracy
# coarse-grained or fine-grained feed material
# cohesive or sedimenting materials
With our broad range of mixers, we can offer a so-lution to almost any problem in mixing technolo-gy. Please contact us! Numerous references tes-tify our competence and expertise. On request, trials can be performed in our testing facility in order to find the best solution also for your parti-cular mixing task.
|
|
|
|
|
|
ORU LOGIK is the horizontal plant with storage bins studied to completely respond to the compactness needs and rapidity of installation on site. The conveyor belt and the weighing hopper are inclined to keep as lower as possible the loading point of the aggregate hoppers, avoiding excavation works
* The aggregate storage bins are widened at only 5 metres from ground to facilitate the loading process by wheel loaders of large dimension and to increase the storage capacity
* The rationality of the construction process and the extension of the pre-assembly reduce slightly the times of installation of the plant on site.
* Thanks to its modularity and compactness, ORU LOGIK batching plant can be loaded on standard trucks
The ORU ROME horizontal batching plants are designed and built for the specific needs of precast industry.
The support structure and the aggregate storage bins are hot galvanized. This type of surface treatment of the metal ensures an excellent protection against corrosion in any environmental condition, and therefore a longer life and better inalterability of the product. On request, the equipment can also be provided with paint coating over the galvanized surfaces.
The main characteristic of ORU ROME plants is their extreme reliability thanks to:
* The aggregate and cement weighing system uses homologated load cells
* The management unit of the plant is tailored to the specific requirements of the customer. It is foreseen manual, automatic, fully automatic or computerized working.The operator can follow and check on the control synoptic, or by video, each active phase of working cycles.
* To facilitate the discharge of particularly cohesive materials, vibrators have been installed on independent plates applied with a particular system to avoid negative stresses to the plant structure
* For water introduction checking, we can supply, either separately or combined, manual, timed and hygrometer systems
* A wide range of accessories (on request) allows to customize the plant: resistive or microwave hygrometric instruments to control the moisture in the aggregate as well as in the mixture in the pan, ecological systems for smoke and dust abatement in the mixing area and diverse metering equipments for additives, colours and water
|
|
Engineering control machine plus PLC duplex system control are adopted for this series of the plant, so as to ensure high reliability;
Several dozens of thousands of proportion of mixtures have been stored that can be randomly transferred.
3-Dimensional animation analogue display is adopted for the whole process of each device status, accompanied with sound and light alarm devices as accessories.
17-inch high-definition and dual displayers display monitoring system and data management system, respectively.
Comprehensive and systematic management system of commercial concrete batching plant makes control and management of the whole equipment reach the domestic advanced level.
|
|
|
|
Concrete plants, Concrete mixers, Concrete pumps,...
