|
|
Fairfaced concrete Formwork T.Form
Formwork for concrete surfaces with high aesthetic requirements
* Extremely few holes for ties (0,48 holes for ties per m²)
* Few accesoires
* Integrated locators for platform brackets and adjustable props
* Optimal exposed concrete quality by plywood screwed from the girder site
* Reduction of transport volume is possible by on site assembly
* Ideal alternative for wodden girder formwork
Panel widhts (cm): 240 / 180 / 120 / 115 / 110 / 105 / 100 / 95 / 90
Panel heights (cm): 350
Frame depth (cm): 24 with 36,7 without walers
Plywood: 27 mm birch plywood, scarf jointed
Max. concrete pressure: 90 kN/m² according DIN 18218
Tolerances of deflection: According DIN 18202, table 3, line 6
|
|
Aligning struts
For the precise aligning and fixing of concrete components and formwork, we supply aligning struts in a variety of designs and sizes. Our smallest and extra-handy aligning strut made of steel can be extended from about 2 m to 3.3 m, while the largest has an extension range of 5.3 to 7.6 m. In addition, we now have the SUPER 10 in our product range, the aluminum strut with an extension range of about 7 m to 10.25 m – unique on the market and ideal for extra-big tasks. The SUPER 10 telescopes at both ends and is finely-adjusted with a screw thread
|
|
Proping Megashore aluminum
Aluminum proping is a system entirely flexible and adaptable to all the configurations. This product is ideal to take again important loads going up to 100 kN for some 0,50 m heights to 15 m and more.
It is composed of 4 principal elements: stays, spillplates, jacks of stays and frameworks of wind-bracing.
The stays are light and couplables between them. Their adjustment is simple and fast. They can-being assembled via frameworks of 8 different sizes.
According to the application, this system perhaps compatible with the beams Titan T (see heading COFFRAGE>COFFRAGE HORIZONTAL>Les beams out of aluminum TITAN T).
It also supplements the two systems of horizontal formwork traditional HV (of the primary beams assembled with the secondary aluminum beams and of the primary beams assembled with the famous panels Combi HV) in the case of casting with great height or of very thick flagstones.
|
|
Triplex R
is a brace for wall heights of more than 6.00 m, provided with a formwork connector and a foot plate.
Triplex SB
is an additional static support for high single-sided formwork (> 6.00 m) when support frames STB 450 and height extensions 150 are used.
|
|
Aluminum beams TITAN T
The aluminum beams TITAN T are used for the formwork of concrete slabs and for the proping of prédalles.
With these beams, you exploit to the maximum the advantages of aluminum.
They are light and resistant.
Advantages of the system
The beams TITAN T have an extreme longevity compared to wood
No cutting on the building site
Insensitivity to the falls and the bad weather
Clouability
The quantity of unusable beams at the end of the building site is lower than 1%.
Beam TITAN an aluminum weighs approximately half of a beam out of of the same wooden length
The team works more quickly for the formwork and the dismantling
At the end of the lifetime, the beam aluminum preserves a still high residual value, aluminum is a metal easily which can be recycled, which is not the case of the beams out of wooden
Not need for crane
Applications
Formwork of flagstones
Proping of prédalles
Formwork of beams (with the executives TITAN U)
|
|
Built-in shock absorbers make these beams up to three times more durable ...
Benefit from the advantages of this robust beam:
* lower finishing costs
* ends are sealed to protect against moisture and ultraviolet light
* nailability
Positioning marks on the beam flanges for faster, safer setup ...
The marks on all standard lengths ensure
* rapidity, because the sizes are there to be seen
* safety, because the installation is easily checked
Names and logos discourage theft and encourage customer attention ...
Utilise the benefits of your own signage:
* your company's material is readily identifiable
* ideal means of discouraging potential thieves
* ready-made advertising
|
|
The girder is a central component for slab and wall formwork systems and choosing the right one is crucial in achieving the highest possible level of cost-effectiveness. The decisive factors are the durability and handling costs - not the original investment.
Through the high load-bearing capacity and rigidity of the GT 24 compared to other 20-cm high formwork girders, fewer girders, steel walers or props are required for both wall and slab formwork.
Due to the high proportion of synthetic resin in the high-grade timber web, the PERI VT girder is able to maintain its high level of dimensional stability and robustness. Steel caps, secured with side-to-side rivets, provide strong impact and edge protection and extend the service life of the girder.
The VT 20K has been specially developed for use with slab formwork, and is the low-price option for thinner slabs.
|
|
|
The innovative design of the Dokamatic table makes for even faster formwork handling whenever large floor slabs have to be cast. Standard functional components can be installed for straightforward, speedy and safe adaptation to changing requirements on the construction site.
|
|
H 20
Table form
Buildings with intricate ground plans and different storey heights, as frequently encountered in industrial, office and large residential buildings, are difficult to shutter. This is where our table forms are a recommendable solution with their high load-bearing ability.
|
|
The geometry of the building will determine your choice. Call our specialists - and they will make an economical proposal.
Standard table forms
are available in two sizes::
2.50 x 4.00 m and 2.50 x 5.00 m;
pre-assembled units; supplied ex stock.
This simplifies the handling on the jobsite.
|
|
Large-size formwork Athlete
A strong formwork for extremely high concrete pressure (par ex. self compacting concrete!) Large size-system for industrial construction, civil engineering works, tank construction, housing and business buildings
* Extremely few holes for ties (0.57 holes for ties per m²)
* Fast connection of elements by athlete clamp
* High stability and outstanding alignment thanks to frame depth of 16 cm
* Quick fixing of accessories by multi functional cross sections
* Standing and lying use of all panels
* Multi-purpose panel for corners, columns, stop-ends
* Balanced range of panels for systematic forming without cutting pieces on site
Panel widths (cm): 250 / 125 / 70 / 65 / 60 / 55 / 50 / 45 / 30
Panel heights (cm): 280 / 250 / 140 / 70
Frame depth (cm): 16
Plywood: 18 mm thick, 13-ply birch plywood
Max. concrete pressure: 92 kN/m² according DIN 18218
Tolerances of deflection: According DIN 18202, table 3, line 7
|
|
GF 24
Large-area formwork
Big challenges call for top performance. With our H20 web girder and our R24 lattice girder, you’ve got the best equipment there is. These are the basis for made-to-measure formwork strategies in which you yourself can decide on the element sizes, tying points, type of lining and concrete pressures.
|
|
The Transporter is Fraco's new multi purpose transport platform. It is the perfect access equipment to carry heavy building material including plasterboards, glazing panels, pallets of blocks and bricks, scaffold poles and so on.
• speed of 39 ft (11,9 m) per minute
• payload capacity of 8000 lbs (3630 kg)
• cabin length from 8 ft 4 in (2,5 m) to over 16 ft (4,9 m)
• loading volume of 568 ft 3 (16,1 m3)
|
|
Transport platform
SAFI introduced this year a new line of transport platforms with payload from 600 to 2000kg. this new hoist has been developed to transport both goods and persons.
The main feature of the new hoist are: manoeuvring either with a control panal aboard or with a remote control at the ground, double speed and a new access entry.
The introduction of this model made a great impact into the market.
|
|
|
|
|
|
ALTRAD plettac assco GmbH offers two complete sets of mobile scaffolds which again provide unique variability.
Both the plettac and the assco mobile scaffolds are made of aluminium. The light-weight components are small in number and flexible in application. They can be quickly assembled and disassembled and stand safe at any height as has been proven. Due to their robust design they have a long work-life.
plettac mobile aluminium safety scaffolds
The latest generation of plettac aluminium mobile safety scaffolds is based on the one-man-principle. This means, one person must be able to assemble and disassemble the mobile scaffold. We would like to especially recommend to you our best-selling models alu quick 80 and alu star 80.
assco rapido mobile aluminium scaffolds
The product line assco rapido consists of 5 different types of mobile aluminium scaffolds. All types use 11.9 kN wheels of 200 mm in diameter for any scaffold height. The most variable of the assco rapido mobile scaffolds is our assco rapido 4601.
|
|
KLIK HIGH CLEARANCE UNIT
DIMENSIONS
Available Lengths: 2m, 2.5m and 3m
Width 0.70m
Platform Level 1.5m
Unit Height 2.6m
(From bottom of castor to top of frame)
MANUFACTURED TO AND CERTIFIED TO A TUV ISO 9001:2008 QUALITY SYSTEM
This new unit is specifically designed by Euro Towers to be constructed over non movable objects such as desks, hedges, conveyers etc.
FEATURES
• 5” Castors for easy mobility
• Multi adjustable legs for use on an uneven surface.
• Plywood platform with a non-slip mesh phenol finish.
• 5 Rung Ladder for easy access to the platform.
• Guardrail that is incorporated into the existing frame so no
need for any extra components.
• Braces which are compatible with the ladder frame tower so can be interchanged.
OPTIONAL EXTRAS
• Toeboard Assembly (Softwood or Plywood)
• Base plates for a fixed unit
ANOTHER ACCESS PROBLEM SOLVED BY EURO TOWERS LTD
|
|
Mobile Work Scaffolds
Dimension: 46”H x 39”L x 21-1/2”W
Features:
Multi-level working area, and adjustable to various height.
Skid proof platforms.
Fits through doorways.
Folds down easily for compact storage.
500lbs capacity.
Weight: 53lbs (24kg)
|
|
KLIK 232 TOWER
The Euro Towers 232 tower conforms to TUV DIN BS EN 1004 European standard.
It is available in two widths: SINGLE WIDTH 0.7M WIDE and DOUBLE WIDTH 1.35M WIDE
TOWER FEATURES:
• Multi-start Square threaded adjustable legs, incorporating full nut for maximum security.
• The heavy duty splined spigot designed for maximum strength and rigidity and ease of tower assembly.
• The unique ten-impression crimped joint, specially designed to improve resistance to abuse, and reduce repair costs.
• Brace hook assembly, incorporating double torsion stainless steel spring for durable and reliable use.
• Platforms incorporating bolted hook extrusion for easy low cost repairability and platform profile designed to provide minimum deflection and improved strength.
• Increased trapdoor opening for ease of access.
• A range of trail/ non trail castors and base plates available.
|
|
Mobile aluminium towers
In all low level applications our mobile towers can provide a safe working platform. Mobile towers are stable frames mounted on castors, which can be quickly pushed from one location to the next and thus offer the ideal platform for maintenance and installation work. Our mobile aluminium towers are available in different basic versions. They are easy to transport and erect and have all the necessary safety features.
|
|
|
|
|
|
KLIK LADDER FRAME TOWER
The Euro Towers Ladder frame tower is approved to TUV BSEN 1004 European standard.
It is available in two widths: SINGLE WIDTH 0.7M WIDE and DOUBLE WIDTH 1.35M WIDE
Both single and double width ladder frames are available in three, four and five rung sizes to provide maximum platform options.
The tower comprises the minimum possible multi-purpose components, no separate ladders or guardrail frames are necessary.
All frames can be used as uppers or lowers simply brace your platform on the third rung below the top of the tower and the correct guardrail height is achieved.
LADDER FRAME TOWER FEATURES:
• Multi-start Square threaded adjustable legs, incorporating full nut for maximum security.
• The heavy duty splined spigot designed for maximum strength and rigidity and ease of tower assembly.
• The unique ten-impression crimped joint, specially designed to improve resistance to abuse, and reduce repair costs.
• Brace hook assembly, incorporating double torsion stainless steel spring for durable and reliable use.
• Platforms incorporating bolted hook extrusion for easy low cost repairability and platform profile designed to provide minimum deflection and improved strength.
• Increased trapdoor opening for ease of access.
• A range of trail/ non trail castors and base plates available.
|
|
|
|
|
|
The KT-Module scaffolding system
... is economical optimized through reduction of investment expenses, working hours, logistics, material, warehousing and transport.
... complies exceptionless to the requirements of the BetrSichV, DIN EN 12810 and DIN EN 12811.
... owns the unique german approval for façade scaffolds of class 4 with 3m fieldwidth.
... enables the practicable use of leading railing without additional parts.
... has no restrictions in choosing a point to fix the protective equipment against fall
Advantages and use:
The KT - Module "ONE FOR ALL" scaffolding system is suitable for every application.
No more investment in different scaffolding systems (for instance support and frame scaffolding).
Fewer parts and higher material durability signifies increased productivity.
Low start up investment costs with the possibility of system free plank use.
Decreased weight and assembly costs with fewer components.
The performance data of the KT-Module translates into higher load capacity, giving in addition potential material savings.
In façade scaffolding on the basis of higher knot rigidity a notable increase in load capacity on diagonal braces.
Feasible replacement of diagonal brace in facade scaffolding.
There are no "loose parts" on robust ledger, meaning less repairs.
Simple compulsion adjustments of the standard with one wedge strike.
Optional placement of inexpensive translucent PVC roof protection sheets and holders.
Technical safety optimized: "through placement of pure pipe ledgers" in conjunction with "self-securing plank system", "leading railing", and "dissolved frame construction".
|
|
The junction between standards, legers, transoms and braces is the core of ALTRAD plettac assco multidirectional system scaffolds. The junction enables quick and easy connection of load bearing items as well as reinforcing parts to each other with an enormous rigidity.
Flat disks are welded to the standards in equal distances of 50 cm. Ledgers/transoms and braces are connected to these disks by a system of casted heads and wedges.
Modular system scaffolds are suitable for industrial scaffold purposes where a bigger variety and larger capacities are required for birdcage scaffolds or special constructions.
ALTRAD plettac assco is supplying two different modular scaffolding systems:
Modular scaffold plettac contur
Modular scaffold assco futuro
Both systems are fully approved in Europe as well as in Germany.
|
|
MODEX
To be honest, there’s hardly anything that cannot be quickly and safely scaffolded with MODEX – large tanks as well as tall spires, mighty vaulted ceilings and intricate façades. Thanks to its versatile junction, MODEX adapts effortlessly to any shape, any ground plan and any height – and not only where façade scaffolds are required. For the construction of support structures, room scaffolds, grandstands, stages and stairways as well, MODEX has all the prerequisites.
|
|
|
|
|
|
PERI Modular Scaffolding – The system for difficult building structures
Scaffolding with standard components replaces tubes and couplers. The PERI UP Rosett node at a distance of 50 cm offers connection possibilities in all directions. Thus complex geometrical structures such as on historic buildings with bays and cantilevers, or towers and spire roofs, scaffolds can be erected economically.
The following versions are available:
PERI UP Rosett 70
PERI UP Rosett 100
PERI UP Rosett 150
Identical system and component dimensions make sure that you can combine T-frames and Rosett components in one structure. Because of the high load capacities of both versions, a simple rule for combining was enough to gain the approval from the site supervisors: Each part system is to be erected and anchored to the instructions on erection and use, no matter how they are combined.
Our customers are provided with a scaffold system whose supporting documents fully conform to structural stability and safe working regulations. In our instructions for assembly and use, which have been translated into numerous languages, the information is cleary presented.
PERI UP is a modular scaffold system which conforms to the European Standards EN 12810 and EN 12811.
|
|
P3D Platform Increased Safety
Compliant with standrad NFP 93.351
Automatic locking of the lower parts of the platform
Fixing with secured pegs
Bracing of panels up to 8.50m
|
|
TITAN Props
Quality products made from steel or aluminium
Schalungsstützen TITAN
Unique safety and low maintenance features make TITAN high-capacity post shores the most economical shores in the construction industry.
Advantages
* long service life due to automated production
* easy to turn threads
* simple handling
The TITAN props conform to
EN 1065, extension range from
1,70 to 5,50 m.
TITAN / MEGASHORES are not limited as they can easily be used
for larger heights.
|
|
EUROPLUSnew
Steel props
With five props each in the 20 kN and 30 kN classes, this tubular steel prop is a match for any task. Its variable lengths of up to 5.5 m and 4 m maximum cover all the required heights. The exceptionally good workmanship ensures trouble-free function and a long service life. The patented quick-lowering mechanism makes these props twice as quick to ease as conventional props.
|
|
|
|
|
|
ALU-TOP
The flexible aluminium prop system
Universal
ALU-TOP is a Hünnebeck prop system which offers a whole range of applications on every construction site. As single
prop, supporting tower, table form and folding leg table form.
A system for success
With a minimum of parts ALU-TOP ensures a maximum of versatility. One telescopic part, an extension piece in five lengths, and a frame in two widths. All pieces mutually compatible. This is the basic kit which will enable you to find a simple solution to any support problem. The benefits to you are maximum efficiency, low investment, low storage requirements. The top choice when it comes to versatility and cost-effectiveness.
Aluminum. Light-weight but heavy-duty
The solid aluminum props are staggeringly light. No part weighs more than 15.0 kg, and the largest complete single prop
weighs only 25 kg. Incidentally, aluminium throughout means recyclable throughout.
Half the weight, twice the strength
ALU-TOP is only half as heavy as comparable tubular steel props. Yet is capable of supporting over twice the load. Up to
40 kN as a single prop. In this way you cut down on props, materials and working time.
|
|
The Transporter is Fraco's new multi purpose construction hoist. It is the perfect access equipment to carry heavy building material including plasterboards, glazing panels, pallets of blocks and bricks, scaffold poles and so on.
• speed of 100 ft (30,5 m) per minute
• payload capacity of 8000 lbs (3630 kg)
• cabin length from 8 ft 4 in (2,5 m) to over 16 ft (4,9 m)
• loading volume of 568 ft 3 (16,1 m3)
|
|
Hoist
SAFI’s production range also includes rack and pinion site hoists. These systems are also modular and in most cases use the same structural components as the mast climbing work platforms which allow an efficient management and a consequent drastic reduction in site costs for the client.
The range covers from small 500 kg material hoist JOLLY JUNIOR to large 2500 kg double cabin material hoist VISION/ZENITH with high speed movement.
|
|
|
|
Formworks, Scaffolding
