|
|
| Products 91 to 120 of 152 |
CARMIX 3.5T4
Drum Capacity 4.750 l
Concrete output: 3,5 m3 per batch
Productivity: 4 cycles/hour
Transmission: Bosch Rexroth. 4 wheel driving
Engine Diesel PERKINS 1104C-44TA Turbo, water-cooled, 4 cylinders
The mixing unit is slewing hydraulically through 300° for high discharge over 2 m to the four sides of the vehicle
Front cab on side of loading shovel. ROPS-FOPS type complete of double closing door
4 wheel steering
Electronic weighing system (on request)
|
|
CARMIX 2.5
Drum capacity: 3400 liters
Concrete output: 2,5 m3 per batch
Productivity: 4 cycles/hour
Transmission: Bosch Rexroth. 4 wheel driving
Engine: Diesel PERKINS 1104 C-44 water-cooled, 4 cylinders, 85 HP
The mixing unit is slewing hydraulically through 300° for high discharge at 1,9 m to the four sides of the vehicle
Front cab on side of loading shovel. ROPS-FOPS type complete of double closing door
Electronic weighing system (on request)
|
|
CARMIX 5.5 XL
Drum Capacity: 7.600 liters
Concrete output: 5,5 m3 per batch
Maximum speed: 33 km/h
Road transfer from 0 to 30 km/h
Transmission: Hydrostatic, Hydromatic-Rexroth. 4 wheel driving
Engine: Cummins Turbo-Diesel B5.9 TAA, 150 HP
4 wheel steering
ROPS-FOPS driving seat complete with double closing door
Weighing: Electronic System. “Load Cells” acting on the drum, display and printer in the cab (on request)
|
|
CARMIX ONE
Drum Capacity: 1400 liters
Real concrete output: 1 m3 per batch
Articulated chassis
Hydrostatic transmission. 4 wheel driving
Engine: Diesel Cummins, A1700 water-cooled, 37 HP
Reversible seat with automatic inversion of hydraulic steering circuit. ROPS-FOPS Canopy
|
|
AUTO CONCRETE MIXER. MAX. WORKING LOAD: 1.000 LITRES. ENGINE: 50 H.P. TRANSMISION: HYDROSTATIC. SWIVEL CABIN.
Auto concrete mixer. Single drive. Hydrostatic transmisión. Perkins diesel engine, model 404 C, four cylinders. 50 H.P. Water cooled. Hydraulic steering. Hydraulic brakes. Electrical start and stop. Mixing drum volume: 1000 L. Front and loading. Swivel cabin. Water self-supplying (300 litres) by automatic suction pump and litres meter (200 l/m). Aceleration level. Cleaning equipment. High pressure pump with pistol. Flashing beacon. Conductor’s protective ceiling. Hour meter. Audible reverse warning signal. Safety belt.
|
|
Merlo self-loading concrete mixers: all the benefits of a tried and tested technology that is both economical and efficient for concrete preparation, transportation and casting.
Merlo has forty years of experience behind it in the design and manufacture of self-loading concrete mixers, and offers a complete range to meet every kind of operational requirement. The DBM range permits the rapid preparation of various types of concrete mixes, from the most fluid mortar to low slump concrete, in the precise quantities required and just when needed, the advantages being clear as compared to the traditional pre-prepared concrete.
|
|
|
|
|
|
Stetter Light Line
An optimised drum geometry and arrangement of the mixing spirals as well as additional weightreduced
equipment are the reason for an extremely light mixer body. A payload of up to 8 m3 concrete
can be reached in combination with “low-weight” 4-axle vehicles.
The new mixing spirals which a patent was applied for enable the application of the higheststrength
wear resistant steels available in the market.
Beside a higher payload, this does also mean a substantially longer lifetime compared to all
known light-weight versions. For economic transport of concrete over many years.
■ Drum walls made of high-strength wear resistant steel with a hardness of approx.
300 HB (Brinell)
■ Mixing spirals made of hardened high-strength wear resistant steel with a hardness of approx.
500 HB (Brinell)
■ Wear protection (5/6 mm) made of hardened high-strength wear resistant steel with a
hardness of approx. 550 HB (Brinell)
The result:
■ Approx. 10 % more payload
■ Extremely extended drum lifetime
■ Most economic transport of concrete
|
|
|
|
|
|
|
The mixing hopper is made of heavy-gauge steel sheet. It is supported by two axles with four wheels that run on two guides and it is moved by two hydraulic cylinders. Inside the hopper is lined with wear-proof material subdivided into interchangeable parts. In the top part of the hopper there is the loading mouth which during loading and mixing is hermetically sealed by rubber seals in contact with the bottom part of the batching hoppers, thereby preventing dust and splashes of concrete from coming out. An inspection gate has been created on the top to view the mix. The discharging mouth is mechanically operated. During working operations it is in the middle-top part of the mixer, during unloading the tank is moved outwards and rotated to bring it down. The mixing shaft is formed by flanged arms carrying the semi-helix-shaped blades. The blades are composed of a fixed support and an interchangeable part subjected to wear. The rotation axle rests on a support subdivided into two completely separate parts. The outer part contains the bearings (on which the shaft turns). In the inner part of the mixer a set of labyrinth oil-bath seals are fitted to prevent material from coming out during mixing (automatic and manual greasing). An oil-bath reduction unit powered by a fluid power motor turns the shaft. The single-axle mixer (the heart of the system), owing to its operating system, can mix the various types of material with different specific gravities, such as light concretes, expanded concretes, expanded clay, polystyrene, sandy mixes, mortars and concretes of all classes (from S1 to S5 with no difficulty whatsoever). Owing to the layout of the helix-shaped blades which create a flow and a backflow, movement of the material inside the mixing case takes place by continuous lifting/overturning together with movements from right to left and vice versa. As may be easily understood and demonstrated, this type of motion is the most effective and allows the mixing of materials that differ from one another, both in terms of specific gravity and class (at the most the mixing time changes). In the case of very wet concretes (class S5) or with higher mixing time than standard, with this mixer no adverse effects take place on the material (segregation of materials) and no grout comes out of the discharge mouth, as occurs in other types of mixers with the outlet located in the bottom part during mixing. In addition, also with very dry concretes (class S1 ? slump 2/3) the effect of overturning the material warrants the quality of the mix.
|
|
2019 Washing platform for concrete buckets
Robst steel construction for cleaning diverse concrete buckets. The raised floor guarantees the ideal working height for washing. With access ladder, safety rail and non-slip grid.
Options:
any colour
with your logo
galvanised
|
|
Trailer Mounted Concrete Pumps
The Putzmeister trailer concrete pumps are based on technical pioneer achievements. They keep attaining new records in high-rise and long-distance conveying - and have been doing so for over 30 years!
|
|
BSA 14000 HP-D
high performance pump for which there are almost no limits.
Power kW - 365
Weight app. kg - 9600
Output m³/h - 102 / 70
Pressure bar - 150 / 220
|
|
|
The first product in China that has passed CE certification conducted by third party The products has passed ISO9001-2000 quality management system certification The products has passed ISO14001 environment management system certification The product has passed GB/T20081 occupational health safety management system certification
|
|
BETON MASTER PLUS
PUMP FOR CONCRETE AND SHOTCRETE
Controlled-valve, variable-displacement two-cylinder pump.
|
|
PRO H CLB
BOMBA DE TORNILLO PARA BOMBEO DE HORMIGÓN Y GUNITADO
PRO H CLB es la solución diseñada para el bombeo de grandes volúmenes de materiales mezclados.
|
|
BETON MASTER
PUMP FOR CONCRETE AND SHOTCRETE
BETON MASTER is the ideal solution for pumping concrete, micro-concrete, mortar and shotcrete.
|
|
Truck Mounted Concrete Pumps
Product Range The product range of Putzmeister Concrete Pumps covers all fields of applications starting with the small, versatile concrete pump and ending with the concrete pump with the highest reach and best manoevrability. There are available a Trunk- or S-Tube-system pumps with different equipment. The main chassis used are MB-Atego, MB-Actros and MAN. Other chassis are available on request.
|
|
|
The BOOMIX® truck mixer pumps are a high-quality and functional concrete casting system. Each detail is thought-out, designed and built for operating the truck-mounted pumps in perfect harmony with the frames of the vehicles designed to carry them. The accurate design and the use of special steels guarantee a sturdy structure with a high resistance to wear.
|
|
The name PUMI comes from Pump and Mixer. It places small amounts of concrete within the shortest of time and at lowest costs.
The PUMI transports concrete like a common truckmixer. And - on the construction site - it pumps and places the material like a truck mounted concrete pump.
The advantages of the PUMI at a glance:
Ideal for small and average-sized construction sites.
Driven and operated by one and the same person.
Truckmixer, pump and placing boom as a compact unit.
This means for you new markets, more profit and the guarantee for future turnover
Minimum space requirement
|
|
FBP truck mixer pumps are the ideal completent to a fleet of concrete pumps and are always ready for a trip to the smaller jobsites. They not only bring the concrete to site, but also pour it into place. SCHWING-Stetter FBP truck mixer pumps are available in various sizes and configurations. But all of them with genuine SCHWING-Stetter quality, efficiency and robustness built in.
- 24 m boom with 125 mm pipeline, or 26 m boom with 100 mm line
- Long-stroke pump cell means low cycle frequency and minimum wear
- Pump cell fitted lengthways under the mixer drum
- Featuring the SCHWING "Baby ROCK" – economical, strong, re-buildable
- Minimum rear overhang and increased ground clearance and gradeability
- Proportional boom controls
- Fingertip-easy radio remote control for pump and boom
- Level sensor in hopper prevents overspill
- Robust outriggers fully protect the jacking cylinders
- 4 m end hose
- Super 2000 pipeline as option
- Short rear deflector bumper for optimum skip filling
|
|
|
The new XOLID M536 trucked pump, top quality, sturdy, reliable and safe, ranks at the top of the production technology of the Concrete Machinery Division (Machinery and equipment division for the production, transport and laying of concrete) of the IMER Group.
|
|
|
|
Concrete plants, Concrete mixers, Concrete pumps,...
