|
|
SCAFFOLD SHEETING
Tried, tested and proven in the toughest of climates. 100% waterproof and UV stabilise
New improved webbing with extra reinforcement and eyelets at close intervals of 10cm
Ideal for indoor and outdoor application
Applications
Scaffold Sheeting
Weather protection (water proof)
Taurpauling
Dust Protection
Composition: Reinforced low density polyethylene
Reinforcement: 2400 Denier polypropylene yarn spaced 9m x 9m
Lamination: Clear 100 micron. Both sides
Thickness: 200 micron
Weight: 200g/m2
Colour: Clear
Temperature Range: -40ºC to +80ºC
Conforms to: BS3432 and BS8093 CP
Roll Size:
2mx 45m
3m x 45m
|
|
"Suspended scaffolding - suspended platform"
The MODULECO® suspended platform is used to carry out temporary façade work (high pressure cleaning, refacing, exterior insulation, etc.).
MODULECO® is designed in aluminium and does not spoil over time. Light-weight, the suspended platform is also very flexible: from 2 to 16 metres long.
It can be used with different suspension systems: Parapet clamps, suspension beams and the FIXEO® suspension system on mast.
|
|
|
|
|
|
The KT-Module scaffolding system
... is economical optimized through reduction of investment expenses, working hours, logistics, material, warehousing and transport.
... complies exceptionless to the requirements of the BetrSichV, DIN EN 12810 and DIN EN 12811.
... owns the unique german approval for façade scaffolds of class 4 with 3m fieldwidth.
... enables the practicable use of leading railing without additional parts.
... has no restrictions in choosing a point to fix the protective equipment against fall
Advantages and use:
The KT - Module "ONE FOR ALL" scaffolding system is suitable for every application.
No more investment in different scaffolding systems (for instance support and frame scaffolding).
Fewer parts and higher material durability signifies increased productivity.
Low start up investment costs with the possibility of system free plank use.
Decreased weight and assembly costs with fewer components.
The performance data of the KT-Module translates into higher load capacity, giving in addition potential material savings.
In façade scaffolding on the basis of higher knot rigidity a notable increase in load capacity on diagonal braces.
Feasible replacement of diagonal brace in facade scaffolding.
There are no "loose parts" on robust ledger, meaning less repairs.
Simple compulsion adjustments of the standard with one wedge strike.
Optional placement of inexpensive translucent PVC roof protection sheets and holders.
Technical safety optimized: "through placement of pure pipe ledgers" in conjunction with "self-securing plank system", "leading railing", and "dissolved frame construction".
|
|
|
|
|
|
KLIK STAIRWELL UNIT
MANUFACTURED TO A TUV ISO 9001:2008 QUALITY CONTROL SYSTEM
• The need for safe access on both industrial and domestic stairwells has long been a problem for the hire industry.
• EuroTowers offer the Stairwell Access unit.
• The basic stairwell pack provides platform levels of 1.5m and 2.7m, 0.7m wide, and features special narrow base plates, and non-slip platform boards.
• Easy access from both sides of the stairwell unit to the platform is provided by a ‘walk through ladder frame’. Simply walk through the frame and climb up the ladder.
This frame is design solves the access problems experienced on narrow and domestic staircases.
• Features 4 adjustable base plates designed for a fixed unit and can be adjusted if not on level ground
• Integrated access frame so access on the staircase can still be obtained.
OPTIONAL EXTRAS AVAILABLE…
• Extension pack to raise the platform level from 2.7m to 4.20m from the lowest step
• Aluminium Toeboard assembly
• Additional side props for extra support on narrow applications
MAX SAFE WORKING LOAD 250KG
UNIT WEIGHT 51.0KGS
ANOTHER ANSWER TO YOUR ACCESS QUESTIONS FROM EUROTOWERS LTD
|
|
|
We manufacture all prevalent types and styles of frame scaffoldings. Quality is strictly secured based on ISO9001 systems and OEM requirements. With a quality workforce, all scaffold frames are manufactured of high strength alloyed tubes, supplied by premium steel mills, to meet or exceed ANSI, OSHA and CSA standards.
|
|
|
Pilosio Scaffolding are built to be adapted to any type of worksite, thanks to the modularity of the elements, its easy assembly and handling and the strength of materials.
|
|
Aluminium mobile scaffold
for a great variety of applications. The scaffold weighs only 40 kg and allows for a working load of 1 kN/m². It can be extended by 1.00 m with a height extension. Any works in heights up to 4.00 m can thus be carried out safely.
|
|
|
|
|
|
EZ TOWER
MANUFACTURED TO A TUV ISO 9001:2008 QUALITY CONTROL SYSTEM
Euro Towers introduces the new EZ Tower which is available in both Single (0.80m) and Double width (1.40m)
AVAILABLE PLATFORM HEIGHTS…
Single Width
2m, 3m, 4m, 5m, 6m, 7m and 8m
Double Width
2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10, 11m and 12m
The EZ tower conforms to EN BS EN 1004 and national safety standards.
And can be erected using the 3T Method.
• Multi-start Square threaded adjustable legs, incorporating full nut for maximum security.
• The spigot is designed for maximum strength and rigidity and ease of tower assembly.
• The unique ten-impression crimped joint, specially designed to improve resistance to abuse, and reduce repair costs.
• Brace hook assembly, incorporating double torsion stainless steel spring for durable and reliable use.
• Platforms incorporating bolted hook extrusion for easy low cost repairability and platform profile designed to provide minimum deflection and improved strength.
• Increased trapdoor opening for ease of access.
• A range of trail/ non trail castors and base plates available.
|
|
Consolidation of grounds by autoforant anchoring with injection: Micropieux, ties and nails
The process of autoforage ISCHEBECK allows the simultaneous realization of the operations of drilling and injection by its bored edge. This technique thus removes the installation and the extraction of borehole allowing time-savings and the labor tube.
The system of anchoring autoforant ISCHEBECK makes it possible to carry out all the building sites of confortement and proves to be essential for the difficult grounds as well as the lifting building sites or of limited spaces.
Applications:
Realization of micropieux, ties and nails
Confortement of structure of a building
Confortement of ripe, slope, vault in tunnel
Underpinning of existing foundations
Stabilization of fill, rock faces
Consolidation of the electric foundations of pylons...
|
|
|
The climbing formwork MF 240 is the key to regular work cycles on all high structures. Of straightforward design, this system can be adapted to a very wide range of field requirements.
|
|
SCF
Self-climbing formwork
SCF is a formwork system that climbs step by step with the building with the aid of an inbuilt hydraulic device instead of a crane – smoothly, swiftly and without vibration. All the platforms stay horizontal, as the SCF hydraulics operates with a height tolerance of max. 1% of the cylinder stroke – even when up to 16 brackets are operated simultaneously.
|
|
Aluminium Shoring System GASS
Aluminium shoring system to discharge heavy loads coming from great heights useful in every construction area
* To be used as shoring system, table form, load-tower, single support
* Low weight parts
* Up to 6.5 m height only one leg
* Variable thanks to 8 connection possibilities at one leg
* Fast wedge link for connection frame/leg
* Frame height 1 m usable as security railing at an all-over live load of 1.5 kN/m²
* Complete table form unit movable by crane
Dimensions: Leg length 467 / 358 / 249 / 140 cm
Frame width 120 / 180 / 240 / 300 cm
Max. Load: Max. load per leg 140 kN
|
|
Staxo 100
The ultra-heavy-duty, easy-to-use load-bearing tower made of steel, complete with built-in safety
Staxo 100 has all the tried-and-tested advantages of Staxo - robustness, ease of use, versatility. Now a comprehensive safety package has been integrated as well, and load-bearing strength significantly increased.
|
|
MEVA offers a cost-saving, safe and economical alternative solution to form high columns or circular columns: the shoring tower Space.
The tower segments with a square dimension of 4.80 m are preassembled at ground level and connected with screws. The system provides tower units with a height of 3.00 m and extensions of 0.50 m and 1.00 m. With these you can build a safe access to building parts at almost any height – even of more than 30 m. At the same time the shoring tower Space serves to brace and align the formwork. Wind loads can also be transferred into the shoring tower
|
|
The right shoring system for each application
The different slab formwork systems, in connection with falsework and support constructions at large heights, require different systems depending on the scaffold tower height and loads to be carried. The most important criterion when selecting a shoring system is the level of adaptability to the formwork to be used.
With its extensive programme, PERI offers the most economical solution for each application in the area of scaffold systems and slab tables.
ST 100 Stacking Tower
PD 8 Table System and Shoring Tower
MULTIPROP System
PERI UP Rosett Shoring Tower
|
|
The youngest member of Fraco's family, the ACT-4 work platform combines safety, quickness and flexibility. It distinguishes itself by its multi trade profile and it represents the best choice for specialized contractors such as masons, repointers, glaziers, painters, plasterers, and general contractors involved in inspection, renovation, building maintenance, etc.
Used with one or two masts, this system of cantilevers and bridges is the solution to vertical access problems encountered during construction projects and other special works.
The endless screw mechanism of the ACT-4 allows quick elevation and exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 47 ft (14,3 m);
* a load capacity of 4 000 lb (1 815 kg);
* a lifting speed of 16 ft (4,9 m) per minute.
As another benefit, the ACT-4 has the ability to share its mast sections with the heavier model, the ACT-8; this is a new way to maximize your investment.
|
|
Designed to satisfy the needs of small- to mid-size construction companies, the FRSM-1500 work platform combines safety, lightness and mobility for all residential projects or small- to mid-size job sites or tight access areas.
This versatile platform represents the ideal tool which allows masons, painters, roof sheeters and cladders, glaziers and other professionals, to realize works of inspection, maintenance and restoration, or different types of facade projects. It can also be used for special applications.
Its ball and track mechanism calls for minimum maintenance and gives the FRSM-1500 a smooth, quick and silent operation. Assembled with one mast, this system offers:
* a maximum length of 28 ft (8,5 m);
* a load capacity of 1 500 lb (680 kg);
* a lifting speed of 14 ft (4,2 m) per minute.
|
|
Designed to satisfy the needs of masonry contracting companies, the FRSM-20K work platform combines safety, sturdiness and capacity for mid- to large-size job sites.
Used with one or two masts, this system of cantilevers, bridges and forward extension allows users to benefit from over 130 different configurations. Ideal for construction projects up to 80 ft (25 m) in height, the FRSM-20K also distinguishes itself when comfort, safety and performance in high altitude are required.
Its lifting hook mechanism calls for minimum maintenance and gives the FRSM-20K all the power required. Assembled with one mast, this system offers:
* a maximum length of 48 ft (14,6 m);
* a load capacity of 10 000 lb (4 540 kg);
* a lifting speed of 7 ft (2,1 m) per minute.
|
|
The ACT-8 work platform combines safety, power and flexibility. It distinguishes itself by its versatility and represents the best choice for contractors specialized in repointing, glazing, E.I.F.S., curtain walls installation, metal framing, etc.
Used with one or two masts, this system of cantilevers, bridges and forward extension is the solution to vertical access problems encountered during inspection, restoration and maintenance of buildings and structures. It is also an access solution for industrial projects.
The endless screw mechanism of the ACT-8 allows elevation at variable speed and an exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 50 ft (15,2 m);
* a load capacity of 8 000 lb (3 630 kg);
* a lifting speed up to 39 ft (11,9 m) per minute.
|
|
|
|
|
|
Single mast climbing work platform
As a leader in the production of mast climbing platforms, today SAFI has a range of products which covers from the smallest single mast climbing work platform for small restoration work with the “JOLLY JUNIOR” to large twin mast climbing work platforms for heavier constructions work like the “VISION 4000”, for working surfaces over 100m high and 35m long.
The strong point of all the models is the modular composition, both height-wise and lengthwise, which means enormous saving on construction site costs.
There are many versions for all types of machines : single mast, twin mast , wheel mounted for road or construction site use and special versions.
All models had the ministerial authorizations before the machine directive of 1997 and several international certificates such as the German TUV GS , the French ATS, the Italian OCE.
After the introduction of new regulations in the European Community all equipments were conformed to the safety standards and obtained the European certification from Italian and International boards with the related CE mark.
|
|
Flexible slab formwork PASCHAL Deck for slabs in housing- and business constructions
* Less numbers of different parts
* Optimum use of material
* Suitable for all slab thicknesses
* Flexible adjustment by overlapping girders
* Low weight of the parts
* Optimal adjustment to every layout
* Free choice of plywood
Dimensions: Girder length 600 / 490 / 390 / 360 / 330 /
290 / 245 cm
Max. Load: Max. shear force 11 kN
Max. bending moment 5 kNm
|
|
Slab formwork ideally suited for construction sites without crane availability and where aluminium is not the material of choice
- Can be combined with Modular panels
- Beam solution with Modular panels workable
- Combination of different possible applications
Possible applications:
- Support of panels with props/shoring system
- Panels shall be placed on the beams
- Panels shall be placed between beams, if necessary with drop head
Technical data
Panel dimensions
60x125 cm, 45x125 cm, 30x125 cm
60x120 cm, 45x120 cm, 30x120 cm
60x90 cm, 60x85 cm, 60x60 cm, 60x55 cm
30x60 cm, 30x55 cm
Material
Steel frame, depth 7.5 cm
Plywood
12 mm thick, 9-ply birch plywood
Beams
Length 235 cm (with drop head 250 cm)
Length 165 cm (with drop head 180 cm)
Slab thickness
up to 30 cm
Max. single weight
~20 kg
|
|
|
|
|
|
Rapidly assembles and disassembles allowing for a considerable reduction in rotation time of jobsite casting.
SlabForm can be manually moved and is entirely in aluminium (the weight of each component is less than 16 kg). The system's modularity (150x75 cm base panel) allows you to create any geometric shape to share time.
SlabForm is suitable for any typology of manufactured product, such as: auto-silos, shopping malls, industrial plants, and in particular in the sector of residential construction. The reduced number of props (1 prop every 3.45 m2) allows the realization of reinforced surfaces that are perfectly useable and can also be utilized for the warehousing of construction materials.
What is more, the simplicity of the components allows the personnel to carry out the phases of assembly and disassembly in total safety.
The SlabProp props aluminum vary in heights from 2.0 to 5.20 m. They can bear up to 74.48 KNs, and when matched with the drop heads allow the recovery of all the layout's panels and beams, holding the slab until the maturation has occurred.
A simple hammer hit frees up and lowers the head's stirrup 6-7 cm allowing for the easy recovery of all the layout's panels and beams. With a second supply of props you can proceed to the subsequent casting phase.
|
|
|
|
|
|
TITAN HV Slab Forming System
The aluminium system slabform
Alu-Deckenschalung TITAN HV
Advantages
* drop-head system
* excellent economics
* simple handling
* safe working
The System
TITAN HV is the well proven slabforming system with aluminium beams, which solves each formwork job fast and economical - without labour and cost intensive adjustments and fillers. TITAN HV can be used without crane handling.
The idea
Unlike traditional beam systems the V shaped main beams and the H shaped secondary beams of the TITAN HV are on the same level. This is enabled by support grooves on the main, secondary and drop heads in which the neighboring
beams are positioned. This means that the inefficient and uneconomical overlap of beams, as with traditional beam systems, does not occur. The HV beams
automatically build up as a rigid interlocking grid, without the need for plywood as bracing. Flexibility in use is not sacrificed with the HV System. The grid of the beams is variable and by placing a main beam into another main beam the
direction of the secondary beams change. Complications like columns, wall corners, make-up pieces, curved walls etc. no longer create problems. The main and secondary beams can be placed in any position.
The drop head system allows stripping just 2 days after the pour. All main and secondaries come free, and can be used for the next section. Practice has shown that the TITAN HV System cuts the total forming operation down by at least 0.1 h/m² (productivity gains of 0.3 m² ( 3.3 sqft ) per man hour).
These labour savings can more than compensate for the cost of hiring
the system.
|
|
|
Dokaflex 1-2-4 is the fast, versatile floor formwork for floorplans of any shape, for beams, slab overhangs and semifinished floor elements – and the ready reckoner is ideal for calculating the quantities of materials, so there's no need for formwork planning. The free choice of formwork sheets leaves nothing to be desired when it comes to the finished structure of the fair-face concrete.
|
|
VARIOMAX
Timber beam formwork
VARIOMAX is a modern timber beam system enabling you to realize any kind of soffit – any ground plan, slab size and slab thickness – with ease. All the VARIOMAX parts are distinguished by their superlative quality and high functionality. Timber beams, props and formwork panels form a perfect line-up helping you to effortlessly master any challenge.
|
|
MevaDec: drop head-beam-panel-method
As with the primary-and-secondary-beam-method the support system consists of primary beams and drop heads. It supports the ready-made panels. The patented drop head permits the early striking of primary beams and panels. This method is especially suited for ground plans with great dimensions.
|
|
PERI SKYDECK
The Tested Panelized Slab Formwork System for Slab Thicknesses up to 95 cm
SKYDECK with drophead system
Striking can be carried out after only one day (depending on the slab thickness and strength of concrete). The panels are easier to detach from the concrete, materials handling is accelerated, and the qunatity of materials is reduced.
Less cleaning means shorter shuttering times
This is possible due to the plastic rack, powder coating and the special design. The SKYDECK main beams lie protected under the panels. The panel as well as the main beams have integrated self-draining edges. The edges of the panels are also undercut which keeps cleaning to a minimum.
|
|
|
|
|
|
KLIK MINIFOLD UNIT
MANUFACTURED TO A TUV ISO 9001:2008 QUALITY CONTROL SYSTEM
For all those tight corners where height and space is limited, gain speedy, easy access with the Euro Towers Klik Minifold Unit.
• Ideal for one man use, unfold the unit, fit the board and start work.
• Easily portable and manoeuvrable, either open or closed, the unit passes easily through standard doorways.
• Both lightweight and robust.
• Provides a working platform 0.7m wide and 1.5m long.
• Six optional platform levels between 0.2m and 1.7m will suit most requirements.
• Fitted with lockable 5” castors and non-slip platform boards.
• Captive folding bracing system means minimum components. When closed the board will hook onto the unit for compact storage.
• Easily transportable, folds flat to fit in a small van, or on a roof rack.
• Larger castors, adjustable legs, guardrails and toeboards are all available as optional extras.
OPTIONAL EXTRAS AVAILABLE…
• Toeboard assembly – soft wood and aluminium
• Guardrail Pack comprising of 4 braces and 2 frames – designed for when the unit is being used at its maximum platform level of 1.8m
ANOTHER ANSWER TO YOUR ACCESS QUESTIONS FROM EUROTOWERS LTD
|
|
|
|
Formworks, Scaffolding
