|
|
| Products 121 to 150 of 184 |
K701 Power Yarder uphill/downhill
Built on vehicle
used truck possible(K701 Platform with own engine)
no auxiliary output (NMV) necessary
K701 platform
Tower
Mounted on a truck the height is approximately 12m
A tower extension of 2m is possible
Engine:
205 HP Cummins Diesel C Serie
Engine speed is controlled by a foot accelerator
Skyline drum
Driven by a separate oil motor with multiple disk brake and quick release for emergencies
Exact managing of skyline tension possible
Alle Funktionen werden direkt von der Kabine aus gesteuert
Line capacity
Skyline: 800m Ø22mm or 700m Ø24mm
Mainline: 850m Ø14mm or 1200m Ø12mm
Haulbackline: 850m Ø14mm or 1200m Ø12mm
Strawline: 1300m Ø6,5mm
Tractive forces
Skyline : up to 120kN in the tension section
Mainline: up to 80kN at average drum
Haulbackline: up to 80kN at average drum
Strawline drum
|
|
K507 Toweryarder uphill/ downhill
Built on vehicle
MAN 6x4 or 6x6 / 310HP
with electric engine management
with independent transmission output , hydraulic driven, pedestrian control
Tower Yarder K507
Line capacity
Skyline 1000m 20mm
Mainline 1400m 11mm
Haulbackline 1400m 11mm
Strawline 1500m 6mm
Tractive forces
Skyline: up to 120kN (to dose exactly with display)
Mainline: up to 63kN (43kN at average drum)
Haulbackline: up to 63kN (43kN at average drum)
|
|
K507 Toweryarder with grape crane uphill/ downhill
Built on vehicle
MAN 6x4 or 6x6 / 350HP
with electric engine management
with independent transmission output , hydraulic driven, pedestrian control
Toweryarder K507
Line capacity
Skyline 1000m Ø20mm
Mainline 1400m Ø11mm
Haulbackline 1400m Ø11mm
Strawline 1500m Ø6mm
Tractive forces
Skyline: up to 120kN
(to dose exactly with display)
Mainline: up to 63kN
(43kN at average drum )
Haulbackline: up to 63kN
(43kN at average drum )
|
|
K507 Toweryarder uphill/ downhill
Built on vehicle
MAN 8x6 or 8x8 / 480HP
with electric engine management
with independent transmission output , hydraulic driven, pedestrian control
Toweryarder K507
Line capacity
Skyline 1000m Ø20mm
Mainline 1400m Ø11mm
Haulbackline 1400m Ø11mm
Strawline 1500m Ø6mm
Tractive forces
Skyline: up to 120kN
(to dose exactly with display)
Mainline: up to 63kN
(43kN at average drum )
Haulbackline: up to 63kN
(43kN at average drum )
|
|
Item Performance
Max reach, open 1500mm
Min diameter, closed 450mm
Gripping tool width 1620mm
Max.dump height 2900mm
Max.dump reach 1360mm
Rated load capacity(kg) 1500kg
|
|
|
|
|
|
The Gremo 1050H is a reliable harvester ideal for thinning and final cutting. The new engine, strong as an ox, together with the big working pump produces sufficient hydraulic power for any imaginable situation. This means shorter working cycles and yet enough strength for operating in interaction the different functions. In other words: Better performance!
But, as you know, strength alone is not all. A harvester must also be flexible and safe to meet the requirements of forestry work. Therefore, we keep to our proven design with eight wheels. This ensures excellent forward movement and ideal load distribution also on rough and soft ground. (It is even possible to put tracks on all bogies).
The automatically actuated bogie locks are one of the secrets behind the outstanding lateral and longitudinal stability of the 1050H. Other assets are the low centre of gravity and the ideal load distribution in longitudinal direction. And owing to the bogielift a considerably smaller turning radius is achieved. Thus, our statement is justified: The 1050H is strong as an ox and nimble as a panther.
|
|
|
John Deere harvesters give you mobility with big-tree strength, and work productively in both dense stands and final fellings, as well as on the hillside. You have the choice of tracked or wheeled machines. No matter what model you go with, you can expect a comfortable work environment, easy maintenance, efficiency, and many productive days of work.
|
|
The 5H is a medium sized machine designed to handle thinnings and even smaller clear-felling. The 5H is now also available with the bigger Loglift L220V crane.
- Weight: 14 000 kg
- Width (B): 2450-2760 mm
- Power: 125 kW @ 2200 rpm
|
|
The six wheeled Logset 8H is a robust clear-cut harvester with power and stability for the most demanding conditions. The 8H enjoys a solid reputation for unbeatable productivity and fuel economy.
- Weight: 18 000 kg
- Width (B): 2780/2950 mm
- Power: 179 kW @ 2200 rpm
|
|
The 10H is one of the biggest purpose-built harvetsers on the market. The stability of the base machine with the strongest crane on the market is a big advantage when cutting big, heavy trees. The capacity of the double work pumps together with the high torque of the engine give new possibilities.
- Weight: 22 000 kg
- Width (B): 3000 mm
- Power: 220 kW @ 2200 rpm
|
|
|
|
|
|
In spite of its small size, the P0NSSE Beaver has the characteristic Ponsse forest machine attitude: A real powerpack, it can handle many different harvesting jobs, from the densest improvement thinning to the heaviest final felling. The greatest hydraulic capacity and the strongest crane in its size class combine with the stability provided by its low rigid frame, to form a total package that is not outshone even by its larger companions.
The Beaver's chassis structure, based on an extremely short wheelbase and free-floating portal axle, is an extremely agile all-terrain solution for the demanding conditions of first thinnings. Its ground pressure is evenly distributed, and, thanks to its strong, extendable crane, the residual timber stand sustains minimal damage. The Beaver's technology is based on simple, powerful solutions, many of which have been directly adapted from the larger class-size Ergo harvester. It has indeed proven itself an extremely dependable partner that produces results tirelessly day in, day out.
|
|
PONSSE BEAR IS AN EXTREMELY POWERFUL AND PRODUCTIVE HARVESTER EQUIPPED FOR TOUGH CHALLENGES OF PROCESSING LARGE WOOD OR DEALING WITH REGENERATION HARVESTING.
The PONSSE Bear harvester offers extreme performance for heavy weight timber harvesting. Its key strengths include unparalleled motor and hydraulics efficiency, Ponsse's most powerful crane ever and the durable PONSSE H8 harvester head providing unequalled performance. Thanks to its usability and reliability, the new PONSSE Bear exceeds all the special demands that accompany a first-class harvester...
|
|
|
PONSSE Ergo is clearly the most powerful harvester in its size category. The power is based on double circuit working hydraulics powered by a strong Mercedes-Benz diesel engine. One of two large-capacity pumps supplies oil for the crane movements, while the other is dedicated exclusively to harvester head operations. The system enables the use of many simultaneous movements and operations without movement speed changes that complicate work. With Ergo's control unit, harvester operators can take full advantage of all their skills, unconstrained by limitations imposed by the basic machine...
|
|
The Prentice 2510 wheel harvester is a purpose-built forestry machine incorporating field-proven components and state-of-the-art manufacturing processes that produce the quality synonymous with the Prentice brand.
Unique features include the front-entry cab for easy entry and egress and a leveling platform, which can level in all directions.
The cab and the boom sit on the platform, which gives the operator optimum visibility of the work area. A wide selection of factory-matched Prentice harvesting and processing heads are available.
|
|
ROTTNE H 20 - the large clear-felling harvester!
ROTTNE H-20 is a very competitive harvester, built for exacting final felling and heavy forests, with a top class driver environment. The robust steering joint with its high steering force has the horizontal joint towards the rear of the machine where the articulated frame lock,consisting of two cylinders, is integrated. The loader is developed for a large harvester and is extremely powerful in both lifting and swing functions. The large head with supporting wheel arms and five feed rollers grips stems securely and effectively transfers the high tractive force.
|
|
|
|
|
|
Rottne H-14 an operating experience!
ROTTNE H-14 has a turbo engine of 225 hp with a common rail injection system and 4 valves per cylinder. The hydrostatic transmission with two mechanical gear stages works smoothly and willingly with a high tractive force, which gives the harvester excellent operating characteristics.
The modern harvester cab offers superb driver comfort with air-sprung seat, wide armrests with lever panels that are individually settable as well as air conditioning with ACC control. The driver has fantastic all-round visibility as the cab can be swivelled and levelled and he determines himself whether this is done automatically via the IQAN computer or manually via the joystick.
Automatic cab swivelling means that the cab gradually follows the loader’s swing
movement to the left or right sides. In addition to the lever panels, the cab also features manoeuvring buttons and controls well placed on the instrument panels on the side and in front of the operator.
The new swing base, which is adapted to the H-14, has given the popular harvester loader RK 140 a greater swing force as well as a larger forward tilt angle. The new extension with a maximum stroke of 3.2 meters, has a cylinder with integrated fast speed valve and a stroke length limiter that is controlled by the size of the head mounted on the harvester. EGS 590, which is a new head, has a maximum cutting diameter of 60 centimetres and stem feed with 3 feed rollers. The 2 moving feed roller arms swing in towards the frame so that these rollers press the stem against the 3rd feed roller located inside the head frame.
|
|
ROTTNE H-8 superb in terrain!
ROTTNE H-8 is an ideal harvester for standoperating thinning and with different route systems it can handle strip road distances of up to 35 metres without manual intermediate zone felling.
In the comfortable cab with large windows, the operator has the best possible prerequisites to make species selection within the full working area of the loader. The loader, which is parallel controlled, has well balanced geometry and in combination with the harvester’s excellent stability, processing can also be performed at full loader reach.
|
|
The Sampo Rosenlew 1046/1046X forest harvester has been in production since 1996. The harvester has been continuously developed and it is now environmentally friendlier as well as more ergonomic and efficient than ever.
The weight and dimensions of the SR1046X have changed only little along the years. Thinning specialists at Sampo Rosenlew understand that a harvester intended for first thinning in young forests must be of this size.
Window area is large offering an excellent view to the operator over the treetops and around the machine. The cab is spacious, ergonomic and comfortable. There is enough space for the tallest operator to operate comfortably and room for all the necessary personal items.
|
|
The harvester model SR1066 was launched in 2003. It is designed especially for later thinning. The weight and dimensions of the SR1066 are designed to handle heavier trunks easily and efficiently. This machine also performs outstandingly in final cutting.
The SR1066 harvester can be equipped with the latest PC based controlling and measuring technology as well as with the GPS and data transfer systems. The cab on the Sampo Rosenlew forest harvester is spacious and comfortable. It is located on the front frame. The curved windscreen and the high cab provide the operator with an unhindered view over the trees and round the machine. The controls are ergonomically within easy reach.
The Sampo Rosenlew harvesters are equipped with SisuDiesel engines. A six-cylinder turbo diesel generates 129 kW of power. The engine supplies power to hydraulic pumps, which transmit power to high torque hydraulic motors.
|
|
The TimberPro TB 830 and TB 630 are the only wheeled machines in the world designed to handle larger cutting attachments like the Log Max 9000, Risley Rolly II and Quadco disc saws. The TimberPro line of wheeled harvester and feller bunchers are proven to increase production especially
on rough terrain or when cutting scattered timber. The TimberPro line of machines come standard with 360° continuous rotation allowing the operator to always face his/her work. This feature also gives the operator the ability to harvest timber 360° around the machine. Including the option to work over the rear of the machine just as well as the front.
|
|
Woods chippers for production of wood chips : NATURA
- Models : 6 models for hopper opening from up to 350mm,
- Coupling : adaptable on a 3 point linkage or road trailer for autonomous use with a diesel gas engine,
- System : 2 great diameter hydraulic rollers easily drive the woods,
- Cutting device : 3 high strength blades fitted on a disc,
- Safety : the design of the machine itself is safe and a bar protects the hopper. "NOSTRESS" electronic device. Machine complies with the European norm,
- Wood chips : production of chips of 7.10mm and 13mm.
|
|
FORESTRY CRUSHERS
Conceived in parallel on the rotors of the BPM and OBL' X, the BFL receives a wide selection of pieces of wear, ( 6 models) which decomposes into three ranges: wood, wood + stones, stones.
The helical assembly of its masses on the rotor, allows it to work with a constant effort and to avoid any impact. As on the BFL, to avoid any fatigue of the transmission, the case dismissal of angle remains parallel to the release of the tractor. The frame is directional hydrauliquement since the post of driving and allows a big user-friendliness. The range BF are conceived for powers of 160 in 600 CV. The transmission of the rotor is made either by belts or vertical gearbox mounted on shock absorber
|
|
The Kesla C4560 drum chipper is the perfect solution for professional chipping, both for entrepreneurs and for the industry. Due to its modular set-up structure, it can be equipped with appropriate features to satisfy the user’s requirements: chipper, chassis, axle, drive, a 16m³ container, crane and industrial versions. A 296hp independent engine model is also available. The output is up to 160 m³ per hour and both circular timber and sawing waste can be used.
Available accessories: forest machine cranes (F600-F700), energy heads (E15 ja E20), scales, camera solutions and different drive options.
|
|
Advantages at a glance
* aktive feed with pre-compression due to two horizontal and two vertical feed drums
* two principles of chipping: high speed for pruning, lower speed for wood trunks
* large chipping rotor (1050 mm) for precise cutting – even with strong wood trunks
* innovative options: hydraulic wood splitter and re-sharpening mechanism
|
|
The Reinbold RHZ series now incorporates even more refined details: three infeed rollers and special rails improves material infeed and makes loading the machine easier.
Other features include:
Rugged, safe design (no danger of crushing), very easy to operate, various feed versions, easy access for easier servicing...
|
|
The compact high-powered shredders of the RLZ series with angled intake are used in medium-sized plants and carpentry shops for the disposal of long, narrow timber waste, such as strips and battens, right alongside processing machines.
Reinbold machines are renowned for their rugged construction and guarantee reliable and profitable operation with good throughput rates.
|
|
Wood Chipper
Compact machine designed for high yield pruners, powerful motor - cylinder CHD 40 hp diesel engine
|
|
|
SB 20 and SB 25 These compact machines are able to chip branches from 21 to 26cm in diameter according to the type of wood concerned. Highly effective, they are equipped with 6 reversible knives placed flat onto the wheel. A wide, approved hopper offers safe and easy loading of branches
|
|
Sawmills, furniture industry,veneer works.All types of round wood uprnto 45 cm thick and 80 cm long, pallets,bark, packing material, end pieces, off-cuts.
Specifications
intake opening: 450 x 350 mm
rotor speed (rpm) approx.: 650-820 rpm
drive: 55-90 kW
no. of tools: 2-4 unit
dimensions of the rotors: 700 mm
weight approx.: 3.250 kg
|
|
Drum chippers with horizontal input for the production of high quality chips for raw material, to produce chipboard, paper, wood pulk and fuel. Used directly in the production line in sawmills for the evacuation of residue wood. Chipping knives secured by the reliable VECOPLAN centrifugal wedge system.
Drum Chipper
Throughput capacity up to 2.000 kg/h. Used in sawmills and carpenters workshops, for long pieces of waste. Pneumatic chip evacuation. Also available with U-Rotor and cutting-tools.
|
|
|
|