|
|
|
|
|
|
YG500
Underground Hydraulic Diaphragm - Wall Grab
The internationally-advanced powerful large-torque electrically-controlled direct-injection turbo supercharging inter-cooler Cummins QSL9-325 is adopted to ensure high reliability and fuel economical property and meet the phase-III emission standard of non-highway motor vehicle of Europe and America.
The constant power of power system and hydraulic system is fitted perfectly to maximize working efficiency of complete machine.
The internationally-famous hydraulic system and hydraulic element with stable and reliable performance are adopted.
The construction system with perfect CAN-BUS and LIN bus technology is adopted.
Compared with mechanical pipe-reeling device, the hydraulic pipe reeling device with the design of constant tensile force has compact structure, occupies small space, needs not disassemble, reduces the maintenance time, improve working efficiency of complete machine and effectively ensure synchronous working of various actuating mechanisms.
The multifunctional large display screen with high resolution can give 24-hour display of operation data of complete machine; the system can calculate record and save the operation process of grab bucket.
The lifting speed of grab bucket is quick; the grab bucket is allowed to be fitted with free falling speed reducer; the grab bucket can open/close every 6.8s; the closing force of grab bucket is large to improve working efficiency.
The design of long guiding and low center of gravity is adopted for grab bucket; the supplementary tooth is fitted to balance the torque when operation and reduce the deviation.
|
|
|
|
|
|
YTQT350underground diaphragm wall grab is a new product developed by this company by absorbing both domestic and international advanced technologies upon the demand of the deep foundation construction.
YTQT350 underground diaphragm wall grab consists of hydraulic system, monitoring system, guiding device, grabbing device, and hydraulic driven system. The semi-guiding grabbing device can rotate by 180 degrees at will. During the operation, the free rotation is allowed no matter which direction the machine is at so as to change the positions of the grab and to fit the grab into the groove easily and quickly.In terms of working technic, it excels hanging type grab. Moreover, the advanced hydraulic driven system has been applied, with independent filtration, which will offer you a cleaner and more stable working system. The grabbing device is made of high-strength alloy steel plate, characterized by strong breakout force and high solidity and durability. The auxiliary main body of the grab is theYTQU55 hydraulic crawler crane, with the single line pull power of the winch being 9-18 tons, which can be also used as a powerful crane.
|
|
FD90 hydromill - Technical Data
- Depth of excavation: 100 m
- Width of trench: 800 ÷ 1500 mm
- Lenght of trench: 3200 mm
- Torque at the wheel axle: 2 x 90 kNm
- Wheel speed: 0 ÷ 27 rpm
- Capacity of mud pump: 450 m³/h
- Mill weight: 52000 kg
|
|
FD60 on Mast - Technical Data
- Depth of excavation: 125 m
- Width of trench: 700 ÷ 1200 mm
- Lenght of trench:3130 mm
- Torque at the wheel axle:2 x 67 kNm
- Wheel speed: 0 ÷ 31 rpm
- Capacity of mud pump: 450 m³/h
- Mill weight: 33000 kg
|
|
|
|
|
|
Baya is the 3rd generation of hydraulic grab and has been tested numerous times in order to improve the drilling rates, which are the best available on the market, today.
It combines the advantage of the pendular grab (versatility) with the Kelly system (performance and quality).
Use
Baya can be used to construct diaphragm walls or prefabricated walls, cut off diaphragm, oblong piles etc… Baya drills up to great depths, into a large range of grounds (silt to strong sandstone with Rc 100 bar). Clients use Baya where they used hydromill before.
Versatility
Its erection is quick, and so is its dismounting with its cardan system and its quick transport kit, which allows carrying the boom elements at the same time.
Baya has a large range of drilling widths from 19.7’’ to 59’’ and a large range of drilling lengths from 106.3’’ to 165.4’’, thanks to the fast interchangeable elements.
Performance
Thanks to its penetration coefficient and its closing force, Baya’s energy is the most powerful in the world, and allows drilling into harder grounds or drilling more quickly.
Thanks to its Kelly and motorised turning joint, Baya can go into the drilling trench very quickly or can empty its bucket above a truck very easily. Finally, the automatic half turn allows better verticality. Baya’s clamshells are all equipped with one chisel allowing better penetration into hard grounds.
Safety
The assembling systems of the different elements are simple and quick, assuring work with safety.
|
|
With an innovating style but serviceable integrated, BAYA compact is mainly very fonctional, robust, with a high capacity grab, with a high cutter force, breifly a very hight efficiency. BAYA compact has been designed to increase the mud circulation and to reduce the maintenance costs.
Powerful, compact, modular to comply with all the drilling need of diaphragm walls or barettes , BAYA compact can drill down to 70 m depth. BAYA compact is equipped with an incorporated chisel to cut the hard layers.
|
|
INOVA Geotechnical drill rig
Designed for geotechnical activities, geothermal and water well drilling, the INOVA is a powerful drilling tool that's meant to drill hard. Its double threaded injection swivel ensures great versatility in order to be able to switch simply from one drilling technique to another without critical time losses. The INOVA can drill diameters up to 315 mm and its rotary head is equipped with a triple hydraulic engine.
|
|
GEOTHERMAL DRILL RIGS
HBR 504 GT - Technical Data
-Engine power: 147 kW
- Width of crawler: 2065 mm
Mast:
- Stroke of rotary head: 2970 mm
- Extraction force: 100 kN
- Crowd force: 50 kN
Clamps:
- Diameters: 68 ÷ 254 mm
Rotary head:
- Torque: 19 kNm
- Drilling speed: 102 rpm
Weight:
- in working condition: 12500 kg
|
|
GEOTHERMAL DRILL RIGS
HBR 205 GT - Technical Data
- Engine power: 147 kW
- Width of crawler: 2500 mm
Mast:
- Stroke of rotary head: 4700 mm
- Extraction force: 200 kN
- Crowd force: 100 kN
Clamps
- Diameters: 68 ÷ 254 mm
Hydraulic drifter
- Torque: 6,3 kNm
- Speed range: 80 rpm
Weight:
- in working condition: 17200 kg
|
|
|
The DRILL 1200 unit is the powerful rig suitable for multi-directional drilling operations. The machine is designed for soil consolidation applications, micro-piling operations, core drilling, tie-rods, water wells and jet grouting.
|
|
HARDAB Series
One man drill rig operation with 670 ft (200 m) of drill pipe on board
Drilling applications: Geothermal drilling and water well
HARDAB 5000
11 000 lbs (5 000 kg) pull back
HARDAB 7000
15 400 lbs (7 000 kg) pull back
Great advantage
One man operation (no helper needed)
Pipe handler 670 ft (200 m) in 22 min.
670 ft (200 m) of drill pipe on board
Rotex overburden casing system
Cutting discharge collection system
Angel drilling capacity (45º to 90º)
Track mounted rig
Radio remote controlled crawling
|
|
Type TB 1300 V
Load max. 130 t
Operating load 100 t
Mast height (of 18m-leverage) 34 m
DEUTZ desk engine Power 400 kW
Rotary table load max. 150 t
Drilling depth max. 2800 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle
|
|
Type TB 1600 V
Load max. 160 t
Operating load 130 t
Mast height (of 18m-leverage) 36 m
External engine unit Power 2x400 kW
Rotary table load max. 200 t
Drilling depth max. 3500 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle, third
|
|
Type TB 1800 V
Load max. 180 t
Operating load 160 t
Mast height (of 18m-leverage) 36 m
External engine unit Power 2x400 kW
Rotary table load max. 320 t
Drilling depth max. 2500 m
Licence, dimensions and weight, explosion protection according European regulations
Acceptance acc. API
Full hydraulic lifting equipment
Supply of rotary table and auxiliary power unit
Computer aided electrical control
100 kW-vehicle drive as emergency generator
Vehicle: ACTROS series with 4 axles, lengthened, driver´s cabin deeper, steerable lag-axle, third front axle
|
|
Soil investigations
A new range of hydraulic geotechnical rigs, mounted on crawlers or trucks. All machines are equipped with high speed rotary heads for diamond cores.
|
|
HCM GEO
This is the only attachment offered for geothermal installation. The base machine for this drill must be the largest of skid steer models with 100 HP engine, rubber tracks and a weight around 10,000 lbs.
Using the same mast and rotary head as the DrillAll GEO the HCM GEO allows the contractor to utilize a skid steer loader on site for all phases of geothermal loop installation. Including digging manifold pits, trenching between bore holes, pallet forks for moving grout and grout plants as well as the bucket to clean up after the job is finished.
Offering the use of 10-foot drill pipes and casing this rig is capable of drill holes up to 200 feet in depth and up to 5-inch diameter. There are two stabilizers built into this attachment to better stabilize the mast during the drilling process.
|
|
DrillAll GEO
The DrillAll GEO was designed for limited access drilling in the retrofit geothermal market. It is well suited for installation of the DX copper loops offering 45-degree tilt in the mast. This allows the circular hole pattern of DX to be drilled out only moving the machine one time. To accommodate the high angles required for DX installation the mast uses 5-foot drill pipes.
For GX installation the DrillAll GEO can be fitted with a mast using 10-foot drill pipes while limiting the mast angle to +- 5 degrees. In this configuration the DrillAll can accomplish the 200-foot holes required for GX geothermal.
This is an excellent machine, built entirely at our Montrose facility it is a powerful drill packed into a small package.
|
|
New sources of energy
The increasing scarcity of fossil fuels coupled with the ever growing energy consumption forces us to continuously search for new sources of energy. One of these new sources is geothermal energy. This technology uses the fact that the temperature underground is steadily rising with increasing depth. The heat from the soil is transferred to a transport medium, circulating through flexible tubes.
The tubes are installed in the bore holes. The depth of the bore hole varies depending on the application and the required KW-rating. Common depths for private use range around 50 meters. Commercial applications require depths of up to 2500 meters. Heat exchangers either use the temperature of the medium directly or transform the heat of the medium into electrical energy.
|
|
|
|
|
|
Astec DD-65 MiniMax
The Astec EarthPro Series DD-65 MiniMax is the perfect choice for contractors who want a maneuverable machine that can access the jobsite in a variety of conditions without sacrificing productivity. It provides 6,000 pounds of thrust/pullback force and is capable of up to 500-ft-lbs of rotary torque with a maximum rotary speed of 180 rpm.
Astec DD-1416
The DD-1416 is a compact drill packed with innovative features that make it a pleasure to operate. It features dual rack-and-pinion drive for easy, dependable operation and offers 14,000 lbs of thrust/pullback with up to 1,600 ft-lbs of rotary torque with a maximum rotary speed of 200 rpm.
Astec DD-2024
The DD-2024 provides 20,000 lbs of thrust/pullback force with the capability of up to 2,400 ft-lbs of rotary torque. The maximum rotary speed can reach up to 200 rpm. The drill weighs 10,500 lbs., and is 207 inches long by 51.5 inches wide. The DD-2024 is powered by an 85-horsepower Cummins turbocharged diesel engine.
Astec DD-3238
The Astec® EarthPro™ Series DD-3238 offers contractors the power and features of a much larger unit with the mobility and flexibility to fit onto any jobsite in any environment. It offers 32,000 lbs of thrust/pullback force with the capability of up to 3,800 ft-lbs of rotary torque.
|
|
|
The trenchless Horizontal Directional Drilling technology makes the laying of supply lines and pipelines underneath rivers, countryside and towns fast, economical and environmentally friendly. Herrenknecht Maxi and Mega Rigs are versatile specialists for underground pipelines and cable ducts.
|
|
TERRA-JET
7520 D
Pullback force: 20 to
Torque: 7750 Nm
drilling fluid volume: 185 l/min
drilling fluid pressure: 85 bar
Drilling length*: 400 m
Backream-Ø*: 800 mm
drill rods: 3 m
With automatic control ADBS
|
|
TERRA-JET
4015 S
Pullback force: 15 to
Torque: 4000 Nm
drilling fluid volume: 90 l/min
drilling fluid pressure: 70 bar
Drilling length* 200 m
Backream-Ø*: 460 mm
drill rods: 3 m
With automatic control ADBS
|
|
TERRA-JET
3213 D
Pullback force: 13 to
Torque: 3'200 Nm
drilling fluid volume: 87 l/min
drilling fluid pressure: 72 bar
Drilling length*: 200 m
Backream-Ø*: 420 mm
drill rods: 3 m
With automatic control ADBS
|
|
|
A world of grinding innovation from the global tree leader. Vermeer horizontal grinders are built tough and offered in a variety of configurations to suit large land-clearing and municipal waste operations. Trailer-mounted units are towable behind dump trucks or other trucks; they feature extra-long feed tables and adjustable-height hitches. Self-propelled track grinders are highly maneuverable and are able to work at uneven job sites and land-clearing projects. For increased efficiency, the track grinder can also drive between material piles. All horizontal grinders feature remote-controlled operation, an exclusive feed system, the patented Vermeer Duplex Drum and many other productivity-enhancing features
|
|
|
Increasing sensitivity with regard to protection of the environment, noise abatement and minimum disturbance to traffic flow and production processes demands new ways of establishing infrastructure. Here, with the Power Bore Types PB 50 to PB 250, WIRTH offers a complete series for Trenchless Technology up to a bore length of 1800 m.
|
|
Within the family-operated Ditch Witch organization is the family of horizontal directional drilling (HDD) systems, designed and built by Ditch Witch engineers to work together with unbeatable efficiency. Components include the drilling rig, fluid management systems, the drill pipe itself, and integrated electronics that enable the tracker operator to disable power to the drilling unit's thrust and rotation. As families go, Ditch Witch HDD systems are the most functional in the underground construction industry.
COMPACT
Compact Ditch Witch directional drills are designed for easy setup and outstanding productivity in tight spaces.
MACH 1
Patented Mach 1 technology takes the guesswork-and the manual labor-out of pipeloading, drilling and other functions.
ALL TERRAIN
Patented Ditch Witch All Terrain technology is simply the most productive rock-drilling system available.
|
|
|
|
|
|
Rod Burster - Hydrocrack
The TERRA-HYDROCRACK is a hydraulic cracking system to renew gas pipes, water pipes or sewerage lines. Due to its high thrust and pullback forces of 600 kN (60 tons) it cracks or cuts PE pipes, steel pipes, cast iron pipes or even ductile cast iron pipes from ø 50 mm to up to 350 mm. New HDPE pipes up to OD 355 mm may be pulled in. In a first step, the highly sophisticated rods are pushed through the old pipe. As soon as the rods arrive at the target pit, a 3-wing bursting rod, an expander cone and the new PE pipe are assembled to the rod. Now the TERRA-HYDROCRACK pulls the rods back, cuts the old pipe into 3 slices, enlarges the bore channel and pulls in the new PE pipe – all simultaneously. It is even possible to push the rods into a second pipe section, whilst the new pipe is pulled in into the first pipe section. This saves time.
The main cylinder with hollow piston rod can be moved inside of the trench box from the front to the rear. This allows to pull the bursting tools and the new HDPE pipe completely into TERRA-HYDROCRACK after the pull-back operation. Therefore it is not necessary to move the whole machine. It is possible to work in both directions of the working pit without turning the machine. Whilst the HDPE pipe is pulled into the first section, the rods may be pushed simultaneously into the second old pipe section.
The Automatic Foot Control AFC allows to operate the TERRA-HYDROCRACK with a foot pedal. As long as the foot pedal is pressed down, the main cylinder works. The foot pedal is mobile and may be placed anywhere around the working pit.
|
|
|
Atlas Copco offers a wide range of tophammer rock drills suitable for drilling blast holes, grout holes and holes for installing rock bolts. The COP range includes rock drills with an impact power of 11 up to 40 kW that are capable of drilling holes from 33 to 165 mm in diameter.
|
|
The demand for deeper and deeper diaphragm combined with
the stringent requirement for verticality makes the hydromill
technology.
The best option to tackle today’s needs.
The main advantages of Hydromill technology are:
• Ideal for deep walls
• Suitable for most of the soil conditions and ableto work in rock or hard formation
• Capable of correcting the verticality
• Possibility to have a real time monitoring system during the excavation
Thanks to the experience obtined by Trevi Group in over 25 years of operation with hydromill in job sites of Asia,
America, Europe and Africa, Soilmec has designed and manufactured a state of the art product to cope with new
and even more challenging projects.
The range offers several equipment and accessories :
• Base carriers
• Additional external power packs
• Drum or coils wheel arrangement
• Three sets of cutting modules H-5, H-8 and H-10
• Complete mud system
|
|
Drift Runner MTI - 1SB
The MTI SB Series single-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Drift Runner MTI - 2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner MTI - 1XSB
The MTI XSB Series single-boom hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner LONGHOLE
Hydraulic center articulated four-wheel drive unit for long-hole drilling in underground mines. It is designed for vertical plane rings, fans and rings.
Montabert HC
1964/1991 : more than 25 years of creativity and innovation. An unequalled experience in hydraulic drilling technique is now applied to the hydraulic drifters.
|
|
|
|
Drilling, Pile driving, Trenching machines
